Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2401.12545 · National Science Review

Ultra-broadband near-field Josephson microwave microscopy

Ping Zhang, Yang-Yang Lyu, Jingjing Lv, Zihan Wei, Shixian Chen, Chenguang Wang, Hongmei Du, Dingding Li, Zixi Wang, Shoucheng Hou, Runfeng Su, Hancong Sun, Yuan Du, Li Du, Liming Gao, Yong-Lei Wang, Huabing Wang, Peiheng Wu

Published Sep 3, 2024• 8 citations
arXivHTMLPDF

Abstract

Advanced microwave technologies constitute the foundation of a wide range of modern sciences, including microwave integrated circuits, quantum computing, microwave photonics, spintronics, etc. To facilitate the design of chip-based microwave devices, there is an increasing demand for state-of-the-art microscopic techniques that are capable of characterizing near-field microwave distribution and performance. In this work, we integrate Josephson junctions onto a nanosized quartz tip, forming a highly sensitive microwave mixer on-tip. This allows us to conduct spectroscopic imaging of near-field microwave distributions with high spatial resolution. By leveraging its microwave-sensitive characteristics, our Josephson microscopy achieves a broad detecting bandwidth of ≤200 GHz, as well as remarkable frequency and intensity resolutions. Near-field characterizations of microwave circuits are also conducted to demonstrate the capabilities of Josephson microscopy. Our work emphasizes the benefits of utilizing Josephson microscopy as a real-time, non-destructive technique to advance integrated microwave devices.

DOI
10.1093/nsr/nwae308

Related papers

A near-field scanning microwave microscope based on a superconducting resonator for low power measurements

Sebastian E. de Graaf, Andrey V. Danilov, A. A. Adamyan +1 more

We report on the design and performance of a cryogenic (300 mK) near-field scanning microwave microscope. It uses a microwave resonator as the near-field sensor, operating at a frequency of 6 GHz and microwave probing amplitudes down to 100 μV, approaching low enough photon population (N ∼ 1000) of the resonator such that coherent quantum manipulation becomes feasible. The resonator is made out of a miniaturized distributed fractal superconducting circuit that is integrated with the probing tip, micromachined to be compact enough such that it can be mounted directly on a quartz tuning-fork, and used for parallel operation as an atomic force microscope (AFM). The resonator is magnetically coupled to a transmission line for readout, and to achieve enhanced sensitivity we employ a Pound-Drever-Hall measurement scheme to lock to the resonance frequency. We achieve a well localized near-field around the tip such that the microwave resolution is comparable to the AFM resolution, and a capacitive sensitivity down to 6.4 × 10(-20) F/Hz, limited by mechanical noise. We believe that the results presented here are a significant step towards probing quantum systems at the nanoscale using near-field scanning microwave microscopy.

arXiv:1404.0534•Review of Scientific Instruments•Feb 1, 2013•33 citations

Implementing Josephson Junction spectroscopy in a scanning tunneling microscope

Margaret Fortman, Harrison, David C., Ramiro H. Rodriguez +6 more

Josephson junction spectroscopy is a powerful local microwave spectroscopy technique that has promising potential as a diagnostic tool to probe the microscopic origins of noise in superconducting qubits. We present advancements toward realizing Josephson junction spectroscopy in a scanning geometry, where the Josephson junction is formed between a superconducting sample and a high capacitance superconducting STM tip. Data from planar Nb-based Josephson junction devices first demonstrate the benefits of including a high capacitance shunt across the junction, which decreases linewidth and improves performance at elevated temperatures. We show how an equivalent circuit can be implemented by utilizing a planarized STM tip with local prominences, which are fabricated via electron beam lithography and reactive ion etching, followed by coating with a superconducting layer. Differential conductance measurements on a superconducting NbN surface demonstrate the ability of these high capacitance tips to decrease both thermal noise and P(E)-broadening in comparison to typical wire tips.

arXiv:2410.03009•Oct 3, 2024•0 citations

Coherent interaction with two-level fluctuators using near field scanning microwave microscopy

Sebastian E. de Graaf, Andrey V. Danilov, Sergey Kubatkin

Near field Scanning Microwave Microscopy (NSMM) is a scanning probe technique that non-invasively can obtain material properties on the nano-scale at microwave frequencies. While focus has been on developing room-temperature systems it was recently shown that this technique can potentially reach the quantum regime, opening up for applications in materials science and device characterization in solid state quantum information processing. In this paper we theoretically investigate this new regime of NSMM. Specifically we show that interaction between a resonant NSMM probe and certain types of two-level systems become possible when the NSMM probe operates in the (sub-) single photon regime, and we expect a high signal-to-noise ratio if operated under the right conditions. This would allow to detect single atomic material defects with energy splittings in the GHz range with nano-scale resolution, provided that individual defects in the material under study are well enough separated. We estimate that this condition is fulfilled for materials with loss tangents below tan δ ∼ 10(-3) which holds for materials used in today's quantum circuits and devices where typically tan δ < 10(-5). We also propose several extensions to a resonant NSMM that could improve sensitivity and functionality also for microscopes operating in a high power regime.

Scientific Reports•Nov 24, 2015•11 citations

Quantum Microwave Photodetection Using Superconducting Josephson Circuits.

Brendan Osberg

Superconducting circuits have recently become a major contender for the implementation of quantum computers owing to their compatibility with existing microchip fabrication technologies. Their utility stems largely from their ability to be coupled with resonant cavities for the purposes of trapping and relaying microwave radiation. Because of this feature, scientists are able to transmit quantum information from a variety of qubits. Though quantum-limited amplifiers exist, unfortunately there currently exists no microwave photon counter capable of single shot quantum detection. Hence, we use superconducting circuits with Josephson junctions to design a microwave photon detector based on a modified phase qubit that exhibits a bandwidth of 4GHz, and a detection fidelity of 98%. We use metastable barrier transition (driven by incident photons) to create an avalanche effect analogous to current photo-diodes. Linear coupling of the junction flux with the radiation permits photodetection from an arbitrary quantum source in the GHz range. We show the device to be robust to changes in drive frequency, temporal photon width, and resonator quality factor, and we optimize our device with respect to these parameters. We show the device to be stable over the necessary time scales, and yet sensitive enough to accurately measure photons on demand.

•Sep 3, 2009•0 citations

Local Broadband Gigahertz Spectroscopy via SQUID-on-Tip DC Readout

Senne Vervoort, Lukas Nulens, Julia Baumgarten +5 more

Superconducting microwave circuits are shaped by their local electromagnetic environment, yet standard microwave measurements do not resolve the local fields and device features that govern their behavior. Here, we combine microwave spectroscopy, nanoscale magnetic sensing, and topographic imaging in a single tapping-mode SQUID-on-tip microscope. The nonlinear Josephson response converts local GHz excitations into Shapiro steps, enabling quantitative measurements of microwave frequency signals and their excitation strength using only DC readout. Applied to a superconducting coplanar waveguide resonator, local spectroscopy reproduces the power-dependent resonance and nonlinear bifurcation observed in microwave transmission measurements. Spatially resolved measurements map the microwave response while simultaneously recording topography and static magnetic features, including vortices and Meissner screening currents. Electromagnetic simulations reveal how coupling through the superconducting probe leads limits spatial resolution and guides localized detector designs. Together, these capabilities establish a platform for correlating microwave circuit dynamics with the local structural and magnetic environment of superconducting devices.

arXiv:2610.35737•Oct 26, 2026•0 citations

Bolometric detection of Josephson radiation

Bayan Karimi, Gorm O. Steffensen, Andrew P. Higginbotham +3 more

One of the most promising approaches towards large-scale quantum computation uses devices based on many Josephson junctions. Yet, even today, open questions regarding the single junction remain unsolved, such as the detailed understanding of the quantum phase transitions, the coupling of the Josephson junction to the environment or how to improve the coherence of a superconducting qubit. Here we design and build an engineered on-chip reservoir connected to a Josephson junction that acts as an efficient bolometer for detecting the Josephson radiation under non-equilibrium, that is, biased conditions. The bolometer converts the a.c. Josephson current at microwave frequencies up to about 100 GHz into a temperature rise measured by d.c. thermometry. A circuit model based on realistic parameter values captures both the current-voltage characteristics and the measured power quantitatively. The present experiment demonstrates an efficient, wide-band, thermal detection scheme of microwave photons and provides a sensitive detector of Josephson dynamics beyond the standard conductance measurements.

arXiv:2402.09314•Nature Nanotechnology•Aug 22, 2024•13 citations
Advanced microwave technologies constitute the foundation of a wide range of modern sciences, including microwave integrated circuits, quantum computing, microwave photonics, spintronics, etc. To facilitate the design of chip-based microwave devices, there is an increasing demand for state-of-the-art microscopic techniques that are capable of characterizing near-field microwave distribution and performance. In this work, we integrate Josephson junctions onto a nanosized quartz tip, forming a highly sensitive microwave mixer on-tip. This allows us to conduct spectroscopic imaging of near-field microwave distributions with high spatial resolution. By leveraging its microwave-sensitive characteristics, our Josephson microscopy achieves a broad detecting bandwidth of ≤200 GHz, as well as remarkable frequency and intensity resolutions. Near-field characterizations of microwave circuits are also conducted to demonstrate the capabilities of Josephson microscopy. Our work emphasizes the benefits of utilizing Josephson microscopy as a real-time, non-destructive technique to advance integrated microwave devices.
We report on the design and performance of a cryogenic (300 mK) near-field scanning microwave microscope. It uses a microwave resonator as the near-field sensor, operating at a frequency of 6 GHz and microwave probing amplitudes down to 100 μV, approaching low enough photon population (N ∼ 1000) of the resonator such that coherent quantum manipulation becomes feasible. The resonator is made out of a miniaturized distributed fractal superconducting circuit that is integrated with the probing tip, micromachined to be compact enough such that it can be mounted directly on a quartz tuning-fork, and used for parallel operation as an atomic force microscope (AFM). The resonator is magnetically coupled to a transmission line for readout, and to achieve enhanced sensitivity we employ a Pound-Drever-Hall measurement scheme to lock to the resonance frequency. We achieve a well localized near-field around the tip such that the microwave resolution is comparable to the AFM resolution, and a capacitive sensitivity down to 6.4 × 10(-20) F/Hz, limited by mechanical noise. We believe that the results presented here are a significant step towards probing quantum systems at the nanoscale using near-field scanning microwave microscopy.
Josephson junction spectroscopy is a powerful local microwave spectroscopy technique that has promising potential as a diagnostic tool to probe the microscopic origins of noise in superconducting qubits. We present advancements toward realizing Josephson junction spectroscopy in a scanning geometry, where the Josephson junction is formed between a superconducting sample and a high capacitance superconducting STM tip. Data from planar Nb-based Josephson junction devices first demonstrate the benefits of including a high capacitance shunt across the junction, which decreases linewidth and improves performance at elevated temperatures. We show how an equivalent circuit can be implemented by utilizing a planarized STM tip with local prominences, which are fabricated via electron beam lithography and reactive ion etching, followed by coating with a superconducting layer. Differential conductance measurements on a superconducting NbN surface demonstrate the ability of these high capacitance tips to decrease both thermal noise and P(E)-broadening in comparison to typical wire tips.
Near field Scanning Microwave Microscopy (NSMM) is a scanning probe technique that non-invasively can obtain material properties on the nano-scale at microwave frequencies. While focus has been on developing room-temperature systems it was recently shown that this technique can potentially reach the quantum regime, opening up for applications in materials science and device characterization in solid state quantum information processing. In this paper we theoretically investigate this new regime of NSMM. Specifically we show that interaction between a resonant NSMM probe and certain types of two-level systems become possible when the NSMM probe operates in the (sub-) single photon regime, and we expect a high signal-to-noise ratio if operated under the right conditions. This would allow to detect single atomic material defects with energy splittings in the GHz range with nano-scale resolution, provided that individual defects in the material under study are well enough separated. We estimate that this condition is fulfilled for materials with loss tangents below tan δ ∼ 10(-3) which holds for materials used in today's quantum circuits and devices where typically tan δ < 10(-5). We also propose several extensions to a resonant NSMM that could improve sensitivity and functionality also for microscopes operating in a high power regime.
Superconducting circuits have recently become a major contender for the implementation of quantum computers owing to their compatibility with existing microchip fabrication technologies. Their utility stems largely from their ability to be coupled with resonant cavities for the purposes of trapping and relaying microwave radiation. Because of this feature, scientists are able to transmit quantum information from a variety of qubits. Though quantum-limited amplifiers exist, unfortunately there currently exists no microwave photon counter capable of single shot quantum detection. Hence, we use superconducting circuits with Josephson junctions to design a microwave photon detector based on a modified phase qubit that exhibits a bandwidth of 4GHz, and a detection fidelity of 98%. We use metastable barrier transition (driven by incident photons) to create an avalanche effect analogous to current photo-diodes. Linear coupling of the junction flux with the radiation permits photodetection from an arbitrary quantum source in the GHz range. We show the device to be robust to changes in drive frequency, temporal photon width, and resonator quality factor, and we optimize our device with respect to these parameters. We show the device to be stable over the necessary time scales, and yet sensitive enough to accurately measure photons on demand.
Superconducting microwave circuits are shaped by their local electromagnetic environment, yet standard microwave measurements do not resolve the local fields and device features that govern their behavior. Here, we combine microwave spectroscopy, nanoscale magnetic sensing, and topographic imaging in a single tapping-mode SQUID-on-tip microscope. The nonlinear Josephson response converts local GHz excitations into Shapiro steps, enabling quantitative measurements of microwave frequency signals and their excitation strength using only DC readout. Applied to a superconducting coplanar waveguide resonator, local spectroscopy reproduces the power-dependent resonance and nonlinear bifurcation observed in microwave transmission measurements. Spatially resolved measurements map the microwave response while simultaneously recording topography and static magnetic features, including vortices and Meissner screening currents. Electromagnetic simulations reveal how coupling through the superconducting probe leads limits spatial resolution and guides localized detector designs. Together, these capabilities establish a platform for correlating microwave circuit dynamics with the local structural and magnetic environment of superconducting devices.
One of the most promising approaches towards large-scale quantum computation uses devices based on many Josephson junctions. Yet, even today, open questions regarding the single junction remain unsolved, such as the detailed understanding of the quantum phase transitions, the coupling of the Josephson junction to the environment or how to improve the coherence of a superconducting qubit. Here we design and build an engineered on-chip reservoir connected to a Josephson junction that acts as an efficient bolometer for detecting the Josephson radiation under non-equilibrium, that is, biased conditions. The bolometer converts the a.c. Josephson current at microwave frequencies up to about 100 GHz into a temperature rise measured by d.c. thermometry. A circuit model based on realistic parameter values captures both the current-voltage characteristics and the measured power quantitatively. The present experiment demonstrates an efficient, wide-band, thermal detection scheme of microwave photons and provides a sensitive detector of Josephson dynamics beyond the standard conductance measurements.