Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applications of superinductors in superconducting quantum circuits

Wenyuan Zhang

Published Jan 1, 2019• 1 citation
Publisher

Abstract

Superinductors are inductors whose microwave characteristic impedances are greater than the resistance quantum, $R_{Q}=h/(2e)^{2}approx6.5kOmega$. They can be implemented using Josephson junction chains and high kinetic inductance nanowires. In this dissertation, we explore applications of superinductors in both implementations in superconducting quantum circuits. The dissertation consists of three parts. In the first part, we discuss the fluxon-parity-protected qubit consisting of a Cooper-pair box (CPB) shunted by a superinductor made of a chain of coupled asymmetric Superconducting Quantum Interference Devices (CASQUIDs). The spectroscopic measurement of a prototype of the fluxon-parity-protected qubit was performed. We observed almost complete suppression of the single fluxon tunneling across the CPB due to the destructive Aharonov-Casher interference when the offset charge on the CPB island was set to $e$ mod(2$e$). A fluxon-parity-protected qubit with a higher superinductance can potentially be used to perform fault-tolerant Clifford gates. In the second part, we studied the microwave losses in high-kinetic-inductance granular Aluminum films using superconducting coplanar-waveguide (CPW) resonators made of the films. We observed that the intrinsic losses in these resonators at low temperatures were limited by resonator coupling to the two-level systems (TLS) in the environment. The demonstrated internal quality factors are comparable with those for CPW resonators made of conventional superconductors. The characterized granular Aluminum films can be used to fabricate superinductors for a wide range of applications in quantum metrology and quantum information processing. In the third part, we discuss the one-dimensional Josephson metamaterial made of a similar structure as the superinductor used in the fluxon-parity-protected qubit. The metamaterial demonstrated strong Kerr nonlinearity with the Kerr constant tunable over a wide range from positive to negative values by the magnetic field. The metamaterial is promising for use as an active medium for quantum-limited Josephson traveling-wave parametric amplifiers.

DOI
10.7282/t3-3g4k-wt20

Related papers

Josephson circuits for protected quantum bits

Wen-Sen Lu

Over the past two decades the performance of superconducting quantum bits (qubits) has been improved tremendously: the coherence time of individual qubits has been increased by five orders of magnitude, from a few nanoseconds to >100 μs. The much-improved coherence, lithographic scalability, and compatibility with microwave control place superconducting qubits in the leading position in the race amongst several quantum systems being considered for quantum information processing. Despite this very impressive progress, experimental realization of quantum error corrections and demonstration of logical qubits remains a considerable challenge.One of possible solutions to this problem is the development of so-called protected qubits whose errors would be suppressed by special symmetries of the underlying Hamiltonian. The realization of such qubits requires elements not found in the conventional superconducting circuit toolbox, such as Josephson elements with cos(ϕ/2) and cos(2ϕ) dependences of the Josephson energy E_J on the phase difference ϕ, circuits with a very large kinetic inductance, and junctions with unusually low E_J.This thesis focuses on design, fabrication and characterization of circuits based on low-E_J Josephson junctions (JJs) and superinductors (SIs). By analyzing limitations on the junction performance imposed by the thermally activated phase slips, we observed a dramatic reduction of the critical currents in the regime E_J≤T which was accompanied by an increase of the zero-bias resistance R_0. The first part of this work provides practical considerations for the use of such junctions in quantum circuits. With the aim of improving elements with a very high kinetic inductance, in the second part we developed superinductors based on the granular Aluminum (grAl) films, in which Josephson junctions are realized between nanoscale grains. The circuits based on such SIs demonstrate low microwave losses at ultra-low temperatures. Superinductors are an essential element of a novel qubit that we have developed – the so-called bifluxon. The qubit consists of a Cooper-pair box (CPB) with low-E_J Josephson junctions shunted by a superinductor, thus forming a superconducting loop. When the loop is threaded by the magnetic flux Φ=Φ_0⁄2 where Φ_0 is the flux quantum, the qubit offers exponential suppression of energy decay from charge and flux noises, and dephasing from flux noise. In the last part of this work, we observed an increase of the energy relaxation time by two orders of magnitude, up to 100μs, by turning on protection in the bifluxon qubit.

•Jan 1, 2021•1 citation

Pushing the Boundaries of Impedance and Nonlinearity in Superconducting Quantum Circuits Based on Granular Aluminum

Mahya Khorramshahi

Superconducting circuits based on high kinetic inductance materials are promising candidates for future quantum technologies, owing to their magnetic field resilience, low microwave losses, and lithographic scalability. In this thesis, we explore the properties of granular aluminum (grAl) resonators in two distinct geometries, using the nonlinear kinetic inductance of grAl for applications in superconducting quantum circuits. In the first part, we present compact meandered ring resonators fabricated using a single-step electron-beam lithography and lift-off process. By optimizing film resistivity and geometry, we achieve superinductors with characteristic impedances exceeding \(100~\mathrm{k}\Omega\), corresponding to total inductances of several microhenries, while maintaining internal quality factors on the order of \(10^{5}\) in the single-photon regime. In the second part, we investigate DC-tunable resonators based on a \(3\lambda/4\) fractal geometry that allows direct current injection for in-situ tuning of the resonance frequency. We achieve frequency tunability up to \(4.5\%\) and analyze the nonlinear kinetic inductance using models based on Ginzburg-Landau, Mattis-Bardeen-BCS, and an effective Josephson-junction-array model. This work establishes granular aluminum as a material for realizing high-impedance and frequency-tunable superconducting circuits, offering new opportunities for advanced applications in protected qubits, hybrid quantum systems, broadband phase shifters, and three-wave mixing parametric amplifiers.

•Jan 1, 2026•0 citations

Granular Aluminum Meandered Superinductors for Quantum Circuits

Plamen Kamenov, Wen-Sen Lu, K. V. Kalashnikov +3 more

We design superinductors made of strongly disordered superconductors for implementation in ``hybrid'' superconducting quantum circuits. The superinductors are fabricated as meandered nanowires made from granular aluminum films. Optimization of the device geometry enables the realization of superinductors with an inductance of approximately 1 $\ensuremath{\mu}\mathrm{H}$ and a self-resonance frequency of over 3 GHz. These compact superinductors are attractive for a wide range of applications, from superconducting circuits for quantum computing to microwave elements of cryogenic parametric amplifiers and kinetic inductance photon detectors.

arXiv:1910.00996•Physical Review Applied•May 20, 2020•42 citations

Superinductance and fluctuating two-level systems: Loss and noise in disordered and non-disordered superconducting quantum devices

David Niepce

In this thesis, we first demonstrate that a disordered superconductor with high kinetic inductance can realise a microwave low-loss, non-dissipative circuit element with impedance greater than the quantum resistance. This element, known as a superinductor, can suppress the fluctuations of charge in a quantum circuit.For this purpose, we fabricated and characterised 20 nm thick, 40 nm wide niobium-nitride nanowires and determined the impedance to 6.795 kΩ. We demonstrate internal quality factors Qi = 2.5e4 in nanowire resonators at single photon excitation, which is significantly higher than values reported in devices with similar materials and geometries. Moreover, we show that the dominant dissipation in our nanowires is not an intrinsic property of the disordered films, but can instead be fully understood within the framework of two-level systems.To further characterise these losses, we then explore the geometrical scaling, toward nanowire dimensions, of dielectric losses in superconducting microwave resonators fabricated with the same techniques and from the same NbN thin-film as the nanowire superinductors. For this purpose, we perform an experimental and numerical study of dielectric loss at low temperatures. Using 3D finite-element simulation of the Maxwell--London equations, we compute the geometric filling factors of the lossy regions in our resonator structures and fit the experimental data to determine the intrinsic loss tangents of its interfaces and dielectrics. Finally, we study the effect of two-level systems on the performance of various superconducting quantum circuits. For this purpose, we measure coherence-time fluctuations in qubits and frequency fluctuations in resonators. In all devices, through statistical analysis, we identify the signature of individual Lorentzian fluctuators in the noise. We find that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems. Furthermore, when examining the low-frequency noise of three different types of superconducting resonator - one NbN nanowire, one Al coplanar waveguide, and one Al 3D cavity - we observe a similar power-law dependence of the Lorentzian switching time and amplitude on the circulating power in the resonators, suggesting a common noise mechanism in the three different types of devices.

•Jan 1, 2020•2 citations

High Kinetic Inductance Nb N Nanowire Superinductors

David Niepce, Jonathan Burnett, Jonas Bylander

Quantum decoherence due to charge fluctuations is still a problem in many device architectures for quantum computing or metrology, but it can be suppressed by shunting the circuit with a high microwave impedance, known as a $s\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}p\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}d\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}e$. This study uses the kinetic inductance of a nanowire of disordered superconductor to demonstrate a low-loss, small-capacitance superinductor, in a simpler approach than the traditionally used Josephson-junction arrays. Such nanowire superinductors should have an impact on engineering long-lived superconducting qubits, and quantum-coherent experiments with mesoscopic systems.

arXiv:1802.01723•Physical Review Applied•Apr 4, 2019•159 citations

Development of high quality superconducting resonators for quantum device applications

Dong-Gwang Ha, Seon Hoo Kim, So-Yeon Jun +5 more

We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•0 citations
Superinductors are inductors whose microwave characteristic impedances are greater than the resistance quantum, RQ=h/(2e)2approx6.5kOmegaR_{Q}=h/(2e)^{2}approx6.5kOmegaRQ​=h/(2e)2approx6.5kOmega. They can be implemented using Josephson junction chains and high kinetic inductance nanowires. In this dissertation, we explore applications of superinductors in both implementations in superconducting quantum circuits. The dissertation consists of three parts. In the first part, we discuss the fluxon-parity-protected qubit consisting of a Cooper-pair box (CPB) shunted by a superinductor made of a chain of coupled asymmetric Superconducting Quantum Interference Devices (CASQUIDs). The spectroscopic measurement of a prototype of the fluxon-parity-protected qubit was performed. We observed almost complete suppression of the single fluxon tunneling across the CPB due to the destructive Aharonov-Casher interference when the offset charge on the CPB island was set to eee mod(2eee). A fluxon-parity-protected qubit with a higher superinductance can potentially be used to perform fault-tolerant Clifford gates. In the second part, we studied the microwave losses in high-kinetic-inductance granular Aluminum films using superconducting coplanar-waveguide (CPW) resonators made of the films. We observed that the intrinsic losses in these resonators at low temperatures were limited by resonator coupling to the two-level systems (TLS) in the environment. The demonstrated internal quality factors are comparable with those for CPW resonators made of conventional superconductors. The characterized granular Aluminum films can be used to fabricate superinductors for a wide range of applications in quantum metrology and quantum information processing. In the third part, we discuss the one-dimensional Josephson metamaterial made of a similar structure as the superinductor used in the fluxon-parity-protected qubit. The metamaterial demonstrated strong Kerr nonlinearity with the Kerr constant tunable over a wide range from positive to negative values by the magnetic field. The metamaterial is promising for use as an active medium for quantum-limited Josephson traveling-wave parametric amplifiers.
Over the past two decades the performance of superconducting quantum bits (qubits) has been improved tremendously: the coherence time of individual qubits has been increased by five orders of magnitude, from a few nanoseconds to >100 μs. The much-improved coherence, lithographic scalability, and compatibility with microwave control place superconducting qubits in the leading position in the race amongst several quantum systems being considered for quantum information processing. Despite this very impressive progress, experimental realization of quantum error corrections and demonstration of logical qubits remains a considerable challenge.One of possible solutions to this problem is the development of so-called protected qubits whose errors would be suppressed by special symmetries of the underlying Hamiltonian. The realization of such qubits requires elements not found in the conventional superconducting circuit toolbox, such as Josephson elements with cos(ϕ/2) and cos(2ϕ) dependences of the Josephson energy E_J on the phase difference ϕ, circuits with a very large kinetic inductance, and junctions with unusually low E_J.This thesis focuses on design, fabrication and characterization of circuits based on low-E_J Josephson junctions (JJs) and superinductors (SIs). By analyzing limitations on the junction performance imposed by the thermally activated phase slips, we observed a dramatic reduction of the critical currents in the regime E_J≤T which was accompanied by an increase of the zero-bias resistance R_0. The first part of this work provides practical considerations for the use of such junctions in quantum circuits. With the aim of improving elements with a very high kinetic inductance, in the second part we developed superinductors based on the granular Aluminum (grAl) films, in which Josephson junctions are realized between nanoscale grains. The circuits based on such SIs demonstrate low microwave losses at ultra-low temperatures. Superinductors are an essential element of a novel qubit that we have developed – the so-called bifluxon. The qubit consists of a Cooper-pair box (CPB) with low-E_J Josephson junctions shunted by a superinductor, thus forming a superconducting loop. When the loop is threaded by the magnetic flux Φ=Φ_0⁄2 where Φ_0 is the flux quantum, the qubit offers exponential suppression of energy decay from charge and flux noises, and dephasing from flux noise. In the last part of this work, we observed an increase of the energy relaxation time by two orders of magnitude, up to 100μs, by turning on protection in the bifluxon qubit.
Superconducting circuits based on high kinetic inductance materials are promising candidates for future quantum technologies, owing to their magnetic field resilience, low microwave losses, and lithographic scalability. In this thesis, we explore the properties of granular aluminum (grAl) resonators in two distinct geometries, using the nonlinear kinetic inductance of grAl for applications in superconducting quantum circuits. In the first part, we present compact meandered ring resonators fabricated using a single-step electron-beam lithography and lift-off process. By optimizing film resistivity and geometry, we achieve superinductors with characteristic impedances exceeding 100 kΩ100~\mathrm{k}\Omega100 kΩ, corresponding to total inductances of several microhenries, while maintaining internal quality factors on the order of 10510^{5}105 in the single-photon regime. In the second part, we investigate DC-tunable resonators based on a 3λ/43\lambda/43λ/4 fractal geometry that allows direct current injection for in-situ tuning of the resonance frequency. We achieve frequency tunability up to 4.5%4.5\%4.5% and analyze the nonlinear kinetic inductance using models based on Ginzburg-Landau, Mattis-Bardeen-BCS, and an effective Josephson-junction-array model. This work establishes granular aluminum as a material for realizing high-impedance and frequency-tunable superconducting circuits, offering new opportunities for advanced applications in protected qubits, hybrid quantum systems, broadband phase shifters, and three-wave mixing parametric amplifiers.
We design superinductors made of strongly disordered superconductors for implementation in ``hybrid'' superconducting quantum circuits. The superinductors are fabricated as meandered nanowires made from granular aluminum films. Optimization of the device geometry enables the realization of superinductors with an inductance of approximately 1 $\ensuremath{\mu}\mathrm{H}$ and a self-resonance frequency of over 3 GHz. These compact superinductors are attractive for a wide range of applications, from superconducting circuits for quantum computing to microwave elements of cryogenic parametric amplifiers and kinetic inductance photon detectors.
In this thesis, we first demonstrate that a disordered superconductor with high kinetic inductance can realise a microwave low-loss, non-dissipative circuit element with impedance greater than the quantum resistance. This element, known as a superinductor, can suppress the fluctuations of charge in a quantum circuit.For this purpose, we fabricated and characterised 20 nm thick, 40 nm wide niobium-nitride nanowires and determined the impedance to 6.795 kΩ. We demonstrate internal quality factors Qi = 2.5e4 in nanowire resonators at single photon excitation, which is significantly higher than values reported in devices with similar materials and geometries. Moreover, we show that the dominant dissipation in our nanowires is not an intrinsic property of the disordered films, but can instead be fully understood within the framework of two-level systems.To further characterise these losses, we then explore the geometrical scaling, toward nanowire dimensions, of dielectric losses in superconducting microwave resonators fabricated with the same techniques and from the same NbN thin-film as the nanowire superinductors. For this purpose, we perform an experimental and numerical study of dielectric loss at low temperatures. Using 3D finite-element simulation of the Maxwell--London equations, we compute the geometric filling factors of the lossy regions in our resonator structures and fit the experimental data to determine the intrinsic loss tangents of its interfaces and dielectrics. Finally, we study the effect of two-level systems on the performance of various superconducting quantum circuits. For this purpose, we measure coherence-time fluctuations in qubits and frequency fluctuations in resonators. In all devices, through statistical analysis, we identify the signature of individual Lorentzian fluctuators in the noise. We find that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems. Furthermore, when examining the low-frequency noise of three different types of superconducting resonator - one NbN nanowire, one Al coplanar waveguide, and one Al 3D cavity - we observe a similar power-law dependence of the Lorentzian switching time and amplitude on the circulating power in the resonators, suggesting a common noise mechanism in the three different types of devices.
Quantum decoherence due to charge fluctuations is still a problem in many device architectures for quantum computing or metrology, but it can be suppressed by shunting the circuit with a high microwave impedance, known as a $s\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}p\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}d\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}e$. This study uses the kinetic inductance of a nanowire of disordered superconductor to demonstrate a low-loss, small-capacitance superinductor, in a simpler approach than the traditionally used Josephson-junction arrays. Such nanowire superinductors should have an impact on engineering long-lived superconducting qubits, and quantum-coherent experiments with mesoscopic systems.
We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.