Measurements in the quantum domain can exceed classical notions. This concerns fundamental questions about the nature of the measurement process itself, as well as applications, such as their function as building blocks of quantum information processing protocols. In this paper we explore the notion of entanglement for detection devices in theory and experiment. A method is devised that allows one to determine nonlocal quantum coherence of positive-operator-valued measures via negative contributions in a joint distribution that fully describes the measurement apparatus under study. This approach is then applied to experimental data for detectors that ideally project onto Bell states. In particular, we describe the reconstruction of the aforementioned entanglement quasidistributions from raw data and compare the resulting negativities with those expected from theory. Therefore, our method provides a versatile toolbox for analyzing measurements regarding their quantum-correlation features for quantum science and quantum technology.
Measurements in the quantum domain can exceed classical notions. This concerns fundamental questions about the nature of the measurement process itself, as well as applications, such as their function as building blocks of quantum information processing protocols. In this paper we explore the notion of entanglement for detection devices in theory and experiment. A method is devised that allows one to determine nonlocal quantum coherence of positive-operator-valued measures via negative contributions in a joint distribution that fully describes the measurement apparatus under study. This approach is then applied to experimental data for detectors that ideally project onto Bell states. In particular, we describe the reconstruction of the aforementioned entanglement quasidistributions from raw data and compare the resulting negativities with those expected from theory. Therefore, our method provides a versatile toolbox for analyzing measurements regarding their quantum-correlation features for quantum science and quantum technology.
Quantum theory admits correlations between distant parties that are stronger than those permitted by classical physics. Such correlations, which are termed nonlocal, have been studied extensively since their discovery by John Bell in 1964. This thesis makes progress on various aspects of quantum nonlocality both from a foundational and practical perspective. We begin by studying a foundational question on the relationship between nonlocality and quantum entanglement. We show that the strongest form of nonlocality, also called pseudo-telepathy or full nonlocality, can be demonstrated by non-maximally entangled states and prove that all pure entangled states can demonstrate full nonlocality in the many-copy scenario. We also provide non-trivial examples of fully nonlocal mixed states. We then turn to the study of another phenomenon in quantum theory which is essential in almost all demonstrations of non-classicality—measurement incompatibility. We generalise the notion of measurement incompatibility and show that our notion has strong operational relevance: it captures the randomness in the outcomes of an untrusted measurement device against a classical adversary. We use our formalism to derive new bounds on the experimental losses and noise that can be tolerated in quantum communication protocols before they become insecure. We then begin a systematic study of routed Bell experiments, a variant of standard Bell experiments that was introduced to demonstrate nonlocality over long distances in the presence of losses and noise. We formalize the notion of genuine long-range quantum correlations in routed Bell experiments and develop numerical and analytical tools to characterize them. We show that routed Bell experiments allow for the demonstration of long-range quantum correlations at arbitrarily large distances using only entangled qubit states. We then prove the security of fully device-independent (DI) quantum key distribution (QKD) protocols based on routed Bell tests and quantify the resulting improvement in key rate and distance compared to standard DI QKD protocols.
There always exists an entanglement witness for every entangled quantum state. Negativity of the expectation value of an entanglement witness operator guarantees entanglement of the corresponding state, given that the measurement devices involved are perfect, i.e., the performed measurements actually constitute the witness operator for the state under consideration. In a realistic situation, there are two possible ways of measurements to drive the process away from the ideal one. First, wrong measurements may be performed, and, second, while the measurement operators are implemented correctly, the detection process may be noisy. Entanglement witnesses are prone to both of these imperfections. The concept of measurement-device-independent entanglement witnesses was introduced to remove the first problem. We analyze the ``detection loophole'' in the context of measurement-device-independent entanglement witnesses, which deal with the second problem of imprecise measurements. We obtain an upper bound, a threshold value, on the entanglement witness function in the measurement-device-independent entanglement witness scenario, below which entanglement is guaranteed for given nonideal detector efficiencies, that can involve both lost events and dark counts. We also present a threshold value on the function in the ``worst-case scenario'' where the threshold of the witness operator for guaranteeing entanglement assumes its maximal negative value.
Measurements are a fundamental cornerstone of physics, and in quantum science they play a uniquely central role from both foundational and technological perspectives.It is through measurements that we interact with nature: the way we probe a system determines which properties become accessible, and how they can subsequently be exploited.In quantum mechanics (QM), a measurement is not merely a passive readout of a pre-existing property; it is an active process that, through unavoidable back-action, can shape the very phenomena observed and change the state of the system.From a metrological perspective, the emphasis thus shifts to how measurements are implemented and performed, so that quantum states and correlations can be characterized, verified, and ultimately exploited in ways that are both minimally invasive and practically useful across platforms and networked scenarios.In this work, we take this need as our guiding objective: to turn the study of quantum measurements and resources into concrete, reproducible methods enabling access, characterization and protection of quantum states under realistic conditions.After a brief introduction on QM and related quantum technologies (Chapter 1), Chapter 2 presents a weak measurement (WM) scheme to perform multiple noncommuting measurements on entangled systems without altering their state, a task usually forbidden by the traditional quantum measurement paradigms.A WM is a low-intensity interaction between a quantum system and a measuring device, allowing to extract limited information while keeping the state largely intact.We exploit this property of WMs to realize the first estimation of the entire Bell parameter on a single entangled-photon pair, a task intrinsically forbidden in traditional (projective) quantum measurement frameworks, opening new paths in the field of quantum state estimation.Then, with the same method, we perform the first experimental test of the recently-introduced Relativistic Independence principle, showing how the measurement choice can limit the access to local and nonlocal correlations, demonstrating an interplay and balance between the two.Moreover, we illustrate that, with this scheme, one can access the outcome probabilities for the full set of observables in a Bell test, showing that some probabilities can become intrinsically negative.These works defy traditional, textbook QM paradigms, showing that quantum correlations can be estimated almost
This thesis is concerned with the generation of non-classical quantum states of light, the photon-level manipulation of quantum states and the accurate tomography of both quantum states and quantum processes. In optics, quantum information can be encoded and processed in both discrete and continuous variables. Hybrid approaches combining for example homodyne detection with conditional state preparation and manipulation are gaining increasing prominence. The development and characterization of a time-domain balanced homodyne detector (BHD) is presented. The detector has a bandwidth of 80 MHz, a signal-to-noise ratio of 14.5 dB and an efficiency of 86% making it well-suited to pulse-to-pulse measurement of quantum optical states. The BHD is employed to perform quantum state tomography (QST) of non-classical multi-photon Fock states generated by spontaneous parametric down-conversion. A detailed investigation of the mode-matching between the local oscillator used for homodyne detection and the generated Fock states is presented. The one-, two- and three-photon Fock states are reconstructed with a combined preparation and detection efficiency exceeding 50%. Fock states have a number of applications in quantum state engineering, where non-classical ancilla states and conditional measurements enable photon-level manipulation of quantum states. Fock state filtration (FSF) is investigated - an example of a post-selected beam splitter which is a basic building block for many quantum state engineering protocols. A model is developed incorporating the effect of experimental imperfections. An experimental implementation of a Fock state filter is fully characterized by means of coherent-state quantum process tomography (QPT). The reconstructed process is found to be consistent with the model. The filter preferentially removes the single-photon component from an arbitrary input quantum state. Calibration of optical detectors in the quantum regime is discussed. Quantum detector tomography (QDT) is reviewed and contrasted with a new technique for performing QST with a calibrated detector known as the fitting of data patterns (FDP). The first experimental characterization of a BHD is performed by probing the detector with phase-averaged coherent states. The FDP method is shown to be applicable to the estimation of quantum processes, where a detector response is not assumed - thus demonstrating the versatility of the FDP approach as a new method in the quantum tomography toolbox.
Despite the success of quantum mechanics in predicting the outcomes of experiments in many branches of physics, the foundations of the theory have remained subject of research and dispute. At the basis of this struggle with the theory lie the phenomena of nonlocality and entanglement. Since it was first predicted by Bell in 1964, nonlocality was not only verified in numerous experiments, but also identified as a useful resource for quantum information processing. Thus, the study of nonlocality is important both from a fundamental point of view and with respect to new applications in quantum information theory, such as secure cryptography and randomness generation. The identification of entanglement as a resource for quantum information led to a strong theoretical effort devoted to its characterisation and detection. Many of the resulting mathematical tools find application in several domains of physics. Although the only known way to create nonlocal correlations is to measure entangled quantum systems, it has been shown that entanglement and nonlocality constitute two inequivalent properties. Therefore, in the light of the success of entanglement theory, it is of interest to also devise a resource theory of nonlocality. The task of this thesis is to develop such a theoretical framework for the characterisation of nonlocality as a resource. To gain a better understanding of nonlocal correlations it will be necessary to investigate correlation scenarios that go beyond the situation originally considered by Bell. In doing so, this thesis provides new description of nonlocality that also have implications for the characterisation of quantum correlations and the detection of new forms of nonlocality. The first question we address is how nonlocality can consistently be defined in a scenario of arbitrarily many parties that may collaborate among each other. To this end we recognise which are the allowed physical operations in this situation and then define nonlocality as the resource that cannot be created by these operations. Our approach shows that the conventional definition of multipartite nonlocality, adopted by the community so far, is inconsistent with this operational definition; we further propose and analyse new models that do not suffer from these inconsistencies. Furthermore, we show that our findings have implications for the characterisation of quantum correlations. A recent approach to describe the set of quantum correlation consists in using principles inspired from information theory. By using a special instance of the models we defined earlier we show a fundamental limitation of this approach: no bipartite information principle is sufficient to single out the set of quantum correlations from the set of nonsignalling correlations. We then developed a description of nonlocality in an even more generalised scenario of several parties. Motivated by a result of Popescu we study scenarios where the parties are allowed to perform not only a single but sequences of measurements on their systems. Characterising nonlocality also in this scenario in operational terms and defining local models compatible with this definition, we show that a new form of nonlocality can be detected Lastly, we examine the problem of detecting the presence of nonlocality in a multipartite scenario when one is given only partial access to the global system. We find that one can verify that the total system must display nonlocality, even though the accessible subsystems only exhibit local correlations.