Superconductor-semiconductor hybrid materials have been extensively used for experiments on electrically tunable quantum devices. Notably, Josephson junctions utilizing nanowire weak links have enabled a number of new gate-tunable qubits, including gatemons, Andreev level qubits and spin qubits. Conversely, superconducting parametric amplifiers based on Josephson junctions have not yet been implemented using nanowires, even though such nearly quantum limited amplifiers are key elements in experiments on quantum circuits. Here we present Josephson parametric amplifiers based on arrays of parallel InAs nanowires that feature a large critical current as required for linear amplification. The resonance frequency of the devices is gate-tunable by almost 1 GHz, with a gain exceeding 20 dB in multiple frequencies and markedly improved noise performance compared to a low-temperature commercial amplifier. This platform enables on-chip integration of gate-tunable qubits with nearly quantum limited amplifiers using the same hybrid materials and on any substrate.
Superconductor-semiconductor hybrid materials have been extensively used for experiments on electrically tunable quantum devices. Notably, Josephson junctions utilizing nanowire weak links have enabled a number of new gate-tunable qubits, including gatemons, Andreev level qubits and spin qubits. Conversely, superconducting parametric amplifiers based on Josephson junctions have not yet been implemented using nanowires, even though such nearly quantum limited amplifiers are key elements in experiments on quantum circuits. Here we present Josephson parametric amplifiers based on arrays of parallel InAs nanowires that feature a large critical current as required for linear amplification. The resonance frequency of the devices is gate-tunable by almost 1 GHz, with a gain exceeding 20 dB in multiple frequencies and markedly improved noise performance compared to a low-temperature commercial amplifier. This platform enables on-chip integration of gate-tunable qubits with nearly quantum limited amplifiers using the same hybrid materials and on any substrate.
Near-quantum-limited amplifiers are essential building blocks for high-fidelity readout of superconducting qubits. Josephson parametric amplifiers (JPAs) have been developed to achieve this ultra-low-noise performance [1] in the last two decades by exploiting the quartic term in the nonlinear energy-phase relation of Al-AlO X superconductor-insulator-superconductor Josephson Junctions (SIS JJs). An ongoing research focus is to enhance JPAs’ compression power for processing readout signals in large-scale quantum processors. One approach is to optimize circuit designs to minimize parasitic higher-order nonlinear terms while preserving the quartic nonlinearity for the amplification process. An alternative approach is to make use of new types of JJ devices with small quartic nonlinearity such that parasitic nonlinearities are inherently even lower. Here, we demonstrate that superconductor-semiconductor-superconductor (SSmS) JJs, realized with Al-InAs heterostructures are a promising device to realize quantum-limited amplifiers for superconducting quantum computing. Al-InAs JJs have been used to realize qubits [2] , voltage-tunable resonators [3] , and parametric amplifiers [4] by exploiting critical current tunability via gate voltage ( Fig. 1(a–b) ). In this work, for the first time, we experimentally studied the nonlinear energy-phase relation of Al-InAs JJs and revealed their inherently low quartic nonlinearity. Next, we demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves greater than 20 dB of gain, 6 MHz of bandwidth and −119 dBm of compression power.
Josephson parametric amplifiers (JPAs) approaching quantum-limited noise performance have been instrumental in enabling high fidelity readout of superconducting qubits and, recently, semiconductor quantum dots (QDs). We propose that the quantum capacitance arising in electronic two-level systems (the dual of Josephson inductance) can provide an alternative dissipation-less non-linear element for parametric amplification. We experimentally demonstrate phase-sensitive parametric amplification using a QD-reservoir electron transition in a CMOS nanowire split-gate transistor embedded in a 1.8~GHz superconducting lumped-element microwave cavity, achieving parametric gains of -3 to +3 dB, limited by Sisyphus dissipation. Using a semi-classical model, we find an optimised design within current technological capabilities could achieve gains and bandwidths comparable to JPAs, while providing complementary specifications with respect to integration in semiconductor platforms or operation at higher magnetic fields.
Voltage-tunable superconductor-semiconductor devices offer a unique platform to realize dynamic tunability in superconducting quantum circuits. By galvanically connecting a gated InAs-Al Josephson junction to a coplanar waveguide resonator, we demonstrate the use of a superconducting element with wideband gate tunability. We show that the resonant frequency is controlled via a gate-tunable Josephson inductance and that the nonlinearity of the InAs-Al junction is nondissipative as is the case with conventional AlOx-Al junctions. As the gate voltage is decreased, the inductive participation of the junction increases up to $44\mathrm{%}$, resulting in the resonant frequency being tuned by over 2GHz. Utilizing the wide tunability of the device, we demonstrate that two resonant modes can be adjusted such that they strongly hybridize, exhibiting an avoided-level crossing with a coupling strength of 51MHz. Implementing such voltage-tunable resonators is the first step toward realizing wafer-scale continuous voltage control in superconducting circuits for qubit-qubit coupling, quantum limited amplifiers, and quantum memory platforms.
Superconducting microwave resonators and Josephson elements form the basis of a broad range of quantum information technologies, including circuit quantum electrodynamics, Josephson parametric amplification, bosonic quantum computing, and engineered interactions between microwave modes. The properties of these circuits are largely determined by material parameters and design geometry, while magnetic flux often provides a means of in situ control. Electrostatic gating offers an additional degree of freedom, motivating the investigation of gate-tunable superconducting circuits, particularly through the integration of superconductors with semiconductor elements.In this thesis, we investigate the gate tunability and nonlinear response of superconducting microwave resonators incorporating indium arsenide (InAs) nanowires with epitaxial aluminum (Al) shells. We explore two distinct forms of gate control in this platform: the modification of the superconducting properties of the Al shell and the electrostatic tuning of Andreev bound states (ABSs) in Josephson weak links defined in the InAs core.We characterize the first form of gate control by measuring the gate-induced changes in resonator frequency and internal losses. We demonstrate that the observed response is well described by the Mattis--Bardeen model using an effective-temperature approach, consistent with an increase in quasiparticle population. Time-domain and modulation measurements further reveal characteristic response times down to a few tens of nanoseconds, highlighting the potential of this mechanism for applications in cryogenic switching and superconducting electronics.We then investigate the ABS--resonator interaction in both the linear and nonlinear regimes, demonstrating coupling strengths approaching the ultrastrong-coupling regime and, most notably, gate and flux control over the ABS-induced Kerr and cubic nonlinearities. In particular, we show that the Kerr contribution can be tuned through zero while maintaining a finite cubic nonlinearity, and observe three-wave-mixing parametric amplification. These findings are particularly relevant for applications requiring three-wave mixing with suppressed Kerr effects, such as Josephson parametric amplification.Together, these results demonstrate the potential of hybrid superconductor--semiconductor devices for engineering gate-tunable microwave circuits and controlling their linear and nonlinear response.
Josephson parametric amplifiers (JPAs) approaching quantum-limited noise performance have been instrumental in enabling high fidelity readout of superconducting qubits and, recently, semiconductor quantum dots (QDs). We propose that the quantum capacitance arising in electronic two-level systems (the dual of Josephson inductance) can provide an alternative dissipationless nonlinear element for parametric amplification. We experimentally demonstrate phase-sensitive parametric amplification using a QD-reservoir electron transition in a CMOS nanowire split-gate transistor embedded in a 1.8 GHz superconducting lumped-element microwave cavity, achieving parametric gains of -3 to +3 dB, limited by Sisyphus dissipation. Using a semiclassical model, we find an optimized design within current technological capabilities could achieve gains and bandwidths comparable to JPAs, while providing complementary specifications with respect to integration in semiconductor platforms or operation at higher magnetic fields.
We introduce a near-quantum-limited amplifier with a large tunable bandwidth and high dynamic range---the Josephson array-mode parametric amplifier (JAMPA). The signal and idler modes involved in the amplification process are realized by the array modes of a chain of 1000 flux-tunable Josephson-junction-based nonlinear elements. The frequency spacing between the array modes is comparable to the flux tunability of the modes, ensuring that any desired frequency can be occupied by a resonant mode, which can further be pumped to produce high gain. We experimentally demonstrate that the device can be operated as a nearly quantum-limited parametric amplifier with 20 dB of gain at almost any frequency within a 4--12-GHz band. On average, it has a 3-dB bandwidth of 11 MHz and an input 1-dB compression power of $\ensuremath{-}108\phantom{\rule{0.2em}{0ex}}\mathrm{dBm}$, which can go as high as $\ensuremath{-}93\phantom{\rule{0.2em}{0ex}}\mathrm{dBm}$. We envision the application of such a device to the time- and frequency-multiplexed readout of multiple qubits, as well as to the generation of continuous-variable cluster states.