Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.35737

Local Broadband Gigahertz Spectroscopy via SQUID-on-Tip DC Readout

Senne Vervoort, Lukas Nulens, Julia Baumgarten, Daan B Boltje, Jessalyn DeVine, Alejandro V. Silhanek, Joris Van de Vondel, Kaveh Lahabi

Published Oct 26, 2026• 0 citations
arXivHTMLPDF

Abstract

Superconducting microwave circuits are shaped by their local electromagnetic environment, yet standard microwave measurements do not resolve the local fields and device features that govern their behavior. Here, we combine microwave spectroscopy, nanoscale magnetic sensing, and topographic imaging in a single tapping-mode SQUID-on-tip microscope. The nonlinear Josephson response converts local GHz excitations into Shapiro steps, enabling quantitative measurements of microwave frequency signals and their excitation strength using only DC readout. Applied to a superconducting coplanar waveguide resonator, local spectroscopy reproduces the power-dependent resonance and nonlinear bifurcation observed in microwave transmission measurements. Spatially resolved measurements map the microwave response while simultaneously recording topography and static magnetic features, including vortices and Meissner screening currents. Electromagnetic simulations reveal how coupling through the superconducting probe leads limits spatial resolution and guides localized detector designs. Together, these capabilities establish a platform for correlating microwave circuit dynamics with the local structural and magnetic environment of superconducting devices.

DOI
10.48550/arxiv.2610.35737

Related papers

Scanning-Probe Quantum Sensing of a Microwave and Static Magnetic Field Response of an On-Chip Superconducting Resonator

Senlei Li, Jingcheng Zhou, 熊泽龙 +2 more

Superconducting resonators are finding increasing applications in designing advanced quantum circuits for an ongoing sensing, metrology, and computing technological revolution. A detailed knowledge of the microscopic electromagnetic properties of superconducting resonators is directly relevant for their further improvements on circuitry design and device performance. Here, we introduce scanning-probe quantum microscopy to report nanoscale sensing of the microwave and static magnetic field environment of an on-chip niobium (Nb) superconducting resonator. Taking advantage of Rabi oscillation measurements, we show that microwave magnetic fields generated by the superconducting resonator mode can be utilized to achieve coherent control of a quantum spin sensor. We further visualize the static electromagnetic field response of the Nb resonator, showing magnetic field-induced formation, evolution, and depinning of superconducting vortices. Our results provide insights into future design, testing, and evaluation of solid-state superconducting resonators, highlighting the potential of quantum sensors as a local probe to investigate electromagnetic properties of superconducting quantum circuits.

arXiv:2606.20904•Nano Letters•Aug 7, 2026•1 citation

Multiplexed microwave resonators by frequency comb spectroscopy

Angelo Greco, Jukka-Pekka Kaikkonen, Luca Chirolli +4 more

Coplanar waveguide resonators are central to the thriving field of circuit quantum electrodynamics. Recently, we have demonstrated the generation of a broadband microwave-frequency comb spectrum using a superconducting quantum interference device (SQUID) driven by a time-dependent magnetic field. Here, the frequency comb is used to spectroscopically probe a bank of coplanar microwave resonators, inductively coupled to a common transmission line, a standard circuit with a variety of applications. We compare the resonator line shape obtained from signals synthesized at room temperature using conventional electronics with the radiation produced in the cryogenic environment by our source, showing substantial equivalence in the estimation of the resonator quality factors. To measure non-uniformly spaced resonant frequencies, we drive the generator with a bi-chromatic tone to generate intermodulation products. Such a dense frequency comb spectrum enables simultaneous addressing of a few resonators via frequency multiplexing. Finally, we discuss the criteria for achieving effective spectroscopic coverage of a given frequency bandwidth.

quant-pharXiv:2602.08890•Feb 10, 2026•1 citation

A near-field scanning microwave microscope based on a superconducting resonator for low power measurements

Sebastian E. de Graaf, Andrey V. Danilov, A. A. Adamyan +1 more

We report on the design and performance of a cryogenic (300 mK) near-field scanning microwave microscope. It uses a microwave resonator as the near-field sensor, operating at a frequency of 6 GHz and microwave probing amplitudes down to 100 μV, approaching low enough photon population (N ∼ 1000) of the resonator such that coherent quantum manipulation becomes feasible. The resonator is made out of a miniaturized distributed fractal superconducting circuit that is integrated with the probing tip, micromachined to be compact enough such that it can be mounted directly on a quartz tuning-fork, and used for parallel operation as an atomic force microscope (AFM). The resonator is magnetically coupled to a transmission line for readout, and to achieve enhanced sensitivity we employ a Pound-Drever-Hall measurement scheme to lock to the resonance frequency. We achieve a well localized near-field around the tip such that the microwave resolution is comparable to the AFM resolution, and a capacitive sensitivity down to 6.4 × 10(-20) F/Hz, limited by mechanical noise. We believe that the results presented here are a significant step towards probing quantum systems at the nanoscale using near-field scanning microwave microscopy.

arXiv:1404.0534•Review of Scientific Instruments•Feb 1, 2013•33 citations

A micro-SQUID with dispersive readout for magnetic scanning microscopy

F. Foroughi, J.-M. Mol, T. Müller +3 more

We have designed and characterized a micro-SQUID with dispersive readout for use in low temperature scanning probe microscopy systems. The design features a capacitively shunted RF SQUID with a tunable resonance frequency from 5 to 12 GHz, micrometer spatial resolution, and integrated superconducting coils for local application of magnetic fields. The SQUID is operated as a nonlinear oscillator with a flux- and power-dependent resonance frequency. Measurements for device characterization and noise benchmarking were carried out at 4 K. The measured flux noise above 10 kHz at 4 K is 80 nΦ0 Hz−1∕2 at a bandwidth of 200 MHz. Estimations suggest that one can benefit from parametric gain based on inherent nonlinearity of the Josephson junction and reduce the flux noise to 30 nΦ0Hz–1∕2 at 100 mK, which corresponds to 10.6 μBHz–1∕2 for a magnetic moment located at the center of the pickup loop.

arXiv:1803.07636•Applied Physics Letters•Jun 18, 2018•24 citations

High-resolution microwave frequency identification via bias-tuned superconducting transmission lines

Masato Naruse, Kohta Yamaguchi, Hiroaki Myoren

We develop a microwave frequency counter based on the complex conductivity modulation of a DC-biased superconducting transmission line while maintaining the bias below the critical current. A resonator-free platform is proposed for microwave frequency estimation. It utilizes a bias-controlled phase delay in a superconducting coplanar waveguide structure, which imprints frequency-dependent signatures on the transmitted microwave tone. Instead of relying on intentionally designed resonators, our method leverages the complex transmission spectra arising from numerous weak resonance structures due to subtle fabrication imperfections. However, even in the absence of such features, the method remains effective because the DC bias induces frequency-dependent phase shifts that modulate the microwave signal’s propagation velocity. Mixed signals are externally generated via in-phase-quadrature mixing with a reference signal, which manifests as interference-like patterns enabling high-resolution spectral identification. We measure the frequency-dependent changes in the interference-like patterns under this bias to catalog characteristic transmission loss profiles across a wide frequency range (2–8 GHz). These profiles serve as supervised training data for a machine learning algorithm that identifies unknown input microwave frequencies with high-resolution and accuracy. Our method achieves a frequency resolution (F/ΔF) of over 200 000 and a relative error in identification of below 0.01%. This scalable approach to distributed microwave sensing may be useful for quantum measurement and signal classification and is particularly well-suited for dark matter searches, such as hidden-photon detection, where broadband frequency identification without prior tuning is essential. The measured frequency range is primarily limited by the bandwidth of external microwave components, such as low-noise amplifiers and bias-tees. The superconducting device itself may be used up to its superconducting gap frequency (∼280 GHz for TiN at 3.8 K).

AIP Advances•Nov 1, 2025•0 citations

Nonlinear Microwave Circuit Based on Niobium Nanobridges Fabricated With Ne FIB

Parth Bhandari, Laith Meti, Tom Godfrey +7 more

Recently the exploration of nonlinear microwave response in superconducting circuits has been extended to Nb nanobridges that can operate at higher magnetic fields, frequencies, and temperatures than their conventional Al counterparts. Nb nanobridge-based Superconducting Quantum Interference Devices (SQUIDs) have shown potential applications in quantum information processing, weak signal detection, and single spin detection. Combining such non-linear elements with circuit Quantum Electrodynamic (QED) elements like coplanar waveguide (CPW) resonators allows the study of the nonlinearity of such systems. In this work we report on the design, fabrication and dispersive microwave readout of a Nb DC nanoSQUID embedded in a superconducting quarter-wavelength resonator. The measured flux-tuneability of the resonance shows a modulation of a few MHz and fits simulations, giving a critical current of 330 μA and a screening parameterβLof 4.07. Following this we present results showing Kerr-type detuning with a pump tone applied to the device.

IEEE Transactions on Applied Superconductivity•Apr 9, 2026•0 citations
Superconducting microwave circuits are shaped by their local electromagnetic environment, yet standard microwave measurements do not resolve the local fields and device features that govern their behavior. Here, we combine microwave spectroscopy, nanoscale magnetic sensing, and topographic imaging in a single tapping-mode SQUID-on-tip microscope. The nonlinear Josephson response converts local GHz excitations into Shapiro steps, enabling quantitative measurements of microwave frequency signals and their excitation strength using only DC readout. Applied to a superconducting coplanar waveguide resonator, local spectroscopy reproduces the power-dependent resonance and nonlinear bifurcation observed in microwave transmission measurements. Spatially resolved measurements map the microwave response while simultaneously recording topography and static magnetic features, including vortices and Meissner screening currents. Electromagnetic simulations reveal how coupling through the superconducting probe leads limits spatial resolution and guides localized detector designs. Together, these capabilities establish a platform for correlating microwave circuit dynamics with the local structural and magnetic environment of superconducting devices.
Superconducting resonators are finding increasing applications in designing advanced quantum circuits for an ongoing sensing, metrology, and computing technological revolution. A detailed knowledge of the microscopic electromagnetic properties of superconducting resonators is directly relevant for their further improvements on circuitry design and device performance. Here, we introduce scanning-probe quantum microscopy to report nanoscale sensing of the microwave and static magnetic field environment of an on-chip niobium (Nb) superconducting resonator. Taking advantage of Rabi oscillation measurements, we show that microwave magnetic fields generated by the superconducting resonator mode can be utilized to achieve coherent control of a quantum spin sensor. We further visualize the static electromagnetic field response of the Nb resonator, showing magnetic field-induced formation, evolution, and depinning of superconducting vortices. Our results provide insights into future design, testing, and evaluation of solid-state superconducting resonators, highlighting the potential of quantum sensors as a local probe to investigate electromagnetic properties of superconducting quantum circuits.
Coplanar waveguide resonators are central to the thriving field of circuit quantum electrodynamics. Recently, we have demonstrated the generation of a broadband microwave-frequency comb spectrum using a superconducting quantum interference device (SQUID) driven by a time-dependent magnetic field. Here, the frequency comb is used to spectroscopically probe a bank of coplanar microwave resonators, inductively coupled to a common transmission line, a standard circuit with a variety of applications. We compare the resonator line shape obtained from signals synthesized at room temperature using conventional electronics with the radiation produced in the cryogenic environment by our source, showing substantial equivalence in the estimation of the resonator quality factors. To measure non-uniformly spaced resonant frequencies, we drive the generator with a bi-chromatic tone to generate intermodulation products. Such a dense frequency comb spectrum enables simultaneous addressing of a few resonators via frequency multiplexing. Finally, we discuss the criteria for achieving effective spectroscopic coverage of a given frequency bandwidth.
We report on the design and performance of a cryogenic (300 mK) near-field scanning microwave microscope. It uses a microwave resonator as the near-field sensor, operating at a frequency of 6 GHz and microwave probing amplitudes down to 100 μV, approaching low enough photon population (N ∼ 1000) of the resonator such that coherent quantum manipulation becomes feasible. The resonator is made out of a miniaturized distributed fractal superconducting circuit that is integrated with the probing tip, micromachined to be compact enough such that it can be mounted directly on a quartz tuning-fork, and used for parallel operation as an atomic force microscope (AFM). The resonator is magnetically coupled to a transmission line for readout, and to achieve enhanced sensitivity we employ a Pound-Drever-Hall measurement scheme to lock to the resonance frequency. We achieve a well localized near-field around the tip such that the microwave resolution is comparable to the AFM resolution, and a capacitive sensitivity down to 6.4 × 10(-20) F/Hz, limited by mechanical noise. We believe that the results presented here are a significant step towards probing quantum systems at the nanoscale using near-field scanning microwave microscopy.
We have designed and characterized a micro-SQUID with dispersive readout for use in low temperature scanning probe microscopy systems. The design features a capacitively shunted RF SQUID with a tunable resonance frequency from 5 to 12 GHz, micrometer spatial resolution, and integrated superconducting coils for local application of magnetic fields. The SQUID is operated as a nonlinear oscillator with a flux- and power-dependent resonance frequency. Measurements for device characterization and noise benchmarking were carried out at 4 K. The measured flux noise above 10 kHz at 4 K is 80 nΦ0 Hz−1∕2 at a bandwidth of 200 MHz. Estimations suggest that one can benefit from parametric gain based on inherent nonlinearity of the Josephson junction and reduce the flux noise to 30 nΦ0Hz–1∕2 at 100 mK, which corresponds to 10.6 μBHz–1∕2 for a magnetic moment located at the center of the pickup loop.
We develop a microwave frequency counter based on the complex conductivity modulation of a DC-biased superconducting transmission line while maintaining the bias below the critical current. A resonator-free platform is proposed for microwave frequency estimation. It utilizes a bias-controlled phase delay in a superconducting coplanar waveguide structure, which imprints frequency-dependent signatures on the transmitted microwave tone. Instead of relying on intentionally designed resonators, our method leverages the complex transmission spectra arising from numerous weak resonance structures due to subtle fabrication imperfections. However, even in the absence of such features, the method remains effective because the DC bias induces frequency-dependent phase shifts that modulate the microwave signal’s propagation velocity. Mixed signals are externally generated via in-phase-quadrature mixing with a reference signal, which manifests as interference-like patterns enabling high-resolution spectral identification. We measure the frequency-dependent changes in the interference-like patterns under this bias to catalog characteristic transmission loss profiles across a wide frequency range (2–8 GHz). These profiles serve as supervised training data for a machine learning algorithm that identifies unknown input microwave frequencies with high-resolution and accuracy. Our method achieves a frequency resolution (F/ΔF) of over 200 000 and a relative error in identification of below 0.01%. This scalable approach to distributed microwave sensing may be useful for quantum measurement and signal classification and is particularly well-suited for dark matter searches, such as hidden-photon detection, where broadband frequency identification without prior tuning is essential. The measured frequency range is primarily limited by the bandwidth of external microwave components, such as low-noise amplifiers and bias-tees. The superconducting device itself may be used up to its superconducting gap frequency (∼280 GHz for TiN at 3.8 K).
Recently the exploration of nonlinear microwave response in superconducting circuits has been extended to Nb nanobridges that can operate at higher magnetic fields, frequencies, and temperatures than their conventional Al counterparts. Nb nanobridge-based Superconducting Quantum Interference Devices (SQUIDs) have shown potential applications in quantum information processing, weak signal detection, and single spin detection. Combining such non-linear elements with circuit Quantum Electrodynamic (QED) elements like coplanar waveguide (CPW) resonators allows the study of the nonlinearity of such systems. In this work we report on the design, fabrication and dispersive microwave readout of a Nb DC nanoSQUID embedded in a superconducting quarter-wavelength resonator. The measured flux-tuneability of the resonance shows a modulation of a few MHz and fits simulations, giving a critical current of 330 μA and a screening parameterβLof 4.07. Following this we present results showing Kerr-type detuning with a pump tone applied to the device.