We apply quantum error mitigation techniques to a variety of benchmark problems and quantum computers to evaluate the performance of quantum error mitigation in practice. To do so, we define an empirically motivated, resource-normalized metric of the improvement of error mitigation which we call the improvement factor, and calculate this metric for each experiment we perform. The experiments we perform consist of zero-noise extrapolation and probabilistic error cancellation applied to two benchmark problems run on IBM, IonQ, and Rigetti quantum computers, as well as noisy quantum computer simulators. Our results show that error mitigation is on average more beneficial than no error mitigation — even when normalized by the additional resources used — but also emphasize that the performance of quantum error mitigation depends on the underlying computer.
We apply quantum error mitigation techniques to a variety of benchmark problems and quantum computers to evaluate the performance of quantum error mitigation in practice. To do so, we define an empirically motivated, resource-normalized metric of the improvement of error mitigation which we call the improvement factor, and calculate this metric for each experiment we perform. The experiments we perform consist of zero-noise extrapolation and probabilistic error cancellation applied to two benchmark problems run on IBM, IonQ, and Rigetti quantum computers, as well as noisy quantum computer simulators. Our results show that error mitigation is on average more beneficial than no error mitigation — even when normalized by the additional resources used — but also emphasize that the performance of quantum error mitigation depends on the underlying computer.
Using near-term quantum computers to achieve a quantum advantage requires efficient strategies to improve the performance of the noisy quantum devices presently available. We develop and experimentally validate two efficient error mitigation protocols named ``Noiseless Output Extrapolation" and ``Pauli Error Cancellation" that can drastically enhance the performance of quantum circuits composed of noisy cycles of gates. By combining popular mitigation strategies such as probabilistic error cancellation and noise amplification with efficient noise reconstruction methods, our protocols can mitigate a wide range of noise processes that do not satisfy the assumptions underlying existing mitigation protocols, including non-local and gate-dependent processes. We test our protocols on a four-qubit superconducting processor at the Advanced Quantum Testbed. We observe significant improvements in the performance of both structured and random circuits, with up to 86% improvement in variation distance over the unmitigated outputs. Our experiments demonstrate the effectiveness of our protocols, as well as their practicality for current hardware platforms.
In the noisy intermediate-scale quantum (NISQ) era, quantum error mitigation will be a necessary tool to extract useful performance out of quantum devices. However, there is a big gap between the noise models often assumed by error mitigation techniques and the actual noise on quantum devices. As a consequence, there arises a gap between the theoretical expectations of the techniques and their everyday performance. Cloud users of quantum devices in particular, who often take the devices as they are, feel this gap the most. How should they parametrize their uncertainty in the usefulness of these techniques and be able to make judgement calls between resources required to implement error mitigation and the accuracy required at the algorithmic level? To answer the first question, we introduce hypothesis testing within the framework of quantum error mitigation and for the second question, we propose an inclusive figure of merit that accounts for both resource requirement and mitigation efficiency of an error mitigation implementation. The figure of merit is useful to weigh the trade-offs between the scalability and accuracy of various error mitigation methods. Finally, using the hypothesis testing and the figure of merit, we experimentally evaluate 16 error mitigation pipelines composed of singular methods such as zero noise extrapolation, randomized compilation, measurement error mitigation, dynamical decoupling, and mitigation with estimation circuits. In total our data involved running 275,640 circuits on two IBM quantum computers.
Error mitigation has elevated quantum computing to the scale of hundreds of qubits and tens of layers; however, yet larger scales (deeper circuits) are needed to fully exploit the potential of quantum computing to solve practical problems otherwise intractable. Here we demonstrate three key results that pave the way for the leap from quantum utility to quantum advantage: (1) we present a thorough derivation of random and systematic errors associated to the most advanced error mitigation strategies, including probabilistic error cancellation (PEC), zero noise extrapolation (ZNE) with probabilistic error amplification, and tensor-network error mitigation (TEM); (2) we prove that TEM (i) has the lowest sampling overhead among all three techniques under realistic noise, (ii) is optimal, in the sense that it saturates the universal lower cost bound for error mitigation, and (iii) is therefore the most promising approach to quantum advantage; (3) we propose a concrete notion of practical quantum advantage in terms of the universality of algorithms, stemming from the commercial need for a problem-independent quantum simulation device. We also establish a connection between error mitigation, relying on additional measurements, and error correction, relying on additional qubits, by demonstrating that TEM with a sufficient bond dimension works similarly to an error correcting code of distance 3. We foresee that the interplay and trade-off between the two resources will be the key to a smooth transition between error mitigation and error correction, and hence between near-term and fault-tolerant quantum computers. Meanwhile, we argue that quantum computing with optimal error mitigation, relying on modest classical computer power for tensor network contraction, has the potential to reach larger scales in accurate simulation than classical methods alone.
Quantum error mitigation (QEM) bridges the gap between today's noisy NISQ hardware and fault-tolerant quantum computing by reducing the effect of hardware errors on expectation value estimates without the qubit overhead of full quantum error correction. This paper proposes the Quantum Error Mitigation Design (QEMD) framework, a systematic evaluation of six QEM techniques across four circuit families on IBM Quantum Eagle and IonQ Forte: Zero-Noise Extrapolation (ZNE), Probabilistic Error Cancellation (PEC), Clifford Data Regression (CDR), Symmetry Verification (SV), Dynamical Decoupling (DD), and a novel Adaptive Ensemble Mitigation (AEM) combining ZNE and CDR with context-aware technique selection. QEMD finds: ZNE 3-point Richardson provides the best cost-performance trade-off for QAOA and VQE circuits (4.8x overhead, 28.4pp error reduction); PEC provides the highest accuracy but at 48x shot overhead -- practical only for n <= 12; DD reduces coherence-limited errors by 18.4% on IonQ Forte at zero shot overhead; AEM outperforms all individual techniques by 6.4pp at 8.4x overhead. QEMD provides a decision guide mapping circuit type, qubit count, and shot budget to optimal QEM technique selection.
We present a simple, malleable and low-overhead approach for improving generic biased quantum error mitigation (QEM) methods, achieving up to 15% fidelity improvements over standard QEM on 100-qubit circuits with up to 2000 entangling gates. We do so by constructing verifiable benchmark circuits which mirror the application circuit's native-gate structure and thus noise profile. These circuits can be used to benchmark and mitigate the bias of the underlying error mitigation method, requiring only the application circuit and hardware native gate set. We present two methods for generating benchmark circuits; one is agnostic to the target hardware at the expense of a small overhead of single-qubit gates, while the other is specific to the IBM superconducting hardware and has no gate overhead. As a corollary, we introduce benchmarked-noise zero-noise extrapolation (bnZNE) as a simple adaptation of zero-noise extrapolation (ZNE), one of the most popular error mitigation methods. We consider as an example the bias-mitigated ZNE and bnZNE of Trotterized Hamiltonian simulations, observing that our approaches outperform standard ZNE using both small-scale classical simulations and 100-qubit utility-scale experiments on the IBM superconducting hardware. We consider the measurement of both single-site observables as well as two-site correlations along a one-dimensional qubit chain. We also provide a software package for implementing the error mitigation techniques used in this research.
Digital zero-noise extrapolation (dZNE) has emerged as a common approach for quantum error mitigation (QEM) due to its conceptual simplicity, accessibility, and resource efficiency. In practice, however, properly applying dZNE to extend the computational reach of noisy quantum processors is rife with subtleties. Here, based on literature review and original experiments on noisy simulators and real quantum hardware, we define best practices for QEM with dZNE for each step of the workflow, including noise amplification, execution on the quantum device, extrapolation to the zero-noise limit, and composition with other QEM methods. We anticipate that this effort to establish best practices for dZNE will be extended to other QEM methods, leading to more reproducible and rigorous calculations on noisy quantum hardware. The full version of this paper can be found in Ref. [1].