Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1308.4959 · Review of Scientific Instruments

Note: In situ measurement of vacuum window birefringence by atomic spectroscopy

Andreas Steffen, Wolfgang Alt, Maximilian Genske, Dieter Meschede, Carsten Robens, Andrea Alberti

Published Dec 1, 2013• 21 citations
arXivHTMLPDF

Abstract

We present an in situ method to measure the birefringence of a single vacuum window by means of microwave spectroscopy on an ensemble of cold atoms. Stress-induced birefringence can cause an ellipticity in the polarization of an initially linearly polarized laser beam. The amount of ellipticity can be reconstructed by measuring the differential vector light shift of an atomic hyperfine transition. Measuring the ellipticity as a function of the linear polarization angle allows us to infer the amount of birefringence Δn at the level of 10(-8) and identify the orientation of the optical axes. The key benefit of this method is the ability to separately characterize each vacuum window, allowing the birefringence to be precisely compensated in existing vacuum apparatuses.

DOI
10.1063/1.4847075

Related papers

In Situ Measurement of Vacuum Window Birefringence using 25Mg+ Fluorescence

W. H. Yuan, Hongli Liu, Wenyu Wei +6 more

Accurate control of the polarization states of laser light is important in precision measurement experiments. In experiments involving the use of a vacuum environment, the stress-induced birefringence effect of the vacuum windows will affect the polarization states of laser light inside the vacuum system, and it is very difficult to measure and optimize the polarization states of the laser light in situ. The purpose of this protocol is to demonstrate how to optimize the polarization states of the laser light based on the fluorescence of ions in the vacuum system, and how to calculate the birefringence of vacuum windows based on azimuthal angles of external wave plates with Mueller matrix. The fluorescence of 25Mg+ ions induced by laser light that is resonant with the transition of |32P3/2,F = 4, mF = 4 → |32S1/2,F = 3, mF = 3 is sensitive to the polarization state of the laser light, and maximum fluorescence will be observed with pure circularly polarized light. A combination of half-wave plate (HWP) and quarter-wave plate (QWP) can achieve arbitrary phase retardation and is used for compensating the birefringence of the vacuum window. In this experiment, the polarization state of the laser light is optimized based on the fluorescence of 25Mg+ ion with a pair of HWP and QWP outside the vacuum chamber. By adjusting the azimuthal angles of the HWP and QWP to obtain maximum ion fluorescence, one can obtain a pure circularly polarized light inside the vacuum chamber. With the information on the azimuthal angles of the external HWP and QWP, the birefringence of the vacuum window can be determined.

Journal of Visualized Experiments•Jun 13, 2020•0 citations

In situ measurement of light polarization with ellipticity-induced nonlinear magneto-optical rotation

Derek F. Jackson Kimball, Jordan Dudley, Yan Li +1 more

A precise, accurate, and relatively straightforward in situ method to measure and control the ellipticity of light resonantly interacting with an atomic vapor is described. The technique can be used to minimize vector light shifts. The method involves measurement of ellipticity-induced resonances in the magnetic-field dependence of nonlinear magneto-optical rotation of frequency-modulated light. The light propagation direction is orthogonal to the applied magnetic field $\mathbf{B}$ and the major axis of the light polarization ellipse is along $\mathbf{B}$. When the light modulation frequency matches the Larmor frequency, elliptically polarized light produces a precessing atomic spin orientation transverse to $\mathbf{B}$ via synchronous optical pumping. The precessing spin orientation causes optical rotation oscillating at the Larmor frequency by modulating the atomic vapor's circular birefringence. Based on this technique's precision, in situ nature (which avoids systematic errors arising from optical interfaces) and independent control of the most important systematic errors, it is shown that the accuracy of light ellipticity measurements achievable with this technique can exceed that of existing methods by orders of magnitude.

arXiv:1706.08149•Physical Review A•Sep 12, 2017•15 citations

A simple method for in situ measurement of vacuum window birefringence

W. H. Yuan, Hongli Liu, W. Z. Wei +6 more

We present a simple method to measure the degrees of circular polarization (DoCP) of laser light inside a vacuum chamber and the birefringence of a vacuum window by detecting the fluorescence emitted by Doppler cooled ions in an ion trap. Imperfect laser polarization will cause ions to be pumped to the dark state which will decrease the fluorescence rates of the ions. With a simulation based on the rate equations of the relevant energy levels of 25Mg+ ions, we find that the fluorescence rate is sensitive to the DoCP of the laser. Based on the simulation result, we present a new method to optimize the DoCP of the laser inside the vacuum chamber by adjusting fast axis azimuthal angles of a half-wave plate and a quarter-wave plate outside the vacuum chamber. The laser light is optimized to be circularly polarized with an uncertainty of the DoCP of 7.8 × 10−5. With the obtained polarization information on both sides of the vacuum window and treating the vacuum window as an unknown wave plate, the phase delay and the fast axis azimuthal angle of the vacuum window can be determined in the form of Mueller matrix. The phase delay is determined to be 197.60(39)°, and the fast axis azimuthal angle is determined to be 104.00(5)°.

Review of Scientific Instruments•Nov 1, 2019•3 citations

Ramsey Imaging of Optical Traps

Gautam Ramola, Richard Winkelmann, Karthik Chandrashekara +4 more

The mapping of the potential landscape with high spatial resolution is crucial for quantum technologies based on ultracold atoms. However, the imaging of optical dipole traps is challenging because purely optical methods, commonly used to profile laser beams in free space, are not applicable in a vacuum. In this work, we demonstrate precise in situ imaging of optical dipole traps by probing a hyperfine transition with Ramsey interferometry. Thereby, we obtain an absolute map of the potential landscape with micrometer resolution and shot-noise-limited spectral precision. The idea of the technique is to control the polarization ellipticity of the trap laser beam to induce a differential light shift proportional to the trap potential. By studying the response to polarization ellipticity, we uncover a small but significant nonlinearity in addition to a dominant linear behavior, which is explained by the geometric distribution of the atomic ensemble. Our technique for imaging of optical traps can find wide application in quantum technologies based on ultracold atoms, as it applies to multiple atomic species and is not limited to a particular wavelength or trap geometry.

arXiv:2106.05871•Physical Review Applied•Aug 24, 2021•10 citations

All-Optical Control of Birefringence in a Cold Atomic Ensemble

Apoorva Apoorva, Naudson Lucas Lopes Matias, Bérengère Pinoche +3 more

We demonstrate all-optical control of birefringence in a cold atomic cloud of ytterbium. By optically dressing the excited $^{3}\mathrm{P}_1$ state via an off-resonant coupling to the $^{3}\mathrm{D}_1$ level, we induce polarization-dependent light shifts of the Zeeman sublevels, resulting in a tunable polarization-dependent refractive index. For a circularly polarized dressing beam, we observe a rotation of the probe linear polarization, characteristic of the Faraday effect, in the absence of any magnetic field. In addition, for a linearly polarized dressing beam, the probe acquires ellipticity without rotation, corresponding to linear birefringence. More generally, the polarization of the dressing beam controls the axis of rotation of the probe polarization on the Poincaré sphere. Our results establish cold atoms as a versatile platform for engineering and controlling light-induced birefringence and open new perspectives for the fast and reconfigurable control of optical response of resonant media.

arXiv:2606.30216•Jun 29, 2026•0 citations

High precision measurement of light polarization using a Cs atomic magnetometer configuration

Xinxin Peng, Yinmin Zhou, Lianhua Li +3 more

Abstract The polarization of light affected by the birefringence of optical elements, such as vapor cell walls, mirrors, and windows, may introduce systematic errors that can be minimized by precisely measuring and correcting the light polarization with a highly sensitive atomic polarimeter. In high precision measurements, it is necessary to measure the light polarization with a high precision where the light interacts with atoms. However, it is inconvenient or even impossible to use the presented method to measure the light polarization, for example, in a cell or cavity. We present a precise and relatively straightforward method to measure the light polarization based on a cesium (Cs) atomic magnetometer configuration. The pump-probe scheme is involved in our experiment. The pump light polarizes atomic spins and the probe light measures the spins polarization. The optical rotation of the probe light significantly depends on the pump light ellipticity, which can be used to measure the light polarization with a high precision. In our work, we present a method to measure the pump light ellipticity with a sensitivity of 2.1 × 10 −8 rad Hz −1/2 for linearly polarized light, which has approximately an order of magnitude improvement than previous research results.

Journal of Physics B Atomic Molecular and Optical Physics•Apr 29, 2021•3 citations
We present an in situ method to measure the birefringence of a single vacuum window by means of microwave spectroscopy on an ensemble of cold atoms. Stress-induced birefringence can cause an ellipticity in the polarization of an initially linearly polarized laser beam. The amount of ellipticity can be reconstructed by measuring the differential vector light shift of an atomic hyperfine transition. Measuring the ellipticity as a function of the linear polarization angle allows us to infer the amount of birefringence Δn at the level of 10(-8) and identify the orientation of the optical axes. The key benefit of this method is the ability to separately characterize each vacuum window, allowing the birefringence to be precisely compensated in existing vacuum apparatuses.
Accurate control of the polarization states of laser light is important in precision measurement experiments. In experiments involving the use of a vacuum environment, the stress-induced birefringence effect of the vacuum windows will affect the polarization states of laser light inside the vacuum system, and it is very difficult to measure and optimize the polarization states of the laser light in situ. The purpose of this protocol is to demonstrate how to optimize the polarization states of the laser light based on the fluorescence of ions in the vacuum system, and how to calculate the birefringence of vacuum windows based on azimuthal angles of external wave plates with Mueller matrix. The fluorescence of 25Mg+ ions induced by laser light that is resonant with the transition of |32P3/2,F = 4, mF = 4 → |32S1/2,F = 3, mF = 3 is sensitive to the polarization state of the laser light, and maximum fluorescence will be observed with pure circularly polarized light. A combination of half-wave plate (HWP) and quarter-wave plate (QWP) can achieve arbitrary phase retardation and is used for compensating the birefringence of the vacuum window. In this experiment, the polarization state of the laser light is optimized based on the fluorescence of 25Mg+ ion with a pair of HWP and QWP outside the vacuum chamber. By adjusting the azimuthal angles of the HWP and QWP to obtain maximum ion fluorescence, one can obtain a pure circularly polarized light inside the vacuum chamber. With the information on the azimuthal angles of the external HWP and QWP, the birefringence of the vacuum window can be determined.
A precise, accurate, and relatively straightforward in situ method to measure and control the ellipticity of light resonantly interacting with an atomic vapor is described. The technique can be used to minimize vector light shifts. The method involves measurement of ellipticity-induced resonances in the magnetic-field dependence of nonlinear magneto-optical rotation of frequency-modulated light. The light propagation direction is orthogonal to the applied magnetic field B\mathbf{B}B and the major axis of the light polarization ellipse is along B\mathbf{B}B. When the light modulation frequency matches the Larmor frequency, elliptically polarized light produces a precessing atomic spin orientation transverse to B\mathbf{B}B via synchronous optical pumping. The precessing spin orientation causes optical rotation oscillating at the Larmor frequency by modulating the atomic vapor's circular birefringence. Based on this technique's precision, in situ nature (which avoids systematic errors arising from optical interfaces) and independent control of the most important systematic errors, it is shown that the accuracy of light ellipticity measurements achievable with this technique can exceed that of existing methods by orders of magnitude.
We present a simple method to measure the degrees of circular polarization (DoCP) of laser light inside a vacuum chamber and the birefringence of a vacuum window by detecting the fluorescence emitted by Doppler cooled ions in an ion trap. Imperfect laser polarization will cause ions to be pumped to the dark state which will decrease the fluorescence rates of the ions. With a simulation based on the rate equations of the relevant energy levels of 25Mg+ ions, we find that the fluorescence rate is sensitive to the DoCP of the laser. Based on the simulation result, we present a new method to optimize the DoCP of the laser inside the vacuum chamber by adjusting fast axis azimuthal angles of a half-wave plate and a quarter-wave plate outside the vacuum chamber. The laser light is optimized to be circularly polarized with an uncertainty of the DoCP of 7.8 × 10−5. With the obtained polarization information on both sides of the vacuum window and treating the vacuum window as an unknown wave plate, the phase delay and the fast axis azimuthal angle of the vacuum window can be determined in the form of Mueller matrix. The phase delay is determined to be 197.60(39)°, and the fast axis azimuthal angle is determined to be 104.00(5)°.
The mapping of the potential landscape with high spatial resolution is crucial for quantum technologies based on ultracold atoms. However, the imaging of optical dipole traps is challenging because purely optical methods, commonly used to profile laser beams in free space, are not applicable in a vacuum. In this work, we demonstrate precise in situ imaging of optical dipole traps by probing a hyperfine transition with Ramsey interferometry. Thereby, we obtain an absolute map of the potential landscape with micrometer resolution and shot-noise-limited spectral precision. The idea of the technique is to control the polarization ellipticity of the trap laser beam to induce a differential light shift proportional to the trap potential. By studying the response to polarization ellipticity, we uncover a small but significant nonlinearity in addition to a dominant linear behavior, which is explained by the geometric distribution of the atomic ensemble. Our technique for imaging of optical traps can find wide application in quantum technologies based on ultracold atoms, as it applies to multiple atomic species and is not limited to a particular wavelength or trap geometry.
We demonstrate all-optical control of birefringence in a cold atomic cloud of ytterbium. By optically dressing the excited 3P1^{3}\mathrm{P}_13P1​ state via an off-resonant coupling to the 3D1^{3}\mathrm{D}_13D1​ level, we induce polarization-dependent light shifts of the Zeeman sublevels, resulting in a tunable polarization-dependent refractive index. For a circularly polarized dressing beam, we observe a rotation of the probe linear polarization, characteristic of the Faraday effect, in the absence of any magnetic field. In addition, for a linearly polarized dressing beam, the probe acquires ellipticity without rotation, corresponding to linear birefringence. More generally, the polarization of the dressing beam controls the axis of rotation of the probe polarization on the Poincaré sphere. Our results establish cold atoms as a versatile platform for engineering and controlling light-induced birefringence and open new perspectives for the fast and reconfigurable control of optical response of resonant media.
Abstract The polarization of light affected by the birefringence of optical elements, such as vapor cell walls, mirrors, and windows, may introduce systematic errors that can be minimized by precisely measuring and correcting the light polarization with a highly sensitive atomic polarimeter. In high precision measurements, it is necessary to measure the light polarization with a high precision where the light interacts with atoms. However, it is inconvenient or even impossible to use the presented method to measure the light polarization, for example, in a cell or cavity. We present a precise and relatively straightforward method to measure the light polarization based on a cesium (Cs) atomic magnetometer configuration. The pump-probe scheme is involved in our experiment. The pump light polarizes atomic spins and the probe light measures the spins polarization. The optical rotation of the probe light significantly depends on the pump light ellipticity, which can be used to measure the light polarization with a high precision. In our work, we present a method to measure the pump light ellipticity with a sensitivity of 2.1 × 10 −8 rad Hz −1/2 for linearly polarized light, which has approximately an order of magnitude improvement than previous research results.