Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2106.05871 · Physical Review Applied

Ramsey Imaging of Optical Traps

Gautam Ramola, Richard Winkelmann, Karthik Chandrashekara, Wolfgang Alt, Peng Xu, Dieter Meschede, Andrea Alberti

Published Aug 24, 2021• 10 citations
arXivHTMLPDF

Abstract

The mapping of the potential landscape with high spatial resolution is crucial for quantum technologies based on ultracold atoms. However, the imaging of optical dipole traps is challenging because purely optical methods, commonly used to profile laser beams in free space, are not applicable in a vacuum. In this work, we demonstrate precise in situ imaging of optical dipole traps by probing a hyperfine transition with Ramsey interferometry. Thereby, we obtain an absolute map of the potential landscape with micrometer resolution and shot-noise-limited spectral precision. The idea of the technique is to control the polarization ellipticity of the trap laser beam to induce a differential light shift proportional to the trap potential. By studying the response to polarization ellipticity, we uncover a small but significant nonlinearity in addition to a dominant linear behavior, which is explained by the geometric distribution of the atomic ensemble. Our technique for imaging of optical traps can find wide application in quantum technologies based on ultracold atoms, as it applies to multiple atomic species and is not limited to a particular wavelength or trap geometry.

DOI
10.1103/physrevapplied.16.024041

Related papers

Atom camera: super-resolution scanning microscope of a light pattern with a single ultracold atom

Takafumi Tomita, Yuki Torii Chew, René A. Villela +6 more

Sub-micrometer light patterns play a pivotal role in biology, biophysics, and AMO physics, yet their in situ characterization is limited in spatial resolution and sensitivity. Here, we present an atom camera with a single ultracold atom in an optical tweezer as a scanning probe. Measuring the energy shift on the spin states with the long coherence time and polarization-sensitive transitions yields highly sensitive, high-resolution 2D imaging of both intensity and polarization ellipticity. We characterize the polarization of a tightly-focused beam, observing its non-trivial profile. The spatial resolution is fundamentally limited by the atom’s position uncertainty, suppressed down to quantum fluctuations (~25 nm) in the motional ground state of the tweezer, with an experimentally obtained upper bound of σ ≤ 96(4) nm. This method enables imaging beyond the diffraction limit, surpassing previous approaches limited by thermal fluctuations of the atom, and provides a powerful tool for designing and analyzing submicron-scale light patterns. In situ super-resolution imaging of light has inherent limitations when applied to the polarization profile. Here, the authors introduce an “atom camera” approach by means of a single tweezer-trapped 87Rb atom measuring the field-induced shifts at sub-micrometer steps, achieving resolution beyond the optical diffraction limit.

arXiv:2410.03241•Nature Communications•May 29, 2026•3 citations

Direct calibration of laser intensity via Ramsey interferometry for cold atom imaging

Emine Altuntaş, Ian B. Spielman

A majority of ultracold atom experiments utilize resonant absorption imaging techniques to obtain the atomic density. To make well-controlled quantitative measurements, the optical intensity of the probe beam must be precisely calibrated in units of the atomic saturation intensity I sat . In quantum gas experiments, the atomic sample is enclosed in an ultra-high vacuum system that introduces loss and limits optical access; this precludes a direct determination of the intensity. Here, we use quantum coherence to create a robust technique for measuring the probe beam intensity in units of I sat via Ramsey interferometry. Our technique characterizes the ac Stark shift of the atomic levels due to an off-resonant probe beam. Furthermore, this technique gives access to the spatial variation of the probe intensity at the location of the atomic cloud. By directly measuring the probe intensity just before the imaging sensor our method in addition yields a direct calibration of imaging system losses as well as the quantum efficiency of the sensor.

arXiv:2304.00656•Optics Express•May 4, 2023•4 citations

Ramsey Imaging of Optical Dipole Traps

Gautam Ramola

In this work, I present the experimental realization of two-dimensional state-dependent transport of cesium atoms trapped in a three-dimensional optical lattice. Leveraging the ability to state-dependently transport atoms, I demonstrate microwave photon mediated sideband cooling to the motional ground state along two dimensions. Once cooled down to the vibrational ground state, we use these atoms as sensitive probes to detect both magnetic field gradients and optical field inhomogeneities, by means of Ramsey interferometry. This enables us to perform Ramsey imaging of optical dipole traps, an essential technique which helps in the precise alignment of optical beams inside the vacuum cell. \n \nIn the first part of the thesis, I introduce the main experimental apparatus of the Discrete Quantum Simulator (DQSIM) machine, as our experiment is known, with emphasis on the technical improvements over the past few years, such as increasing the atom filling in our optical lattice from double digits to a few thousand. Using these atoms as magnetic probes, I confirm the expected magnetic shielding factor of about 2000 from the mu-metal shielding enclosing the vacuum cell. I finally discuss the control we have over the internal state of the atoms, with a measured Rabi frequency of ~200kHz. \n \nIn chapter 3, I introduce the concept of state-dependent transport, which forms the basis of most experiments planned with the DQSIM machine. I go on to discuss the polarization synthesizer, the technical backbone of the state-dependent optical lattices. The polarization synthesizer allows us to create any arbitrary polarization state of light, by independently controlling the phase and amplitude of each circular polarization component of a linearly polarized optical lattice beam. With two such polarization synthesizers implemented in the experiment, I report on the experimental realization of state-dependent transport in two dimensions. This is followed by the demonstration of microwave photon mediated ground state cooling in two dimensions, where we achieve a ground state population of about 95% along each dimension. \n \nIn the following chapter, I introduce the Ramsey spectroscopy technique, a mainstay of high precision experiments. Using Ramsey spectroscopy, I investigate some sources of dephasing in our experiment, from inhomogeneous magnetic fields to differential light shifts. Based on these Ramsey measurements, I show that we can achieve coherence times greater than a millisecond if we restrict the region of interest in our optical lattice. Exploiting the high precision Ramsey interferometry further, in chapter 5, I introduce a versatile technique for the precise in-vacuo reconstruction of optical potentials. This Ramsey imaging technique is used to image the four laser beams that form our three-dimensional lattice, helping us align them with micrometer precision. In the final chapter, I summarize the work done in this thesis and discuss some future experiments that are planned for the DQSIM machine, from plane selection to two-dimensional quantum walks.

•Sep 20, 2021•0 citations

Trapping, manipulating and probing ultracold atoms: a quantum technologies tutorial

L. Wolswijk, Luca Cavicchioli, G. Vinelli +12 more

Engineered ultracold atomic systems are a valuable platform for fundamental quantum mechanics studies and the development of quantum technologies. At near zero absolute temperature, atoms exhibit macroscopic phase coherence and collective quantum behavior, enabling their use in precision metrology, quantum simulation, and even information processing. This review provides an introductory overview of the key techniques used to trap, manipulate, and detect ultracold atoms, while highlighting the main applications of each method. We outline the principles of laser cooling, magnetic and optical trapping, and the most widely used techniques, including optical lattices and tweezers. Next, we discuss the manipulation methods of atomic internal and external degrees of freedom, and we present atom interferometry techniques and how to leverage and control interatomic interactions. Next, we review common ensemble detection strategies, including absorption and fluorescence imaging, state-selective readout, correlation and quantum non-demolition measurements and conclude with high-resolution approaches. This review aims to provide newcomers to the field with a broad understanding of the experimental toolkit that underpins research in ultracold atom physics and its applications across quantum science and technology.

arXiv:2510.20790•Oct 23, 2025•9 citations

Atom Interferometric Imaging of Differential Potentials Using an Atom Laser

Maren Mossman, Ryan Corbin, Michael McNeil Forbes +1 more

Interferometry is a prime technique for modern precision measurements. Atoms, unlike light, have significant interactions with electric, magnetic, and gravitational fields, making their use in interferometric applications particularly versatile. Here, we demonstrate atom interferometry to image optical and magnetic potential landscapes over an area exceeding 240 μm×600 μm. The differential potentials employed in our experiments generate phase imprints in an atom laser that are made visible through a Ramsey pulse sequence. We further demonstrate how advanced pulse sequences can enhance desired imaging features, e.g., to image steep potential gradients. A theoretical discussion is presented that provides a semiclassical analysis and matching numerics.

arXiv:2208.08007•Physical Review Letters•Jun 28, 2023•2 citations

In-Situ Differential-Light-Shift Cancellation for Trapped-Atom Clocks

Jan Simon Haase, Alexander Fieguth, Igor Bröckel +2 more

Differential light shifts (DLS) induced by optical trapping fields fundamentally limit the stability and accuracy of trapped-atom microwave clocks. We demonstrate an in-situ method to cancel DLS by simultaneously interrogating multiple spatially separated atomic ensembles at different trap intensities generated from a common light source. By operating the ensembles at set intensity ratios and performing Ramsey spectroscopy, the intensity-dependent frequency shifts are measured within each experimental cycle and extrapolated to the zero-intensity limit. This approach effectively enables shot-to-shot determination of a DLS-free frequency without requiring magic wavelengths or species-specific cancellation schemes. We validate the method for Rb atoms trapped in time-averaged potentials by introducing controlled variations of the total trap power and show that the extrapolated frequency remains insensitive to these fluctuations. The technique is general and can be extended to other systematic shifts, providing a scalable route toward improved stability and accuracy in compact trapped-atom clocks and related quantum sensors relying on optical dipole traps

physics.atom-phCross-listedarXiv:2603.26398•Mar 30, 2026•0 citations
The mapping of the potential landscape with high spatial resolution is crucial for quantum technologies based on ultracold atoms. However, the imaging of optical dipole traps is challenging because purely optical methods, commonly used to profile laser beams in free space, are not applicable in a vacuum. In this work, we demonstrate precise in situ imaging of optical dipole traps by probing a hyperfine transition with Ramsey interferometry. Thereby, we obtain an absolute map of the potential landscape with micrometer resolution and shot-noise-limited spectral precision. The idea of the technique is to control the polarization ellipticity of the trap laser beam to induce a differential light shift proportional to the trap potential. By studying the response to polarization ellipticity, we uncover a small but significant nonlinearity in addition to a dominant linear behavior, which is explained by the geometric distribution of the atomic ensemble. Our technique for imaging of optical traps can find wide application in quantum technologies based on ultracold atoms, as it applies to multiple atomic species and is not limited to a particular wavelength or trap geometry.
Sub-micrometer light patterns play a pivotal role in biology, biophysics, and AMO physics, yet their in situ characterization is limited in spatial resolution and sensitivity. Here, we present an atom camera with a single ultracold atom in an optical tweezer as a scanning probe. Measuring the energy shift on the spin states with the long coherence time and polarization-sensitive transitions yields highly sensitive, high-resolution 2D imaging of both intensity and polarization ellipticity. We characterize the polarization of a tightly-focused beam, observing its non-trivial profile. The spatial resolution is fundamentally limited by the atom’s position uncertainty, suppressed down to quantum fluctuations (~25 nm) in the motional ground state of the tweezer, with an experimentally obtained upper bound of σ ≤ 96(4) nm. This method enables imaging beyond the diffraction limit, surpassing previous approaches limited by thermal fluctuations of the atom, and provides a powerful tool for designing and analyzing submicron-scale light patterns. In situ super-resolution imaging of light has inherent limitations when applied to the polarization profile. Here, the authors introduce an “atom camera” approach by means of a single tweezer-trapped 87Rb atom measuring the field-induced shifts at sub-micrometer steps, achieving resolution beyond the optical diffraction limit.
A majority of ultracold atom experiments utilize resonant absorption imaging techniques to obtain the atomic density. To make well-controlled quantitative measurements, the optical intensity of the probe beam must be precisely calibrated in units of the atomic saturation intensity I sat . In quantum gas experiments, the atomic sample is enclosed in an ultra-high vacuum system that introduces loss and limits optical access; this precludes a direct determination of the intensity. Here, we use quantum coherence to create a robust technique for measuring the probe beam intensity in units of I sat via Ramsey interferometry. Our technique characterizes the ac Stark shift of the atomic levels due to an off-resonant probe beam. Furthermore, this technique gives access to the spatial variation of the probe intensity at the location of the atomic cloud. By directly measuring the probe intensity just before the imaging sensor our method in addition yields a direct calibration of imaging system losses as well as the quantum efficiency of the sensor.
In this work, I present the experimental realization of two-dimensional state-dependent transport of cesium atoms trapped in a three-dimensional optical lattice. Leveraging the ability to state-dependently transport atoms, I demonstrate microwave photon mediated sideband cooling to the motional ground state along two dimensions. Once cooled down to the vibrational ground state, we use these atoms as sensitive probes to detect both magnetic field gradients and optical field inhomogeneities, by means of Ramsey interferometry. This enables us to perform Ramsey imaging of optical dipole traps, an essential technique which helps in the precise alignment of optical beams inside the vacuum cell. \n \nIn the first part of the thesis, I introduce the main experimental apparatus of the Discrete Quantum Simulator (DQSIM) machine, as our experiment is known, with emphasis on the technical improvements over the past few years, such as increasing the atom filling in our optical lattice from double digits to a few thousand. Using these atoms as magnetic probes, I confirm the expected magnetic shielding factor of about 2000 from the mu-metal shielding enclosing the vacuum cell. I finally discuss the control we have over the internal state of the atoms, with a measured Rabi frequency of ~200kHz. \n \nIn chapter 3, I introduce the concept of state-dependent transport, which forms the basis of most experiments planned with the DQSIM machine. I go on to discuss the polarization synthesizer, the technical backbone of the state-dependent optical lattices. The polarization synthesizer allows us to create any arbitrary polarization state of light, by independently controlling the phase and amplitude of each circular polarization component of a linearly polarized optical lattice beam. With two such polarization synthesizers implemented in the experiment, I report on the experimental realization of state-dependent transport in two dimensions. This is followed by the demonstration of microwave photon mediated ground state cooling in two dimensions, where we achieve a ground state population of about 95% along each dimension. \n \nIn the following chapter, I introduce the Ramsey spectroscopy technique, a mainstay of high precision experiments. Using Ramsey spectroscopy, I investigate some sources of dephasing in our experiment, from inhomogeneous magnetic fields to differential light shifts. Based on these Ramsey measurements, I show that we can achieve coherence times greater than a millisecond if we restrict the region of interest in our optical lattice. Exploiting the high precision Ramsey interferometry further, in chapter 5, I introduce a versatile technique for the precise in-vacuo reconstruction of optical potentials. This Ramsey imaging technique is used to image the four laser beams that form our three-dimensional lattice, helping us align them with micrometer precision. In the final chapter, I summarize the work done in this thesis and discuss some future experiments that are planned for the DQSIM machine, from plane selection to two-dimensional quantum walks.
Engineered ultracold atomic systems are a valuable platform for fundamental quantum mechanics studies and the development of quantum technologies. At near zero absolute temperature, atoms exhibit macroscopic phase coherence and collective quantum behavior, enabling their use in precision metrology, quantum simulation, and even information processing. This review provides an introductory overview of the key techniques used to trap, manipulate, and detect ultracold atoms, while highlighting the main applications of each method. We outline the principles of laser cooling, magnetic and optical trapping, and the most widely used techniques, including optical lattices and tweezers. Next, we discuss the manipulation methods of atomic internal and external degrees of freedom, and we present atom interferometry techniques and how to leverage and control interatomic interactions. Next, we review common ensemble detection strategies, including absorption and fluorescence imaging, state-selective readout, correlation and quantum non-demolition measurements and conclude with high-resolution approaches. This review aims to provide newcomers to the field with a broad understanding of the experimental toolkit that underpins research in ultracold atom physics and its applications across quantum science and technology.
Interferometry is a prime technique for modern precision measurements. Atoms, unlike light, have significant interactions with electric, magnetic, and gravitational fields, making their use in interferometric applications particularly versatile. Here, we demonstrate atom interferometry to image optical and magnetic potential landscapes over an area exceeding 240 μm×600 μm. The differential potentials employed in our experiments generate phase imprints in an atom laser that are made visible through a Ramsey pulse sequence. We further demonstrate how advanced pulse sequences can enhance desired imaging features, e.g., to image steep potential gradients. A theoretical discussion is presented that provides a semiclassical analysis and matching numerics.
Differential light shifts (DLS) induced by optical trapping fields fundamentally limit the stability and accuracy of trapped-atom microwave clocks. We demonstrate an in-situ method to cancel DLS by simultaneously interrogating multiple spatially separated atomic ensembles at different trap intensities generated from a common light source. By operating the ensembles at set intensity ratios and performing Ramsey spectroscopy, the intensity-dependent frequency shifts are measured within each experimental cycle and extrapolated to the zero-intensity limit. This approach effectively enables shot-to-shot determination of a DLS-free frequency without requiring magic wavelengths or species-specific cancellation schemes. We validate the method for Rb atoms trapped in time-averaged potentials by introducing controlled variations of the total trap power and show that the extrapolated frequency remains insensitive to these fluctuations. The technique is general and can be extended to other systematic shifts, providing a scalable route toward improved stability and accuracy in compact trapped-atom clocks and related quantum sensors relying on optical dipole traps