Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2004.06754 · Optica

Enhancing LIDAR performance metrics using continuous-wave photon-pair sources

Han Liu, Daniel Giovannini, Haoyu He, Duncan G. England, Benjamin J. Sussman, Bhashyam Balaji, Amr S. Helmy

Published Oct 9, 2019• 66 citations
arXivHTMLPDF

Abstract

In order to enhance LIDAR performance metrics such as target detection sensitivity, noise resilience and ranging accuracy, we exploit the strong temporal correlation within the photon pairs generated in continuous-wave pumped semiconductor waveguides. The enhancement attained through the use of such non-classical sources is measured and compared to a corresponding target detection scheme based on simple photon-counting detection. The performances of both schemes are quantified by the estimation uncertainty and Fisher information of the probe photon transmission, which is a widely adopted sensing figure of merit. The target detection experiments are conducted with high probe channel loss (\(\simeq 1-5\times10^{-5}\)) and formidable environment noise up to 36 dB stronger than the detected probe power of \(1.64\times 10^{-5}\) pW. The experimental result shows significant advantages offered by the enhanced scheme with up to 26.3 dB higher performance in terms of estimation uncertainty, which is equivalent to a reduction of target detection time by a factor of 430 or 146 (21.6 dB) times more resilience to noise. We also experimentally demonstrated ranging with these non-classical photon pairs generated with continuous-wave pump in the presence of strong noise and loss, achieving \(\approx\)5 cm distance resolution that is limited by the temporal resolution of the detectors.

DOI
10.1364/optica.6.001349

Related papers

Non-Classical Semiconductor Photon Sources Enhancing the Performance of Classical Target Detection Systems

Haoyu He, Daniel Giovannini, Han Liu +3 more

We demonstrate and analyze how deploying non-classical intensity correlations obtained from a monolithic semiconductor quantum photon source can enhance classical target detection systems. This is demonstrated by examining the advantages offered by the utilization of the non-classical correlations in a correlation based target detection protocol. We experimentally demonstrate that under the same condition, the target contrast obtained from the protocol when non-classical correlations are utilized exhibits an improvement of up to 17.79 dB over the best classical intensity correlation-based target detection protocol [1], under 29.69dB channel loss and excess noise 13.40dB stronger than the probe signal. We also assessed how the strong frequency correlations within the non-classical photon pairs can be used to further enhance this protocol.

arXiv:2004.06785•Journal of Lightwave Technology•Apr 13, 2020•6 citations

Noise resilient and accurate target detection using fractional-order Fourier domain correlation

Georgios Papangelakis, Phillip S. Blakey, Han Liu +2 more

Quantum enhanced optical target detection provides a unique route to increased noise resilience of classical LiDARs (laser imaging, detection, and ranging) by using time correlation of non-classical photon pairs. Such enhancement is dictated by the detector temporal uncertainty that is typically orders of magnitude larger than the intrinsic correlation time. To circumvent such detector limitation, we explore the possibility of measuring correlation in the fractional-order Fourier domain (FrFD), which can be realized with the non-local dispersion cancellation. Experimentally, we verify this principle using a fiber-coupled waveguide source of photon pairs, showing enhanced noise rejection as compared with conventional time-domain coincidence detection and classical intensity detection. For false alarm rates of 10 −9 , an 89 dB improved detection rate is measured using receiver operating characteristics when comparing our FrFD protocol with classical intensity detection. Additionally, we discussed the resilience of FrFD correlation against intentionally prepared counterfeit signal photons. The possibility enabled by measuring correlation in the FrFD should also provide potential benefit for various sensing and communication protocols that relies on coincidence detection.

Optica Quantum•Sep 12, 2024•1 citation

Quantum LiDAR with non-local modulation

Xiao-Dong Fan, Zhong-Hua Ou, Yun-Ru Fan +13 more

Quantum light detection and ranging (LiDAR) utilizes quantum entanglement and correlation to improve precision, noise resilience and covertness of target detection. Despite recent advances, the development of a quantum LiDAR system that simultaneously achieves high precision and a large measurement range remains challenging. Here, we demonstrate a quantum amplitude-modulated continuous wave LiDAR with micrometer precision achievable via increased acquisition time and meter-scale measurement range. In our demonstration, the signal photons directly illuminate the target, while the idler photons are non-locally modulated with a high-frequency cosine wave and never interact with the target. By leveraging the non-local modulation and the quantum correlation, the target detection is achieved with a precision of 0.64 $\pm$ 0.06 mm within one second over a measurement range of 2-8 m. As the acquisition time is up to 500 s, the system achieves a precision of 29 $\pm\ 4{\ \mathrm{μm}}$. Furthermore, our system realizes a 50 times precision improvement over the classical single-photon scheme in a background noise 37 dB stronger than the returned probe photons. With these advantages, our method will open venues for the development of high-precision, long-range, and noise-resilient target detection.

quant-pharXiv:2606.27838•Jun 29, 2026•0 citations

Enhancing Quantum Optical Sensing and Metrology using Correlation and Entanglement of Quantum and Classical Light

Liu Han

Quantum states of light play a pivotal role in pushing the boundaries of sensitivity and accuracy in optical sensing and metrology, surpassing the limitations of classical laser sources. This thesis explores the innovative approach of harnessing the unique correlation and entanglement properties of quantum light for two vital applications in the field: optical target detection and fiber optical sensing and metrology. In the first half of this thesis, we explore the possibilities of using time-frequency correlation and entanglement of quantum (and quantum-inspired) light sources to enhance the noise resilience of optical target detection. We present three optical target detection protocols based on different yet similar operational principles, and they correspondingly offer different quantum (or quantum-inspired) enhancements. First, it is shown that by characterizing the temporal correlation between entangled photons through temporal domain photon counting, the impact of uncorrelated background noise can be drastically reduced. Second, we show that in addition to temporal correlation, frequency correlation can also be simultaneously analyzed through the joint measurement of time-frequency entanglement. Theoretical analysis shows that, by doing so, twice as much noise resilience can be achieved as compared to using temporal correlation alone. Third, we show that the coherent optical receiver used in the previous protocol can also be used in classical LiDARs. Such a quantum-inspired LiDAR is capable of a larger detection range (with high-power classical sources) while retaining similar noise resilience enhancement (over 100 dB rejection of inband noise with a 100 ms integration time). In the second half of the thesis, we present a novel all-fiber-based squeezed light source based on travelling-wave optical parametric amplification. Its operational principle is inspired by the time-frequency entanglement properties of quantum photon pairs and the bichromatic local oscillator technique. We experimentally demonstrate over 5.05 dB shot noise reduction (detection limited) using balanced homodyne detection. We anticipate that its robust, all-fiber form factor can benefit practical fiber optical sensing and metrology applications, such as fiber optical gyroscopes and distributed fiber sensing.

•Nov 1, 2024•0 citations

Inspiring radar from quantum-enhanced lidar

Han Liu, Amr S. Helmy, Bhashyam Balaji

The detection of objects under large background conditions is a problem of fundamental interest in sensing. In this talk we theoretically analyze a prototype target detection protocol, the quantum time correlated (QTC) detection protocol, with spontaneous parametric down-converted photon-pair sources. The QTC detection protocol only requires time-resolved photon counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol we also consider a classical phase-insensitive target detection protocol based on intensity detection. We formulated the target detection problem as a total probe photon transmission estimation problem. We carry out experiments using a semiconductor waveguide source. The experimental results agree very well with the theoretical prediction. In particular, we find that in a high-level environment noise and loss, the QTC detection protocol is able to achieve comparable to the classical protocol target detection performance but with 10–100 fold lower required time on target detection in terms of ROC curve metric. The performance of the QTC detection experiment setup could be further improved with a higher transmission of the reference photon and better detector time uncertainty. Furthermore, unlike classical target detection and ranging protocol, the probe photons in our QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable and tunable and thus amenable to large scale integration necessary for practical applications.

IEEE International Radar Conference•Apr 1, 2020•3 citations

Comparison and limitations of quantum lidar in the single-photon regime

Anthony Drouin, Jean-Philippe Bourgoin, Sara Hosseini +3 more

Quantum lidar leverages the quantum properties of light to gain advantages over classical lidar, such as enhancing range accuracy and reducing the emitted optical power needed to detect a target. The low optical power makes quantum lidar especially attractive for minimizing the probability of being detected by an adversary. Various quantum sources have been considered for quantum lidar; however, a practical comparison between such widely different systems is challenging. Here, we develop a theoretical model tailored to quantum lidar for stealth ranging and imaging, and compare the performance of such systems using an attenuated pulsed laser, a quantum dot single-photon source, and a spontaneous parametric down-conversion correlated photon pair source. To ensure a fair comparison, all sources employ time correlations for detection and are equalized in terms of optical power and detectability by an adversary. Furthermore, we demonstrate the limitation of the signal-to-noise ratio (SNR) as a sole metric, as it ignores the acquisition time required to confidently identify a target. To address the limitation of SNR, we supplement this metric with receiver operating characteristic (ROC) curves. With the inclusion of ROC curves, we find that the pulsed laser and the quantum dot single-photon source outperform the correlated photon pair source when an adversary possesses a non-photon-number-resolving detector. In contrast, when facing a photon-number-resolving detector, the quantum dot single-photon source remains optimal while the correlated photon pair source outperforms the pulsed laser. Our findings demonstrate that the use of a correlated photon pair source for quantum lidar does not always outperform alternative sources with equal SNR and optical power. Finally, using ROC curves, we establish the practical range limitations of quantum lidar.

Optica Quantum•Sep 17, 2026•0 citations
In order to enhance LIDAR performance metrics such as target detection sensitivity, noise resilience and ranging accuracy, we exploit the strong temporal correlation within the photon pairs generated in continuous-wave pumped semiconductor waveguides. The enhancement attained through the use of such non-classical sources is measured and compared to a corresponding target detection scheme based on simple photon-counting detection. The performances of both schemes are quantified by the estimation uncertainty and Fisher information of the probe photon transmission, which is a widely adopted sensing figure of merit. The target detection experiments are conducted with high probe channel loss ((\simeq 1-5\times10^{-5})) and formidable environment noise up to 36 dB stronger than the detected probe power of (1.64\times 10^{-5}) pW. The experimental result shows significant advantages offered by the enhanced scheme with up to 26.3 dB higher performance in terms of estimation uncertainty, which is equivalent to a reduction of target detection time by a factor of 430 or 146 (21.6 dB) times more resilience to noise. We also experimentally demonstrated ranging with these non-classical photon pairs generated with continuous-wave pump in the presence of strong noise and loss, achieving (\approx)5 cm distance resolution that is limited by the temporal resolution of the detectors.
We demonstrate and analyze how deploying non-classical intensity correlations obtained from a monolithic semiconductor quantum photon source can enhance classical target detection systems. This is demonstrated by examining the advantages offered by the utilization of the non-classical correlations in a correlation based target detection protocol. We experimentally demonstrate that under the same condition, the target contrast obtained from the protocol when non-classical correlations are utilized exhibits an improvement of up to 17.79 dB over the best classical intensity correlation-based target detection protocol [1], under 29.69dB channel loss and excess noise 13.40dB stronger than the probe signal. We also assessed how the strong frequency correlations within the non-classical photon pairs can be used to further enhance this protocol.
Quantum enhanced optical target detection provides a unique route to increased noise resilience of classical LiDARs (laser imaging, detection, and ranging) by using time correlation of non-classical photon pairs. Such enhancement is dictated by the detector temporal uncertainty that is typically orders of magnitude larger than the intrinsic correlation time. To circumvent such detector limitation, we explore the possibility of measuring correlation in the fractional-order Fourier domain (FrFD), which can be realized with the non-local dispersion cancellation. Experimentally, we verify this principle using a fiber-coupled waveguide source of photon pairs, showing enhanced noise rejection as compared with conventional time-domain coincidence detection and classical intensity detection. For false alarm rates of 10 −9 , an 89 dB improved detection rate is measured using receiver operating characteristics when comparing our FrFD protocol with classical intensity detection. Additionally, we discussed the resilience of FrFD correlation against intentionally prepared counterfeit signal photons. The possibility enabled by measuring correlation in the FrFD should also provide potential benefit for various sensing and communication protocols that relies on coincidence detection.
Quantum light detection and ranging (LiDAR) utilizes quantum entanglement and correlation to improve precision, noise resilience and covertness of target detection. Despite recent advances, the development of a quantum LiDAR system that simultaneously achieves high precision and a large measurement range remains challenging. Here, we demonstrate a quantum amplitude-modulated continuous wave LiDAR with micrometer precision achievable via increased acquisition time and meter-scale measurement range. In our demonstration, the signal photons directly illuminate the target, while the idler photons are non-locally modulated with a high-frequency cosine wave and never interact with the target. By leveraging the non-local modulation and the quantum correlation, the target detection is achieved with a precision of 0.64 ±\pm± 0.06 mm within one second over a measurement range of 2-8 m. As the acquisition time is up to 500 s, the system achieves a precision of 29 ± 4 μm\pm\ 4{\ \mathrm{μm}}± 4 μm. Furthermore, our system realizes a 50 times precision improvement over the classical single-photon scheme in a background noise 37 dB stronger than the returned probe photons. With these advantages, our method will open venues for the development of high-precision, long-range, and noise-resilient target detection.
Quantum states of light play a pivotal role in pushing the boundaries of sensitivity and accuracy in optical sensing and metrology, surpassing the limitations of classical laser sources. This thesis explores the innovative approach of harnessing the unique correlation and entanglement properties of quantum light for two vital applications in the field: optical target detection and fiber optical sensing and metrology. In the first half of this thesis, we explore the possibilities of using time-frequency correlation and entanglement of quantum (and quantum-inspired) light sources to enhance the noise resilience of optical target detection. We present three optical target detection protocols based on different yet similar operational principles, and they correspondingly offer different quantum (or quantum-inspired) enhancements. First, it is shown that by characterizing the temporal correlation between entangled photons through temporal domain photon counting, the impact of uncorrelated background noise can be drastically reduced. Second, we show that in addition to temporal correlation, frequency correlation can also be simultaneously analyzed through the joint measurement of time-frequency entanglement. Theoretical analysis shows that, by doing so, twice as much noise resilience can be achieved as compared to using temporal correlation alone. Third, we show that the coherent optical receiver used in the previous protocol can also be used in classical LiDARs. Such a quantum-inspired LiDAR is capable of a larger detection range (with high-power classical sources) while retaining similar noise resilience enhancement (over 100 dB rejection of inband noise with a 100 ms integration time). In the second half of the thesis, we present a novel all-fiber-based squeezed light source based on travelling-wave optical parametric amplification. Its operational principle is inspired by the time-frequency entanglement properties of quantum photon pairs and the bichromatic local oscillator technique. We experimentally demonstrate over 5.05 dB shot noise reduction (detection limited) using balanced homodyne detection. We anticipate that its robust, all-fiber form factor can benefit practical fiber optical sensing and metrology applications, such as fiber optical gyroscopes and distributed fiber sensing.
The detection of objects under large background conditions is a problem of fundamental interest in sensing. In this talk we theoretically analyze a prototype target detection protocol, the quantum time correlated (QTC) detection protocol, with spontaneous parametric down-converted photon-pair sources. The QTC detection protocol only requires time-resolved photon counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol we also consider a classical phase-insensitive target detection protocol based on intensity detection. We formulated the target detection problem as a total probe photon transmission estimation problem. We carry out experiments using a semiconductor waveguide source. The experimental results agree very well with the theoretical prediction. In particular, we find that in a high-level environment noise and loss, the QTC detection protocol is able to achieve comparable to the classical protocol target detection performance but with 10–100 fold lower required time on target detection in terms of ROC curve metric. The performance of the QTC detection experiment setup could be further improved with a higher transmission of the reference photon and better detector time uncertainty. Furthermore, unlike classical target detection and ranging protocol, the probe photons in our QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable and tunable and thus amenable to large scale integration necessary for practical applications.
Quantum lidar leverages the quantum properties of light to gain advantages over classical lidar, such as enhancing range accuracy and reducing the emitted optical power needed to detect a target. The low optical power makes quantum lidar especially attractive for minimizing the probability of being detected by an adversary. Various quantum sources have been considered for quantum lidar; however, a practical comparison between such widely different systems is challenging. Here, we develop a theoretical model tailored to quantum lidar for stealth ranging and imaging, and compare the performance of such systems using an attenuated pulsed laser, a quantum dot single-photon source, and a spontaneous parametric down-conversion correlated photon pair source. To ensure a fair comparison, all sources employ time correlations for detection and are equalized in terms of optical power and detectability by an adversary. Furthermore, we demonstrate the limitation of the signal-to-noise ratio (SNR) as a sole metric, as it ignores the acquisition time required to confidently identify a target. To address the limitation of SNR, we supplement this metric with receiver operating characteristic (ROC) curves. With the inclusion of ROC curves, we find that the pulsed laser and the quantum dot single-photon source outperform the correlated photon pair source when an adversary possesses a non-photon-number-resolving detector. In contrast, when facing a photon-number-resolving detector, the quantum dot single-photon source remains optimal while the correlated photon pair source outperforms the pulsed laser. Our findings demonstrate that the use of a correlated photon pair source for quantum lidar does not always outperform alternative sources with equal SNR and optical power. Finally, using ROC curves, we establish the practical range limitations of quantum lidar.