Real-time scattering calculations on a noisy intermediate scale quantum (NISQ) quantum computer are disrupted by errors that accumulate throughout the circuits. To improve the accuracy of such physics simulations, one can supplement the application circuits with a recent error mitigation strategy known as noiseless output extrapolation (NOX). We tested these error mitigation protocols on a transverse field Ising model and improved upon previous phase shift calculations. Our proof-of-concept 4-qubit application circuits were run on several IBM quantum computing hardware architectures. We introduce metrics that show between 22% and 73% error reduction for circuit depths ranging from 13 to 37 hard cycles, confirming that the NOX technique applies to circuits with a broad range of failure rates. We also observed an approximate 28% improvement in the accuracy of the time delay calculation of the scattering phase shift. These observations on different cloud-accessible devices confirm that NOX improves performance even when circuits are executed in substantially time-separated batches. Finally, we provide a heuristic method to obtain systematic error bars on the mitigated results, compare them with empirical errors and discuss their effects on phase shift estimates.
Real-time scattering calculations on a noisy intermediate scale quantum (NISQ) quantum computer are disrupted by errors that accumulate throughout the circuits. To improve the accuracy of such physics simulations, one can supplement the application circuits with a recent error mitigation strategy known as noiseless output extrapolation (NOX). We tested these error mitigation protocols on a transverse field Ising model and improved upon previous phase shift calculations. Our proof-of-concept 4-qubit application circuits were run on several IBM quantum computing hardware architectures. We introduce metrics that show between 22% and 73% error reduction for circuit depths ranging from 13 to 37 hard cycles, confirming that the NOX technique applies to circuits with a broad range of failure rates. We also observed an approximate 28% improvement in the accuracy of the time delay calculation of the scattering phase shift. These observations on different cloud-accessible devices confirm that NOX improves performance even when circuits are executed in substantially time-separated batches. Finally, we provide a heuristic method to obtain systematic error bars on the mitigated results, compare them with empirical errors and discuss their effects on phase shift estimates.
In quantum computing, noisy intermediate-scale quantum (NISQ) devices offer unprecedented computational capabilities but are vulnerable to errors, notably measurement inaccuracies that impact computation accuracy. This study explores the efficacy of error mitigation techniques in improving quantum circuit performance on NISQ devices. Techniques such as dynamic decoupling (DD), twirled readout error extraction (T-REx) and zero-noise extrapolation (ZNE) are examined through extensive experimentation on an ideal simulator, IBM Kyoto, and IBM Osaka quantum computers. Results reveal significant performance discrepancies across scenarios, with error mitigation techniques notably enhancing both estimator result and variance values, aligning more closely with ideal simulator outcomes. The comparison results with ideal simulator (having expected result value 0.8284) shows that T-Rex has improved results on IBM Kyoto and enhanced average expected result value from 0.09 to 0.35. Similarly, DD has improved average expected result values from 0.2492 to 0.3788 on IBM Osaka. These findings underscore the critical role of error mitigation in bolstering quantum computation reliability. The results suggest that selection of mitigation technique depends upon quantum circuit and its depth, type of hardware and operations to be performed.
Benchmarking quantum computers for real-time evolution of a (1+1) field theory with error mitigation
Quantum computers open the possibility of performing real-time calculations for quantum field theory scattering processes. We propose to use an index averaging the absolute value of the difference between the accurately calculated Trotter evolution of site occupations and their actual measurements on NISQ machines. The average is over all the qubits for a certain number of Trotter steps. We use this metric to quantify the progress made in successive state-of-the-art machines and error-mitigation techniques. We illustrate the concept with the transverse Ising model in one spatial dimension with four sites using three of IBM's quantum computers (Almaden, Boeblingen, and Melbourne). We discuss the size of the Trotter steps needed to achieve physics goals. Using the proposed metric, we show that readout mitigation methods and Richardson extrapolations of mitigated measurements are very effective for specific numbers of Trotter steps of a chosen size. This specific choice can be applied to other machines and noise mitigation methods. On the other hand, a reliable algorithmic mitigation would require a significantly larger number of smaller Trotter steps.
Increasing the utility of currently available Noisy Intermediate-Scale Quantum (NISQ) devices requires developing efficient methods to mitigate hardware errors. In this work we propose a novel Cyclic Layout Permutations-based Zero-Noise Extrapolation (CLP-ZNE) protocol for such a task. The method leverages the inherent non-uniformity of gate errors in NISQ hardware to extrapolate the expectation value, averaged over cyclic circuit layout permutations, to the level of zero noise. In contrast to the previous layout permutation based approaches, for an n-qubit circuit CLP-ZNE requires execution of only O(n) and at most O(n2) different circuit layouts for circuits of one-dimensional and arbitrary connectivity, respectively. When benchmarked against noise channels modeling the IBM Torino quantum computer, the method reduces a typical error in expectation values of n=12 qubit circuits by an order of magnitude, outperforming standard unitary folding ZNE. By demonstrating the ability to mitigate noise of real hardware specifications, including both depolarizing and T1/T2 relaxation processes, these results give evidence for the applicability of CLP-ZNE to present-day NISQ processors.
Using near-term quantum computers to achieve a quantum advantage requires efficient strategies to improve the performance of the noisy quantum devices presently available. We develop and experimentally validate two efficient error mitigation protocols named ``Noiseless Output Extrapolation" and ``Pauli Error Cancellation" that can drastically enhance the performance of quantum circuits composed of noisy cycles of gates. By combining popular mitigation strategies such as probabilistic error cancellation and noise amplification with efficient noise reconstruction methods, our protocols can mitigate a wide range of noise processes that do not satisfy the assumptions underlying existing mitigation protocols, including non-local and gate-dependent processes. We test our protocols on a four-qubit superconducting processor at the Advanced Quantum Testbed. We observe significant improvements in the performance of both structured and random circuits, with up to 86% improvement in variation distance over the unmitigated outputs. Our experiments demonstrate the effectiveness of our protocols, as well as their practicality for current hardware platforms.
Dynamic quantum circuits integrate mid-circuit measurements and feed-forward operations to enable real-time classical processing and conditional quantum logic. These capabilities are central to key quantum protocols such as quantum error correction, and have recently demonstrated significant potential for reducing quantum resources, including circuit depth and gate count, across a range of applications. However, executing dynamic circuits on real quantum hardware introduces a critical trade-off: while resource requirements decrease, circuit fidelity degrades due to high error rates of mid-circuit measurements, as well as the decoherence errors accumulated during the extended idle periods introduced by both mid-circuit measurements and feed-forward operations. In this paper, we systematically investigate the impact of standard error mitigation techniques on dynamic circuit applications pertaining to Hamiltonian simulation and ground state estimation of physically relevant systems like the Heisenberg model. We explore dynamical decoupling (DD) as a strategy to suppress decoherence and crosstalk errors during idle windows introduced by mid-circuit measurements and feed-forward delays, and also examine error mitigation via zero-noise extrapolation (ZNE). Through experiments conducted on IBM quantum hardware, we benchmark effective combinations of these strategies that maximize the practical benefits of dynamic quantum circuits in these applications. We demonstrate that a combination of DD and ZNE is effective in mitigating the errors introduced during mid-circuit measurements and feed-forward operations, as well as the errors arising from faulty measurements. This approach yields a energy gap improvement of at least 60% in ground state estimation and reduces observed error of time-evolved states by up to 99% for the Ising model and up to 20% for the Heisenberg model.
Distilling precise estimates from noisy intermediate scale quantum (NISQ) data has recently attracted considerable attention Kandala et al., Nature (London) 567, 491 (2019). In order to augment digital qubit metrics, such as gate fidelity, we discuss analog error mitigability, i.e., the ability to accurately distill precise observable estimates, as a hybrid quantum classical computing benchmarking task. Specifically, using Rabi oscillations as a test program, we characterize single qubit error rates on IBM's Poughkeepsie superconducting quantum hardware, incorporate control-mediated noise dependence into a generalized rescaling protocol, and analyze how noise characteristics influence Richardson extrapolation-based error mitigation. Our results identify regions in the space of Hamiltonian control fields and circuit depth which are most amenable to reliable noise extrapolation, as well as shed light on how low-level hardware characterization can be used as a predictive tool for uncertainty quantification in error-mitigated NISQ computations.