Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2403.02179 · Scientific Reports

Aluminum Josephson junction microstructure and electrical properties modified by thermal annealing

Nikita D. Korshakov, Dmitry O. Moskalev, Anastasia A. Soloveva, Daria A. Moskaleva, Evgeniy S. Lotkov, Artem R. Ibragimov, Margarita V Androschuk, Ilya A. Ryzhikov, Yuri V. Panfilov, Ilya A. Rodionov

Published Oct 30, 2024• 14 citations
arXivHTMLPDF

Abstract

Reproducibility of Al/AlO x /Al Josephson junctions is a challenge for scaling up superconducting quantum processors. The frequency uncertainty of the transmon qubits arising from the fabrication process is attributed to deviations in the Josephson junction microstructure and electrical properties. Here, we present a solution for this problem using the post-fabrication Josephson junction thermal annealing process. The developed thermal post-exposure method allows not only to increase the junction resistance by 175%, but also to decrease by 60% with a step of 10% in R n , which opens up new possibilities for tuning the frequency of qubits. The resistance is shown to be strongly temperature dependent, and is weakly dependent on the holding time. The linear dimensions of the electrodes and the sidewalls contribution to the total JJ area also have a significant impact on the final resistance after annealing. Finally, a theoretical model of the structure modification in a tunnel barrier with changes in oxygen concentration gradient is proposed. The proposed thermal annealing approach can be used to form stable and reproducible tunnel barriers and scalable frequency trimming for widely used fixed-frequency transmon qubits.

DOI
10.1038/s41598-024-74071-7

Related papers

Simplified Josephson-junction fabrication process for reproducibly high-performance superconducting qubits

Amr Osman, J. Simon, Andreas Bengtsson +7 more

We introduce a simplified fabrication technique for Josephson junctions and demonstrate superconducting Xmon qubits with T1 relaxation times averaging above 50 μs (Q>1.5×106). Current shadow-evaporation techniques for aluminum-based Josephson junctions require a separate lithography step to deposit a patch that makes a galvanic, superconducting connection between the junction electrodes and the circuit wiring layer. The patch connection eliminates parasitic junctions, which otherwise contribute significantly to dielectric loss. In our patch-integrated cross-type junction technique, we use one lithography step and one vacuum cycle to evaporate both the junction electrodes and the patch. This eliminates a key bottleneck in manufacturing superconducting qubits by reducing the fabrication time and cost. In a study of more than 3600 junctions, we show an average resistance variation of 3.7% on a wafer that contains forty 0.5×0.5-cm2 chips, with junction areas ranging between 0.01 and 0.16 μm2. The average on-chip spread in resistance is 2.7%, with 20 chips varying between 1.4% and 2%. For the junction sizes used for transmon qubits, we deduce a wafer-level transition-frequency variation of 1.7%–2.5%. We show that 60%–70% of this variation is attributed to junction-area fluctuations, while the rest is caused by tunnel-junction inhomogeneity. Such high frequency predictability is a requirement for scaling-up the number of qubits in a quantum computer.

arXiv:2011.05230•Applied Physics Letters•Feb 8, 2021•104 citations

Electrical post-fabrication tuning of aluminum Josephson junctions at room temperature

Christian Križan, Maurizio Toselli, Irshad Ahmad +11 more

Josephson junctions are key elements of superconducting quantum technology, serving as the core building blocks of superconducting qubits. We present an experimental study on room-temperature electrical tuning of aluminum junctions, showing that voltage pulses can controllably increase their resistance and adjust the Josephson energy while maintaining qubit quality factors above 1 million. We find that the rate of resistance increase scales exponentially with pulse amplitude during manipulation. Following the manipulation, the resistance increases spontaneously through contributions proportional to both the initial resistance and the preceding manipulation. We show that this spontaneous increase halts at cryogenic temperatures, and resumes again at room temperature. Using our stepwise protocol, we achieve up to a 270% increase in junction resistance, corresponding to a reduction of nearly 2 GHz of the qubit transition frequency. These results establish the achievable range, relaxation behavior, and practical limits of electrical tuning, enabling post-fabrication mitigation of frequency crowding in quantum processors.

quant-pharXiv:2602.20002•Materials for Quantum Technology•Feb 24, 2026•2 citations

Impact of fabrication history induced disorder on Josephson junction reproducibility and qubit performance

Dae-Yun Kim, Hyeokshin Kwon, Dae Seok Han +8 more

Reproducible Josephson junction (JJ) characteristics are essential for frequency-deterministic and scalable superconducting quantum processors. We show that the normal-state resistance and its reproducibility in Al/AlOx/Al JJs are governed not by oxide thickness, but by fabrication-history–induced disorder in the tunneling barrier. By comparing junctions fabricated on bare wafers, lift-off–processed base layers, and dry-etched base layers under identical oxidation conditions, we observe large differences in resistance and wafer-to-wafer variability. Atomic force microscopy reveals distinct surface disorder imprinted by prior fabrication steps, while cross-sectional transmission electron microscopy show that the average AlOx barrier thickness is comparable across the three fabrication histories within experimental uncertainty. The enhanced resistance on rough, plasma-damaged surfaces therefore originates from nanoscale barrier disorder rather than thickness variations. These results establish fabrication history as a key determinant of JJ barrier quality and highlight the need for holistic process control to achieve deterministic qubit frequency targeting.

Scientific Reports•Apr 10, 2026•1 citation

Alternating-bias assisted annealing of amorphous oxide tunnel junctions

David P. Pappas, Mark Field, Cameron Kopas +12 more

Superconducting quantum bits (qubits) rely on ultra-thin, amorphous oxide tunneling barriers that can have significant inhomogeneities and defects as grown. This can result in relatively large uncertainties and deleterious effects in the circuits, limiting the scalability. Finding a robust solution to the junction reproducibility problem has been a long-standing goal in the field. Here, we demonstrate a transformational technique for controllably tuning the electrical properties of aluminum-oxide tunnel junctions. This is accomplished using a low-voltage, alternating-bias applied individually to the tunnel junctions, with which resistance tuning by more than 70% can be achieved. The data indicates an improvement of coherence and reduction of two-level system defects. Transmission electron microscopy shows that the treated junctions are predominantly amorphous, albeit with a more uniform distribution of alumina coordination across the barrier. This technique is expected to be useful for other devices based on ionic amorphous materials. Amorphous aluminum oxide tunnel junctions are important for cryogenic and room temperature devices. Here, the authors demonstrate the use of alternating-bias-assisted annealing for transforming and tuning transmon qubit junctions, where giant increases in excess of 70% in the room temperature resistance can be achieved.

arXiv:2401.07415•Communications Materials•Aug 12, 2024•39 citations

Fabrication of Al/AlOx/Al junctions with high uniformity and stability on sapphire substrates

Yuzhen Zheng, Shuming Li, Zengqian Ding +3 more

Abstract Tantalum and aluminum on sapphire are widely used platforms for qubits of long coherent time. As quantum chips scale up, the number of Josephson junctions on sapphire increases. Thus, both the uniformity and stability of the junctions are crucial to quantum devices, such as scalable superconducting quantum computer circuit, and quantum-limited amplifiers. By optimizing the fabrication process, especially, the conductive layer during the electron beam lithography process, Al/AlO x /Al junctions of sizes ranging from 0.0169 to 0.04 µm 2 on sapphire substrates were prepared. The relative standard deviation of room temperature resistances ( R N ) – $${\upsigma }_{{R_{{\text{N}}} }} /\left\langle {R_{{\text{N}}} } \right\rangle$$ σ R N / R N of these junctions is better than 1.7% on 15 mm × 15 mm chips, and better than 2.66% on 2 inch wafers, which is the highest uniformity on sapphire substrates has been reported. The junctions are robust and stable in resistances as temperature changes. The resistances increase by the ratio of 9.73% relative to R N as the temperature ramp down to 4 K, and restore their initial values in the reverse process as the temperature ramps back to room temperature. After being stored in a nitrogen cabinet for 100 days, the resistance of the junctions changed by1.16% on average. The demonstration of uniform and stable Josephson junctions in large area paves the way for the fabrication of superconducting chip of hundreds of qubits on sapphire substrates.

arXiv:2305.10956•Scientific Reports•Jul 22, 2023•12 citations

Electron-beam annealing of Josephson junctions for frequency tuning of quantum processors

Yashwanth Balaji, Narendra Acharya, Robert Armstrong +7 more

Superconducting qubits are a promising route to achieving large-scale quantum computers. A key challenge in realising large-scale superconducting quantum processors involves mitigating frequency collisions. In this paper, we present an approach to tuning fixed-frequency qubits with the use of an electron beam to locally anneal the Josephson junction. We demonstrate the ability to both increase and decrease the junction barrier resistance. The technique shows an improvement in wafer scale frequency targetting by assessing the frequency collisions in our qubit architecture. Coherence measurements are also done to evaluate the performance before and after tuning. The tuning process utilises a standard electron beam lithography system, ensuring reproducibility and implementation by any group capable of fabricating these Josephson junctions. This technique has the potential to significantly improve the performance of large-scale quantum computing systems, thereby paving the way for the future of quantum computing.

arXiv:2402.17395•Feb 27, 2024•17 citations
Reproducibility of Al/AlO x /Al Josephson junctions is a challenge for scaling up superconducting quantum processors. The frequency uncertainty of the transmon qubits arising from the fabrication process is attributed to deviations in the Josephson junction microstructure and electrical properties. Here, we present a solution for this problem using the post-fabrication Josephson junction thermal annealing process. The developed thermal post-exposure method allows not only to increase the junction resistance by 175%, but also to decrease by 60% with a step of 10% in R n , which opens up new possibilities for tuning the frequency of qubits. The resistance is shown to be strongly temperature dependent, and is weakly dependent on the holding time. The linear dimensions of the electrodes and the sidewalls contribution to the total JJ area also have a significant impact on the final resistance after annealing. Finally, a theoretical model of the structure modification in a tunnel barrier with changes in oxygen concentration gradient is proposed. The proposed thermal annealing approach can be used to form stable and reproducible tunnel barriers and scalable frequency trimming for widely used fixed-frequency transmon qubits.
We introduce a simplified fabrication technique for Josephson junctions and demonstrate superconducting Xmon qubits with T1 relaxation times averaging above 50 μs (Q>1.5×106). Current shadow-evaporation techniques for aluminum-based Josephson junctions require a separate lithography step to deposit a patch that makes a galvanic, superconducting connection between the junction electrodes and the circuit wiring layer. The patch connection eliminates parasitic junctions, which otherwise contribute significantly to dielectric loss. In our patch-integrated cross-type junction technique, we use one lithography step and one vacuum cycle to evaporate both the junction electrodes and the patch. This eliminates a key bottleneck in manufacturing superconducting qubits by reducing the fabrication time and cost. In a study of more than 3600 junctions, we show an average resistance variation of 3.7% on a wafer that contains forty 0.5×0.5-cm2 chips, with junction areas ranging between 0.01 and 0.16 μm2. The average on-chip spread in resistance is 2.7%, with 20 chips varying between 1.4% and 2%. For the junction sizes used for transmon qubits, we deduce a wafer-level transition-frequency variation of 1.7%–2.5%. We show that 60%–70% of this variation is attributed to junction-area fluctuations, while the rest is caused by tunnel-junction inhomogeneity. Such high frequency predictability is a requirement for scaling-up the number of qubits in a quantum computer.
Josephson junctions are key elements of superconducting quantum technology, serving as the core building blocks of superconducting qubits. We present an experimental study on room-temperature electrical tuning of aluminum junctions, showing that voltage pulses can controllably increase their resistance and adjust the Josephson energy while maintaining qubit quality factors above 1 million. We find that the rate of resistance increase scales exponentially with pulse amplitude during manipulation. Following the manipulation, the resistance increases spontaneously through contributions proportional to both the initial resistance and the preceding manipulation. We show that this spontaneous increase halts at cryogenic temperatures, and resumes again at room temperature. Using our stepwise protocol, we achieve up to a 270% increase in junction resistance, corresponding to a reduction of nearly 2 GHz of the qubit transition frequency. These results establish the achievable range, relaxation behavior, and practical limits of electrical tuning, enabling post-fabrication mitigation of frequency crowding in quantum processors.
Reproducible Josephson junction (JJ) characteristics are essential for frequency-deterministic and scalable superconducting quantum processors. We show that the normal-state resistance and its reproducibility in Al/AlOx/Al JJs are governed not by oxide thickness, but by fabrication-history–induced disorder in the tunneling barrier. By comparing junctions fabricated on bare wafers, lift-off–processed base layers, and dry-etched base layers under identical oxidation conditions, we observe large differences in resistance and wafer-to-wafer variability. Atomic force microscopy reveals distinct surface disorder imprinted by prior fabrication steps, while cross-sectional transmission electron microscopy show that the average AlOx barrier thickness is comparable across the three fabrication histories within experimental uncertainty. The enhanced resistance on rough, plasma-damaged surfaces therefore originates from nanoscale barrier disorder rather than thickness variations. These results establish fabrication history as a key determinant of JJ barrier quality and highlight the need for holistic process control to achieve deterministic qubit frequency targeting.
Superconducting quantum bits (qubits) rely on ultra-thin, amorphous oxide tunneling barriers that can have significant inhomogeneities and defects as grown. This can result in relatively large uncertainties and deleterious effects in the circuits, limiting the scalability. Finding a robust solution to the junction reproducibility problem has been a long-standing goal in the field. Here, we demonstrate a transformational technique for controllably tuning the electrical properties of aluminum-oxide tunnel junctions. This is accomplished using a low-voltage, alternating-bias applied individually to the tunnel junctions, with which resistance tuning by more than 70% can be achieved. The data indicates an improvement of coherence and reduction of two-level system defects. Transmission electron microscopy shows that the treated junctions are predominantly amorphous, albeit with a more uniform distribution of alumina coordination across the barrier. This technique is expected to be useful for other devices based on ionic amorphous materials. Amorphous aluminum oxide tunnel junctions are important for cryogenic and room temperature devices. Here, the authors demonstrate the use of alternating-bias-assisted annealing for transforming and tuning transmon qubit junctions, where giant increases in excess of 70% in the room temperature resistance can be achieved.
Abstract Tantalum and aluminum on sapphire are widely used platforms for qubits of long coherent time. As quantum chips scale up, the number of Josephson junctions on sapphire increases. Thus, both the uniformity and stability of the junctions are crucial to quantum devices, such as scalable superconducting quantum computer circuit, and quantum-limited amplifiers. By optimizing the fabrication process, especially, the conductive layer during the electron beam lithography process, Al/AlO x /Al junctions of sizes ranging from 0.0169 to 0.04 µm 2 on sapphire substrates were prepared. The relative standard deviation of room temperature resistances ( R N ) – $${\upsigma }_{{R_{{\text{N}}} }} /\left\langle {R_{{\text{N}}} } \right\rangle$$ σ R N / R N of these junctions is better than 1.7% on 15 mm × 15 mm chips, and better than 2.66% on 2 inch wafers, which is the highest uniformity on sapphire substrates has been reported. The junctions are robust and stable in resistances as temperature changes. The resistances increase by the ratio of 9.73% relative to R N as the temperature ramp down to 4 K, and restore their initial values in the reverse process as the temperature ramps back to room temperature. After being stored in a nitrogen cabinet for 100 days, the resistance of the junctions changed by1.16% on average. The demonstration of uniform and stable Josephson junctions in large area paves the way for the fabrication of superconducting chip of hundreds of qubits on sapphire substrates.
Superconducting qubits are a promising route to achieving large-scale quantum computers. A key challenge in realising large-scale superconducting quantum processors involves mitigating frequency collisions. In this paper, we present an approach to tuning fixed-frequency qubits with the use of an electron beam to locally anneal the Josephson junction. We demonstrate the ability to both increase and decrease the junction barrier resistance. The technique shows an improvement in wafer scale frequency targetting by assessing the frequency collisions in our qubit architecture. Coherence measurements are also done to evaluate the performance before and after tuning. The tuning process utilises a standard electron beam lithography system, ensuring reproducibility and implementation by any group capable of fabricating these Josephson junctions. This technique has the potential to significantly improve the performance of large-scale quantum computing systems, thereby paving the way for the future of quantum computing.