Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2510.16696 · Nature Communications

Efficient bidirectional quantum frequency conversion between telecom and visible bands using adaptively phase-matched III-V nanophotonic waveguides

Jierui Hu, Hao Yuan, Joshua Akin, A. K. M. Naziul Haque, Yunlei Zhao, Kejie Fang

Published Apr 8, 2026• 4 citations
arXivHTMLPDF

Abstract

Quantum frequency conversion (QFC) is essential for interfacing quantum systems operating at different wavelengths and for realizing scalable quantum networks. Despite extensive progress, achieving QFC with simultaneous high efficiency, low pump power, minimal noise, broad bandwidth, and pump-wavelength flexibility remains challenging. Here, we demonstrate efficient, low-noise, and bidirectional QFC between the telecom (1550-nm) and visible (780-nm) bands using unpoled indium gallium phosphide (InGaP) χ(2) nanophotonic waveguides, eliminating the need for a long-wavelength pump. Leveraging the large nonlinear susceptibility of InGaP together with adaptive phase-matching control, we obtain 27% (55%) internal efficiency in a 6-mm (2.5-mm)-long waveguide with a low pump power of 20 mW (50 mW) and a noise flux spectral density of 10−4 counts per second per hertz at signal–pump detuning of 20 nm. These results mark a significant advance in integrated nonlinear photonics for high-performance QFC, facilitating the development of versatile and scalable quantum networks. Future quantum networks need low-noise frequency conversion. This work tackles pump-noise and phase-matching limits by using adaptively phase-matched InGaP χ(2) nanowaveguides to efficiently convert telecom and 780 nm light while preserving quantum characteristics.

DOI
10.1038/s41467-026-71688-2

Related papers

Efficient bidirectional quantum frequency conversion between telecom and visible bands using programmable III-V nanophotonic waveguides

Jierui Hu, Hao Yuan, Joshua Akin +3 more

We report efficient, bidirectional and low-noise quantum frequency conversion between telecom (1550-nm) and visible (780-nm) bands on programmable unpoled χ ( 2 ) indium gallium phosphide (InGaP) integrated waveguides.

Conference on Lasers and Electro-Optics•Jan 1, 2026•0 citations

High-Performance Quantum Frequency Conversion from Ultraviolet to Telecom Band

Yi Yang, Bin Wang, Ji-Chao Lin +10 more

Quantum frequency conversion (QFC) is essential for bridging the spectral gap between stationary qubits and low-loss optical communication channels. In this work, we demonstrate a short-wavelength-pumping QFC with the first-order quasi-phase matching period of 3.07 um on thin-film lithium niobate, converting ultraviolet photons to the telecom C-band. By constructing a theoretical model that correlates the normalized conversion efficiency with domain defects in the short-period phase-matched waveguide, we found the critical tolerance of domain defects along the waveguide should be $\le 2$ (excluding the ends). Based on this, we achieved a theoretical limit normalized conversion efficiency of 839%/(W*cm^2) for the fundamental guided mode through fabrication optimization. Furthermore, we propose a robust noise suppression strategy for short-wavelength pumping by utilizing the counter-tuning behaviors of difference-frequency generation and spontaneous parametric down-conversion. By combining these advances with ultra-narrowband filtering, we achieve a record-high external efficiency of 28.8% and an ultra-low noise of 35 counts per second. This high-performance QFC connecting ultraviolet and telecom bands satisfies the stringent requirements for long-lived remote ion-ion entanglement in scalable quantum networks [W.-Z. Liu et al., Nature (2026)].

quant-pharXiv:2603.01745•Physical Review Letters•Mar 3, 2026•3 citations

Efficient quantum frequency conversion for networking on the telecom E-band

S. M. Patomäki, Maxim A. Sirotin, Dirk Robert Englund +1 more

High-efficiency quantum frequency conversion (QFC) for group-IV color centers, such as silicon vacancies (SiV), is required for long-distance quantum networking protocols. Performance of QFC depends on the choices of network and pump wavelengths and the choice between bulk crystal and waveguide, since these directly determine the dominant noise processes. These furthermore lead to fiber-based or free-space, single- or multi-pass setups with different complexities, power requirements, losses, and hence, external efficiencies. Here, we present a QFC device design for SiV QFC with simultaneous state-of-the-art performance and simple setup. Namely, by choosing the C-band pump wavelength of λ p = 1561 nm, which leads to an E-band network wavelength of λ n = 1398 nm, we remain in the anti-Stokes noise regime in a one-stage, single-pass conversion scheme. The high-quality erbium-doped fiber amplifiers in this band aid in maximizing the internal nonlinear process. We measure an external (internal) photon conversion efficiency of 44.5 ± 1.8 % (8.5 ± 1.8 %) at an external (internal) pump power of 1.51 W (0.97 W), limited by fiber coupling efficiencies. This is an increase in efficiency by 9 % (25 %) compared to prior demonstrations for SiV QFC, which were limited by factors such as internal device efficiencies, limited available pump power, and losses. We measure a pump-generated noise spectral density of 4913 counts/s/nm, which can be attributed to the anti-Stokes Raman scattering, in line with other one-stage demonstrations, though higher by an order of magnitude than that obtained in two-stage conversion. Without extra filtering, we expect this to lead to a networking photon signal-to-noise ratio of above 7000 for cavity-integrated SiVs in emission-based schemes.

Optics Express•Feb 2, 2026•0 citations

Fiber-integrated Quantum Frequency Conversion for Long-distance Quantum Networking

Zhichuan Liao, Ao Shen, Lai Zhou +2 more

Signal photons emitted by quantum nodes typically fall outside the low-loss telecom window of optical fibers, leading to severe transmission losses. Quantum frequency conversion (QFC) offers an effective optical interface that bridges quantum nodes with telecom-band channels, enabling long-distance quantum communication. In this work, we demonstrate a compact, fiber-integrated QFC system with low noise and a high signal-to-noise ratio (SNR). Using a periodically poled lithium niobate (PPLN) waveguide, input photons at 637.2 nm are down-converted to telecom photons at 1588.3 nm. Our system achieves a total conversion efficiency of approximately 9%, with pump-induced noise suppressed to 154 Hz. For input photon rates of 32.7, 118.0, and 327.7 kHz, the corresponding SNRs are 12.3, 43.9, and 117.8, respectively. We further develop a theoretical model to simulate the entanglement fidelity between nitrogen-vacancy (NV) center spins and the frequency-converted telecom photons. At the emission rate of an NV center, our QFC system maintains an expected fidelity exceeding 52% over a transmission distance of 100 km. These findings highlight the potential of our QFC system for scalable, long-distance quantum networking.

quant-pharXiv:2604.23444•npj Quantum Information•Apr 28, 2026•0 citations

Proposal for noise-free visible-telecom quantum frequency conversion through third-order sum and difference frequency generation

Xiyuan Lu, Gregory T. Moille, Ashutosh Rao +1 more

Quantum frequency conversion (QFC) between the visible and telecom is a key to connect quantum memories in fiber-based quantum networks. Current methods for linking such widely separated frequencies, such as sum/difference frequency generation and four-wave mixing Bragg scattering, are prone to broadband noise generated by the pump laser(s). To address this issue, we propose to use third-order sum/difference frequency generation (TSFG/TDFG) for an upconversion/downconversion QFC interface. In this process, two long wavelength pump photons combine their energy and momentum to mediate frequency conversion across the large spectral gap between the visible and telecom bands, which is particularly beneficial from the noise perspective. We show that waveguide-coupled silicon nitride microring resonators can be designed for efficient QFC between 606 and 1550 nm via a 1990 nm pump through TSFG/TDFG. We simulate the device dispersion and coupling, and from the simulated parameters, estimate that the frequency conversion can be efficient (${\gt}80 \%$) at 50 mW pump power. Our results suggest that microresonator TSFG/TDFG is promising for compact, scalable, and low-power QFC across large spectral gaps.

arXiv:2010.06811•Optics Letters•Dec 7, 2020•11 citations

A quantum frequency conversion hub interfacing with DWDM networks

Masatake Yamada, Kurama Hirano, Masahiro Yabuno +5 more

Interconnecting heterogeneous quantum systems is an important step toward realizing the quantum internet. We propose a quantum network hub that interfaces local quantum devices with dense wavelength-division multiplexing (DWDM) networks in the telecom band via quantum frequency conversion (QFC) with frequency-channel selectivity. We show that standard periodically poled lithium niobate waveguides used for QFC exhibit a dispersion sweet spot, for example around the 780 nm band, enabling wide tunability of the pump wavelength while maintaining phase matching. Experimentally, we demonstrate the network hub by implementing a channel-selective and polarization-insensitive QFC from 780 nm to telecom wavelengths around 1540 nm. We achieve a pump tuning range of 2 THz and successfully distribute polarization-encoded single photons into 16 frequency channels on the ITU-T DWDM grid with 25 GHz channel spacing, while preserving the quantum information. These results position the QFC-based hub as a versatile backbone for connecting a wide range of quantum devices, spanning both photonic and matter-based systems, across frequency-multiplexed telecom networks.

quant-pharXiv:2604.20620•Optica Quantum•Apr 23, 2026•0 citations
Quantum frequency conversion (QFC) is essential for interfacing quantum systems operating at different wavelengths and for realizing scalable quantum networks. Despite extensive progress, achieving QFC with simultaneous high efficiency, low pump power, minimal noise, broad bandwidth, and pump-wavelength flexibility remains challenging. Here, we demonstrate efficient, low-noise, and bidirectional QFC between the telecom (1550-nm) and visible (780-nm) bands using unpoled indium gallium phosphide (InGaP) χ(2) nanophotonic waveguides, eliminating the need for a long-wavelength pump. Leveraging the large nonlinear susceptibility of InGaP together with adaptive phase-matching control, we obtain 27% (55%) internal efficiency in a 6-mm (2.5-mm)-long waveguide with a low pump power of 20 mW (50 mW) and a noise flux spectral density of 10−4 counts per second per hertz at signal–pump detuning of 20 nm. These results mark a significant advance in integrated nonlinear photonics for high-performance QFC, facilitating the development of versatile and scalable quantum networks. Future quantum networks need low-noise frequency conversion. This work tackles pump-noise and phase-matching limits by using adaptively phase-matched InGaP χ(2) nanowaveguides to efficiently convert telecom and 780 nm light while preserving quantum characteristics.
Quantum frequency conversion (QFC) is essential for bridging the spectral gap between stationary qubits and low-loss optical communication channels. In this work, we demonstrate a short-wavelength-pumping QFC with the first-order quasi-phase matching period of 3.07 um on thin-film lithium niobate, converting ultraviolet photons to the telecom C-band. By constructing a theoretical model that correlates the normalized conversion efficiency with domain defects in the short-period phase-matched waveguide, we found the critical tolerance of domain defects along the waveguide should be ≤2\le 2≤2 (excluding the ends). Based on this, we achieved a theoretical limit normalized conversion efficiency of 839%/(W*cm^2) for the fundamental guided mode through fabrication optimization. Furthermore, we propose a robust noise suppression strategy for short-wavelength pumping by utilizing the counter-tuning behaviors of difference-frequency generation and spontaneous parametric down-conversion. By combining these advances with ultra-narrowband filtering, we achieve a record-high external efficiency of 28.8% and an ultra-low noise of 35 counts per second. This high-performance QFC connecting ultraviolet and telecom bands satisfies the stringent requirements for long-lived remote ion-ion entanglement in scalable quantum networks [W.-Z. Liu et al., Nature (2026)].
High-efficiency quantum frequency conversion (QFC) for group-IV color centers, such as silicon vacancies (SiV), is required for long-distance quantum networking protocols. Performance of QFC depends on the choices of network and pump wavelengths and the choice between bulk crystal and waveguide, since these directly determine the dominant noise processes. These furthermore lead to fiber-based or free-space, single- or multi-pass setups with different complexities, power requirements, losses, and hence, external efficiencies. Here, we present a QFC device design for SiV QFC with simultaneous state-of-the-art performance and simple setup. Namely, by choosing the C-band pump wavelength of λ p = 1561 nm, which leads to an E-band network wavelength of λ n = 1398 nm, we remain in the anti-Stokes noise regime in a one-stage, single-pass conversion scheme. The high-quality erbium-doped fiber amplifiers in this band aid in maximizing the internal nonlinear process. We measure an external (internal) photon conversion efficiency of 44.5 ± 1.8 % (8.5 ± 1.8 %) at an external (internal) pump power of 1.51 W (0.97 W), limited by fiber coupling efficiencies. This is an increase in efficiency by 9 % (25 %) compared to prior demonstrations for SiV QFC, which were limited by factors such as internal device efficiencies, limited available pump power, and losses. We measure a pump-generated noise spectral density of 4913 counts/s/nm, which can be attributed to the anti-Stokes Raman scattering, in line with other one-stage demonstrations, though higher by an order of magnitude than that obtained in two-stage conversion. Without extra filtering, we expect this to lead to a networking photon signal-to-noise ratio of above 7000 for cavity-integrated SiVs in emission-based schemes.
Signal photons emitted by quantum nodes typically fall outside the low-loss telecom window of optical fibers, leading to severe transmission losses. Quantum frequency conversion (QFC) offers an effective optical interface that bridges quantum nodes with telecom-band channels, enabling long-distance quantum communication. In this work, we demonstrate a compact, fiber-integrated QFC system with low noise and a high signal-to-noise ratio (SNR). Using a periodically poled lithium niobate (PPLN) waveguide, input photons at 637.2 nm are down-converted to telecom photons at 1588.3 nm. Our system achieves a total conversion efficiency of approximately 9%, with pump-induced noise suppressed to 154 Hz. For input photon rates of 32.7, 118.0, and 327.7 kHz, the corresponding SNRs are 12.3, 43.9, and 117.8, respectively. We further develop a theoretical model to simulate the entanglement fidelity between nitrogen-vacancy (NV) center spins and the frequency-converted telecom photons. At the emission rate of an NV center, our QFC system maintains an expected fidelity exceeding 52% over a transmission distance of 100 km. These findings highlight the potential of our QFC system for scalable, long-distance quantum networking.
Quantum frequency conversion (QFC) between the visible and telecom is a key to connect quantum memories in fiber-based quantum networks. Current methods for linking such widely separated frequencies, such as sum/difference frequency generation and four-wave mixing Bragg scattering, are prone to broadband noise generated by the pump laser(s). To address this issue, we propose to use third-order sum/difference frequency generation (TSFG/TDFG) for an upconversion/downconversion QFC interface. In this process, two long wavelength pump photons combine their energy and momentum to mediate frequency conversion across the large spectral gap between the visible and telecom bands, which is particularly beneficial from the noise perspective. We show that waveguide-coupled silicon nitride microring resonators can be designed for efficient QFC between 606 and 1550 nm via a 1990 nm pump through TSFG/TDFG. We simulate the device dispersion and coupling, and from the simulated parameters, estimate that the frequency conversion can be efficient (>80%{\gt}80 \%>80%) at 50 mW pump power. Our results suggest that microresonator TSFG/TDFG is promising for compact, scalable, and low-power QFC across large spectral gaps.
Interconnecting heterogeneous quantum systems is an important step toward realizing the quantum internet. We propose a quantum network hub that interfaces local quantum devices with dense wavelength-division multiplexing (DWDM) networks in the telecom band via quantum frequency conversion (QFC) with frequency-channel selectivity. We show that standard periodically poled lithium niobate waveguides used for QFC exhibit a dispersion sweet spot, for example around the 780 nm band, enabling wide tunability of the pump wavelength while maintaining phase matching. Experimentally, we demonstrate the network hub by implementing a channel-selective and polarization-insensitive QFC from 780 nm to telecom wavelengths around 1540 nm. We achieve a pump tuning range of 2 THz and successfully distribute polarization-encoded single photons into 16 frequency channels on the ITU-T DWDM grid with 25 GHz channel spacing, while preserving the quantum information. These results position the QFC-based hub as a versatile backbone for connecting a wide range of quantum devices, spanning both photonic and matter-based systems, across frequency-multiplexed telecom networks.