Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2401.07415 · Communications Materials

Alternating-bias assisted annealing of amorphous oxide tunnel junctions

David P. Pappas, Mark Field, Cameron Kopas, Joel Howard, Xiqiao Wang, Ella Lachman, Jin‐Su Oh, Lin Zhou, Alysson Gold, Gregory M. Stiehl, Kameshwar K. Yadavalli, Eyob Alebachew Sete, Andrew J. Bestwick, Matthew Joseph Kramer, J. Mutus

Published Aug 12, 2024• 39 citations
arXivHTMLPDF

Abstract

Superconducting quantum bits (qubits) rely on ultra-thin, amorphous oxide tunneling barriers that can have significant inhomogeneities and defects as grown. This can result in relatively large uncertainties and deleterious effects in the circuits, limiting the scalability. Finding a robust solution to the junction reproducibility problem has been a long-standing goal in the field. Here, we demonstrate a transformational technique for controllably tuning the electrical properties of aluminum-oxide tunnel junctions. This is accomplished using a low-voltage, alternating-bias applied individually to the tunnel junctions, with which resistance tuning by more than 70% can be achieved. The data indicates an improvement of coherence and reduction of two-level system defects. Transmission electron microscopy shows that the treated junctions are predominantly amorphous, albeit with a more uniform distribution of alumina coordination across the barrier. This technique is expected to be useful for other devices based on ionic amorphous materials. Amorphous aluminum oxide tunnel junctions are important for cryogenic and room temperature devices. Here, the authors demonstrate the use of alternating-bias-assisted annealing for transforming and tuning transmon qubit junctions, where giant increases in excess of 70% in the room temperature resistance can be achieved.

DOI
10.1038/s43246-024-00596-z

Related papers

Alternating Bias Assisted Annealing Influences Amorphous Alumina Structure in Superconducting Quantum Resonators

Nicholas Hagopian, Vito Iaia, Emily Joseph +7 more

Superconducting qubits (SQ) are favorable technology for quantum computing due to their macroscopic nature, coherence times, and gate speeds [1]. Materials synthesis and processing methods for SQs are common to fabrication in the semiconductor industry, promising easy scalability. Josephson junctions (JJ) are critical components of SQs and consist of a thin dielectric layered between two superconducting electrodes [2]. The prototypical JJ is an Al/AlOx/Al sandwich structure, as aluminum forms a thin, self-limiting oxide [2, 3]. Amorphous alumina (a-AlOx) has also seen widespread adoption as a dielectric in semiconducting devices due to favorable properties such as high breakdown fields and low leakage currents [4]. Aluminum oxidation follows Cabrera-Mott (CM) mechanisms, where adatom-induced fields drive Al-ion diffusion towards the surface [3]. Pappas et al. introduced alternating bias assisted annealing (ABAA), an electrical processing technique to tune JJ resistance [5]. ABAA applies alternating voltage pulses, below the JJ breakdown field but above the CM field, hypothesized to facilitate ionic diffusion and anneal the oxide. Via scanning transmission electron microscopy (STEM), they demonstrated that ABAA induces a measurable change on the Al electron energy loss near-edge structure (EELS-ELNES), suggestive of potential changes in bonding and homogenization of the oxide [5]. Junction resistance with ABAA can be tuned to a narrow distribution, improving device performance [6]. Iaia et al. studied the influence of ABAA in thicker a-AlOx layers in superconducting resonators designed to study two level system defects (TLS) in the amorphous dielectric [7]. They note pronounced impact of ABAA applied and measured at mK temperatures (cryogenic alternating bias stimulation, CABS) on TLS behavior, which are reversible when the device is annealed to 10 K. In this work, we investigate the influence of ABAA on a-AlOx film structure using 4D STEM fluctuation electron microscopy (FEM). Synthesis and processing of the device is described in Iaia et al. [7]. Briefly, a ∼50 nm thick a-AlOx layer was synthesized via thermal atomic layer deposition (ALD), which differs from conventional a-AlOx growth in JJs. ABAA processing was applied with ±100 MV/m fields at 353 K over 30 hours. STEM sample thickness was controlled between 0.4 – 0.7 λEMFPAlOx⁠. 4D STEM experiments were performed at 300 kV on the Lawrence Berkeley National Laboratory TEAM I, collected with a Dectris Arina detector, with a 1.2 mrad and 2 pA probe to minimize beam damage [8]. Thickness was calculated for each real space position based on the transmitted intensity of the diffraction zero-beam using a vacuum dataset for reference. The variance was normalized for thickness at each pixel and averaged across each row of diffraction patterns. Several datasets were collected, aligned, normalized, and averaged to improve statistics. Variance profiles are compared as a function of depth to understand a-AlOx medium range order across the device thickness. Figure 1 shows FEM analysis of a resonator. Fluctuation electron microscopy (FEM) variance was calculated using the Vr method for each pixel [9]. Variance is a metric which tracks how speckle intensity as a function of k fluctuates across a dataset [10]. Speckles originate from individual ordered atomic clusters in the amorphous material aligned on Bragg conditions [10]. A low variance is suggestive of a lower speckle-contrast amorphous halo with little fluctuation across the dataset, or a more uniform and amorphous structure. In contrast, a higher variance suggests stronger speckle contrast intensity fluctuations, with sources arising from both discrete speckles and changes across the dataset, or a more heterogeneous and ordered amorphous material. Figure 1 compares FEM normalized variance profiles between the as-made (AM) and ABAA devices, and Figure 2 isolates the peak variance values at ∼3 and ∼7 nm-1 as a function of distance from the TiN electrode. In the AM device, a pronounced decrease in the variance is observed near the TiN interface, suggesting a substantial reduction in amorphous structural order. This variance reduction extends several nm into the film. We speculate this may be attributable to TiN interfacial effects during the initial stages of the ALD growth. Datasets collected with different cross-sections, probe currents, shorter dwell times, and different scan geometries all show comparable TiN interfacial features, so we believe this effect is not attributable to electron or ion beam damage [8]. The ABAA-treated device shows only a modest variance reduction near the TiN interface. This suggests that ABAA increases the a-AlOx ordering near the interface. While the a-AlOx structure as a function of depth is more homogeneous after ABAA, the a-AlOx structure near the TiN interface can be thought of as more heterogeneous, peppered with well-ordered atomic clusters. We interpret this change as ABAA-induced ionic diffusion allowing the oxide to find more stable configurations [4,5]. ABAA thus offers a straightforward means to modify both the structure and properties of ALD AlOx layers inside devices [11]. Overview of spatially-resolved FEM measurements. A 4D STEM dataset is depicted by a virtual brightfield (vBF) image (top left). Each diffraction pattern’s variance is calculated, normalized based on the pixel thickness, and averaged across each row. Variances are compared as a function of depth in the AlOx layer. A representative diffraction pattern is shown (top right), with rings corresponding to maxima in the variance. Spatially resolved, normalized variance plots are shown for the as-made (bottom left) and ABAA (bottom right) devices with colors corresponding to locations depicted by the vBF colorbar. FEM comparisons between AM and ABAA devices. The AM device shows reduced variance near the TiN interface, mostly mitigated via ABAA processing.

Microscopy and Microanalysis•Jul 1, 2026•0 citations

Simulating alternating bias assisted annealing of amorphous oxide tunnel junctions

Alexander Conkey Tyner, Alexander V. Balatsky

Amorphous oxide tunneling barriers, primarily formed from aluminum, represent one of the most widely adopted platforms for superconducting quantum bits (qubits). To overcome challenges associated with defects and sample variance among the tunneling barriers, the methodology of alternating bias assisted annealing (ABAA) was introduced in Pappas et. al[1]. The process of applying alternating bias to the barrier and subsequently aging before use was shown to reduce defects in the barrier. Namely, defects that give rise to two-level systems, coupling to the qubit and expediting decoherence. In this work we replicate an expedited ABAA process through a combination of ab-initio molecular dynamics and machine-learned potentials, illuminating how ABAA effects the energy landscape of the barrier.

arXiv:2512.18420•Dec 20, 2025•2 citations

Aluminum Josephson junction microstructure and electrical properties modified by thermal annealing

Nikita D. Korshakov, Dmitry O. Moskalev, Anastasia A. Soloveva +7 more

Reproducibility of Al/AlO x /Al Josephson junctions is a challenge for scaling up superconducting quantum processors. The frequency uncertainty of the transmon qubits arising from the fabrication process is attributed to deviations in the Josephson junction microstructure and electrical properties. Here, we present a solution for this problem using the post-fabrication Josephson junction thermal annealing process. The developed thermal post-exposure method allows not only to increase the junction resistance by 175%, but also to decrease by 60% with a step of 10% in R n , which opens up new possibilities for tuning the frequency of qubits. The resistance is shown to be strongly temperature dependent, and is weakly dependent on the holding time. The linear dimensions of the electrodes and the sidewalls contribution to the total JJ area also have a significant impact on the final resistance after annealing. Finally, a theoretical model of the structure modification in a tunnel barrier with changes in oxygen concentration gradient is proposed. The proposed thermal annealing approach can be used to form stable and reproducible tunnel barriers and scalable frequency trimming for widely used fixed-frequency transmon qubits.

arXiv:2403.02179•Scientific Reports•Oct 30, 2024•14 citations

Precision Frequency Tuning of Tunable Transmon Qubits Using Alternating-Bias Assisted Annealing

Xiqiao Wang, Joel Howard, Eyob Alebachew Sete +13 more

Superconducting quantum processors are one of the leading platforms for realizing scalable fault-tolerant quantum computation (FTQC). The recent demonstration of post-fabrication tuning of Josephson junctions using alternating-bias assisted annealing (ABAA) technique and a reduction in junction loss after ABAA illuminates a promising path towards precision tuning of qubit frequency while maintaining high coherence. Here, we demonstrate precision tuning of the maximum$\vert 0\rangle\rightarrow\vert 1\rangle$transition frequency$(f_{01}^{\max})$of tunable transmon qubits by performing ABAA at room temperature using commercially available test equipment. We characterize the impact of junction relaxation and aging on resistance spread after tuning, and demonstrate a frequency equivalent tuning precision of 7.7 MHz (0.17%) based on targeted resistance tuning on hundreds of qubits, with a resistance tuning range up to 18.5%. Cryogenic measurements on tuned and untuned qubits show evidence of improved coherence after ABAA with no significant impact on tunability. Despite a small global offset, we show an empirical$f_{01}^{\max}$tuning precision of 18.4 MHz by tuning a set of multi-qubit processors targeting their designed Hamiltonians. We experimentally characterize high-fidelity parametric resonance iSWAP gates on two ABAA-tuned 9-qubit processors with fidelity as high as 99.51$\pm 0.20{\%}$. On the best-performing device, we measured across the device a median fidelity of 99.22% and an average fidelity of 99.13$\pm$0.12%. Yield modeling analysis predicts high detuning-edge-yield using ABAA beyond the 1000-qubit scale. These results demonstrate the cutting-edge capability of frequency targeting using ABAA and open up a new avenue to systematically improving Hamiltonian targeting and optimization for scaling high-performance superconducting quantum processors.

arXiv:2407.06425•IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 15, 2024•9 citations

Multi-stage suppression of Josephson junction variability with wafer-scale uniformity in 20-qubit superconducting circuits

Hyeokshin Kwon, Dae-Yun Kim, Dae Seok Han +6 more

Variability in Josephson junction area and resistance remains a central challenge in scaling fixed-frequency superconducting qubit architectures, where resistance fluctuations translate into qubit-frequency dispersion and potential frequency collisions. Here, we present a fabrication strategy that combines large-area process control on 200 mm wafers with chip-level electrical fine-tuning to improve junction-resistance repeatability. Within a central 80 × 80 mm 2 field on 200 mm wafers, the Manhattan-style aluminum junction process yielded relative standard deviations of 5.1–5.2% in junction area (RSD A ) and 5.8–7.2% in room-temperature resistance (RSD R ). Alternating-bias assisted annealing (ABAA) further reduced chip-level RSD R to 1.3% in a chip with all 20 junctions tuned and to 1.7% for 16 tuned junctions in a cryogenically characterized 20-qubit chip. In a cross-chip comparison, the coherence distributions of the ABAA-treated chip and the untreated reference chip overlapped. These results show that large-area feed-forward correction and post-fabrication tuning can improve junction-parameter repeatability in fixed-frequency superconducting circuits.

Scientific Reports•Sep 15, 2026•0 citations

Josephson energy of superconducting junctions: amorphous versus crystalline tunnel barriers

Wanting Zhang, Aldilene Saraiva-Souza, Félix Beaudoin +3 more

The Josephson energy $E_J$ is a key parameter governing the properties of transmon superconducting qubits. In Al/AlO$_x$/Al junctions, $E_J$ is set by electron tunneling through an ultrathin oxide barrier and therefore depends exponentially on the atomic structure of the barrier. We compute $E_J$ by first-principles device modeling based on the NEGF-DFT quantum-transport method, comparing a junction with a crystalline Al$_2$O$_3$ barrier against ten junctions with melt--quenched amorphous Al$_2$O$_3$ barriers of the same thickness. From the Fermi-level transmission and the Ambegaokar--Baratoff relation, we obtain a mean $E_J/h$ of $2.78$ GHz for the amorphous ensemble, with a standard deviation of $4.67$ GHz, compared with $0.73$ GHz for the crystalline reference; individual amorphous values span nearly two orders of magnitude. Scattering-state analysis shows that transport is quantum tunneling and that the variability originates from stoichiometric inhomogeneity of the amorphous oxide: Al-rich, low-barrier regions can connect into percolation-like tunneling pathways that strongly enhance the conductance. A realistic $200\times200$ nm$^2$ junction self-averages over more than $2\times10^4$ such microscopic regions. These results establish a quantitative atomistic route from oxide microstructure to the superconducting-circuit energy scale $E_J$.

quant-pharXiv:2609.09426•Sep 10, 2026•1 citation
Superconducting quantum bits (qubits) rely on ultra-thin, amorphous oxide tunneling barriers that can have significant inhomogeneities and defects as grown. This can result in relatively large uncertainties and deleterious effects in the circuits, limiting the scalability. Finding a robust solution to the junction reproducibility problem has been a long-standing goal in the field. Here, we demonstrate a transformational technique for controllably tuning the electrical properties of aluminum-oxide tunnel junctions. This is accomplished using a low-voltage, alternating-bias applied individually to the tunnel junctions, with which resistance tuning by more than 70% can be achieved. The data indicates an improvement of coherence and reduction of two-level system defects. Transmission electron microscopy shows that the treated junctions are predominantly amorphous, albeit with a more uniform distribution of alumina coordination across the barrier. This technique is expected to be useful for other devices based on ionic amorphous materials. Amorphous aluminum oxide tunnel junctions are important for cryogenic and room temperature devices. Here, the authors demonstrate the use of alternating-bias-assisted annealing for transforming and tuning transmon qubit junctions, where giant increases in excess of 70% in the room temperature resistance can be achieved.
Superconducting qubits (SQ) are favorable technology for quantum computing due to their macroscopic nature, coherence times, and gate speeds [1]. Materials synthesis and processing methods for SQs are common to fabrication in the semiconductor industry, promising easy scalability. Josephson junctions (JJ) are critical components of SQs and consist of a thin dielectric layered between two superconducting electrodes [2]. The prototypical JJ is an Al/AlOx/Al sandwich structure, as aluminum forms a thin, self-limiting oxide [2, 3]. Amorphous alumina (a-AlOx) has also seen widespread adoption as a dielectric in semiconducting devices due to favorable properties such as high breakdown fields and low leakage currents [4]. Aluminum oxidation follows Cabrera-Mott (CM) mechanisms, where adatom-induced fields drive Al-ion diffusion towards the surface [3]. Pappas et al. introduced alternating bias assisted annealing (ABAA), an electrical processing technique to tune JJ resistance [5]. ABAA applies alternating voltage pulses, below the JJ breakdown field but above the CM field, hypothesized to facilitate ionic diffusion and anneal the oxide. Via scanning transmission electron microscopy (STEM), they demonstrated that ABAA induces a measurable change on the Al electron energy loss near-edge structure (EELS-ELNES), suggestive of potential changes in bonding and homogenization of the oxide [5]. Junction resistance with ABAA can be tuned to a narrow distribution, improving device performance [6]. Iaia et al. studied the influence of ABAA in thicker a-AlOx layers in superconducting resonators designed to study two level system defects (TLS) in the amorphous dielectric [7]. They note pronounced impact of ABAA applied and measured at mK temperatures (cryogenic alternating bias stimulation, CABS) on TLS behavior, which are reversible when the device is annealed to 10 K. In this work, we investigate the influence of ABAA on a-AlOx film structure using 4D STEM fluctuation electron microscopy (FEM). Synthesis and processing of the device is described in Iaia et al. [7]. Briefly, a ∼50 nm thick a-AlOx layer was synthesized via thermal atomic layer deposition (ALD), which differs from conventional a-AlOx growth in JJs. ABAA processing was applied with ±100 MV/m fields at 353 K over 30 hours. STEM sample thickness was controlled between 0.4 – 0.7 λEMFPAlOx⁠. 4D STEM experiments were performed at 300 kV on the Lawrence Berkeley National Laboratory TEAM I, collected with a Dectris Arina detector, with a 1.2 mrad and 2 pA probe to minimize beam damage [8]. Thickness was calculated for each real space position based on the transmitted intensity of the diffraction zero-beam using a vacuum dataset for reference. The variance was normalized for thickness at each pixel and averaged across each row of diffraction patterns. Several datasets were collected, aligned, normalized, and averaged to improve statistics. Variance profiles are compared as a function of depth to understand a-AlOx medium range order across the device thickness. Figure 1 shows FEM analysis of a resonator. Fluctuation electron microscopy (FEM) variance was calculated using the Vr method for each pixel [9]. Variance is a metric which tracks how speckle intensity as a function of k fluctuates across a dataset [10]. Speckles originate from individual ordered atomic clusters in the amorphous material aligned on Bragg conditions [10]. A low variance is suggestive of a lower speckle-contrast amorphous halo with little fluctuation across the dataset, or a more uniform and amorphous structure. In contrast, a higher variance suggests stronger speckle contrast intensity fluctuations, with sources arising from both discrete speckles and changes across the dataset, or a more heterogeneous and ordered amorphous material. Figure 1 compares FEM normalized variance profiles between the as-made (AM) and ABAA devices, and Figure 2 isolates the peak variance values at ∼3 and ∼7 nm-1 as a function of distance from the TiN electrode. In the AM device, a pronounced decrease in the variance is observed near the TiN interface, suggesting a substantial reduction in amorphous structural order. This variance reduction extends several nm into the film. We speculate this may be attributable to TiN interfacial effects during the initial stages of the ALD growth. Datasets collected with different cross-sections, probe currents, shorter dwell times, and different scan geometries all show comparable TiN interfacial features, so we believe this effect is not attributable to electron or ion beam damage [8]. The ABAA-treated device shows only a modest variance reduction near the TiN interface. This suggests that ABAA increases the a-AlOx ordering near the interface. While the a-AlOx structure as a function of depth is more homogeneous after ABAA, the a-AlOx structure near the TiN interface can be thought of as more heterogeneous, peppered with well-ordered atomic clusters. We interpret this change as ABAA-induced ionic diffusion allowing the oxide to find more stable configurations [4,5]. ABAA thus offers a straightforward means to modify both the structure and properties of ALD AlOx layers inside devices [11]. Overview of spatially-resolved FEM measurements. A 4D STEM dataset is depicted by a virtual brightfield (vBF) image (top left). Each diffraction pattern’s variance is calculated, normalized based on the pixel thickness, and averaged across each row. Variances are compared as a function of depth in the AlOx layer. A representative diffraction pattern is shown (top right), with rings corresponding to maxima in the variance. Spatially resolved, normalized variance plots are shown for the as-made (bottom left) and ABAA (bottom right) devices with colors corresponding to locations depicted by the vBF colorbar. FEM comparisons between AM and ABAA devices. The AM device shows reduced variance near the TiN interface, mostly mitigated via ABAA processing.
Amorphous oxide tunneling barriers, primarily formed from aluminum, represent one of the most widely adopted platforms for superconducting quantum bits (qubits). To overcome challenges associated with defects and sample variance among the tunneling barriers, the methodology of alternating bias assisted annealing (ABAA) was introduced in Pappas et. al[1]. The process of applying alternating bias to the barrier and subsequently aging before use was shown to reduce defects in the barrier. Namely, defects that give rise to two-level systems, coupling to the qubit and expediting decoherence. In this work we replicate an expedited ABAA process through a combination of ab-initio molecular dynamics and machine-learned potentials, illuminating how ABAA effects the energy landscape of the barrier.
Reproducibility of Al/AlO x /Al Josephson junctions is a challenge for scaling up superconducting quantum processors. The frequency uncertainty of the transmon qubits arising from the fabrication process is attributed to deviations in the Josephson junction microstructure and electrical properties. Here, we present a solution for this problem using the post-fabrication Josephson junction thermal annealing process. The developed thermal post-exposure method allows not only to increase the junction resistance by 175%, but also to decrease by 60% with a step of 10% in R n , which opens up new possibilities for tuning the frequency of qubits. The resistance is shown to be strongly temperature dependent, and is weakly dependent on the holding time. The linear dimensions of the electrodes and the sidewalls contribution to the total JJ area also have a significant impact on the final resistance after annealing. Finally, a theoretical model of the structure modification in a tunnel barrier with changes in oxygen concentration gradient is proposed. The proposed thermal annealing approach can be used to form stable and reproducible tunnel barriers and scalable frequency trimming for widely used fixed-frequency transmon qubits.
Superconducting quantum processors are one of the leading platforms for realizing scalable fault-tolerant quantum computation (FTQC). The recent demonstration of post-fabrication tuning of Josephson junctions using alternating-bias assisted annealing (ABAA) technique and a reduction in junction loss after ABAA illuminates a promising path towards precision tuning of qubit frequency while maintaining high coherence. Here, we demonstrate precision tuning of the maximum∣0⟩→∣1⟩\vert 0\rangle\rightarrow\vert 1\rangle∣0⟩→∣1⟩transition frequency(f01max⁡)(f_{01}^{\max})(f01max​)of tunable transmon qubits by performing ABAA at room temperature using commercially available test equipment. We characterize the impact of junction relaxation and aging on resistance spread after tuning, and demonstrate a frequency equivalent tuning precision of 7.7 MHz (0.17%) based on targeted resistance tuning on hundreds of qubits, with a resistance tuning range up to 18.5%. Cryogenic measurements on tuned and untuned qubits show evidence of improved coherence after ABAA with no significant impact on tunability. Despite a small global offset, we show an empiricalf01max⁡f_{01}^{\max}f01max​tuning precision of 18.4 MHz by tuning a set of multi-qubit processors targeting their designed Hamiltonians. We experimentally characterize high-fidelity parametric resonance iSWAP gates on two ABAA-tuned 9-qubit processors with fidelity as high as 99.51±0.20%\pm 0.20{\%}±0.20%. On the best-performing device, we measured across the device a median fidelity of 99.22% and an average fidelity of 99.13$\pm$0.12%. Yield modeling analysis predicts high detuning-edge-yield using ABAA beyond the 1000-qubit scale. These results demonstrate the cutting-edge capability of frequency targeting using ABAA and open up a new avenue to systematically improving Hamiltonian targeting and optimization for scaling high-performance superconducting quantum processors.
Variability in Josephson junction area and resistance remains a central challenge in scaling fixed-frequency superconducting qubit architectures, where resistance fluctuations translate into qubit-frequency dispersion and potential frequency collisions. Here, we present a fabrication strategy that combines large-area process control on 200 mm wafers with chip-level electrical fine-tuning to improve junction-resistance repeatability. Within a central 80 × 80 mm 2 field on 200 mm wafers, the Manhattan-style aluminum junction process yielded relative standard deviations of 5.1–5.2% in junction area (RSD A ) and 5.8–7.2% in room-temperature resistance (RSD R ). Alternating-bias assisted annealing (ABAA) further reduced chip-level RSD R to 1.3% in a chip with all 20 junctions tuned and to 1.7% for 16 tuned junctions in a cryogenically characterized 20-qubit chip. In a cross-chip comparison, the coherence distributions of the ABAA-treated chip and the untreated reference chip overlapped. These results show that large-area feed-forward correction and post-fabrication tuning can improve junction-parameter repeatability in fixed-frequency superconducting circuits.
The Josephson energy EJE_JEJ​ is a key parameter governing the properties of transmon superconducting qubits. In Al/AlOx_xx​/Al junctions, EJE_JEJ​ is set by electron tunneling through an ultrathin oxide barrier and therefore depends exponentially on the atomic structure of the barrier. We compute EJE_JEJ​ by first-principles device modeling based on the NEGF-DFT quantum-transport method, comparing a junction with a crystalline Al2_22​O3_33​ barrier against ten junctions with melt--quenched amorphous Al2_22​O3_33​ barriers of the same thickness. From the Fermi-level transmission and the Ambegaokar--Baratoff relation, we obtain a mean EJ/hE_J/hEJ​/h of 2.782.782.78 GHz for the amorphous ensemble, with a standard deviation of 4.674.674.67 GHz, compared with 0.730.730.73 GHz for the crystalline reference; individual amorphous values span nearly two orders of magnitude. Scattering-state analysis shows that transport is quantum tunneling and that the variability originates from stoichiometric inhomogeneity of the amorphous oxide: Al-rich, low-barrier regions can connect into percolation-like tunneling pathways that strongly enhance the conductance. A realistic 200×200200\times200200×200 nm2^22 junction self-averages over more than 2×1042\times10^42×104 such microscopic regions. These results establish a quantitative atomistic route from oxide microstructure to the superconducting-circuit energy scale EJE_JEJ​.