We present a thorough exploration of photon pair sources built around thick crystals, achieving concurrently high brightness and efficiency, despite pump beam walk-off. This surprising result is important when designing practical sources.
We present comprehensive measurement data on the pump and collection beam parameters necessary to achieve high collection efficiency (89.0±1.7%) together with high brightness when a single β-Barium Borate crystal is operated in the thick-crystal regime and pumped with a narrow linewidth laser source. Spectral analysis of the collinear, non-degenerate photons suggest that the effective interaction length within the crystal is dominated by the collection beam mode and the use of longer crystals with increased spatial walk-off does not necessarily lead to a reduced collection efficiency. This result is an important consideration for optical designers who seek to develop practical photon pair sources.
We have developed a source of time-correlated photon pairs based on phase matched four-wave mixing in a photonic crystal fiber designed to have a zero dispersion wavelength, lambda0, close to 715nm. We generate parametric gain by pumping close to lambda0in the normal dispersion regime. By pumping with a pulsed titanium-sapphire (TI-SA) laser tuned to 708 nm we generate pair-photons at 583 nm and 900 nm visible to efficient silicon- based photon counting detectors. We can generate >100000 detected pairs per second (in a single spatial and temoral mode) with a few milli-watts of pump power. Using this source we have been able to show high visibility multi-photon interference, by mixing at a 50:50 beam-splitter, two heralded single photons generated in spatially separated micro-structured fibres. The source brightness meant we were able to measure high rates of four- photon generation and detection.