Non-local effects have the potential to radically move forward quantum enhanced imaging to provide an advantage over classical imaging not only in laboratory environments but practical implementation. In this work, we demonstrate a 43dB higher signal-to-noise ratio (SNR) using a quantum enhanced LiDAR based on time-frequency entanglement compared with a classical phase-insensitive quantum imaging system. Our system can tolerate more than 3 orders of magnitude higher noise than classical single-photon counting quantum imaging systems before detector saturation with a detector dead time of 25ns. To achieve these advantages, we use non-local cancellation of dispersion to take advantage of the strong temporal correlations in photon pairs in spite of the orders of magnitude larger detector temporal uncertainty. We go on to incorporate this scheme with purpose-built scanning collection optics to image non-reflecting targets in an environment with noise.
Non-local effects have the potential to radically move forward quantum enhanced imaging to provide an advantage over classical imaging not only in laboratory environments but practical implementation. In this work, we demonstrate a 43dB higher signal-to-noise ratio (SNR) using a quantum enhanced LiDAR based on time-frequency entanglement compared with a classical phase-insensitive quantum imaging system. Our system can tolerate more than 3 orders of magnitude higher noise than classical single-photon counting quantum imaging systems before detector saturation with a detector dead time of 25ns. To achieve these advantages, we use non-local cancellation of dispersion to take advantage of the strong temporal correlations in photon pairs in spite of the orders of magnitude larger detector temporal uncertainty. We go on to incorporate this scheme with purpose-built scanning collection optics to image non-reflecting targets in an environment with noise.
Quantum enhanced optical target detection provides a unique route to increased noise resilience of classical LiDARs (laser imaging, detection, and ranging) by using time correlation of non-classical photon pairs. Such enhancement is dictated by the detector temporal uncertainty that is typically orders of magnitude larger than the intrinsic correlation time. To circumvent such detector limitation, we explore the possibility of measuring correlation in the fractional-order Fourier domain (FrFD), which can be realized with the non-local dispersion cancellation. Experimentally, we verify this principle using a fiber-coupled waveguide source of photon pairs, showing enhanced noise rejection as compared with conventional time-domain coincidence detection and classical intensity detection. For false alarm rates of 10 −9 , an 89 dB improved detection rate is measured using receiver operating characteristics when comparing our FrFD protocol with classical intensity detection. Additionally, we discussed the resilience of FrFD correlation against intentionally prepared counterfeit signal photons. The possibility enabled by measuring correlation in the FrFD should also provide potential benefit for various sensing and communication protocols that relies on coincidence detection.
Quantum light detection and ranging (LiDAR) utilizes quantum entanglement and correlation to improve precision, noise resilience and covertness of target detection. Despite recent advances, the development of a quantum LiDAR system that simultaneously achieves high precision and a large measurement range remains challenging. Here, we demonstrate a quantum amplitude-modulated continuous wave LiDAR with micrometer precision achievable via increased acquisition time and meter-scale measurement range. In our demonstration, the signal photons directly illuminate the target, while the idler photons are non-locally modulated with a high-frequency cosine wave and never interact with the target. By leveraging the non-local modulation and the quantum correlation, the target detection is achieved with a precision of 0.64 ± 0.06 mm within one second over a measurement range of 2-8 m. As the acquisition time is up to 500 s, the system achieves a precision of 29 ±4μm. Furthermore, our system realizes a 50 times precision improvement over the classical single-photon scheme in a background noise 37 dB stronger than the returned probe photons. With these advantages, our method will open venues for the development of high-precision, long-range, and noise-resilient target detection.
Quantum imaging utilizes the correlation of photons to enhance the security, covertness, and noise resilience of optical imaging. Despite recent advances, developing a quantum imaging system with long-distance and strong noise resilience remains challenging. Here, we present an experimental demonstration of high-performance quantum imaging at telecom band with enhanced noise resilience. We use a fiber-integrated quantum light source via cascaded second-order nonlinear processes to generate high-quality correlated/entangled photon pairs at telecom band and a fiber-coupled confocal optical system to effectively suppress the background noise and improve the collection efficiency of echo signal photons by optimizing its bandwidth and aperture. In our demonstration, the quantum imaging with correlated/entangled photon pairs or heralded single photons is achieved at a distance of 11 m under indoor illumination. When the detected environment noise is 33 dB stronger than the signal photons, corresponding to a coincidence-to-accidental coincidence ratio of 1.7 ± 0.1, an imaging contrast of 0.23 ± 0.09 is achieved, which is 46 times higher than single-photon imaging without correlation. The results will open venues for the development of practical quantum imaging techniques.
Quantum states of light play a pivotal role in pushing the boundaries of sensitivity and accuracy in optical sensing and metrology, surpassing the limitations of classical laser sources. This thesis explores the innovative approach of harnessing the unique correlation and entanglement properties of quantum light for two vital applications in the field: optical target detection and fiber optical sensing and metrology. In the first half of this thesis, we explore the possibilities of using time-frequency correlation and entanglement of quantum (and quantum-inspired) light sources to enhance the noise resilience of optical target detection. We present three optical target detection protocols based on different yet similar operational principles, and they correspondingly offer different quantum (or quantum-inspired) enhancements. First, it is shown that by characterizing the temporal correlation between entangled photons through temporal domain photon counting, the impact of uncorrelated background noise can be drastically reduced. Second, we show that in addition to temporal correlation, frequency correlation can also be simultaneously analyzed through the joint measurement of time-frequency entanglement. Theoretical analysis shows that, by doing so, twice as much noise resilience can be achieved as compared to using temporal correlation alone. Third, we show that the coherent optical receiver used in the previous protocol can also be used in classical LiDARs. Such a quantum-inspired LiDAR is capable of a larger detection range (with high-power classical sources) while retaining similar noise resilience enhancement (over 100 dB rejection of inband noise with a 100 ms integration time). In the second half of the thesis, we present a novel all-fiber-based squeezed light source based on travelling-wave optical parametric amplification. Its operational principle is inspired by the time-frequency entanglement properties of quantum photon pairs and the bichromatic local oscillator technique. We experimentally demonstrate over 5.05 dB shot noise reduction (detection limited) using balanced homodyne detection. We anticipate that its robust, all-fiber form factor can benefit practical fiber optical sensing and metrology applications, such as fiber optical gyroscopes and distributed fiber sensing.
We demonstrate a quantum-enhanced lidar capable of performing confident target detection and rangefinding in the presence of strong, time-varying classical noise whilst operating with over five orders of magnitude separation between signal and background levels and target reflectivities down to -52 dB. We use a log-likelihood-based framework to introduce a new protocol for dynamic background tracking, verifying resilience of our system to both fast- and slow-modulation jamming in regimes where a classical illumination-based system fails to find a target. These results demonstrate the advantage of exploiting quantum correlations for lidar applications, providing a clear route to implementation in real-world scenarios.
In order to enhance LIDAR performance metrics such as target detection sensitivity, noise resilience and ranging accuracy, we exploit the strong temporal correlation within the photon pairs generated in continuous-wave pumped semiconductor waveguides. The enhancement attained through the use of such non-classical sources is measured and compared to a corresponding target detection scheme based on simple photon-counting detection. The performances of both schemes are quantified by the estimation uncertainty and Fisher information of the probe photon transmission, which is a widely adopted sensing figure of merit. The target detection experiments are conducted with high probe channel loss (≃1−5×10−5) and formidable environment noise up to 36 dB stronger than the detected probe power of 1.64×10−5 pW. The experimental result shows significant advantages offered by the enhanced scheme with up to 26.3 dB higher performance in terms of estimation uncertainty, which is equivalent to a reduction of target detection time by a factor of 430 or 146 (21.6 dB) times more resilience to noise. We also experimentally demonstrated ranging with these non-classical photon pairs generated with continuous-wave pump in the presence of strong noise and loss, achieving ≈5 cm distance resolution that is limited by the temporal resolution of the detectors.