Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2212.12369 · Review of Scientific Instruments

A compact and versatile cryogenic probe station for quantum device testing

Mathieu de Kruijf, Simon Geyer, Toni Berger, Matthias Mergenthaler, Floris Braakman, Richard John Warburton, Andreas V. Kuhlmann

Published May 1, 2023• 7 citations
arXivHTMLPDF

Abstract

Fast feedback from cryogenic electrical characterization measurements is key for the development of scalable quantum computing technology. At room temperature, high-throughput device testing is accomplished with a probe-based solution, where electrical probes are repeatedly positioned onto devices for acquiring statistical data. In this work, we present a probe station that can be operated from room temperature down to below 2 K. Its small size makes it compatible with standard cryogenic measurement setups with a magnet. A large variety of electronic devices can be tested. Here, we demonstrate the performance of the prober by characterizing silicon fin field-effect transistors as a host for quantum dot spin qubits. Such a tool can massively accelerate the design-fabrication-measurement cycle and provide important feedback for process optimization toward building scalable quantum circuits.

DOI
10.1063/5.0139825

Related papers

Automatic 4 K Cryogenic Probe Station for DC and Microwave Measurements on 150-mm and 200-mm Wafers

Joshua T. West, A. Kurlej, Alex Wynn +3 more

Robust maturation of cryogenic electronics has been limited by the lack of high-throughput measurement capabilities, especially for electronics that operate at 4 K. Automated on-wafer probing to characterize the dc and RF performance of components and complete circuits has been a critical element in the development of room temperature electronics. We report here the development of a fully automated wafer prober that operates with the wafer cooled to a temperature of 4 K and has the ability to null the ambient magnetic field to below 100 nT, which is important for measuring superconducting circuits with the wafer prober.

IEEE MTT-S International Microwave Symposium digest•Jun 19, 2022•3 citations

Measurement setup for the characterization of integrated semiconductor circuits at cryogenic temperatures

Paul Julius Ritter, Marc-André Tucholke, Marius Neumann +8 more

Integrated semiconductor circuits operating at cryogenic temperatures can play a crucial role in scaling quantum computing architectures based on trapped-ion and superconducting qubits. Other technologies, such as low-temperature detectors, can also benefit significantly from these circuits. These applications demand high-frequency, cryogenic temperature measurement systems for the thorough characterization of semiconductor components and circuits. This work presents a customizable, high-frequency, fast, and reliable cryogenic measurement setup for measurement temperatures ranging from room temperature to 4.2 K. It features up to two dc probes or two ground-signal-ground probes for frequencies of up to 67 GHz, which can be configured in a 180° or 90° configuration. In addition, up to 48 BeCu wires configured as twisted pairs provide supply and control signals. Furthermore, up to four rf connections can be mounted directly to a printed circuit board. The setup features an optical microscope in the vacuum chamber to position the probes, which is further utilized by a machine vision algorithm, allowing the detection of pads and automatic positioning of the probes over the pads. The hardware is located in a 550 × 500 × 500 mm3 large vacuum chamber with two independent pulse tube cryocoolers with cooling powers of up to 0.9 and 0.4 W at 4.2 K. Exemplary room temperature and cryogenic S-parameter, transient frequency (fT), time-domain, capacitance-voltage, and dc measurements of single transistors and integrated circuits fabricated by Infineon are presented, demonstrating the system's measurement capability for quantum computing and other applications.

Review of Scientific Instruments•Apr 1, 2025•9 citations

Cryogenic electronics for the read-out of quantum processors

Harald Homulle

Quantum computing promises an exponential speed-up of computation compared to what is nowadays achievable with classical computers. In this way, it enables the evaluation of more complex models and the breaching of current security algorithms. For the operation of a quantum system, many questions remain to be answered. Currently, there are several quantum technologies that promise to be both reliable and scalable, two features required for large scale quantum operations. Common to all technologies is the operating temperature that needs to be close to absolute zero, i.e. below 100 mK, to suppress environment noise and allow the quantum properties to become 'visible'. In order for any quantum processor to be operated, a so-called quantum-classical interface is required for the quantum bit (qubit) read-out and control. This interface consists of various electronic blocks, such as analog-to-digital converters, digital-to-analog converters, mixers, amplifiers and a digital controller. Especially the analog blocks require effort to meet the noise and stability constraints as not to disturb the very sensitive qubits and allow reading of the tiny signals. As the qubits live in extremely deep-cryogenic temperatures, long wires interface the cryogenic with the room temperature environment, where most of the electronics is situated. However, for a scalable system, heat injection becomes a serious problem, with many wires between 300 K and sub-Kelvin. Furthermore, such amount of interconnects is challenging to mechanically place in a dilution refrigerator. Therefore, in this work, we propose to implement the electronics not at room temperature, but at a temperature much closer to the qubits, for example at 4 K. This not only reduces significantly the wiring between room temperature and the qubits, but we can also benefit from lower electronic noise at such a temperature. The operation of conventional electronics almost 200°C below its normal temperature range is not trivial as device properties alter significantly and most circuits no longer operate as intended. In CMOS processes, the main technology in the integrated electronics world, the behaviour of the transistors, required for the implementation of any circuit, deviates considerably at low temperatures. The transistor's threshold voltage goes up, the mobility increases and the subthreshold slope becomes steeper, to name just a few of these deviations. Although there are improvements in performance, there are also some counter effects, and characterization of the transistors is needed to observe the changes. Once devices are characterized at such low temperatures, new models can be built and circuits can be simulated and adapted to operate properly at cryogenic temperatures. Luckily, there are various commercially available devices that can already withstand the chills of cold. We demonstrated various commercially available devices, such as a field-programmable gate array (FPGA) implemented in a 28 nm CMOS process, to be operating without major concerns at 4~K. Its properties alter only slightly, within 5 to 10%, and all tested circuit implementations, working at 300~K, also worked at 4 K. We combined both commercially available devices, that operate 200 K below their specified temperature range, with custom designed CMOS circuits to implement a cryogenic read-out platform for spin qubits. This system comprises amplifiers, an ADC, an FPGA, voltage regulators and a clock generator. It allows to amplify the tiny signal from the qubits and digitize it directly in the FPGA in order to process the data locally at 4~K. This system is one of the first systematic attempts at operating a part of the quantum-classical interface at cryogenic temperatures and forms the basis for future systems comprising the complete electronic interface for qubits to operate at such low temperatures. One of the main problems to tackle for cryogenic electronic systems is their power consumption. Power budgets are simply limited to roughly 1 or 2 Watts at 4 K and exponentially lower at deeper cryogenic temperatures, thus limiting the size of large-scale electronic systems. Our approach of combined commercial and custom circuits will have to be steadily replaced by a single (custom) technology that meets both power and scalability constraints. One of the best candidates is CMOS, a technology that the industry has relied upon for several decades and benefits from many optimizations thanks to Moore's law.

•Apr 9, 2019•24 citations

Cryogenic HEMT-based devices and circuits for quantum computing

Ferraris, Alberto

In recent years, quantum computers have emerged as a disruptive technology capable of solving problems currently intractable for classical systems. Computation is performed using qubits, which exploit quantum properties like superposition and entanglement, and requires them to operate at cryogenic temperatures. As a result, quantum computers are built around cryostats that reach temperatures as low as \qty{10}{\milli\kelvin}. However, to deliver a significant advantage over conventional approaches, quantum computers must increase their qubit count, improve qubit quality, and adopt more sophisticated control and readout architectures. The integration of more complex or improved cryogenic electronics inside the cryostat can enhance the scalability of these systems, and is the topic of this thesis. The primary technology platform used in this work is based on cryogenic InGaAs/InP high-electron-mobility transistors (HEMTs). One objective was the development of cryogenic circuits that enhance the scalability of spin-qubit quantum computers by enabling efficient signal delivery in control and readout paths. To this end, cryogenic multiplexers were demonstrated with threshold voltages as low as \qty{90}{\milli\volt}, subthreshold swing of \qty{5}{\milli\volt\per dec}, and on-off ratio of $10^7$ at \qty{4}{\kelvin}. In addition, a charge-storage array was developed for the local generation of qubit bias signals, using an operation scheme based on pulse trains to program voltage levels on capacitors that can be placed in proximity to qubit gates. A second objective was the fabrication of HEMTs with enhanced performance for use in cryogenic low-noise amplifiers, which are critical for qubit readout. Studies were performed to characterize self-heating, an effect that limits transistor performance at cryogenic temperatures. Moreover HEMTs with improved characteristics were fabricated, which achieved exceptional values in state-of-the-art metrics, including $f_T =$ \qty{622}{\giga\hertz}, $f_{MAX} =$ \qty{733}{\giga\hertz}, and a noise indication factor $\sqrt{I_{DS}} / g_m =$ \qty{0.17}{\sqrt{\volt \cdot \milli\meter / \siemens}} at \qty{4}{\kelvin}. These results represent a new record for the combination of high-frequency and low-noise performance in a cryogenic HEMT. These results establish the InGaAs/InP HEMT technology as a promising platform for the development of cryogenic circuits, and demonstrate its versatility in addressing multiple applications requiring both single-device performance and integration at the circuit level.

•Jan 1, 2025•0 citations

Practical Considerations for RF Measurements of Cryogenic CMOS Circuits for Quantum Computing

D. Frolov, Sudipto Chakraborty, Devin Underwood +18 more

Cryogenic CMOS control and readout electronics for quantum computing using superconducting qubits offers several potential advantages versus the use of room temperature electronics, including reduced wiring and lower cost per control channel. The development and practical implementation of such electronics at a mass-production scale for systems with tens of thousands of channels, however, requires circuit characterization in the target cryogenic use environment and with interfaces as close as possible to those that will be used in a real quantum machine. The cryogenic use environment and interfaces for test are usually far from the almost ideal conditions that can be achieved in a regular cryogenic probe station. In this paper, we describe a new testbed for the characterization of CMOS circuits at cryogenic temperatures that solves some of these problems.

IEEE MTT-S International Microwave Symposium digest•Jun 16, 2024•4 citations

Multiplexed quantum transport using commercial off-the-shelf CMOS at sub-kelvin temperatures

Brian Paquelet Wuetz, Peter L. Bavdaz, LaReine A. Yeoh +10 more

Continuing advancements in quantum information processing have caused a paradigm shift from research mainly focused on testing the reality of quantum mechanics to engineering qubit devices with numbers required for practical quantum computation.One of the major challenges in scaling toward large-scale solid-state systems is the limited input/output (I/O) connectors present in cryostats operating at sub-kelvin temperatures required to execute quantum logic with high-fidelity.This interconnect bottleneck is equally present in the device fabrication-measurement cycle, which requires high-throughput and cryogenic characterization to develop quantum processors.Here we multiplex quantum transport of two-dimensional electron gases at sub-kelvin temperatures.We use commercial off-the-shelf CMOS multiplexers to achieve an order of magnitude increase in the number of wires.Exploiting this technology we advance 300 mm epitaxial wafers manufactured in an industrial CMOS fab to a record electron mobility of (3.9±0.6)×10 5 cm 2 /Vs and percolation density of (6.9±0.4)×10 10 cm -2 , representing a key step toward large silicon qubit arrays.We envision that the demonstration will inspire the development of cryogenic electronics for quantum information and because of the simplicity of assembly, low-cost, yet versatility, we foresee widespread use of similar cryo-CMOS circuits for high-throughput quantum measurements and control of quantum engineered systems.

•Jan 1, 2019•0 citations
Fast feedback from cryogenic electrical characterization measurements is key for the development of scalable quantum computing technology. At room temperature, high-throughput device testing is accomplished with a probe-based solution, where electrical probes are repeatedly positioned onto devices for acquiring statistical data. In this work, we present a probe station that can be operated from room temperature down to below 2 K. Its small size makes it compatible with standard cryogenic measurement setups with a magnet. A large variety of electronic devices can be tested. Here, we demonstrate the performance of the prober by characterizing silicon fin field-effect transistors as a host for quantum dot spin qubits. Such a tool can massively accelerate the design-fabrication-measurement cycle and provide important feedback for process optimization toward building scalable quantum circuits.
Robust maturation of cryogenic electronics has been limited by the lack of high-throughput measurement capabilities, especially for electronics that operate at 4 K. Automated on-wafer probing to characterize the dc and RF performance of components and complete circuits has been a critical element in the development of room temperature electronics. We report here the development of a fully automated wafer prober that operates with the wafer cooled to a temperature of 4 K and has the ability to null the ambient magnetic field to below 100 nT, which is important for measuring superconducting circuits with the wafer prober.
Integrated semiconductor circuits operating at cryogenic temperatures can play a crucial role in scaling quantum computing architectures based on trapped-ion and superconducting qubits. Other technologies, such as low-temperature detectors, can also benefit significantly from these circuits. These applications demand high-frequency, cryogenic temperature measurement systems for the thorough characterization of semiconductor components and circuits. This work presents a customizable, high-frequency, fast, and reliable cryogenic measurement setup for measurement temperatures ranging from room temperature to 4.2 K. It features up to two dc probes or two ground-signal-ground probes for frequencies of up to 67 GHz, which can be configured in a 180° or 90° configuration. In addition, up to 48 BeCu wires configured as twisted pairs provide supply and control signals. Furthermore, up to four rf connections can be mounted directly to a printed circuit board. The setup features an optical microscope in the vacuum chamber to position the probes, which is further utilized by a machine vision algorithm, allowing the detection of pads and automatic positioning of the probes over the pads. The hardware is located in a 550 × 500 × 500 mm3 large vacuum chamber with two independent pulse tube cryocoolers with cooling powers of up to 0.9 and 0.4 W at 4.2 K. Exemplary room temperature and cryogenic S-parameter, transient frequency (fT), time-domain, capacitance-voltage, and dc measurements of single transistors and integrated circuits fabricated by Infineon are presented, demonstrating the system's measurement capability for quantum computing and other applications.
Quantum computing promises an exponential speed-up of computation compared to what is nowadays achievable with classical computers. In this way, it enables the evaluation of more complex models and the breaching of current security algorithms. For the operation of a quantum system, many questions remain to be answered. Currently, there are several quantum technologies that promise to be both reliable and scalable, two features required for large scale quantum operations. Common to all technologies is the operating temperature that needs to be close to absolute zero, i.e. below 100 mK, to suppress environment noise and allow the quantum properties to become 'visible'. In order for any quantum processor to be operated, a so-called quantum-classical interface is required for the quantum bit (qubit) read-out and control. This interface consists of various electronic blocks, such as analog-to-digital converters, digital-to-analog converters, mixers, amplifiers and a digital controller. Especially the analog blocks require effort to meet the noise and stability constraints as not to disturb the very sensitive qubits and allow reading of the tiny signals. As the qubits live in extremely deep-cryogenic temperatures, long wires interface the cryogenic with the room temperature environment, where most of the electronics is situated. However, for a scalable system, heat injection becomes a serious problem, with many wires between 300 K and sub-Kelvin. Furthermore, such amount of interconnects is challenging to mechanically place in a dilution refrigerator. Therefore, in this work, we propose to implement the electronics not at room temperature, but at a temperature much closer to the qubits, for example at 4 K. This not only reduces significantly the wiring between room temperature and the qubits, but we can also benefit from lower electronic noise at such a temperature. The operation of conventional electronics almost 200°C below its normal temperature range is not trivial as device properties alter significantly and most circuits no longer operate as intended. In CMOS processes, the main technology in the integrated electronics world, the behaviour of the transistors, required for the implementation of any circuit, deviates considerably at low temperatures. The transistor's threshold voltage goes up, the mobility increases and the subthreshold slope becomes steeper, to name just a few of these deviations. Although there are improvements in performance, there are also some counter effects, and characterization of the transistors is needed to observe the changes. Once devices are characterized at such low temperatures, new models can be built and circuits can be simulated and adapted to operate properly at cryogenic temperatures. Luckily, there are various commercially available devices that can already withstand the chills of cold. We demonstrated various commercially available devices, such as a field-programmable gate array (FPGA) implemented in a 28 nm CMOS process, to be operating without major concerns at 4~K. Its properties alter only slightly, within 5 to 10%, and all tested circuit implementations, working at 300~K, also worked at 4 K. We combined both commercially available devices, that operate 200 K below their specified temperature range, with custom designed CMOS circuits to implement a cryogenic read-out platform for spin qubits. This system comprises amplifiers, an ADC, an FPGA, voltage regulators and a clock generator. It allows to amplify the tiny signal from the qubits and digitize it directly in the FPGA in order to process the data locally at 4~K. This system is one of the first systematic attempts at operating a part of the quantum-classical interface at cryogenic temperatures and forms the basis for future systems comprising the complete electronic interface for qubits to operate at such low temperatures. One of the main problems to tackle for cryogenic electronic systems is their power consumption. Power budgets are simply limited to roughly 1 or 2 Watts at 4 K and exponentially lower at deeper cryogenic temperatures, thus limiting the size of large-scale electronic systems. Our approach of combined commercial and custom circuits will have to be steadily replaced by a single (custom) technology that meets both power and scalability constraints. One of the best candidates is CMOS, a technology that the industry has relied upon for several decades and benefits from many optimizations thanks to Moore's law.
In recent years, quantum computers have emerged as a disruptive technology capable of solving problems currently intractable for classical systems. Computation is performed using qubits, which exploit quantum properties like superposition and entanglement, and requires them to operate at cryogenic temperatures. As a result, quantum computers are built around cryostats that reach temperatures as low as \qty{10}{\milli\kelvin}. However, to deliver a significant advantage over conventional approaches, quantum computers must increase their qubit count, improve qubit quality, and adopt more sophisticated control and readout architectures. The integration of more complex or improved cryogenic electronics inside the cryostat can enhance the scalability of these systems, and is the topic of this thesis. The primary technology platform used in this work is based on cryogenic InGaAs/InP high-electron-mobility transistors (HEMTs). One objective was the development of cryogenic circuits that enhance the scalability of spin-qubit quantum computers by enabling efficient signal delivery in control and readout paths. To this end, cryogenic multiplexers were demonstrated with threshold voltages as low as \qty{90}{\milli\volt}, subthreshold swing of \qty{5}{\milli\volt\per dec}, and on-off ratio of 10710^7107 at \qty{4}{\kelvin}. In addition, a charge-storage array was developed for the local generation of qubit bias signals, using an operation scheme based on pulse trains to program voltage levels on capacitors that can be placed in proximity to qubit gates. A second objective was the fabrication of HEMTs with enhanced performance for use in cryogenic low-noise amplifiers, which are critical for qubit readout. Studies were performed to characterize self-heating, an effect that limits transistor performance at cryogenic temperatures. Moreover HEMTs with improved characteristics were fabricated, which achieved exceptional values in state-of-the-art metrics, including fT=f_T =fT​= \qty{622}{\giga\hertz}, fMAX=f_{MAX} =fMAX​= \qty{733}{\giga\hertz}, and a noise indication factor IDS/gm=\sqrt{I_{DS}} / g_m =IDS​​/gm​= \qty{0.17}{\sqrt{\volt \cdot \milli\meter / \siemens}} at \qty{4}{\kelvin}. These results represent a new record for the combination of high-frequency and low-noise performance in a cryogenic HEMT. These results establish the InGaAs/InP HEMT technology as a promising platform for the development of cryogenic circuits, and demonstrate its versatility in addressing multiple applications requiring both single-device performance and integration at the circuit level.
Cryogenic CMOS control and readout electronics for quantum computing using superconducting qubits offers several potential advantages versus the use of room temperature electronics, including reduced wiring and lower cost per control channel. The development and practical implementation of such electronics at a mass-production scale for systems with tens of thousands of channels, however, requires circuit characterization in the target cryogenic use environment and with interfaces as close as possible to those that will be used in a real quantum machine. The cryogenic use environment and interfaces for test are usually far from the almost ideal conditions that can be achieved in a regular cryogenic probe station. In this paper, we describe a new testbed for the characterization of CMOS circuits at cryogenic temperatures that solves some of these problems.
Continuing advancements in quantum information processing have caused a paradigm shift from research mainly focused on testing the reality of quantum mechanics to engineering qubit devices with numbers required for practical quantum computation.One of the major challenges in scaling toward large-scale solid-state systems is the limited input/output (I/O) connectors present in cryostats operating at sub-kelvin temperatures required to execute quantum logic with high-fidelity.This interconnect bottleneck is equally present in the device fabrication-measurement cycle, which requires high-throughput and cryogenic characterization to develop quantum processors.Here we multiplex quantum transport of two-dimensional electron gases at sub-kelvin temperatures.We use commercial off-the-shelf CMOS multiplexers to achieve an order of magnitude increase in the number of wires.Exploiting this technology we advance 300 mm epitaxial wafers manufactured in an industrial CMOS fab to a record electron mobility of (3.9±0.6)×10 5 cm 2 /Vs and percolation density of (6.9±0.4)×10 10 cm -2 , representing a key step toward large silicon qubit arrays.We envision that the demonstration will inspire the development of cryogenic electronics for quantum information and because of the simplicity of assembly, low-cost, yet versatility, we foresee widespread use of similar cryo-CMOS circuits for high-throughput quantum measurements and control of quantum engineered systems.