Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2010.06811 · Optics Letters

Proposal for noise-free visible-telecom quantum frequency conversion through third-order sum and difference frequency generation

Xiyuan Lu, Gregory T. Moille, Ashutosh Rao, Kartik A. Srinivasan

Published Dec 7, 2020• 11 citations
arXivHTMLPDF

Abstract

Quantum frequency conversion (QFC) between the visible and telecom is a key to connect quantum memories in fiber-based quantum networks. Current methods for linking such widely separated frequencies, such as sum/difference frequency generation and four-wave mixing Bragg scattering, are prone to broadband noise generated by the pump laser(s). To address this issue, we propose to use third-order sum/difference frequency generation (TSFG/TDFG) for an upconversion/downconversion QFC interface. In this process, two long wavelength pump photons combine their energy and momentum to mediate frequency conversion across the large spectral gap between the visible and telecom bands, which is particularly beneficial from the noise perspective. We show that waveguide-coupled silicon nitride microring resonators can be designed for efficient QFC between 606 and 1550 nm via a 1990 nm pump through TSFG/TDFG. We simulate the device dispersion and coupling, and from the simulated parameters, estimate that the frequency conversion can be efficient (${\gt}80 \%$) at 50 mW pump power. Our results suggest that microresonator TSFG/TDFG is promising for compact, scalable, and low-power QFC across large spectral gaps.

DOI
10.1364/ol.412602

Related papers

A chip-scale, telecommunications-band frequency conversion interface for quantum emitters

Imad H. Agha, Serkan Ateş, Marcelo Davanço +1 more

We describe a chip-scale, telecommunications-band frequency conversion interface designed for low-noise operation at wavelengths desirable for common single photon emitters. Four-wave-mixing Bragg scattering in silicon nitride waveguides is used to demonstrate frequency upconversion and downconversion between the 980 nm and 1550 nm wavelength regions, with signal-to-background levels > 10 and conversion efficiency of ≈ -60 dB at low continuous wave input pump powers (< 50 mW). Finite element simulations and the split-step Fourier method indicate that increased input powers of ≈ 10 W (produced by amplified nanosecond pulses, for example) will result in a conversion efficiency > 25 % in existing geometries. Finally, we present waveguide designs that can be used to connect shorter wavelength (637 nm to 852 nm) quantum emitters with 1550 nm.

arXiv:1304.5754•Optics Express•Sep 6, 2013•41 citations

Efficient quantum frequency conversion for networking on the telecom E-band

S. M. Patomäki, Maxim A. Sirotin, Dirk Robert Englund +1 more

High-efficiency quantum frequency conversion (QFC) for group-IV color centers, such as silicon vacancies (SiV), is required for long-distance quantum networking protocols. Performance of QFC depends on the choices of network and pump wavelengths and the choice between bulk crystal and waveguide, since these directly determine the dominant noise processes. These furthermore lead to fiber-based or free-space, single- or multi-pass setups with different complexities, power requirements, losses, and hence, external efficiencies. Here, we present a QFC device design for SiV QFC with simultaneous state-of-the-art performance and simple setup. Namely, by choosing the C-band pump wavelength of λ p = 1561 nm, which leads to an E-band network wavelength of λ n = 1398 nm, we remain in the anti-Stokes noise regime in a one-stage, single-pass conversion scheme. The high-quality erbium-doped fiber amplifiers in this band aid in maximizing the internal nonlinear process. We measure an external (internal) photon conversion efficiency of 44.5 ± 1.8 % (8.5 ± 1.8 %) at an external (internal) pump power of 1.51 W (0.97 W), limited by fiber coupling efficiencies. This is an increase in efficiency by 9 % (25 %) compared to prior demonstrations for SiV QFC, which were limited by factors such as internal device efficiencies, limited available pump power, and losses. We measure a pump-generated noise spectral density of 4913 counts/s/nm, which can be attributed to the anti-Stokes Raman scattering, in line with other one-stage demonstrations, though higher by an order of magnitude than that obtained in two-stage conversion. Without extra filtering, we expect this to lead to a networking photon signal-to-noise ratio of above 7000 for cavity-integrated SiVs in emission-based schemes.

Optics Express•Feb 2, 2026•0 citations

Spectral noise in frequency conversion from the visible to the telecommunication C-band

Peter C. Strassmann, Anthony Martin, Nicolas Gisin +1 more

We report a detailed study of the noise properties of a visible-to-telecom photon frequency converter based on difference frequency generation (DFG). The device converts 580 nm photons to 1541 nm using a strong pump laser at 930 nm, in a periodically poled lithium niobate ridge waveguide. The converter reaches a maximum device efficiency of 46 % (internal efficiency of 67%) at a pump power of 250 mW. The noise produced by the pump laser is investigated in detail by recording the noise spectra both in the telecom and visible regimes and measuring the power dependence of the noise rates. The noise spectrum in the telecom is very broadband, as expected from previous work on similar DFG converters. However, we also observe several narrow dips in the telecom spectrum, with corresponding peaks appearing in the 580 nm noise spectrum. These features are explained by sum frequency generation of the telecom noise at wavelengths given by the phase-matching condition of different spatial modes in the waveguide. The proposed noise model is in good agreement with all the measured data, including the power dependence of the noise rates, both in the visible and telecom regimes. These results are applicable to the class of DFG converters where the pump laser wavelength is in between the input and target wavelength.

arXiv:1902.02728•Optics Express•May 2, 2019•28 citations

High-Performance Quantum Frequency Conversion from Ultraviolet to Telecom Band

Yi Yang, Bin Wang, Ji-Chao Lin +10 more

Quantum frequency conversion (QFC) is essential for bridging the spectral gap between stationary qubits and low-loss optical communication channels. In this work, we demonstrate a short-wavelength-pumping QFC with the first-order quasi-phase matching period of 3.07 um on thin-film lithium niobate, converting ultraviolet photons to the telecom C-band. By constructing a theoretical model that correlates the normalized conversion efficiency with domain defects in the short-period phase-matched waveguide, we found the critical tolerance of domain defects along the waveguide should be $\le 2$ (excluding the ends). Based on this, we achieved a theoretical limit normalized conversion efficiency of 839%/(W*cm^2) for the fundamental guided mode through fabrication optimization. Furthermore, we propose a robust noise suppression strategy for short-wavelength pumping by utilizing the counter-tuning behaviors of difference-frequency generation and spontaneous parametric down-conversion. By combining these advances with ultra-narrowband filtering, we achieve a record-high external efficiency of 28.8% and an ultra-low noise of 35 counts per second. This high-performance QFC connecting ultraviolet and telecom bands satisfies the stringent requirements for long-lived remote ion-ion entanglement in scalable quantum networks [W.-Z. Liu et al., Nature (2026)].

quant-pharXiv:2603.01745•Physical Review Letters•Mar 3, 2026•3 citations

Efficient bidirectional quantum frequency conversion between telecom and visible bands using adaptively phase-matched III-V nanophotonic waveguides

Jierui Hu, Hao Yuan, Joshua Akin +3 more

Quantum frequency conversion (QFC) is essential for interfacing quantum systems operating at different wavelengths and for realizing scalable quantum networks. Despite extensive progress, achieving QFC with simultaneous high efficiency, low pump power, minimal noise, broad bandwidth, and pump-wavelength flexibility remains challenging. Here, we demonstrate efficient, low-noise, and bidirectional QFC between the telecom (1550-nm) and visible (780-nm) bands using unpoled indium gallium phosphide (InGaP) χ(2) nanophotonic waveguides, eliminating the need for a long-wavelength pump. Leveraging the large nonlinear susceptibility of InGaP together with adaptive phase-matching control, we obtain 27% (55%) internal efficiency in a 6-mm (2.5-mm)-long waveguide with a low pump power of 20 mW (50 mW) and a noise flux spectral density of 10−4 counts per second per hertz at signal–pump detuning of 20 nm. These results mark a significant advance in integrated nonlinear photonics for high-performance QFC, facilitating the development of versatile and scalable quantum networks. Future quantum networks need low-noise frequency conversion. This work tackles pump-noise and phase-matching limits by using adaptively phase-matched InGaP χ(2) nanowaveguides to efficiently convert telecom and 780 nm light while preserving quantum characteristics.

arXiv:2510.16696•Nature Communications•Apr 8, 2026•4 citations

Fiber-integrated Quantum Frequency Conversion for Long-distance Quantum Networking

Zhichuan Liao, Ao Shen, Lai Zhou +2 more

Signal photons emitted by quantum nodes typically fall outside the low-loss telecom window of optical fibers, leading to severe transmission losses. Quantum frequency conversion (QFC) offers an effective optical interface that bridges quantum nodes with telecom-band channels, enabling long-distance quantum communication. In this work, we demonstrate a compact, fiber-integrated QFC system with low noise and a high signal-to-noise ratio (SNR). Using a periodically poled lithium niobate (PPLN) waveguide, input photons at 637.2 nm are down-converted to telecom photons at 1588.3 nm. Our system achieves a total conversion efficiency of approximately 9%, with pump-induced noise suppressed to 154 Hz. For input photon rates of 32.7, 118.0, and 327.7 kHz, the corresponding SNRs are 12.3, 43.9, and 117.8, respectively. We further develop a theoretical model to simulate the entanglement fidelity between nitrogen-vacancy (NV) center spins and the frequency-converted telecom photons. At the emission rate of an NV center, our QFC system maintains an expected fidelity exceeding 52% over a transmission distance of 100 km. These findings highlight the potential of our QFC system for scalable, long-distance quantum networking.

quant-pharXiv:2604.23444•npj Quantum Information•Apr 28, 2026•0 citations
Quantum frequency conversion (QFC) between the visible and telecom is a key to connect quantum memories in fiber-based quantum networks. Current methods for linking such widely separated frequencies, such as sum/difference frequency generation and four-wave mixing Bragg scattering, are prone to broadband noise generated by the pump laser(s). To address this issue, we propose to use third-order sum/difference frequency generation (TSFG/TDFG) for an upconversion/downconversion QFC interface. In this process, two long wavelength pump photons combine their energy and momentum to mediate frequency conversion across the large spectral gap between the visible and telecom bands, which is particularly beneficial from the noise perspective. We show that waveguide-coupled silicon nitride microring resonators can be designed for efficient QFC between 606 and 1550 nm via a 1990 nm pump through TSFG/TDFG. We simulate the device dispersion and coupling, and from the simulated parameters, estimate that the frequency conversion can be efficient (>80%{\gt}80 \%>80%) at 50 mW pump power. Our results suggest that microresonator TSFG/TDFG is promising for compact, scalable, and low-power QFC across large spectral gaps.
We describe a chip-scale, telecommunications-band frequency conversion interface designed for low-noise operation at wavelengths desirable for common single photon emitters. Four-wave-mixing Bragg scattering in silicon nitride waveguides is used to demonstrate frequency upconversion and downconversion between the 980 nm and 1550 nm wavelength regions, with signal-to-background levels > 10 and conversion efficiency of ≈ -60 dB at low continuous wave input pump powers (< 50 mW). Finite element simulations and the split-step Fourier method indicate that increased input powers of ≈ 10 W (produced by amplified nanosecond pulses, for example) will result in a conversion efficiency > 25 % in existing geometries. Finally, we present waveguide designs that can be used to connect shorter wavelength (637 nm to 852 nm) quantum emitters with 1550 nm.
High-efficiency quantum frequency conversion (QFC) for group-IV color centers, such as silicon vacancies (SiV), is required for long-distance quantum networking protocols. Performance of QFC depends on the choices of network and pump wavelengths and the choice between bulk crystal and waveguide, since these directly determine the dominant noise processes. These furthermore lead to fiber-based or free-space, single- or multi-pass setups with different complexities, power requirements, losses, and hence, external efficiencies. Here, we present a QFC device design for SiV QFC with simultaneous state-of-the-art performance and simple setup. Namely, by choosing the C-band pump wavelength of λ p = 1561 nm, which leads to an E-band network wavelength of λ n = 1398 nm, we remain in the anti-Stokes noise regime in a one-stage, single-pass conversion scheme. The high-quality erbium-doped fiber amplifiers in this band aid in maximizing the internal nonlinear process. We measure an external (internal) photon conversion efficiency of 44.5 ± 1.8 % (8.5 ± 1.8 %) at an external (internal) pump power of 1.51 W (0.97 W), limited by fiber coupling efficiencies. This is an increase in efficiency by 9 % (25 %) compared to prior demonstrations for SiV QFC, which were limited by factors such as internal device efficiencies, limited available pump power, and losses. We measure a pump-generated noise spectral density of 4913 counts/s/nm, which can be attributed to the anti-Stokes Raman scattering, in line with other one-stage demonstrations, though higher by an order of magnitude than that obtained in two-stage conversion. Without extra filtering, we expect this to lead to a networking photon signal-to-noise ratio of above 7000 for cavity-integrated SiVs in emission-based schemes.
We report a detailed study of the noise properties of a visible-to-telecom photon frequency converter based on difference frequency generation (DFG). The device converts 580 nm photons to 1541 nm using a strong pump laser at 930 nm, in a periodically poled lithium niobate ridge waveguide. The converter reaches a maximum device efficiency of 46 % (internal efficiency of 67%) at a pump power of 250 mW. The noise produced by the pump laser is investigated in detail by recording the noise spectra both in the telecom and visible regimes and measuring the power dependence of the noise rates. The noise spectrum in the telecom is very broadband, as expected from previous work on similar DFG converters. However, we also observe several narrow dips in the telecom spectrum, with corresponding peaks appearing in the 580 nm noise spectrum. These features are explained by sum frequency generation of the telecom noise at wavelengths given by the phase-matching condition of different spatial modes in the waveguide. The proposed noise model is in good agreement with all the measured data, including the power dependence of the noise rates, both in the visible and telecom regimes. These results are applicable to the class of DFG converters where the pump laser wavelength is in between the input and target wavelength.
Quantum frequency conversion (QFC) is essential for bridging the spectral gap between stationary qubits and low-loss optical communication channels. In this work, we demonstrate a short-wavelength-pumping QFC with the first-order quasi-phase matching period of 3.07 um on thin-film lithium niobate, converting ultraviolet photons to the telecom C-band. By constructing a theoretical model that correlates the normalized conversion efficiency with domain defects in the short-period phase-matched waveguide, we found the critical tolerance of domain defects along the waveguide should be ≤2\le 2≤2 (excluding the ends). Based on this, we achieved a theoretical limit normalized conversion efficiency of 839%/(W*cm^2) for the fundamental guided mode through fabrication optimization. Furthermore, we propose a robust noise suppression strategy for short-wavelength pumping by utilizing the counter-tuning behaviors of difference-frequency generation and spontaneous parametric down-conversion. By combining these advances with ultra-narrowband filtering, we achieve a record-high external efficiency of 28.8% and an ultra-low noise of 35 counts per second. This high-performance QFC connecting ultraviolet and telecom bands satisfies the stringent requirements for long-lived remote ion-ion entanglement in scalable quantum networks [W.-Z. Liu et al., Nature (2026)].
Quantum frequency conversion (QFC) is essential for interfacing quantum systems operating at different wavelengths and for realizing scalable quantum networks. Despite extensive progress, achieving QFC with simultaneous high efficiency, low pump power, minimal noise, broad bandwidth, and pump-wavelength flexibility remains challenging. Here, we demonstrate efficient, low-noise, and bidirectional QFC between the telecom (1550-nm) and visible (780-nm) bands using unpoled indium gallium phosphide (InGaP) χ(2) nanophotonic waveguides, eliminating the need for a long-wavelength pump. Leveraging the large nonlinear susceptibility of InGaP together with adaptive phase-matching control, we obtain 27% (55%) internal efficiency in a 6-mm (2.5-mm)-long waveguide with a low pump power of 20 mW (50 mW) and a noise flux spectral density of 10−4 counts per second per hertz at signal–pump detuning of 20 nm. These results mark a significant advance in integrated nonlinear photonics for high-performance QFC, facilitating the development of versatile and scalable quantum networks. Future quantum networks need low-noise frequency conversion. This work tackles pump-noise and phase-matching limits by using adaptively phase-matched InGaP χ(2) nanowaveguides to efficiently convert telecom and 780 nm light while preserving quantum characteristics.
Signal photons emitted by quantum nodes typically fall outside the low-loss telecom window of optical fibers, leading to severe transmission losses. Quantum frequency conversion (QFC) offers an effective optical interface that bridges quantum nodes with telecom-band channels, enabling long-distance quantum communication. In this work, we demonstrate a compact, fiber-integrated QFC system with low noise and a high signal-to-noise ratio (SNR). Using a periodically poled lithium niobate (PPLN) waveguide, input photons at 637.2 nm are down-converted to telecom photons at 1588.3 nm. Our system achieves a total conversion efficiency of approximately 9%, with pump-induced noise suppressed to 154 Hz. For input photon rates of 32.7, 118.0, and 327.7 kHz, the corresponding SNRs are 12.3, 43.9, and 117.8, respectively. We further develop a theoretical model to simulate the entanglement fidelity between nitrogen-vacancy (NV) center spins and the frequency-converted telecom photons. At the emission rate of an NV center, our QFC system maintains an expected fidelity exceeding 52% over a transmission distance of 100 km. These findings highlight the potential of our QFC system for scalable, long-distance quantum networking.