Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1511.04159 · Optica

Thick-crystal regime in photon pair sources

Brigitta Septriani, James A. Grieve, Kadir Durak, Alexander Ling

Published Mar 18, 2016• 20 citations
arXivHTMLPDF

Abstract

We present comprehensive measurement data on the pump and collection beam parameters necessary to achieve high collection efficiency ($89.0 \pm 1.7 \%$) together with high brightness when a single $β$-Barium Borate crystal is operated in the thick-crystal regime and pumped with a narrow linewidth laser source. Spectral analysis of the collinear, non-degenerate photons suggest that the effective interaction length within the crystal is dominated by the collection beam mode and the use of longer crystals with increased spatial walk-off does not necessarily lead to a reduced collection efficiency. This result is an important consideration for optical designers who seek to develop practical photon pair sources.

DOI
10.1364/optica.3.000347

Related papers

Thick-crystal regime in photon pair sources

Brigitta Septriani, Kadir Durak, James A. Grieve +1 more

We present a thorough exploration of photon pair sources built around thick crystals, achieving concurrently high brightness and efficiency, despite pump beam walk-off. This surprising result is important when designing practical sources.

Frontiers in Optics•Jan 1, 2016•1 citation

The analysis of photon pair source at telecom wavelength based on the BBO crystal (Conference Presentation)

Andrzej Gajewski, Piotr Leszek Kolenderski

There are several problems that must be solved in order to increase the distance of quantum communication protocols based on photons as an information carriers. One of them is the dispersion, whose effects can be minimized by engineering spectral properties of transmitted photons. In particular, it is expected that positively correlated photon pairs can be very useful. We present the full characterization of a source of single photon pairs at a telecom wavelength based on type II spontaneous parametric down conversion (SPDC) process in a beta-barium borate (BBO) crystal. In the type II process, a pump photon, which is polarized extraordinarily, splits in a nonlinear medium into signal and idler photons, which are polarized perpendicularly to each other. In order for the process to be efficient a phase matching condition must be fulfilled. These conditions originate from momentum and energy conservation rules and put severe restrictions on source parameters. Seemingly, these conditions force the photon pair to be negatively correlated in their spectral domain. However, it is possible to achieve positive correlation for pulsed pumping. The experimentally available degrees of freedom of a source are the width of the pumping beam, the collected modes’ widths, the length of the nonlinear crystal and the duration of the pumping pulse. In our numerical model we use the following figures of merit: the pair production rate, the efficiency of photon coupling into a single mode fiber, the spectral correlation of the coupled photon pair. The last one is defined as the Pearson correlation parameter for a joint spectral distribution. The aim here is to find the largest positive spectral correlation and the highest coupling efficiency. By resorting to the numerical model Ref. [1] we showed in Ref. [2], that by careful adjustment of the pump’s and the collected modes’ characteristics, one can optimize any of the source's parameters. Our numerical outcomes conform to the experimental results presented in Refs [3,4]. Here we investigate typical, experimentally available source parameters: the widths of the pump beam and collected modes ranging from 20μm to 500m, the crystal length ranging from 1mm to 7.5mm while the pulse duration is set to 50fs, 100fs or 150fs. We achieve the correlation coefficient value as high as approximately 0.8, or – for different values of parameters – coupling efficiency equal to 0.76.

•Dec 7, 2016•0 citations

Optimizing the coupling efficiency of spontaneous parametric down-conversion photon pairs into single-mode fibers

Nicolas Schwaller, Geobae Park, Ryo Okamoto +1 more

Both correlated-mode coupling efficiency and photon pair flux (brightness) of spontaneous parametric down-conversion (SPDC) coupled into single-mode fibers are key parameters for various quantum information science applications. We present an experimental investigation on the optimization of the correlated-mode coupling efficiency and the brightness of frequency-degenerated SPDC photon pairs into single-mode optical fibers. Using photon pairs generated from a type-I phase-matched bulk $\ensuremath{\beta}$-barium borate crystal pumped by a continuous-wave laser, we carefully evaluated both the correlated-mode coupling efficiency and the brightness of SPDC light coupled to a single-mode optical fiber, while continuously changing the focusing of the pump and collection modes, experimenting with Rayleigh lengths from 3 to 280 (for the pump) and 0.2 to 20 (for the collection) times the crystal length. The measured data suggest that the correlated-mode coupling efficiency can be close to unity for any pump focus, however, the optimal Rayleigh length of the collection mode depends on the pump focus parameter, and the brightness can be increased by tightening the pump focus, provided that the Rayleigh length of the collection mode is precisely adjusted. A maximal correlated-mode coupling efficiency of $99.0\ifmmode\pm\else\textpm\fi{}1.3%$ was experimentally achieved. These results will be useful for photonic quantum science and technology using SPDC sources with high heralding efficiencies.

Physical Review A•Oct 28, 2022•9 citations

Experimental entangled photon pair generation using crystals with parallel optical axes

Aitor Villar, Alexander Lohrmann, Alexander Ling

We present an optical design where polarization-entangled photon pairs are generated within two β-Barium Borate crystals whose optical axes are parallel. This design increases the spatial mode overlap of the emitted photon pairs enhancing single mode collection without the need for additional spatial walk-off compensators. The observed photon pair rate is at least 65 000 pairs/s/mW with a quantum state fidelity of 99.53 ± 0.22% when pumped with an elliptical spatial profile.

arXiv:1711.01045•Optics Express•Apr 30, 2018•41 citations

On the measurement of two-photon single-mode coupling efficiency in parametric down-conversion photon sources

Stefania Castelletto, Ivo Pietro Degiovanni, Alan L. Migdall +1 more

Photon-based quantum information schemes have increased the need for light sources that produce individual photons, with many such schemes relying on optical parametric down-conversion (PDC). Practical realizations of this technology require that the PDC light be collected into a single spatial mode defined by an optical fibre. We present two possible models to describe single-mode fibres coupling with PDC light fields in a non-collinear configuration, that lead to two different results. These approaches include factors such as crystal length and walk-off, non-collinear phase-matching and transverse pump field distribution. We propose an experimental test to distinguish between the two. The goal is to help clarify open issues, such as how to extend the theory beyond the simplest experimental arrangements and, more importantly, to suggest ways to improve the collection efficiency.

New Journal of Physics•Jul 30, 2004•29 citations

Generating entangled photon pairs in a parallel crystal geometry

Aitor Villar, Alexander Lohrmann, Alexander Ling

We present recent findings towards developing brighter entangled photon sources in critically phase matched (CPM) nonlinear crystals. Specifically, we use type-I collinear phase matching at non-degenerate wavelengths in parallel β-Barium Borate (BBO) crystals to generate pairs of polarization entangled photons for free-space quantum key distribution (QKD). We first review the entangled source configuration and then discuss ways to further improve the source brightness by means of tailoring the pump and collection modes. We present preliminary results that may lead to brighter entangled photon sources that are intrinsically robust to changes in their environment.

arXiv:1805.11809•SPIE Quantum Technologies•May 21, 2018•2 citations
We present comprehensive measurement data on the pump and collection beam parameters necessary to achieve high collection efficiency (89.0±1.7%89.0 \pm 1.7 \%89.0±1.7%) together with high brightness when a single βββ-Barium Borate crystal is operated in the thick-crystal regime and pumped with a narrow linewidth laser source. Spectral analysis of the collinear, non-degenerate photons suggest that the effective interaction length within the crystal is dominated by the collection beam mode and the use of longer crystals with increased spatial walk-off does not necessarily lead to a reduced collection efficiency. This result is an important consideration for optical designers who seek to develop practical photon pair sources.
There are several problems that must be solved in order to increase the distance of quantum communication protocols based on photons as an information carriers. One of them is the dispersion, whose effects can be minimized by engineering spectral properties of transmitted photons. In particular, it is expected that positively correlated photon pairs can be very useful. We present the full characterization of a source of single photon pairs at a telecom wavelength based on type II spontaneous parametric down conversion (SPDC) process in a beta-barium borate (BBO) crystal. In the type II process, a pump photon, which is polarized extraordinarily, splits in a nonlinear medium into signal and idler photons, which are polarized perpendicularly to each other. In order for the process to be efficient a phase matching condition must be fulfilled. These conditions originate from momentum and energy conservation rules and put severe restrictions on source parameters. Seemingly, these conditions force the photon pair to be negatively correlated in their spectral domain. However, it is possible to achieve positive correlation for pulsed pumping. The experimentally available degrees of freedom of a source are the width of the pumping beam, the collected modes’ widths, the length of the nonlinear crystal and the duration of the pumping pulse. In our numerical model we use the following figures of merit: the pair production rate, the efficiency of photon coupling into a single mode fiber, the spectral correlation of the coupled photon pair. The last one is defined as the Pearson correlation parameter for a joint spectral distribution. The aim here is to find the largest positive spectral correlation and the highest coupling efficiency. By resorting to the numerical model Ref. [1] we showed in Ref. [2], that by careful adjustment of the pump’s and the collected modes’ characteristics, one can optimize any of the source's parameters. Our numerical outcomes conform to the experimental results presented in Refs [3,4]. Here we investigate typical, experimentally available source parameters: the widths of the pump beam and collected modes ranging from 20μm to 500m, the crystal length ranging from 1mm to 7.5mm while the pulse duration is set to 50fs, 100fs or 150fs. We achieve the correlation coefficient value as high as approximately 0.8, or – for different values of parameters – coupling efficiency equal to 0.76.
Both correlated-mode coupling efficiency and photon pair flux (brightness) of spontaneous parametric down-conversion (SPDC) coupled into single-mode fibers are key parameters for various quantum information science applications. We present an experimental investigation on the optimization of the correlated-mode coupling efficiency and the brightness of frequency-degenerated SPDC photon pairs into single-mode optical fibers. Using photon pairs generated from a type-I phase-matched bulk $\ensuremath{\beta}$-barium borate crystal pumped by a continuous-wave laser, we carefully evaluated both the correlated-mode coupling efficiency and the brightness of SPDC light coupled to a single-mode optical fiber, while continuously changing the focusing of the pump and collection modes, experimenting with Rayleigh lengths from 3 to 280 (for the pump) and 0.2 to 20 (for the collection) times the crystal length. The measured data suggest that the correlated-mode coupling efficiency can be close to unity for any pump focus, however, the optimal Rayleigh length of the collection mode depends on the pump focus parameter, and the brightness can be increased by tightening the pump focus, provided that the Rayleigh length of the collection mode is precisely adjusted. A maximal correlated-mode coupling efficiency of $99.0\ifmmode\pm\else\textpm\fi{}1.3%$ was experimentally achieved. These results will be useful for photonic quantum science and technology using SPDC sources with high heralding efficiencies.
Photon-based quantum information schemes have increased the need for light sources that produce individual photons, with many such schemes relying on optical parametric down-conversion (PDC). Practical realizations of this technology require that the PDC light be collected into a single spatial mode defined by an optical fibre. We present two possible models to describe single-mode fibres coupling with PDC light fields in a non-collinear configuration, that lead to two different results. These approaches include factors such as crystal length and walk-off, non-collinear phase-matching and transverse pump field distribution. We propose an experimental test to distinguish between the two. The goal is to help clarify open issues, such as how to extend the theory beyond the simplest experimental arrangements and, more importantly, to suggest ways to improve the collection efficiency.
We present recent findings towards developing brighter entangled photon sources in critically phase matched (CPM) nonlinear crystals. Specifically, we use type-I collinear phase matching at non-degenerate wavelengths in parallel β-Barium Borate (BBO) crystals to generate pairs of polarization entangled photons for free-space quantum key distribution (QKD). We first review the entangled source configuration and then discuss ways to further improve the source brightness by means of tailoring the pump and collection modes. We present preliminary results that may lead to brighter entangled photon sources that are intrinsically robust to changes in their environment.