Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2007.01644 · Physical Review Applied

Surpassing the Resistance Quantum with a Geometric Superinductor

Matilda Peruzzo, Andrea Trioni, Farid Hassani, Martin Žemlička, J. M. Fink

Published Oct 29, 2020• 65 citations
arXivHTMLPDF

Abstract

In superconducting circuits, $s\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}p\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}d\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}o\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}s$ are employed to suppress charge fluctuations and increase zero-point voltage, enabling features for hardware-protected qubits, metrological standards, and strongly coupled hybrid devices. Conventionally these devices are based on kinetic inductance, and can suffer from nonlinearity, additional complexity due to multiterminal structure, and the limited control and reliability of bottom-up fabrication. Making use of miniaturization and substrate engineering, the authors realize a geometrically defined, single-wavefunction superinductor---a high-performance, innovative circuit element that promises to expand the scope of quantum circuitry.

DOI
10.1103/physrevapplied.14.044055

Related papers

High Kinetic Inductance Nb N Nanowire Superinductors

David Niepce, Jonathan Burnett, Jonas Bylander

Quantum decoherence due to charge fluctuations is still a problem in many device architectures for quantum computing or metrology, but it can be suppressed by shunting the circuit with a high microwave impedance, known as a $s\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}p\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}d\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}e$. This study uses the kinetic inductance of a nanowire of disordered superconductor to demonstrate a low-loss, small-capacitance superinductor, in a simpler approach than the traditionally used Josephson-junction arrays. Such nanowire superinductors should have an impact on engineering long-lived superconducting qubits, and quantum-coherent experiments with mesoscopic systems.

arXiv:1802.01723•Physical Review Applied•Apr 4, 2019•159 citations

Applications of superinductors in superconducting quantum circuits

Wenyuan Zhang

Superinductors are inductors whose microwave characteristic impedances are greater than the resistance quantum, $R_{Q}=h/(2e)^{2}approx6.5kOmega$. They can be implemented using Josephson junction chains and high kinetic inductance nanowires. In this dissertation, we explore applications of superinductors in both implementations in superconducting quantum circuits. The dissertation consists of three parts. In the first part, we discuss the fluxon-parity-protected qubit consisting of a Cooper-pair box (CPB) shunted by a superinductor made of a chain of coupled asymmetric Superconducting Quantum Interference Devices (CASQUIDs). The spectroscopic measurement of a prototype of the fluxon-parity-protected qubit was performed. We observed almost complete suppression of the single fluxon tunneling across the CPB due to the destructive Aharonov-Casher interference when the offset charge on the CPB island was set to $e$ mod(2$e$). A fluxon-parity-protected qubit with a higher superinductance can potentially be used to perform fault-tolerant Clifford gates. In the second part, we studied the microwave losses in high-kinetic-inductance granular Aluminum films using superconducting coplanar-waveguide (CPW) resonators made of the films. We observed that the intrinsic losses in these resonators at low temperatures were limited by resonator coupling to the two-level systems (TLS) in the environment. The demonstrated internal quality factors are comparable with those for CPW resonators made of conventional superconductors. The characterized granular Aluminum films can be used to fabricate superinductors for a wide range of applications in quantum metrology and quantum information processing. In the third part, we discuss the one-dimensional Josephson metamaterial made of a similar structure as the superinductor used in the fluxon-parity-protected qubit. The metamaterial demonstrated strong Kerr nonlinearity with the Kerr constant tunable over a wide range from positive to negative values by the magnetic field. The metamaterial is promising for use as an active medium for quantum-limited Josephson traveling-wave parametric amplifiers.

•Jan 1, 2019•1 citation

Implementation of scalable suspended superinductors

Christian Jünger, Trevor Chistolini, Long B. Nguyen +7 more

Superinductors have become a crucial component in the superconducting circuit toolbox, playing a key role in the development of more robust qubits. Enhancing the performance of these devices can be achieved by suspending the superinductors from the substrate, thereby reducing stray capacitance. Here, we present a fabrication framework for constructing superconducting circuits with suspended superinductors in planar architectures. To validate the effectiveness of this process, we systematically characterize both resonators and qubits with suspended arrays of Josephson junctions, ultimately confirming the high quality of the superinductive elements. In addition, this process is broadly compatible with other types of superinductors and circuit designs. Our results not only pave the way for scalable superconducting architectures utilizing superinductors but also provide the primitive for future investigation of loss mechanisms associated with the device substrate.

arXiv:2411.10396•Applied Physics Letters•Jan 27, 2025•9 citations

Geometric Superinductance Qubits: Controlling Phase Delocalization across a Single Josephson Junction

Matilda Peruzzo, Farid Hassani, Gregory Szép +4 more

A large variety of superconducting qubits built from geometric superinductances are demonstrated, highlighting several crucial advantages stemming from the small footprint, high degree of control, and design flexibility.

arXiv:2106.05882•PRX Quantum•Nov 24, 2021•31 citations

Josephson circuits for protected quantum bits

Wen-Sen Lu

Over the past two decades the performance of superconducting quantum bits (qubits) has been improved tremendously: the coherence time of individual qubits has been increased by five orders of magnitude, from a few nanoseconds to >100 μs. The much-improved coherence, lithographic scalability, and compatibility with microwave control place superconducting qubits in the leading position in the race amongst several quantum systems being considered for quantum information processing. Despite this very impressive progress, experimental realization of quantum error corrections and demonstration of logical qubits remains a considerable challenge.One of possible solutions to this problem is the development of so-called protected qubits whose errors would be suppressed by special symmetries of the underlying Hamiltonian. The realization of such qubits requires elements not found in the conventional superconducting circuit toolbox, such as Josephson elements with cos(ϕ/2) and cos(2ϕ) dependences of the Josephson energy E_J on the phase difference ϕ, circuits with a very large kinetic inductance, and junctions with unusually low E_J.This thesis focuses on design, fabrication and characterization of circuits based on low-E_J Josephson junctions (JJs) and superinductors (SIs). By analyzing limitations on the junction performance imposed by the thermally activated phase slips, we observed a dramatic reduction of the critical currents in the regime E_J≤T which was accompanied by an increase of the zero-bias resistance R_0. The first part of this work provides practical considerations for the use of such junctions in quantum circuits. With the aim of improving elements with a very high kinetic inductance, in the second part we developed superinductors based on the granular Aluminum (grAl) films, in which Josephson junctions are realized between nanoscale grains. The circuits based on such SIs demonstrate low microwave losses at ultra-low temperatures. Superinductors are an essential element of a novel qubit that we have developed – the so-called bifluxon. The qubit consists of a Cooper-pair box (CPB) with low-E_J Josephson junctions shunted by a superinductor, thus forming a superconducting loop. When the loop is threaded by the magnetic flux Φ=Φ_0⁄2 where Φ_0 is the flux quantum, the qubit offers exponential suppression of energy decay from charge and flux noises, and dephasing from flux noise. In the last part of this work, we observed an increase of the energy relaxation time by two orders of magnitude, up to 100μs, by turning on protection in the bifluxon qubit.

•Jan 1, 2021•1 citation

Superinductor-Based Non-Perturbative Ultrastrong Coupling in a Superconducting Quantum Circuit

P. Forn-Díaz

MATSUS Spring Conference•Dec 15, 2025•0 citations
In superconducting circuits, s\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}p\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}d\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}o\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}s are employed to suppress charge fluctuations and increase zero-point voltage, enabling features for hardware-protected qubits, metrological standards, and strongly coupled hybrid devices. Conventionally these devices are based on kinetic inductance, and can suffer from nonlinearity, additional complexity due to multiterminal structure, and the limited control and reliability of bottom-up fabrication. Making use of miniaturization and substrate engineering, the authors realize a geometrically defined, single-wavefunction superinductor---a high-performance, innovative circuit element that promises to expand the scope of quantum circuitry.
Quantum decoherence due to charge fluctuations is still a problem in many device architectures for quantum computing or metrology, but it can be suppressed by shunting the circuit with a high microwave impedance, known as a $s\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}p\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}d\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}e$. This study uses the kinetic inductance of a nanowire of disordered superconductor to demonstrate a low-loss, small-capacitance superinductor, in a simpler approach than the traditionally used Josephson-junction arrays. Such nanowire superinductors should have an impact on engineering long-lived superconducting qubits, and quantum-coherent experiments with mesoscopic systems.
Superinductors are inductors whose microwave characteristic impedances are greater than the resistance quantum, RQ=h/(2e)2approx6.5kOmegaR_{Q}=h/(2e)^{2}approx6.5kOmegaRQ​=h/(2e)2approx6.5kOmega. They can be implemented using Josephson junction chains and high kinetic inductance nanowires. In this dissertation, we explore applications of superinductors in both implementations in superconducting quantum circuits. The dissertation consists of three parts. In the first part, we discuss the fluxon-parity-protected qubit consisting of a Cooper-pair box (CPB) shunted by a superinductor made of a chain of coupled asymmetric Superconducting Quantum Interference Devices (CASQUIDs). The spectroscopic measurement of a prototype of the fluxon-parity-protected qubit was performed. We observed almost complete suppression of the single fluxon tunneling across the CPB due to the destructive Aharonov-Casher interference when the offset charge on the CPB island was set to eee mod(2eee). A fluxon-parity-protected qubit with a higher superinductance can potentially be used to perform fault-tolerant Clifford gates. In the second part, we studied the microwave losses in high-kinetic-inductance granular Aluminum films using superconducting coplanar-waveguide (CPW) resonators made of the films. We observed that the intrinsic losses in these resonators at low temperatures were limited by resonator coupling to the two-level systems (TLS) in the environment. The demonstrated internal quality factors are comparable with those for CPW resonators made of conventional superconductors. The characterized granular Aluminum films can be used to fabricate superinductors for a wide range of applications in quantum metrology and quantum information processing. In the third part, we discuss the one-dimensional Josephson metamaterial made of a similar structure as the superinductor used in the fluxon-parity-protected qubit. The metamaterial demonstrated strong Kerr nonlinearity with the Kerr constant tunable over a wide range from positive to negative values by the magnetic field. The metamaterial is promising for use as an active medium for quantum-limited Josephson traveling-wave parametric amplifiers.
Superinductors have become a crucial component in the superconducting circuit toolbox, playing a key role in the development of more robust qubits. Enhancing the performance of these devices can be achieved by suspending the superinductors from the substrate, thereby reducing stray capacitance. Here, we present a fabrication framework for constructing superconducting circuits with suspended superinductors in planar architectures. To validate the effectiveness of this process, we systematically characterize both resonators and qubits with suspended arrays of Josephson junctions, ultimately confirming the high quality of the superinductive elements. In addition, this process is broadly compatible with other types of superinductors and circuit designs. Our results not only pave the way for scalable superconducting architectures utilizing superinductors but also provide the primitive for future investigation of loss mechanisms associated with the device substrate.
Over the past two decades the performance of superconducting quantum bits (qubits) has been improved tremendously: the coherence time of individual qubits has been increased by five orders of magnitude, from a few nanoseconds to >100 μs. The much-improved coherence, lithographic scalability, and compatibility with microwave control place superconducting qubits in the leading position in the race amongst several quantum systems being considered for quantum information processing. Despite this very impressive progress, experimental realization of quantum error corrections and demonstration of logical qubits remains a considerable challenge.One of possible solutions to this problem is the development of so-called protected qubits whose errors would be suppressed by special symmetries of the underlying Hamiltonian. The realization of such qubits requires elements not found in the conventional superconducting circuit toolbox, such as Josephson elements with cos(ϕ/2) and cos(2ϕ) dependences of the Josephson energy E_J on the phase difference ϕ, circuits with a very large kinetic inductance, and junctions with unusually low E_J.This thesis focuses on design, fabrication and characterization of circuits based on low-E_J Josephson junctions (JJs) and superinductors (SIs). By analyzing limitations on the junction performance imposed by the thermally activated phase slips, we observed a dramatic reduction of the critical currents in the regime E_J≤T which was accompanied by an increase of the zero-bias resistance R_0. The first part of this work provides practical considerations for the use of such junctions in quantum circuits. With the aim of improving elements with a very high kinetic inductance, in the second part we developed superinductors based on the granular Aluminum (grAl) films, in which Josephson junctions are realized between nanoscale grains. The circuits based on such SIs demonstrate low microwave losses at ultra-low temperatures. Superinductors are an essential element of a novel qubit that we have developed – the so-called bifluxon. The qubit consists of a Cooper-pair box (CPB) with low-E_J Josephson junctions shunted by a superinductor, thus forming a superconducting loop. When the loop is threaded by the magnetic flux Φ=Φ_0⁄2 where Φ_0 is the flux quantum, the qubit offers exponential suppression of energy decay from charge and flux noises, and dephasing from flux noise. In the last part of this work, we observed an increase of the energy relaxation time by two orders of magnitude, up to 100μs, by turning on protection in the bifluxon qubit.