Qubits on solid state devices could potentially provide the rapid control necessary for developing scalable quantum information processors. Materials innovation and design breakthroughs have increased functionality and coherence of qubits substantially over the past two decades. Here, we show by improving interface between InAs as a semiconductor and Al as a superconductor, one can reliably fabricate voltage-controlled Josephson junction field effect transistor (JJ-FET) that can be used as tunable qubits, resonators, and coupler switches. We find that bandgap engineering is crucial in realizing a two-dimensional electron gas near the surface. In addition, we show how the coupling between the semiconductor layer and the superconducting contacts can affect qubit properties. We present the anharmonicity and coupling strengths from one and two-photon absorption in a quantum two level system fabricated with a JJ-FET.
Qubits on solid state devices could potentially provide the rapid control necessary for developing scalable quantum information processors. Materials innovation and design breakthroughs have increased functionality and coherence of qubits substantially over the past two decades. Here, we show by improving interface between InAs as a semiconductor and Al as a superconductor, one can reliably fabricate voltage-controlled Josephson junction field effect transistor (JJ-FET) that can be used as tunable qubits, resonators, and coupler switches. We find that bandgap engineering is crucial in realizing a two-dimensional electron gas near the surface. In addition, we show how the coupling between the semiconductor layer and the superconducting contacts can affect qubit properties. We present the anharmonicity and coupling strengths from one and two-photon absorption in a quantum two level system fabricated with a JJ-FET.
The performance and coherence of superconducting quantum systems are fundamentally tied to the quality of the materials from which they are built. In superconducting transmon qubits, many loss mechanisms and sources of decoherence originate from material imperfections or unwanted oxide formation. Likewise, semiconductor–superconductor hybrid systems depend on high-quality interfaces to ensure strong coupling between electronic states in the two materials. In such hybrid devices, the accessible operating regime is often dictated by the intrinsic material properties of either the semiconductor or the superconductor. Advancing quantum device performance therefore requires exploring new material systems and optimizing their physical characteristics. In this thesis, we present the development of several superconducting material platforms for quantum technologies, including superconducting qubits, single-photon detectors, and semiconductor superconductor hybrid devices. We focus on the growth and characterization of superconducting films and heterostructures, and we establish clear connections between their material properties and the resulting device performance. First, we will present a novel semiconductor-superconductor hybrid material based on in-situ deposited epitaxial layers of Nb and Al on a shallow InAs quantum well. In this structure, the Al interlayer provides an epitaxial connection between an in-situ magnetron sputtered Nb or NbTi thin film and a shallow InAs two dimensional electron gas. This metal-to-metal epitaxy is achieved by optimization of the material stack and results in an induced superconducting gap of approximately 1 meV, determined from transport measurements of superconductor semiconductor Josephson junctions. This induced gap is approximately five times larger than the values reported for Al-based hybrid materials and indicates the formation of highly-transparent interfaces that are required in high-quality hybrid material platforms. Then, we discuss a different approach in the next chapter where we develop a hybrid material based on a molecular beam epitaxy grown InAsSb surface quantum well with an in-situ deposited Nb layer directly on top of the quantum well. Relative to conventional Al-InAs based systems, the InAsSb surface quantum well offers a lower effective mass and stronger spin-orbit interaction, while the Nb layer has a higher critical temperature and a larger critical magnetic field. The in-situ deposition of the Nb layer directly on top of the quantum well results in a high-quality interface that enables strong coupling to the InAsSb quantum well. Transport measurements on Josephson junctions reveal an induced superconducting gap of 1.3 meV and a critical current density of 3.75 × 10³A/cm². Furthermore, a planar asymmetric SQUID is realized, exhibiting gate-tunable superimposed oscillations originating from both the individual Josephson junction and the full SQUID loop. The large induced superconducting gap combined with strong spin-orbit interaction position this material as an attractive platform for experiments exploring gate-tunable superconductivity and topological superconducting devices. In the next chapter, we will focus on establishing a link between Nb film crystal properties and their performance in superconducting circuits. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over 10⁶ at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasi-particle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Then, we explore yet a different material platform by attempting to realize onchip NbTiN single photon detectors on LiNbO₃, an emerging photonic platform with high potential for scalable quantum information processing. We use DC reactive magnetron sputtering to grow high-quality NbTiN thin films and investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature (𝑇𝑐) of 12.3 K grown at a substrate temperature of 825 K. We demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LiNbO3 platform and investigate the obtained interface quality. Finally, we fabricate superconducting nanowire single photon detectors from the NbTiN film on LiNbO₃ and characterize the detector performance. Lastly, we report a gate-tunable Josephson diode effect in hybrid nanowire junctions consisting of a spin-orbit-coupled semiconductor core coated with epitaxial ferromagnetic insulator and superconductor shells. The wires display a hysteretic superconducting window as a function of axial magnetic field. In the superconducting regime, the devices exhibit nonreciprocal current transport, with the diode efficiency showing a strong dependence on back-gate voltage. The effect persists in a remanent magnetization state following a controlled demagnetization procedure, establishing zero-field operation. The combination of results presented in this thesis stress the importance of a material-focused approach in advancing the performance of quantum hardware. The novel hybrid material platforms developed in this thesis expand the operating regime of devices, which could enable future experiments involving gate-tunable superconductivity or topological properties. Similarly, we demonstrate that optimizing superconductor crystal structure benefits quantum devices, such as single-photon detectors and superconducting resonators.
Voltage-tunable superconductor-semiconductor devices offer a unique platform to realize dynamic tunability in superconducting quantum circuits. By galvanically connecting a gated InAs-Al Josephson junction to a coplanar waveguide resonator, we demonstrate the use of a superconducting element with wideband gate tunability. We show that the resonant frequency is controlled via a gate-tunable Josephson inductance and that the nonlinearity of the InAs-Al junction is nondissipative as is the case with conventional AlOx-Al junctions. As the gate voltage is decreased, the inductive participation of the junction increases up to $44\mathrm{%}$, resulting in the resonant frequency being tuned by over 2GHz. Utilizing the wide tunability of the device, we demonstrate that two resonant modes can be adjusted such that they strongly hybridize, exhibiting an avoided-level crossing with a coupling strength of 51MHz. Implementing such voltage-tunable resonators is the first step toward realizing wafer-scale continuous voltage control in superconducting circuits for qubit-qubit coupling, quantum limited amplifiers, and quantum memory platforms.
In computing architectures, one important factor is the tradeoff between the need to couple bits of information (quantum or classical) to each other and to an external drive and the need to isolate them well enough in order to protect the information for an extended period of time. In the case of superconducting quantum circuits, one approach is to utilize fixed frequency qubits coupled to coplanar waveguide (CPW) resonators such that the system can be kept in a configuration that is relatively insensitive to noise. Here, we propose a scalable voltage-tunable quantum memory design concept compatible with superconducting qubit platforms. Our design builds on the recent progress in fabrication of Josephson field effect transistors (JJ-FETs) which, use indium arsenide (InAs) quantum wells. The JJ-FET is incorporated into a tunable coupler between a transmission line and a high-quality resonator in order to control the overall inductance of the coupler. A full isolation of the high-quality resonator can be achieved by turning off the JJ-FET. This could allow for long coherence times and protection of the quantum information inside the storage cavity. The proposed design would facilitate the implementation of random access memory for storage of quantum information in between computational gate operations.
Voltage-tunable Josephson junctions (VT-JJs) are an emerging element in superconducting quantum electronics with potential to expand the functionality of conventional designs. While VT-JJs are largely compatible with wafer-scale semiconductor processing, their integration into quantum circuits remains a challenge due to unmitigated semiconductor microwave loss. Here, a deep mesa etch process, wherein the epitaxial material is removed except the VT-JJ device, will facilitate the integration of VT-JJs with low-microwave-loss circuit elements by allowing these circuit elements to be placed directly on a low-loss substrate. A germanium quantum well is grown by molecular beam epitaxy (MBE) on a float zone silicon substrate with in situ deposited aluminum contacts. This combination allows the formation of an oxide-free superconductor-semiconductor interface. The deep mesa etch process is optimized to produce a sidewall taper sufficient for continuous metal deposition from the substrate to the top of the mesa for electrostatic gate electrodes and interconnects. The fabricated Josephson junctions demonstrate gate-tunable supercurrents with a maximum critical current over 100 nA and critical-current normal-resistance product of 8.63 μV. These results demonstrate a pathway toward improved integration of voltage-tunable superconducting circuit elements with quantum electronic building blocks such as couplers and qubits.
Hybrid semiconductor-superconductor qubits have recently emerged as a promising alternative to traditional platforms, combining material advantages with device-level tunability. A defining feature is their gate-tunable Josephson coupling, enabling superconducting qubit architectures with full electric-field control and offering a path toward scalable, low-crosstalk quantum processors. This approach seeks to merge benefits of superconducting and semiconductor qubits, for instance by encoding quantum information in the spin of a quasiparticle occupying an Andreev bound state, thus combining long coherence times with fast, flexible control. Progress has accelerated through bottom-up engineering of Andreev states in coupled quantum dot arrays, leading to architectures such as minimal Kitaev chains hosting Majorana zero modes. In parallel, Hamiltonian-protected designs aim to enhance resilience against local noise and decoherence by exploiting superconducting phase dynamics and discrete charge or flux degrees of freedom. This article reviews recent theoretical and experimental advances in hybrid qubits, providing an overview of physical mechanisms, device implementations, and emerging architectures, with emphasis on their potential for (topologically) protected quantum information processing. While many designs remain at proof-of-concept stage, rapid progress suggests practical demonstrations may soon be achievable.
Abstract Superconducting circuits based on hybrid InAs Josephson Junctions (JJs) play a starring role in the design of fast and ultra‐low power consumption solid‐state quantum electronics and exploring novel physical phenomena. Conventionally, 3D substrates, 2D quantum wells (QWs), and 1D nanowires (NWs) made of InAs are employed to create superconducting circuits with hybrid JJs. Each platform has its advantages and disadvantages. Here, the InAs‐on‐insulator (InAsOI) is proposed as a groundbreaking platform for developing superconducting electronics. An epilayer of semiconducting InAs with different electron densities is grown onto an InAlAs metamorphic buffer, efficiently used as a cryogenic insulator to decouple adjacent devices electrically. JJs with various lengths and widths are fabricated employing Al as a superconductor and InAs with different electron densities. A switching current density of 7.3 µA µm−1, a critical voltage of 50‐to‐80 µV, and a critical temperature equal to that of the superconductor used are achieved. For all the JJs, the switching current follows a Fraunhofer‐like pattern with the out‐of‐plane magnetic field. These achievements enable the use of InAsOI to design and fabricate surface‐exposed Josephson Field Effect Transistors with high critical current densities and superior gating properties.