Over the past two decades the performance of superconducting quantum bits (qubits) has been improved tremendously: the coherence time of individual qubits has been increased by five orders of magnitude, from a few nanoseconds to >100 μs. The much-improved coherence, lithographic scalability, and compatibility with microwave control place superconducting qubits in the leading position in the race amongst several quantum systems being considered for quantum information processing. Despite this very impressive progress, experimental realization of quantum error corrections and demonstration of logical qubits remains a considerable challenge.One of possible solutions to this problem is the development of so-called protected qubits whose errors would be suppressed by special symmetries of the underlying Hamiltonian. The realization of such qubits requires elements not found in the conventional superconducting circuit toolbox, such as Josephson elements with cos(ϕ/2) and cos(2ϕ) dependences of the Josephson energy E_J on the phase difference ϕ, circuits with a very large kinetic inductance, and junctions with unusually low E_J.This thesis focuses on design, fabrication and characterization of circuits based on low-E_J Josephson junctions (JJs) and superinductors (SIs). By analyzing limitations on the junction performance imposed by the thermally activated phase slips, we observed a dramatic reduction of the critical currents in the regime E_J≤T which was accompanied by an increase of the zero-bias resistance R_0. The first part of this work provides practical considerations for the use of such junctions in quantum circuits. With the aim of improving elements with a very high kinetic inductance, in the second part we developed superinductors based on the granular Aluminum (grAl) films, in which Josephson junctions are realized between nanoscale grains. The circuits based on such SIs demonstrate low microwave losses at ultra-low temperatures. Superinductors are an essential element of a novel qubit that we have developed – the so-called bifluxon. The qubit consists of a Cooper-pair box (CPB) with low-E_J Josephson junctions shunted by a superinductor, thus forming a superconducting loop. When the loop is threaded by the magnetic flux Φ=Φ_0⁄2 where Φ_0 is the flux quantum, the qubit offers exponential suppression of energy decay from charge and flux noises, and dephasing from flux noise. In the last part of this work, we observed an increase of the energy relaxation time by two orders of magnitude, up to 100μs, by turning on protection in the bifluxon qubit.
Over the past two decades the performance of superconducting quantum bits (qubits) has been improved tremendously: the coherence time of individual qubits has been increased by five orders of magnitude, from a few nanoseconds to >100 μs. The much-improved coherence, lithographic scalability, and compatibility with microwave control place superconducting qubits in the leading position in the race amongst several quantum systems being considered for quantum information processing. Despite this very impressive progress, experimental realization of quantum error corrections and demonstration of logical qubits remains a considerable challenge.One of possible solutions to this problem is the development of so-called protected qubits whose errors would be suppressed by special symmetries of the underlying Hamiltonian. The realization of such qubits requires elements not found in the conventional superconducting circuit toolbox, such as Josephson elements with cos(ϕ/2) and cos(2ϕ) dependences of the Josephson energy E_J on the phase difference ϕ, circuits with a very large kinetic inductance, and junctions with unusually low E_J.This thesis focuses on design, fabrication and characterization of circuits based on low-E_J Josephson junctions (JJs) and superinductors (SIs). By analyzing limitations on the junction performance imposed by the thermally activated phase slips, we observed a dramatic reduction of the critical currents in the regime E_J≤T which was accompanied by an increase of the zero-bias resistance R_0. The first part of this work provides practical considerations for the use of such junctions in quantum circuits. With the aim of improving elements with a very high kinetic inductance, in the second part we developed superinductors based on the granular Aluminum (grAl) films, in which Josephson junctions are realized between nanoscale grains. The circuits based on such SIs demonstrate low microwave losses at ultra-low temperatures. Superinductors are an essential element of a novel qubit that we have developed – the so-called bifluxon. The qubit consists of a Cooper-pair box (CPB) with low-E_J Josephson junctions shunted by a superinductor, thus forming a superconducting loop. When the loop is threaded by the magnetic flux Φ=Φ_0⁄2 where Φ_0 is the flux quantum, the qubit offers exponential suppression of energy decay from charge and flux noises, and dephasing from flux noise. In the last part of this work, we observed an increase of the energy relaxation time by two orders of magnitude, up to 100μs, by turning on protection in the bifluxon qubit.
Superinductors are inductors whose microwave characteristic impedances are greater than the resistance quantum, RQ=h/(2e)2approx6.5kOmega. They can be implemented using Josephson junction chains and high kinetic inductance nanowires. In this dissertation, we explore applications of superinductors in both implementations in superconducting quantum circuits. The dissertation consists of three parts. In the first part, we discuss the fluxon-parity-protected qubit consisting of a Cooper-pair box (CPB) shunted by a superinductor made of a chain of coupled asymmetric Superconducting Quantum Interference Devices (CASQUIDs). The spectroscopic measurement of a prototype of the fluxon-parity-protected qubit was performed. We observed almost complete suppression of the single fluxon tunneling across the CPB due to the destructive Aharonov-Casher interference when the offset charge on the CPB island was set to e mod(2e). A fluxon-parity-protected qubit with a higher superinductance can potentially be used to perform fault-tolerant Clifford gates. In the second part, we studied the microwave losses in high-kinetic-inductance granular Aluminum films using superconducting coplanar-waveguide (CPW) resonators made of the films. We observed that the intrinsic losses in these resonators at low temperatures were limited by resonator coupling to the two-level systems (TLS) in the environment. The demonstrated internal quality factors are comparable with those for CPW resonators made of conventional superconductors. The characterized granular Aluminum films can be used to fabricate superinductors for a wide range of applications in quantum metrology and quantum information processing. In the third part, we discuss the one-dimensional Josephson metamaterial made of a similar structure as the superinductor used in the fluxon-parity-protected qubit. The metamaterial demonstrated strong Kerr nonlinearity with the Kerr constant tunable over a wide range from positive to negative values by the magnetic field. The metamaterial is promising for use as an active medium for quantum-limited Josephson traveling-wave parametric amplifiers.
The aim of this thesis was to realize superconducting quantum bits by using novel fabrication techniques and materials in order to enhance the coherence time of the former devices. For the system to be studied we chose the ux-biased phase qubit, which consists of a Josephson junction integrated in a superconducting loop. This qubit realization has some advantages, which make it an ideal test-bed for different fabrication technologies and materials. Relatively large Josephson junctions can be used in the phase qubit realization, which are easy to be fabricated by using standard lithographic technology with the flexibility of employing various fabrication techniques and materials. The coherence of current-generation of superconducting qubits seems to be limited by intrinsic sources of noise and energy loss, related to materials' defects (two-level systems, TLSs) on the surfaces and interfaces of the superconducting lms, and in the bulk of the dielectric films used for the microelectronic realization of the circuits. For this reason, we aimed our research activities on the realization of low loss dielectrics (a-Si:H), on its integration with Josephson junction technologies, on the protection of the superconducting films' surfaces from unwanted contamination, and on the optimization of the circuit design and fabrication processes.
Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.
We develop and characterize a symmetry-protected superconducting qubit that offers simultaneous exponential suppression of energy decay from charge and flux noises, and dephasing from flux noise.The qubit consists of a Cooper-pair box (CPB) shunted by a superinductor, forming a superconducting loop.Provided the offset charge on the CPB island is an odd number of electrons, the qubit potential corresponds to that of a cos (φ/2) Josephson element, preserving the parity of fluxons in the loop via Aharonov-Casher interference.In this regime, the logical-state wavefunctions reside in disjoint regions of Hilbert space, thereby ensuring protection against energy decay.By switching the protection on, we observe a tenfold increase of the decay time, reaching up to 100 μs.Though the qubit is sensitive to charge noise, the sensitivity is much reduced in comparison with the charge qubit, and the charge-noise-induced dephasing time of the current device exceeds 1 μs.Implementation of full dephasing protection can be achieved in the next-generation devices by combining several cos(φ/2) Josephson elements in a small array.
In the past few years there has been an increasing amount of media coverage on quantum computing, largely due to the substantial investment in the superconducting circuit quantum electrodynamics (cQED) technologies by several governments and technology and finance companies throughout the world. Since their inception, superconducting qubits have realized several orders of magnitude improvement in information lifetimes, but individual qubit lifetimes must be further improved to realize a fault-tolerant quantum computer. A critical component of these circuits, which allows quantum states to be addressed, is the non-linear inductive element known as the Josephson junction. In this thesis, we will present experimental studies showing how to design and fabricate the Josephson element to leverage a recently developed `superinductor' as a way to engineer new qubit regimes, such as the heavy fluxonium. We create the heavy fluxonium with a chain of large Josephson junctions and a large shunting capacitor. This shunting capacitor increases the effective mass of a fictitious particle inside the wells of the heavy fluxonium potential energy landscape, giving rise to two characteristically different transitions: intra-well transmon-like plasmon transitions and inter-well fluxon transitions. The fluxon transitions are heavily suppressed by a reduced dipole matrix element realized from the increased effective mass, and result in metastable fluxon transitions, with T1's as large as 8ms. This qubit design offers the possibility to study qubit interaction with the thermal bath, the implementation of atomic state preparation techniques such as Raman gates, optical pumping and fluorescent style readout, as well as the possibility to make substantial improvements in qubit lifetimes and create protected qubits in the cQED platform.
Superconducting quantum circuits rely on compact, low-loss inductive elements, strong anharmonicity, and robust flux biasing to realize coherent and controllable quantum bits. This thesis investigates how vertically stacked Josephson junction arrays can be employed to meet these requirements and enable compact flux qubits operated in the quarton regime. In the first part, stacked Al/AlOx/Al Josephson junctions are established as compact linear inductors. Their three-dimensional geometry reduces parasitic capacitance to ground while allowing multiple junctions to be integrated within a small footprint. A numerical modeling approach is used to quantify stray capacitances, Coulomb screening, and collective modes of extended stacked junction arrays. Cryogenic transport measurements confirm strongly underdamped junction dynamics with uniform junction characteristics, demonstrating their suitability as low-loss inductive elements in superconducting circuits. In the second part, these inductors are integrated into flux qubits operated in the quarton regime. In this regime, the qubit potential becomes nearly quartic around half-flux bias, resulting in positive anharmonicity and first-order insensitivity to flux noise at the operating point. Spectroscopy reveals qubit transition frequencies in the 3–5 GHz range and anharmonicities of 0.5–1.5 GHz, consistent with the expected quartic potential landscape. To distinguish intrinsic from externally induced decoherence, a persistent-current bias scheme is implemented, enabling stable and low-noise flux biasing over time scales of up to one week. A direct comparison between conventionally biased and persistently biased devices rules out external flux noise as the dominant coherence-limiting mechanism. High-resolution spectroscopy identifies avoided level crossings caused by microscopic two-level systems (TLS) in the amorphous tunnel barriers of the stacked junctions. A systematic cumulative analysis of splitting statistics across multiple devices shows that the spectral TLS density scales with the total tunnel-barrier area, while the array length determines the effective qubit–TLS coupling strength. The measured relaxation times follow scaling relations consistent with Fermi’s golden rule for a bath of weakly coupled TLS, demonstrating that TLS in the stacked junction arrays constitute the dominant intrinsic decoherence channel in quarton qubits. These results establish stacked Josephson junction arrays as compact superinductive elements and provide an understanding of coherence limitations in superconducting quantum circuits based on Josephson junction arrays, offering guidance for future device optimization.