The existence of ideal quantum measurements is one of the fundamental predictions of quantum mechanics. In theory, an ideal measurement projects a quantum state onto the eigenbasis of the measurement observable, while preserving coherences between eigenstates that have the same eigenvalue. The question arises whether there are processes in nature that correspond to such ideal quantum measurements and how such processes are dynamically implemented in nature. Here we address this question and present experimental results monitoring the dynamics of a naturally occurring measurement process: the coupling of a trapped ion qutrit to the photon environment. By taking tomographic snapshots during the detection process, we show that the process develops in agreement with the model of an ideal quantum measurement with an average fidelity of 94%.
The existence of ideal quantum measurements is one of the fundamental predictions of quantum mechanics. In theory, an ideal measurement projects a quantum state onto the eigenbasis of the measurement observable, while preserving coherences between eigenstates that have the same eigenvalue. The question arises whether there are processes in nature that correspond to such ideal quantum measurements and how such processes are dynamically implemented in nature. Here we address this question and present experimental results monitoring the dynamics of a naturally occurring measurement process: the coupling of a trapped ion qutrit to the photon environment. By taking tomographic snapshots during the detection process, we show that the process develops in agreement with the model of an ideal quantum measurement with an average fidelity of 94%.
In an ideal quantum measurement, the wave function of a quantum system collapses to an eigenstate of the measured observable, and the corresponding eigenvalue determines the measurement outcome. If the observable commutes with the system Hamiltonian, repeated measurements yield the same result and thus minimally disturb the system. Seminal quantum optics experiments have achieved such quantum non-demolition (QND) measurements of systems with few degrees of freedom. In contrast, here we describe how the QND measurement of a complex many-body observable, the Hamiltonian of an interacting many-body system, can be implemented in a trapped-ion analog quantum simulator. Through a single-shot measurement, the many-body system is prepared in a narrow band of (highly excited) energy eigenstates, and potentially even a single eigenstate. Our QND scheme, which can be carried over to other platforms of quantum simulation, provides a framework to investigate experimentally fundamental aspects of equilibrium and non-equilibrium statistical physics including the eigenstate thermalization hypothesis and quantum fluctuation relations.
This is a theoretical thesis in the area of quantum measurement theory. Due to the extensive breadth of this field we choose to narrow our focus to examine a particular problem - the quantum Zeno effect (defined below). Quantum measurement theory is introduced in Chap. 1, using the terminology of effects and operations. This approach allows an operational definition of such terms as a state vector, an ensemble, and a measurement device (for instance), and a consideration of interactions between quantum systems and inaccurate measurement devices. We further introduce the quantum trajectories approach to consider the evolution of an individual quantum system subject to measurement. The quantum Zeno effect is introduced in Chap. 2. Any quantum treatment of a measurement interaction must consider the measurement backaction onto the measured system and this backaction will disrupt the free evolution of the system. The quantum Zeno effect occurs in the strong measurement limit where the measurement backaction totally freezes the evolution of the system, thus rendering the measurement useless. The effect is introduced via projective measurements of two level systems subject to measurement of level populations. At this stage we are able to discuss the main questions addressed by this thesis, and present its structure in Chap. 2. We then develop a new measurement model for the interaction between a system and a measurement device in Chap. 3. Our motivation in doing this is to better model the usual laboratory meter, and in our approach the meter dynamics are such that it relaxes towards an appropriate readout of the system parameter of interest. The irreducible quantum noise of the meter introduces fluctuations that drive the stochastic dynamical collapse of the system wavefunction. In our model, the measured system dynamics (if treated selectively) are described by a stochastic, nonlinear Schroedinger equation. A double well system subject to position measurement provides a natural first application for this model. This is done in Chap. 4 where we monitor the coherent tunnelling of a particle from one well to the other. The advantage afforded by considering this system is that it displays differing regimes where the measurement observable (position) is approximated as possessing either, respectively, a continuous or a discrete eigenvalue structure. Thus, we use this one model to explore the quantum Zeno effect in both measurement regimes. The above treatment is of a theoretical measurement model. In Chap. 5 we turn to consider a recent experimental test of the quantum Zeno effect which examined the dynamics of a two level atom subject to pulsed measurements of atomic level populations. We treat a slightly modified experiment in a fully continuous measurement regime. By first unravelling the optical Bloch equations, and second, using the quantum trajectories approach we demonstrate the existence of certain measurement regimes where there is a quantum Zeno effect, and other regimes where no measurement of the atomic populations is being effected at all. Through these results we demonstrate the importance of making a full analysis of the system-detector interaction before any conclusions can be made. In the remainder of the thesis we propose further possible tests of the quantum Zeno effect. In Chap. 6 the evolution of a Rydberg atom exchanging one photon with a single cavity mode subject to measurement is examined. The measurement is made by monitoring the photon number occupancy of the cavity mode using a beam of Rydberg atoms configured so as to perform phase sensitive detection. In the limit of frequent monitoring we show that the free oscillation of the atomic inversion is disrupted, and the atom is trapped close to its initial state. This is the quantum Zeno effect. In Chap. 7 we realize the Zeno effect on two possible systems. We consider first, a two level Jaynes-Cumming atom interacting with a cavity mode, and second, two electromagnetic modes configured as a multi-level parametric frequency converter. These systems interact with another cavity mode via a quadratic coupling system based on four wave mixing, and constructed to be a quantum nondemolition measurement of the photon number. This mode is damped to the environment thus effecting a measurement of the system populations. Again we show that this interaction, can manifest the quantum Zeno effect. Our explicit modelling of the system-detector interaction enables us to show how the effect depends on the resolution time of the detector. Finally, we consider a proposed measurement of the square of the quadrature phase of an electromagnetic mode in Chap. 8. Here, a three mode interaction mediated by a second order nonlinear susceptibility is considered. One mode, the pump, is prepared in a feedback generated photon number state to give insight into the role of pump noise. The other two modes are treated as an angular momentum system, and we show that photon counting on the two mode rotation system effects the above mentioned measurement. In addition, this measurement provides a direct measure of the second order squeezing of the signal. With that we finish our investigation of the quantum Zeno effect using the techniques of quantum measurement theory. However, in the epilogue [Chap. 9] we note that no thesis in quantum measurement theory would be complete without some consideration of the ``meaning attributed to the theory. In the epilogue we take a novel historical approach and examine the method by which metaphysical theories are formed to draw conclusions regarding quantum metaphysics.
The emergence of classical behavior in quantum theory is often ascribed to the interaction of a quantum system with its environment, which can be interpreted as environmental monitoring of the system. As a result, off-diagonal elements of the density matrix of the system are damped in the basis of a preferred observable, often taken to be the position, leading to the phenomenon of decoherence. This effect can be modeled dynamically in terms of a Lindblad equation driven by the position operator. Here the question of decoherence resulting from a monitoring of position and momentum, i.e., a phase-space measurement, by the environment is addressed. There is no standard quantum observable corresponding to the detection of phase-space points, which is forbidden by Heisenberg's uncertainty principle. This issue is addressed by use of a coherent-state-based positive operator-valued measure for modeling phase-space monitoring by the environment. In this scheme, decoherence in phase space implies the diagonalization of the density matrix in both position and momentum representations. This is shown to be linked to a Lindblad equation where position and momentum appear as two independent Lindblad operators.
Measurements in the quantum domain can exceed classical notions. This concerns fundamental questions about the nature of the measurement process itself, as well as applications, such as their function as building blocks of quantum information processing protocols. In this paper we explore the notion of entanglement for detection devices in theory and experiment. A method is devised that allows one to determine nonlocal quantum coherence of positive-operator-valued measures via negative contributions in a joint distribution that fully describes the measurement apparatus under study. This approach is then applied to experimental data for detectors that ideally project onto Bell states. In particular, we describe the reconstruction of the aforementioned entanglement quasidistributions from raw data and compare the resulting negativities with those expected from theory. Therefore, our method provides a versatile toolbox for analyzing measurements regarding their quantum-correlation features for quantum science and quantum technology.
The measurement process of observables in a quantum system comes out to be an unsovable problem which started in the early times of the development of the theory. In the present note we consider the measured system part of an open system interacting with the measuring device and show under which ideal conditions the measure process may ideally work. Our procedure leads to the conclusion that there is no hope that any experimental procedure will be able to lead to a clean solution of the process, except maybe in very specific cases. The reasons for this situation are deeply rooted in the fundamental properties of quantum theory.
Unitary evolution and projective measurement are fundamental axioms of quantum mechanics. Even though projective measurement yields one of the eigenstates of the measured operator as the outcome, there is no theory that predicts which eigenstate will be observed in which experimental run. There exists only an ensemble description, which predicts probabilities of various outcomes over many experimental runs. We propose a dynamical evolution equation for the projective collapse of the quantum state in individual experimental runs, which is consistent with the well-established framework of quantum mechanics. In case of gradual weak measurements, its predictions for ensemble evolution are different from those of the Born rule. It is an open question whether or not suitably designed experiments can observe this alternate evolution.