Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2104.03621 · Physical Review Applied

Electrical Properties of Selective-Area-Grown Superconductor-Semiconductor Hybrid Structures on Silicon

Albert Hertel, L.O. Andersen, D. M. T. van Zanten, M. Eichinger, Pasquale Scarlino, S. Yadav, J. Karthik, Sergei Gronin, Geoffrey C. Gardner, Michael J. Manfra, Charles M. Marcus, Karl D. Petersson

Published Oct 12, 2021• 8 citations
arXivHTMLPDF

Abstract

We present a superconductor-semiconductor materials system that is both scalable and monolithically integrated on a silicon substrate. It uses selective-area growth of $\mathrm{Al}$-$\mathrm{In}\mathrm{As}$ hybrid structures on a planar III-V buffer layer, grown directly on a high-resistivity silicon substrate. We characterize the electrical properties of this materials system at millikelvin temperatures and observe a high average field-effect mobility of $\ensuremath{\mu}\ensuremath{\approx}3200\phantom{\rule{0.2em}{0ex}}{\mathrm{cm}}^{2}\mathrm{/Vs}$ for the $\mathrm{In}\mathrm{As}$ channel and a hard induced superconducting gap. Josephson junctions exhibit a high interface transmission, $\mathcal{T}\ensuremath{\approx}0.75$, a gate-voltage-tunable switching current with a product of critical current and normal state resistance, ${I}_{C}{R}_{N}\ensuremath{\approx}83\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{V}$, and signatures of multiple Andreev reflections. These results pave the way for scalable and high-coherence gate-voltage-tunable transmon devices and other superconductor-semiconductor hybrids fabricated directly on silicon.

DOI
10.1103/physrevapplied.16.044015

Related papers

Gate-Tunable Transmon Using Selective-Area-Grown Superconductor-Semiconductor Hybrid Structures on Silicon

Albert Hertel, M. Eichinger, L.O. Andersen +12 more

We present a gate-voltage-tunable transmon qubit (gatemon) based on planar $\mathrm{In}\mathrm{As}$ nanowires that are selectively grown on a high-resistivity silicon substrate using III-V buffer layers. We show that low-loss superconducting resonators with an internal quality of $2\ifmmode\times\else\texttimes\fi{}{10}^{5}$ can readily be realized using these substrates after the removal of buffer layers. We demonstrate coherent control and readout of a gatemon device with a relaxation time, ${T}_{1}\ensuremath{\approx}700\phantom{\rule{0.2em}{0ex}}\mathrm{ns}$, and dephasing times, ${T}_{2}^{\ensuremath{\ast}}\ensuremath{\approx}20\phantom{\rule{0.2em}{0ex}}\mathrm{ns}$ and ${T}_{2,\mathrm{echo}}\ensuremath{\approx}1.3\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{s}$. Further, we infer a high junction transparency of $0.4$--$0.9$ from an analysis of the qubit anharmonicity.

arXiv:2202.10860•Physical Review Applied•Sep 16, 2022•40 citations

Superconducting thin films and hybrid materials for quantum devices

Sjoerd Telkamp

The performance and coherence of superconducting quantum systems are fundamentally tied to the quality of the materials from which they are built. In superconducting transmon qubits, many loss mechanisms and sources of decoherence originate from material imperfections or unwanted oxide formation. Likewise, semiconductor–superconductor hybrid systems depend on high-quality interfaces to ensure strong coupling between electronic states in the two materials. In such hybrid devices, the accessible operating regime is often dictated by the intrinsic material properties of either the semiconductor or the superconductor. Advancing quantum device performance therefore requires exploring new material systems and optimizing their physical characteristics. In this thesis, we present the development of several superconducting material platforms for quantum technologies, including superconducting qubits, single-photon detectors, and semiconductor superconductor hybrid devices. We focus on the growth and characterization of superconducting films and heterostructures, and we establish clear connections between their material properties and the resulting device performance. First, we will present a novel semiconductor-superconductor hybrid material based on in-situ deposited epitaxial layers of Nb and Al on a shallow InAs quantum well. In this structure, the Al interlayer provides an epitaxial connection between an in-situ magnetron sputtered Nb or NbTi thin film and a shallow InAs two dimensional electron gas. This metal-to-metal epitaxy is achieved by optimization of the material stack and results in an induced superconducting gap of approximately 1 meV, determined from transport measurements of superconductor semiconductor Josephson junctions. This induced gap is approximately five times larger than the values reported for Al-based hybrid materials and indicates the formation of highly-transparent interfaces that are required in high-quality hybrid material platforms. Then, we discuss a different approach in the next chapter where we develop a hybrid material based on a molecular beam epitaxy grown InAsSb surface quantum well with an in-situ deposited Nb layer directly on top of the quantum well. Relative to conventional Al-InAs based systems, the InAsSb surface quantum well offers a lower effective mass and stronger spin-orbit interaction, while the Nb layer has a higher critical temperature and a larger critical magnetic field. The in-situ deposition of the Nb layer directly on top of the quantum well results in a high-quality interface that enables strong coupling to the InAsSb quantum well. Transport measurements on Josephson junctions reveal an induced superconducting gap of 1.3 meV and a critical current density of 3.75 × 10³A/cm². Furthermore, a planar asymmetric SQUID is realized, exhibiting gate-tunable superimposed oscillations originating from both the individual Josephson junction and the full SQUID loop. The large induced superconducting gap combined with strong spin-orbit interaction position this material as an attractive platform for experiments exploring gate-tunable superconductivity and topological superconducting devices. In the next chapter, we will focus on establishing a link between Nb film crystal properties and their performance in superconducting circuits. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over 10⁶ at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasi-particle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Then, we explore yet a different material platform by attempting to realize onchip NbTiN single photon detectors on LiNbO₃, an emerging photonic platform with high potential for scalable quantum information processing. We use DC reactive magnetron sputtering to grow high-quality NbTiN thin films and investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature (𝑇𝑐) of 12.3 K grown at a substrate temperature of 825 K. We demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LiNbO3 platform and investigate the obtained interface quality. Finally, we fabricate superconducting nanowire single photon detectors from the NbTiN film on LiNbO₃ and characterize the detector performance. Lastly, we report a gate-tunable Josephson diode effect in hybrid nanowire junctions consisting of a spin-orbit-coupled semiconductor core coated with epitaxial ferromagnetic insulator and superconductor shells. The wires display a hysteretic superconducting window as a function of axial magnetic field. In the superconducting regime, the devices exhibit nonreciprocal current transport, with the diode efficiency showing a strong dependence on back-gate voltage. The effect persists in a remanent magnetization state following a controlled demagnetization procedure, establishing zero-field operation. The combination of results presented in this thesis stress the importance of a material-focused approach in advancing the performance of quantum hardware. The novel hybrid material platforms developed in this thesis expand the operating regime of devices, which could enable future experiments involving gate-tunable superconductivity or topological properties. Similarly, we demonstrate that optimizing superconductor crystal structure benefits quantum devices, such as single-photon detectors and superconducting resonators.

•Jan 1, 2026•0 citations

Epitaxial superconductor-semiconductor two-dimensional systems for superconducting quantum circuits

Joseph O’Connell Yuan, Kaushini S. Wickramasinghe, William M. Strickland +4 more

Qubits on solid state devices could potentially provide the rapid control necessary for developing scalable quantum information processors. Materials innovation and design breakthroughs have increased functionality and coherence of qubits substantially over the past two decades. Here, we show by improving interface between InAs as a semiconductor and Al as a superconductor, one can reliably fabricate voltage-controlled Josephson junction field effect transistor (JJ-FET) that can be used as tunable qubits, resonators, and coupler switches. We find that bandgap engineering is crucial in realizing a two-dimensional electron gas near the surface. In addition, we show how the coupling between the semiconductor layer and the superconducting contacts can affect qubit properties. We present the anharmonicity and coupling strengths from one and two-photon absorption in a quantum two level system fabricated with a JJ-FET.

arXiv:2104.01159•Journal of Vacuum Science & Technology A Vacuum Surfaces and Films•Mar 23, 2021•27 citations

Gate-tunable Josephson parametric amplifiers based on semiconductor nanowires

Raphael Rousset-Zenou, Nicolás Aparicio, Simon Messelot +5 more

Superconductor-semiconductor hybrid materials have been extensively used for experiments on electrically tunable quantum devices. Notably, Josephson junctions utilizing nanowire weak links have enabled a number of new gate-tunable qubits, including gatemons, Andreev level qubits and spin qubits. Conversely, superconducting parametric amplifiers based on Josephson junctions have not yet been implemented using nanowires, even though such nearly quantum limited amplifiers are key elements in experiments on quantum circuits. Here we present Josephson parametric amplifiers based on arrays of parallel InAs nanowires that feature a large critical current as required for linear amplification. The resonance frequency of the devices is gate-tunable by almost 1 GHz, with a gain exceeding 20 dB in multiple frequencies and markedly improved noise performance compared to a low-temperature commercial amplifier. This platform enables on-chip integration of gate-tunable qubits with nearly quantum limited amplifiers using the same hybrid materials and on any substrate.

arXiv:2510.00305•Sep 30, 2025•3 citations

Superconducting-Semiconducting Voltage-Tunable Qubits in the Third Dimension

Thomas Hazard, Andrew J. Kerman, Kyle Serniak +1 more

We propose superconducting-semiconducting (super-semi) qubit and coupler designs based on high-quality compact through-silicon vias (TSVs) to overcome challenges introduced by materials and processing required to fabricate high-quality super-semi Josephson junctions. In our designs, an interposer ``probe'' wafer containing TSVs is used to contact a sample wafer with, e.g., a superconductor-proximitized epitaxially grown germanium quantum well. By utilizing the capacitance of the probe-wafer TSVs, the majority of the electric field in the qubits is pulled away from lossy regions in the semiconducting wafer, such as the graded buffer layers sometimes required for epitaxial growth. Through simulations, we find that the probe wafer can reduce the electric field participation of the qubit in the sample wafer by an order of magnitude for thin substrates and remains small even when the epitaxial-layer thickness approaches $100\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{m}$. We also show how the qubit-coherence improvements achieved via this scheme are extensible to multiqubit systems that have tunable qubit-qubit couplings without magnetic fields. This approach additionally shrinks the on-chip footprint of voltage-tunable superconducting qubits while homogenizing critical wiring structures independent of semiconducting materials, which could aid in accelerating the understanding of super-semi heterostructures in a variety of systems.

arXiv:2203.06209•Physical Review Applied•Sep 25, 2023•9 citations

Voltage-tunable Josephson junctions on germanium quantum wells with in situ aluminum contacts

J. P. Thompson, J. T. Dong, B. Langa +12 more

Voltage-tunable Josephson junctions (VT-JJs) are an emerging element in superconducting quantum electronics with potential to expand the functionality of conventional designs. While VT-JJs are largely compatible with wafer-scale semiconductor processing, their integration into quantum circuits remains a challenge due to unmitigated semiconductor microwave loss. Here, a deep mesa etch process, wherein the epitaxial material is removed except the VT-JJ device, will facilitate the integration of VT-JJs with low-microwave-loss circuit elements by allowing these circuit elements to be placed directly on a low-loss substrate. A germanium quantum well is grown by molecular beam epitaxy (MBE) on a float zone silicon substrate with in situ deposited aluminum contacts. This combination allows the formation of an oxide-free superconductor-semiconductor interface. The deep mesa etch process is optimized to produce a sidewall taper sufficient for continuous metal deposition from the substrate to the top of the mesa for electrostatic gate electrodes and interconnects. The fabricated Josephson junctions demonstrate gate-tunable supercurrents with a maximum critical current over 100 nA and critical-current normal-resistance product of 8.63 μV. These results demonstrate a pathway toward improved integration of voltage-tunable superconducting circuit elements with quantum electronic building blocks such as couplers and qubits.

arXiv:2606.28585•Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena•Aug 7, 2026•0 citations
We present a superconductor-semiconductor materials system that is both scalable and monolithically integrated on a silicon substrate. It uses selective-area growth of Al\mathrm{Al}Al-InAs\mathrm{In}\mathrm{As}InAs hybrid structures on a planar III-V buffer layer, grown directly on a high-resistivity silicon substrate. We characterize the electrical properties of this materials system at millikelvin temperatures and observe a high average field-effect mobility of \ensuremathμ\ensuremath≈3200cm2/Vs\ensuremath{\mu}\ensuremath{\approx}3200\phantom{\rule{0.2em}{0ex}}{\mathrm{cm}}^{2}\mathrm{/Vs}\ensuremathμ\ensuremath≈3200cm2/Vs for the InAs\mathrm{In}\mathrm{As}InAs channel and a hard induced superconducting gap. Josephson junctions exhibit a high interface transmission, T\ensuremath≈0.75\mathcal{T}\ensuremath{\approx}0.75T\ensuremath≈0.75, a gate-voltage-tunable switching current with a product of critical current and normal state resistance, ICRN\ensuremath≈83\ensuremathμV{I}_{C}{R}_{N}\ensuremath{\approx}83\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{V}IC​RN​\ensuremath≈83\ensuremathμV, and signatures of multiple Andreev reflections. These results pave the way for scalable and high-coherence gate-voltage-tunable transmon devices and other superconductor-semiconductor hybrids fabricated directly on silicon.
We present a gate-voltage-tunable transmon qubit (gatemon) based on planar InAs\mathrm{In}\mathrm{As}InAs nanowires that are selectively grown on a high-resistivity silicon substrate using III-V buffer layers. We show that low-loss superconducting resonators with an internal quality of $2\ifmmode\times\else\texttimes\fi{}{10}^{5}$ can readily be realized using these substrates after the removal of buffer layers. We demonstrate coherent control and readout of a gatemon device with a relaxation time, ${T}_{1}\ensuremath{\approx}700\phantom{\rule{0.2em}{0ex}}\mathrm{ns}$, and dephasing times, ${T}_{2}^{\ensuremath{\ast}}\ensuremath{\approx}20\phantom{\rule{0.2em}{0ex}}\mathrm{ns}$ and ${T}_{2,\mathrm{echo}}\ensuremath{\approx}1.3\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{s}$. Further, we infer a high junction transparency of 0.40.40.4--0.90.90.9 from an analysis of the qubit anharmonicity.
The performance and coherence of superconducting quantum systems are fundamentally tied to the quality of the materials from which they are built. In superconducting transmon qubits, many loss mechanisms and sources of decoherence originate from material imperfections or unwanted oxide formation. Likewise, semiconductor–superconductor hybrid systems depend on high-quality interfaces to ensure strong coupling between electronic states in the two materials. In such hybrid devices, the accessible operating regime is often dictated by the intrinsic material properties of either the semiconductor or the superconductor. Advancing quantum device performance therefore requires exploring new material systems and optimizing their physical characteristics. In this thesis, we present the development of several superconducting material platforms for quantum technologies, including superconducting qubits, single-photon detectors, and semiconductor superconductor hybrid devices. We focus on the growth and characterization of superconducting films and heterostructures, and we establish clear connections between their material properties and the resulting device performance. First, we will present a novel semiconductor-superconductor hybrid material based on in-situ deposited epitaxial layers of Nb and Al on a shallow InAs quantum well. In this structure, the Al interlayer provides an epitaxial connection between an in-situ magnetron sputtered Nb or NbTi thin film and a shallow InAs two dimensional electron gas. This metal-to-metal epitaxy is achieved by optimization of the material stack and results in an induced superconducting gap of approximately 1 meV, determined from transport measurements of superconductor semiconductor Josephson junctions. This induced gap is approximately five times larger than the values reported for Al-based hybrid materials and indicates the formation of highly-transparent interfaces that are required in high-quality hybrid material platforms. Then, we discuss a different approach in the next chapter where we develop a hybrid material based on a molecular beam epitaxy grown InAsSb surface quantum well with an in-situ deposited Nb layer directly on top of the quantum well. Relative to conventional Al-InAs based systems, the InAsSb surface quantum well offers a lower effective mass and stronger spin-orbit interaction, while the Nb layer has a higher critical temperature and a larger critical magnetic field. The in-situ deposition of the Nb layer directly on top of the quantum well results in a high-quality interface that enables strong coupling to the InAsSb quantum well. Transport measurements on Josephson junctions reveal an induced superconducting gap of 1.3 meV and a critical current density of 3.75 × 10³A/cm². Furthermore, a planar asymmetric SQUID is realized, exhibiting gate-tunable superimposed oscillations originating from both the individual Josephson junction and the full SQUID loop. The large induced superconducting gap combined with strong spin-orbit interaction position this material as an attractive platform for experiments exploring gate-tunable superconductivity and topological superconducting devices. In the next chapter, we will focus on establishing a link between Nb film crystal properties and their performance in superconducting circuits. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over 10⁶ at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasi-particle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Then, we explore yet a different material platform by attempting to realize onchip NbTiN single photon detectors on LiNbO₃, an emerging photonic platform with high potential for scalable quantum information processing. We use DC reactive magnetron sputtering to grow high-quality NbTiN thin films and investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature (𝑇𝑐) of 12.3 K grown at a substrate temperature of 825 K. We demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LiNbO3 platform and investigate the obtained interface quality. Finally, we fabricate superconducting nanowire single photon detectors from the NbTiN film on LiNbO₃ and characterize the detector performance. Lastly, we report a gate-tunable Josephson diode effect in hybrid nanowire junctions consisting of a spin-orbit-coupled semiconductor core coated with epitaxial ferromagnetic insulator and superconductor shells. The wires display a hysteretic superconducting window as a function of axial magnetic field. In the superconducting regime, the devices exhibit nonreciprocal current transport, with the diode efficiency showing a strong dependence on back-gate voltage. The effect persists in a remanent magnetization state following a controlled demagnetization procedure, establishing zero-field operation. The combination of results presented in this thesis stress the importance of a material-focused approach in advancing the performance of quantum hardware. The novel hybrid material platforms developed in this thesis expand the operating regime of devices, which could enable future experiments involving gate-tunable superconductivity or topological properties. Similarly, we demonstrate that optimizing superconductor crystal structure benefits quantum devices, such as single-photon detectors and superconducting resonators.
Qubits on solid state devices could potentially provide the rapid control necessary for developing scalable quantum information processors. Materials innovation and design breakthroughs have increased functionality and coherence of qubits substantially over the past two decades. Here, we show by improving interface between InAs as a semiconductor and Al as a superconductor, one can reliably fabricate voltage-controlled Josephson junction field effect transistor (JJ-FET) that can be used as tunable qubits, resonators, and coupler switches. We find that bandgap engineering is crucial in realizing a two-dimensional electron gas near the surface. In addition, we show how the coupling between the semiconductor layer and the superconducting contacts can affect qubit properties. We present the anharmonicity and coupling strengths from one and two-photon absorption in a quantum two level system fabricated with a JJ-FET.
Superconductor-semiconductor hybrid materials have been extensively used for experiments on electrically tunable quantum devices. Notably, Josephson junctions utilizing nanowire weak links have enabled a number of new gate-tunable qubits, including gatemons, Andreev level qubits and spin qubits. Conversely, superconducting parametric amplifiers based on Josephson junctions have not yet been implemented using nanowires, even though such nearly quantum limited amplifiers are key elements in experiments on quantum circuits. Here we present Josephson parametric amplifiers based on arrays of parallel InAs nanowires that feature a large critical current as required for linear amplification. The resonance frequency of the devices is gate-tunable by almost 1 GHz, with a gain exceeding 20 dB in multiple frequencies and markedly improved noise performance compared to a low-temperature commercial amplifier. This platform enables on-chip integration of gate-tunable qubits with nearly quantum limited amplifiers using the same hybrid materials and on any substrate.
We propose superconducting-semiconducting (super-semi) qubit and coupler designs based on high-quality compact through-silicon vias (TSVs) to overcome challenges introduced by materials and processing required to fabricate high-quality super-semi Josephson junctions. In our designs, an interposer ``probe'' wafer containing TSVs is used to contact a sample wafer with, e.g., a superconductor-proximitized epitaxially grown germanium quantum well. By utilizing the capacitance of the probe-wafer TSVs, the majority of the electric field in the qubits is pulled away from lossy regions in the semiconducting wafer, such as the graded buffer layers sometimes required for epitaxial growth. Through simulations, we find that the probe wafer can reduce the electric field participation of the qubit in the sample wafer by an order of magnitude for thin substrates and remains small even when the epitaxial-layer thickness approaches $100\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{m}$. We also show how the qubit-coherence improvements achieved via this scheme are extensible to multiqubit systems that have tunable qubit-qubit couplings without magnetic fields. This approach additionally shrinks the on-chip footprint of voltage-tunable superconducting qubits while homogenizing critical wiring structures independent of semiconducting materials, which could aid in accelerating the understanding of super-semi heterostructures in a variety of systems.
Voltage-tunable Josephson junctions (VT-JJs) are an emerging element in superconducting quantum electronics with potential to expand the functionality of conventional designs. While VT-JJs are largely compatible with wafer-scale semiconductor processing, their integration into quantum circuits remains a challenge due to unmitigated semiconductor microwave loss. Here, a deep mesa etch process, wherein the epitaxial material is removed except the VT-JJ device, will facilitate the integration of VT-JJs with low-microwave-loss circuit elements by allowing these circuit elements to be placed directly on a low-loss substrate. A germanium quantum well is grown by molecular beam epitaxy (MBE) on a float zone silicon substrate with in situ deposited aluminum contacts. This combination allows the formation of an oxide-free superconductor-semiconductor interface. The deep mesa etch process is optimized to produce a sidewall taper sufficient for continuous metal deposition from the substrate to the top of the mesa for electrostatic gate electrodes and interconnects. The fabricated Josephson junctions demonstrate gate-tunable supercurrents with a maximum critical current over 100 nA and critical-current normal-resistance product of 8.63 μV. These results demonstrate a pathway toward improved integration of voltage-tunable superconducting circuit elements with quantum electronic building blocks such as couplers and qubits.