Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2206.13271 · AIP Advances

A method for loading magneto-optical trap in an ultrahigh vacuum environment

Kavish Bhardwaj, Sourabh Sarkar, Surjya Prakash Ram, Vibhuti Bhushan Tiwari, Satya Ram Mishra

Published Jan 1, 2023• 7 citations
arXivHTMLPDF

Abstract

We have developed a method that enables loading a magneto-optical trap (MOT) in an ultrahigh vacuum environment. Nearly 1.0 × 108 atoms of 87Rb are trapped in the MOT at ∼2.0×10−10 Torr base pressure in the chamber. After the MOT loading, we have successfully demonstrated the working of a quadrupole magnetic trap in this chamber with a lifetime of ∼15 s.

DOI
10.1063/5.0106398

Related papers

On the continuous loading of a U-magneto-optical trap on an atom-chip in an ultra high vacuum

Vivek Singh, Vibhuti Bhushan Tiwari, Satya Ram Mishra

Abstract Here, we report our studies on the continuous loading of a U-magneto-optical trap (U-MOT) on an atom-chip with a rubidium-(Rb)-vapor-generated background using a dispenser source in an ultra high vacuum environment. Using the U-MOT loading curves, the partial pressure due to the Rb vapor and the pressure due to the background gas have been estimated near the MOT cloud position. The estimated pressure due to the Rb vapor increased from ∼ Torr to Torr as the Rb-dispenser current was increased from 2.8 to 3.4 A. The increase in dispenser current also resulted in a decrease in loading time as well as the lifetime of the MOT cloud. This study will be useful for magnetic trapping experiments where accurate information of the pressure in a chamber is important for the lifetime of the magnetic trap.

arXiv:1912.07934•Laser Physics Letters•Jan 28, 2020•10 citations

Efficient Loading of an Atom Chip from a Low-Velocity Atomic Beam

P. I. Skakunenko, D. V. Bykova, Anton E. Afanasiev +1 more

Various regimes of the loading of a magneto-optical trap formed near an atom chip, such as loading from thermal atomic vapors and from a low-velocity atomic beam, have been studied on an example of 87Rb atoms. The possibility of controlling the loading of the magneto-optical trap by spatially controlling the atomic beam has been demonstrated. This has made it possible to increase the loading rate of atoms into the magneto-optical trap with keeping ultrahigh vacuum near the atom chip. The maximum number of atoms in the magneto-optical trap at optimal loading regimes is 4.9 × 107. In this case, the measured lifetime of atoms in the magneto-optical trap is 4.1 s.

Journal of Experimental and Theoretical Physics Letters•Jan 1, 2024•4 citations

Pulsed loading of a magneto-optical trap on an atom chip with fast recovery of ultrahigh vacuum

Vivek Singh, Vibhuti Bhushan Tiwari, A Chaudhary +2 more

Abstract Here, we present studies on pulsed loading of a rubidium (Rb) magneto-optical trap (MOT) in an ultra-high vacuum (UHV) environment on an atom chip. We have used a parallel combination of Rb dispensers for better heat dissipation to achieve fast UHV recovery in the chamber after the end of the current pulse to the dispensers. We have estimated the threshold heat energy required for activation of the dispensers for different values of current pulses. Although a pulse with a higher current value and shorter duration has a lower threshold heat energy, we operated the dispensers at moderate current pulse parameters (24 A, 10 s) for protection of the circuits. Nearly, 3 × 10 7 cold 87 Rb atoms were loaded in the MOT using this current pulse, with a UHV recovery time of ∼600 ms in the chamber. This fast recovery of UHV in the MOT chamber is useful for further experiments such as magnetic trapping and evaporative cooling of atoms in the same chamber.

arXiv:2403.11458•Laser Physics Letters•Dec 19, 2024•1 citation

Magnetic transport of trapped cold atoms over a large distance

Markus Greiner, Immanuel Bloch, Theodor W. Hänsch +1 more

We report the transport of magnetically trapped cold atoms over a large distance. Atoms are captured in a magneto-optical trap (MOT) and loaded into a magnetic quadrupole trap. The quadrupole potential is then moved over a distance of 33 cm into an ultra-high-vacuum (UHV) chamber using a chain of quadrupole coils. By running suitable currents through the quadrupole coil pairs the trapping geometry of the potential is maintained during the transport process, thus minimizing heating of the trapped atom cloud. Magnetically trapped ${}^{87}\mathrm{Rb}$ atoms at an initial temperature of $T=125 \ensuremath{\mu}\mathrm{K}$ were heated by less than $20 \ensuremath{\mu}\mathrm{K}$ during the transport process, and up to ${10}^{9}$ atoms were transferred into the UHV chamber. Due to the spatial separation of the final magnetic trap and the MOT we have been able to capture atoms in the MOT, while storing magnetically trapped atoms in the UHV chamber.

Physical Review A•Feb 9, 2001•180 citations

Ultrahigh vacuum pressure measurement using magneto-optical trap on atom chip

S. Supakar, Vivek Singh, Vibhuti Bhushan Tiwari +1 more

In this work, the UHV background pressure as low as 1.1×10−10 Torr has been measured using the loss rate characteristics of a vapor-loaded magneto-optical trap (MOT) formed on an atom chip in a UHV chamber. The loss rate due to non-rubidium (Rb) gases in the background in the chamber has been estimated by operating the MOT in low cooling beam intensities and low Rb pressure regimes simultaneously. Using this approach, we minimized the contributions of the intra-trap collisions as well as background MOT species collisions to the measured trap loss rate in our setup. These results can be useful for development of cold-atom based UHV pressure standards.

arXiv:2302.14305•Journal of Applied Physics•Jul 10, 2023•6 citations

On loading of a magneto-optical trap on an atom-chip with U-wire quadrupole field

Vivek Singh, Vibhuti Bhushan Tiwari, K. A. P. Singh +1 more

The role of U-wire generated quadrupole-like magnetic field profile on loading of cold 87Rb atoms in a magneto-optical trap (MOT) on atom-chip has been investigated. It is shown by simulations that the quadrupole field profile and the centre of the quadrupole field vary depending upon the U-wire current and bias field values. Moreover, the resemblance of generated field profile to the ideal quadrupole field critically depends on the values of current in U-wire and bias magnetic field. The observed number of trapped atoms in the MOT and its position has also been found to depend on the quadrupole field profile. The number of trapped atoms in the MOT reaches maximum when the field profile approaches close to an ideal quadrupole field. These studies are, in general, useful in optimizing the number in the MOT before transfer of these cold atoms to the microtraps of an atom-chip.

arXiv:1801.09461•Journal of Modern Optics•Aug 21, 2018•12 citations
We have developed a method that enables loading a magneto-optical trap (MOT) in an ultrahigh vacuum environment. Nearly 1.0 × 108 atoms of 87Rb are trapped in the MOT at ∼2.0×10−10 Torr base pressure in the chamber. After the MOT loading, we have successfully demonstrated the working of a quadrupole magnetic trap in this chamber with a lifetime of ∼15 s.
Abstract Here, we report our studies on the continuous loading of a U-magneto-optical trap (U-MOT) on an atom-chip with a rubidium-(Rb)-vapor-generated background using a dispenser source in an ultra high vacuum environment. Using the U-MOT loading curves, the partial pressure due to the Rb vapor and the pressure due to the background gas have been estimated near the MOT cloud position. The estimated pressure due to the Rb vapor increased from ∼ Torr to Torr as the Rb-dispenser current was increased from 2.8 to 3.4 A. The increase in dispenser current also resulted in a decrease in loading time as well as the lifetime of the MOT cloud. This study will be useful for magnetic trapping experiments where accurate information of the pressure in a chamber is important for the lifetime of the magnetic trap.
Various regimes of the loading of a magneto-optical trap formed near an atom chip, such as loading from thermal atomic vapors and from a low-velocity atomic beam, have been studied on an example of 87Rb atoms. The possibility of controlling the loading of the magneto-optical trap by spatially controlling the atomic beam has been demonstrated. This has made it possible to increase the loading rate of atoms into the magneto-optical trap with keeping ultrahigh vacuum near the atom chip. The maximum number of atoms in the magneto-optical trap at optimal loading regimes is 4.9 × 107. In this case, the measured lifetime of atoms in the magneto-optical trap is 4.1 s.
Abstract Here, we present studies on pulsed loading of a rubidium (Rb) magneto-optical trap (MOT) in an ultra-high vacuum (UHV) environment on an atom chip. We have used a parallel combination of Rb dispensers for better heat dissipation to achieve fast UHV recovery in the chamber after the end of the current pulse to the dispensers. We have estimated the threshold heat energy required for activation of the dispensers for different values of current pulses. Although a pulse with a higher current value and shorter duration has a lower threshold heat energy, we operated the dispensers at moderate current pulse parameters (24 A, 10 s) for protection of the circuits. Nearly, 3 × 10 7 cold 87 Rb atoms were loaded in the MOT using this current pulse, with a UHV recovery time of ∼600 ms in the chamber. This fast recovery of UHV in the MOT chamber is useful for further experiments such as magnetic trapping and evaporative cooling of atoms in the same chamber.
We report the transport of magnetically trapped cold atoms over a large distance. Atoms are captured in a magneto-optical trap (MOT) and loaded into a magnetic quadrupole trap. The quadrupole potential is then moved over a distance of 33 cm into an ultra-high-vacuum (UHV) chamber using a chain of quadrupole coils. By running suitable currents through the quadrupole coil pairs the trapping geometry of the potential is maintained during the transport process, thus minimizing heating of the trapped atom cloud. Magnetically trapped 87Rb{}^{87}\mathrm{Rb}87Rb atoms at an initial temperature of $T=125 \ensuremath{\mu}\mathrm{K}$ were heated by less than $20 \ensuremath{\mu}\mathrm{K}$ during the transport process, and up to 109{10}^{9}109 atoms were transferred into the UHV chamber. Due to the spatial separation of the final magnetic trap and the MOT we have been able to capture atoms in the MOT, while storing magnetically trapped atoms in the UHV chamber.
In this work, the UHV background pressure as low as 1.1×10−10 Torr has been measured using the loss rate characteristics of a vapor-loaded magneto-optical trap (MOT) formed on an atom chip in a UHV chamber. The loss rate due to non-rubidium (Rb) gases in the background in the chamber has been estimated by operating the MOT in low cooling beam intensities and low Rb pressure regimes simultaneously. Using this approach, we minimized the contributions of the intra-trap collisions as well as background MOT species collisions to the measured trap loss rate in our setup. These results can be useful for development of cold-atom based UHV pressure standards.
The role of U-wire generated quadrupole-like magnetic field profile on loading of cold 87Rb atoms in a magneto-optical trap (MOT) on atom-chip has been investigated. It is shown by simulations that the quadrupole field profile and the centre of the quadrupole field vary depending upon the U-wire current and bias field values. Moreover, the resemblance of generated field profile to the ideal quadrupole field critically depends on the values of current in U-wire and bias magnetic field. The observed number of trapped atoms in the MOT and its position has also been found to depend on the quadrupole field profile. The number of trapped atoms in the MOT reaches maximum when the field profile approaches close to an ideal quadrupole field. These studies are, in general, useful in optimizing the number in the MOT before transfer of these cold atoms to the microtraps of an atom-chip.