Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2201.10672 · Quantum

Efficiently improving the performance of noisy quantum computers

Samuele Ferracin, Akel Hashim, Jean-Loup Ville, Ravi Naik, Arnaud Carignan-Dugas, Hammam Qassim, Alexis Morvan, David Santiago, Irfan A. Siddiqi, Joel J. Wallman

Published Jul 15, 2024• 72 citations
arXivHTMLPDF

Abstract

Using near-term quantum computers to achieve a quantum advantage requires efficient strategies to improve the performance of the noisy quantum devices presently available. We develop and experimentally validate two efficient error mitigation protocols named ``Noiseless Output Extrapolation" and ``Pauli Error Cancellation" that can drastically enhance the performance of quantum circuits composed of noisy cycles of gates. By combining popular mitigation strategies such as probabilistic error cancellation and noise amplification with efficient noise reconstruction methods, our protocols can mitigate a wide range of noise processes that do not satisfy the assumptions underlying existing mitigation protocols, including non-local and gate-dependent processes. We test our protocols on a four-qubit superconducting processor at the Advanced Quantum Testbed. We observe significant improvements in the performance of both structured and random circuits, with up to 86% improvement in variation distance over the unmitigated outputs. Our experiments demonstrate the effectiveness of our protocols, as well as their practicality for current hardware platforms.

DOI
10.22331/q-2024-07-15-1410

Related papers

Efficient noise mitigation technique for quantum computing

Ali Shaib, Mohamad Hussein Naim, Mohammed E. Fouda +2 more

Quantum computers have enabled solving problems beyond the current machines' capabilities. However, this requires handling noise arising from unwanted interactions in these systems. Several protocols have been proposed to address efficient and accurate quantum noise profiling and mitigation. In this work, we propose a novel protocol that efficiently estimates the average output of a noisy quantum device to be used for quantum noise mitigation. The multi-qubit system average behavior is approximated as a special form of a Pauli Channel where Clifford gates are used to estimate the average output for circuits of different depths. The characterized Pauli channel error rates, and state preparation and measurement errors are then used to construct the outputs for different depths thereby eliminating the need for large simulations and enabling efficient mitigation. We demonstrate the efficiency of the proposed protocol on four IBM Q 5-qubit quantum devices. Our method demonstrates improved accuracy with efficient noise characterization. We report up to 88% and 69% improvement for the proposed approach compared to the unmitigated, and pure measurement error mitigation approaches, respectively.

arXiv:2109.05136•Scientific Reports•Mar 8, 2023•31 citations

Theory of quantum error mitigation for non-Clifford gates

David Layden, Bradley Mitchell, Karthik Siva

Quantum error mitigation techniques mimic noiseless quantum circuits by running several related noisy circuits and combining their outputs in particular ways. How well such techniques work is thought to depend strongly on how noisy the underlying gates are. Weakly-entangling gates, like R Z Z ( θ ) for small angles θ , can be much less noisy than entangling Clifford gates, like CNOT and CZ, and they arise naturally in circuits used to simulate quantum dynamics. However, such weakly-entangling gates are non-Clifford, and are therefore incompatible with two of the most prominent error mitigation techniques to date: probabilistic error cancellation (PEC) and the related form of zero-noise extrapolation (ZNE). This paper generalizes these techniques to non-Clifford gates, and comprises two complementary parts. The first part shows how to effectively transform any given quantum channel into (almost) any desired channel, at the cost of a sampling overhead, by adding random Pauli gates and processing the measurement outcomes. This enables us to cancel or properly amplify noise in non-Clifford gates, provided we can first characterize such gates in detail. The second part therefore introduces techniques to do so for noisy R Z Z ( θ ) gates. These techniques are robust to state preparation and measurement (SPAM) errors, and exhibit concentration and sensitivity—crucial statistical properties for many experiments. They are related to randomized benchmarking, and may also be of interest beyond the context of error mitigation. We find that while non-Clifford gates can be less noisy than related Cliffords, their noise is fundamentally more complex, which can lead to surprising and sometimes unwanted effects in error mitigation. Whether this trade-off can be broadly advantageous remains to be seen.

arXiv:2403.18793•Quantum•Feb 10, 2026•15 citations

Mitigating errors by quantum verification and postselection

Rawad Mezher, James K. Mills, Elham Kashefi

Correcting errors due to noise in quantum circuits run on current and near-term quantum hardware is essential for any convincing demonstration of quantum advantage. Indeed, in many cases it has been shown that noise renders quantum circuits efficiently classically simulable, thereby destroying any quantum advantage potentially offered by an ideal (noiseless) implementation of these circuits. Although the technique of quantum error correction (QEC) allows correcting these errors very accurately, QEC usually requires a large overhead of physical qubits which is not reachable with currently available quantum hardware. This has been the motivation behind the field of quantum error mitigation, which aims at developing techniques to correct an important part of the errors in quantum circuits, while also being compatible with current and near-term quantum hardware. In this work, we present a technique for quantum error mitigation which is based on a technique from quantum verification, the so-called accreditation protocol, together with postselection. Our technique allows for correcting the expectation value of an observable $O$, which is the output of multiple runs of noisy quantum circuits, where the noise in these circuits is at the level of preparations, gates, and measurements. We discuss the sample complexity of our procedure and provide rigorous guarantees of errors being mitigated under some realistic assumptions on the noise. Our technique is tailored to time-dependent behaviors, as we allow for the output states to be different between different runs of the accreditation protocol. We validate our findings by running our technique on currently available quantum hardware.

arXiv:2109.14329•Physical Review A•May 27, 2022•14 citations

Enhanced extrapolation-based quantum error mitigation using repetitive structure in quantum algorithms

Boseon Kim, Wooyeong Song, Kwangil Bae +2 more

Abstract Quantum error mitigation is a key enabling technique for extracting reliable computational results from noisy intermediate-scale quantum devices. Among existing approaches, zero-noise extrapolation (ZNE) is widely employed, but its effectiveness deteriorates in high-noise regimes or deep circuits, where measurement outcomes converge to the random-guessing limit. To address this issue, we propose a lightweight, extrapolation-based error mitigation framework that leverages the intrinsic repetitive structure of quantum algorithms. We classify these algorithms into homogeneous and heterogeneous types and efficiently estimate block fidelities using shallow identity sequences of the core operational block, thereby avoiding global circuit folding. Experiments on IBM’s advanced superconducting platform and its corresponding simulator demonstrate that the proposed framework remains effective even in high-noise regimes where folding-based ZNE(f-ZNE) fails due to noise saturation. For a four-qubit Grover search, our approach restores the success probability to near its theoretical value, whereas f-ZNE yields negligible improvement. We further validate the proposed method on a 17-qubit quantum approximate optimization algorithm with layer-dependent parameters, demonstrating robustness beyond fixed-structure circuits. These results indicate that leveraging algorithmic structure provides a practical pathway to extending the performance of extrapolation-based error mitigation on current quantum processors.

arXiv:2507.23314•Quantum Science and Technology•Jun 18, 2026•2 citations

Testing Platform-Independent Quantum Error Mitigation on Noisy Quantum Computers

Vincent Russo, Andrea Mari, Nathan Shammah +2 more

We apply quantum error mitigation techniques to a variety of benchmark problems and quantum computers to evaluate the performance of quantum error mitigation in practice. To do so, we define an empirically motivated, resource-normalized metric of the improvement of error mitigation which we call the improvement factor, and calculate this metric for each experiment we perform. The experiments we perform consist of zero-noise extrapolation and probabilistic error cancellation applied to two benchmark problems run on IBM, IonQ, and Rigetti quantum computers, as well as noisy quantum computer simulators. Our results show that error mitigation is on average more beneficial than no error mitigation — even when normalized by the additional resources used — but also emphasize that the performance of quantum error mitigation depends on the underlying computer.

arXiv:2210.07194•IEEE Transactions on Quantum Engineering•Jan 1, 2023•33 citations

Application of zero-noise-extrapolation-based quantum error mitigation to a silicon spin qubit

Hanseo Sohn, Jaewon Jung, Jaemin Park +5 more

As quantum computing advances towards practical applications, reducing errors remains a crucial frontier for developing near-term devices. Errors in the quantum gates and quantum state readout could result in noisy circuits, which would prevent the acquisition of the exact expectation values of the observables. Although ultimate robustness to errors is known to be achievable by quantum error correction-based fault-tolerant quantum computing, its successful implementation demands large-scale quantum processors with low average error rates that are not yet widely available. In contrast, quantum error mitigation (QEM) offers more immediate and practical techniques, which do not require extensive resources and can be readily applied to existing quantum devices to improve the accuracy of the expectation values. Here, we report the implementation of a zero-noise extrapolation-based error mitigation technique on a silicon spin qubit platform. This technique has recently been successfully demonstrated for other platforms such as superconducting qubits, trapped-ion qubits, and photonic processors. We first explore three methods for amplifying noise on a silicon spin qubit: global folding, local folding, and pulse stretching, using a standard randomized benchmarking protocol. We then apply global folding-based zero-noise extrapolation to the state tomography and achieve a state fidelity of 99.96% (98.52%), compared to the unmitigated fidelity of 75.82% (82.16%) for different preparation states. The results show that the zero-noise extrapolation technique is a versatile approach that is generally adaptable to quantum computing platforms with different noise characteristics through appropriate noise amplification methods.

arXiv:2410.10339•Physical Review A•May 13, 2025•6 citations
Using near-term quantum computers to achieve a quantum advantage requires efficient strategies to improve the performance of the noisy quantum devices presently available. We develop and experimentally validate two efficient error mitigation protocols named Noiseless Output Extrapolation" and Pauli Error Cancellation" that can drastically enhance the performance of quantum circuits composed of noisy cycles of gates. By combining popular mitigation strategies such as probabilistic error cancellation and noise amplification with efficient noise reconstruction methods, our protocols can mitigate a wide range of noise processes that do not satisfy the assumptions underlying existing mitigation protocols, including non-local and gate-dependent processes. We test our protocols on a four-qubit superconducting processor at the Advanced Quantum Testbed. We observe significant improvements in the performance of both structured and random circuits, with up to 86% improvement in variation distance over the unmitigated outputs. Our experiments demonstrate the effectiveness of our protocols, as well as their practicality for current hardware platforms.
Quantum computers have enabled solving problems beyond the current machines' capabilities. However, this requires handling noise arising from unwanted interactions in these systems. Several protocols have been proposed to address efficient and accurate quantum noise profiling and mitigation. In this work, we propose a novel protocol that efficiently estimates the average output of a noisy quantum device to be used for quantum noise mitigation. The multi-qubit system average behavior is approximated as a special form of a Pauli Channel where Clifford gates are used to estimate the average output for circuits of different depths. The characterized Pauli channel error rates, and state preparation and measurement errors are then used to construct the outputs for different depths thereby eliminating the need for large simulations and enabling efficient mitigation. We demonstrate the efficiency of the proposed protocol on four IBM Q 5-qubit quantum devices. Our method demonstrates improved accuracy with efficient noise characterization. We report up to 88% and 69% improvement for the proposed approach compared to the unmitigated, and pure measurement error mitigation approaches, respectively.
Quantum error mitigation techniques mimic noiseless quantum circuits by running several related noisy circuits and combining their outputs in particular ways. How well such techniques work is thought to depend strongly on how noisy the underlying gates are. Weakly-entangling gates, like R Z Z ( θ ) for small angles θ , can be much less noisy than entangling Clifford gates, like CNOT and CZ, and they arise naturally in circuits used to simulate quantum dynamics. However, such weakly-entangling gates are non-Clifford, and are therefore incompatible with two of the most prominent error mitigation techniques to date: probabilistic error cancellation (PEC) and the related form of zero-noise extrapolation (ZNE). This paper generalizes these techniques to non-Clifford gates, and comprises two complementary parts. The first part shows how to effectively transform any given quantum channel into (almost) any desired channel, at the cost of a sampling overhead, by adding random Pauli gates and processing the measurement outcomes. This enables us to cancel or properly amplify noise in non-Clifford gates, provided we can first characterize such gates in detail. The second part therefore introduces techniques to do so for noisy R Z Z ( θ ) gates. These techniques are robust to state preparation and measurement (SPAM) errors, and exhibit concentration and sensitivity—crucial statistical properties for many experiments. They are related to randomized benchmarking, and may also be of interest beyond the context of error mitigation. We find that while non-Clifford gates can be less noisy than related Cliffords, their noise is fundamentally more complex, which can lead to surprising and sometimes unwanted effects in error mitigation. Whether this trade-off can be broadly advantageous remains to be seen.
Correcting errors due to noise in quantum circuits run on current and near-term quantum hardware is essential for any convincing demonstration of quantum advantage. Indeed, in many cases it has been shown that noise renders quantum circuits efficiently classically simulable, thereby destroying any quantum advantage potentially offered by an ideal (noiseless) implementation of these circuits. Although the technique of quantum error correction (QEC) allows correcting these errors very accurately, QEC usually requires a large overhead of physical qubits which is not reachable with currently available quantum hardware. This has been the motivation behind the field of quantum error mitigation, which aims at developing techniques to correct an important part of the errors in quantum circuits, while also being compatible with current and near-term quantum hardware. In this work, we present a technique for quantum error mitigation which is based on a technique from quantum verification, the so-called accreditation protocol, together with postselection. Our technique allows for correcting the expectation value of an observable OOO, which is the output of multiple runs of noisy quantum circuits, where the noise in these circuits is at the level of preparations, gates, and measurements. We discuss the sample complexity of our procedure and provide rigorous guarantees of errors being mitigated under some realistic assumptions on the noise. Our technique is tailored to time-dependent behaviors, as we allow for the output states to be different between different runs of the accreditation protocol. We validate our findings by running our technique on currently available quantum hardware.
Abstract Quantum error mitigation is a key enabling technique for extracting reliable computational results from noisy intermediate-scale quantum devices. Among existing approaches, zero-noise extrapolation (ZNE) is widely employed, but its effectiveness deteriorates in high-noise regimes or deep circuits, where measurement outcomes converge to the random-guessing limit. To address this issue, we propose a lightweight, extrapolation-based error mitigation framework that leverages the intrinsic repetitive structure of quantum algorithms. We classify these algorithms into homogeneous and heterogeneous types and efficiently estimate block fidelities using shallow identity sequences of the core operational block, thereby avoiding global circuit folding. Experiments on IBM’s advanced superconducting platform and its corresponding simulator demonstrate that the proposed framework remains effective even in high-noise regimes where folding-based ZNE(f-ZNE) fails due to noise saturation. For a four-qubit Grover search, our approach restores the success probability to near its theoretical value, whereas f-ZNE yields negligible improvement. We further validate the proposed method on a 17-qubit quantum approximate optimization algorithm with layer-dependent parameters, demonstrating robustness beyond fixed-structure circuits. These results indicate that leveraging algorithmic structure provides a practical pathway to extending the performance of extrapolation-based error mitigation on current quantum processors.
We apply quantum error mitigation techniques to a variety of benchmark problems and quantum computers to evaluate the performance of quantum error mitigation in practice. To do so, we define an empirically motivated, resource-normalized metric of the improvement of error mitigation which we call the improvement factor, and calculate this metric for each experiment we perform. The experiments we perform consist of zero-noise extrapolation and probabilistic error cancellation applied to two benchmark problems run on IBM, IonQ, and Rigetti quantum computers, as well as noisy quantum computer simulators. Our results show that error mitigation is on average more beneficial than no error mitigation — even when normalized by the additional resources used — but also emphasize that the performance of quantum error mitigation depends on the underlying computer.
As quantum computing advances towards practical applications, reducing errors remains a crucial frontier for developing near-term devices. Errors in the quantum gates and quantum state readout could result in noisy circuits, which would prevent the acquisition of the exact expectation values of the observables. Although ultimate robustness to errors is known to be achievable by quantum error correction-based fault-tolerant quantum computing, its successful implementation demands large-scale quantum processors with low average error rates that are not yet widely available. In contrast, quantum error mitigation (QEM) offers more immediate and practical techniques, which do not require extensive resources and can be readily applied to existing quantum devices to improve the accuracy of the expectation values. Here, we report the implementation of a zero-noise extrapolation-based error mitigation technique on a silicon spin qubit platform. This technique has recently been successfully demonstrated for other platforms such as superconducting qubits, trapped-ion qubits, and photonic processors. We first explore three methods for amplifying noise on a silicon spin qubit: global folding, local folding, and pulse stretching, using a standard randomized benchmarking protocol. We then apply global folding-based zero-noise extrapolation to the state tomography and achieve a state fidelity of 99.96% (98.52%), compared to the unmitigated fidelity of 75.82% (82.16%) for different preparation states. The results show that the zero-noise extrapolation technique is a versatile approach that is generally adaptable to quantum computing platforms with different noise characteristics through appropriate noise amplification methods.