Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1512.02396 · Review of Scientific Instruments

Note: Ultra-low birefringence dodecagonal vacuum glass cell

Stefan Brakhane, Wolfgang Alt, Dieter Meschede, Carsten Robens, Geol Moon, Andrea Alberti

Published Dec 1, 2015• 6 citations
arXivHTMLPDF

Abstract

We report on an ultra-low birefringence dodecagonal glass cell for ultra-high vacuum applications. The epoxy-bonded trapezoidal windows of the cell are made of SF57 glass, which exhibits a very low stress-induced birefringence. We characterize the birefringence Δn of each window with the cell under vacuum conditions, obtaining values around 10(-8). After baking the cell at 150 °C, we reach a pressure below 10(-10) mbar. In addition, each window is antireflection coated on both sides, which is highly desirable for quantum optics experiments and precision measurements.

DOI
10.1063/1.4938281

Related papers

MACOR glass-ceramic based UHV cell for quantum technology applications

M. Proske, S. Boles-Herresthal, D. Latorre-Bastidas +6 more

Compact, customizable, non-magnetic vacuum systems are a key requirement for many field applications of quantum technology based on cold atoms. We report on the development and construction of a compact, low-cost ultra-high vacuum compatible cell using the glass-ceramic MACOR. The cell offers a CF flange connection to commercial vacuum technology, as well as high numerical aperture viewports for precision optical measurements. The presented technology shows stable vacuum pressures of $< 1 \cdot 10^{-10}$ mbar for more than a year since the implementation into the vacuum system of a quantum gas experiment, further proving suitability for general quantum technology applications.

quant-pharXiv:2603.15444•Applied Physics Letters•Mar 17, 2026•0 citations

Antireflection coatings for an ultra-high vacuum quartz cell developed for quantum computing experiments

Ulrike Schulz, Friedrich Rickelt, Nancy Gratzke +4 more

The paper discusses requirements and solutions for antireflection coatings applicable for a fused silica cell which is attended to manipulate Rydberg atoms as qubits. Multiple laser beams at various wavelengths and light incidence angles pass the different window areas of the cell. AR-coatings were designed and deposited on the window areas to receive an optimal solution for each of the lasers. Some of the coatings optimized for the internal surfaces of the cell contain nanostructured layers as an option to improve the polarization properties at higher light incidence angles. Cleaning, handling and outgassing of these layers was investigated in particular.

Advances in Optical Thin Films•Jun 17, 2024•0 citations

Spectroscopic study of a diffusion-bonded sapphire cell for hot metal vapors

Naota Sekiguchi, Takumi Sato, Kiyoshi Ishikawa +1 more

Characteristics of a diffusion-bonded sapphire cell for optical experiments with hot metal vapors were investigated. The sapphire cell consisted of sapphire-crystal plates and a borosilicate-glass tube, which were bonded to each other by diffusion bonding without any binders or glues. The glass tube was attached to a vacuum manifold using the standard method applied in glass processing, filled with a small amount of Rb metal by chasing with a torch, and then sealed. The cell was baked at high temperatures, and optical experiments were then performed using rubidium atoms at room temperature. The sapphire cell was found to be vacuum tight, at least up to 350°C, and the sapphire walls remained clear over all temperatures. From the optical experiments, the generation of a background gas was indicated after baking at 200°C. The background gas pressure was low enough to avoid pressure broadening of absorption lines but high enough to cause velocity-changing collisions of Rb atoms. The generated gas pressure decreased at higher temperatures, probably due to chemical reactions.

arXiv:1710.08627•Applied Optics•Dec 18, 2017•11 citations

Note: In situ measurement of vacuum window birefringence by atomic spectroscopy

Andreas Steffen, Wolfgang Alt, Maximilian Genske +3 more

We present an in situ method to measure the birefringence of a single vacuum window by means of microwave spectroscopy on an ensemble of cold atoms. Stress-induced birefringence can cause an ellipticity in the polarization of an initially linearly polarized laser beam. The amount of ellipticity can be reconstructed by measuring the differential vector light shift of an atomic hyperfine transition. Measuring the ellipticity as a function of the linear polarization angle allows us to infer the amount of birefringence Δn at the level of 10(-8) and identify the orientation of the optical axes. The key benefit of this method is the ability to separately characterize each vacuum window, allowing the birefringence to be precisely compensated in existing vacuum apparatuses.

arXiv:1308.4959•Review of Scientific Instruments•Dec 1, 2013•21 citations

Birefringent Cavity for CQED

Yat Shan Au

By trapping a single atom in a Fabry-Perot cavity, we can realize strong coupling between the atom and the electromagnetic field, which may in the future be utilized to perform quantum gates in quantum computing. Previous experiments with Cesium atoms at the Caltech Quantum Optics group achieved a trapping time of 3 seconds, and they led to a detailed study of the atom-photon interactions known as the vacuum-Rabi splitting. It is believed that the trapping time is limited by collisions with residual gas molecules inside the vacuum chamber. I report three designs for the piezoelectric-controlled cavity mirror mount, bakeable to a temperature above 250 °C and hence more desirable for deployments in ultra-high vacuum (UHV). I also present new procedures which I have helped to develop for cavity construction and the characterization of cavities. In addition, I consider cavity birefringence, which can present complications to our experiments because a birefringent cavity supports two orthogonal, nondegenerate modes. I developed a simple model of cavity birefringence and made our first attempt to actively induce birefringence by stressing the cavity mirrors with piezoelectric materials, although we have not yet been able to demonstrate control over cavity birefringence. Nonetheless, with expected improvements in both mechanical stability of the cavity and base pressure of the system, it is hoped that a longer trapping time of 30 seconds can be achieved and that the new experiment with a single-sided cavity can lead to further studies of the dynamics of atom-photon interactions.

•Feb 13, 2018•0 citations

In Situ Measurement of Vacuum Window Birefringence using 25Mg+ Fluorescence

W. H. Yuan, Hongli Liu, Wenyu Wei +6 more

Accurate control of the polarization states of laser light is important in precision measurement experiments. In experiments involving the use of a vacuum environment, the stress-induced birefringence effect of the vacuum windows will affect the polarization states of laser light inside the vacuum system, and it is very difficult to measure and optimize the polarization states of the laser light in situ. The purpose of this protocol is to demonstrate how to optimize the polarization states of the laser light based on the fluorescence of ions in the vacuum system, and how to calculate the birefringence of vacuum windows based on azimuthal angles of external wave plates with Mueller matrix. The fluorescence of 25Mg+ ions induced by laser light that is resonant with the transition of |32P3/2,F = 4, mF = 4 → |32S1/2,F = 3, mF = 3 is sensitive to the polarization state of the laser light, and maximum fluorescence will be observed with pure circularly polarized light. A combination of half-wave plate (HWP) and quarter-wave plate (QWP) can achieve arbitrary phase retardation and is used for compensating the birefringence of the vacuum window. In this experiment, the polarization state of the laser light is optimized based on the fluorescence of 25Mg+ ion with a pair of HWP and QWP outside the vacuum chamber. By adjusting the azimuthal angles of the HWP and QWP to obtain maximum ion fluorescence, one can obtain a pure circularly polarized light inside the vacuum chamber. With the information on the azimuthal angles of the external HWP and QWP, the birefringence of the vacuum window can be determined.

Journal of Visualized Experiments•Jun 13, 2020•0 citations
We report on an ultra-low birefringence dodecagonal glass cell for ultra-high vacuum applications. The epoxy-bonded trapezoidal windows of the cell are made of SF57 glass, which exhibits a very low stress-induced birefringence. We characterize the birefringence Δn of each window with the cell under vacuum conditions, obtaining values around 10(-8). After baking the cell at 150 °C, we reach a pressure below 10(-10) mbar. In addition, each window is antireflection coated on both sides, which is highly desirable for quantum optics experiments and precision measurements.
Compact, customizable, non-magnetic vacuum systems are a key requirement for many field applications of quantum technology based on cold atoms. We report on the development and construction of a compact, low-cost ultra-high vacuum compatible cell using the glass-ceramic MACOR. The cell offers a CF flange connection to commercial vacuum technology, as well as high numerical aperture viewports for precision optical measurements. The presented technology shows stable vacuum pressures of <1⋅10−10< 1 \cdot 10^{-10}<1⋅10−10 mbar for more than a year since the implementation into the vacuum system of a quantum gas experiment, further proving suitability for general quantum technology applications.
The paper discusses requirements and solutions for antireflection coatings applicable for a fused silica cell which is attended to manipulate Rydberg atoms as qubits. Multiple laser beams at various wavelengths and light incidence angles pass the different window areas of the cell. AR-coatings were designed and deposited on the window areas to receive an optimal solution for each of the lasers. Some of the coatings optimized for the internal surfaces of the cell contain nanostructured layers as an option to improve the polarization properties at higher light incidence angles. Cleaning, handling and outgassing of these layers was investigated in particular.
Characteristics of a diffusion-bonded sapphire cell for optical experiments with hot metal vapors were investigated. The sapphire cell consisted of sapphire-crystal plates and a borosilicate-glass tube, which were bonded to each other by diffusion bonding without any binders or glues. The glass tube was attached to a vacuum manifold using the standard method applied in glass processing, filled with a small amount of Rb metal by chasing with a torch, and then sealed. The cell was baked at high temperatures, and optical experiments were then performed using rubidium atoms at room temperature. The sapphire cell was found to be vacuum tight, at least up to 350°C, and the sapphire walls remained clear over all temperatures. From the optical experiments, the generation of a background gas was indicated after baking at 200°C. The background gas pressure was low enough to avoid pressure broadening of absorption lines but high enough to cause velocity-changing collisions of Rb atoms. The generated gas pressure decreased at higher temperatures, probably due to chemical reactions.
We present an in situ method to measure the birefringence of a single vacuum window by means of microwave spectroscopy on an ensemble of cold atoms. Stress-induced birefringence can cause an ellipticity in the polarization of an initially linearly polarized laser beam. The amount of ellipticity can be reconstructed by measuring the differential vector light shift of an atomic hyperfine transition. Measuring the ellipticity as a function of the linear polarization angle allows us to infer the amount of birefringence Δn at the level of 10(-8) and identify the orientation of the optical axes. The key benefit of this method is the ability to separately characterize each vacuum window, allowing the birefringence to be precisely compensated in existing vacuum apparatuses.
By trapping a single atom in a Fabry-Perot cavity, we can realize strong coupling between the atom and the electromagnetic field, which may in the future be utilized to perform quantum gates in quantum computing. Previous experiments with Cesium atoms at the Caltech Quantum Optics group achieved a trapping time of 3 seconds, and they led to a detailed study of the atom-photon interactions known as the vacuum-Rabi splitting. It is believed that the trapping time is limited by collisions with residual gas molecules inside the vacuum chamber. I report three designs for the piezoelectric-controlled cavity mirror mount, bakeable to a temperature above 250 °C and hence more desirable for deployments in ultra-high vacuum (UHV). I also present new procedures which I have helped to develop for cavity construction and the characterization of cavities. In addition, I consider cavity birefringence, which can present complications to our experiments because a birefringent cavity supports two orthogonal, nondegenerate modes. I developed a simple model of cavity birefringence and made our first attempt to actively induce birefringence by stressing the cavity mirrors with piezoelectric materials, although we have not yet been able to demonstrate control over cavity birefringence. Nonetheless, with expected improvements in both mechanical stability of the cavity and base pressure of the system, it is hoped that a longer trapping time of 30 seconds can be achieved and that the new experiment with a single-sided cavity can lead to further studies of the dynamics of atom-photon interactions.
Accurate control of the polarization states of laser light is important in precision measurement experiments. In experiments involving the use of a vacuum environment, the stress-induced birefringence effect of the vacuum windows will affect the polarization states of laser light inside the vacuum system, and it is very difficult to measure and optimize the polarization states of the laser light in situ. The purpose of this protocol is to demonstrate how to optimize the polarization states of the laser light based on the fluorescence of ions in the vacuum system, and how to calculate the birefringence of vacuum windows based on azimuthal angles of external wave plates with Mueller matrix. The fluorescence of 25Mg+ ions induced by laser light that is resonant with the transition of |32P3/2,F = 4, mF = 4 → |32S1/2,F = 3, mF = 3 is sensitive to the polarization state of the laser light, and maximum fluorescence will be observed with pure circularly polarized light. A combination of half-wave plate (HWP) and quarter-wave plate (QWP) can achieve arbitrary phase retardation and is used for compensating the birefringence of the vacuum window. In this experiment, the polarization state of the laser light is optimized based on the fluorescence of 25Mg+ ion with a pair of HWP and QWP outside the vacuum chamber. By adjusting the azimuthal angles of the HWP and QWP to obtain maximum ion fluorescence, one can obtain a pure circularly polarized light inside the vacuum chamber. With the information on the azimuthal angles of the external HWP and QWP, the birefringence of the vacuum window can be determined.