Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1212.2038 · Journal of Applied Physics

Optimisation of NbN thin films on GaAs substrates for in-situ single photon detection in structured photonic devices

G. Reithmaier, J. Senf, S. Lichtmannecker, T. Reichert, F. Flassig, A. Voss, R. Gross, J. J. Finley

Published Apr 10, 2013• 26 citations
arXivHTMLPDF

Abstract

We prepare NbN thin films by DC magnetron sputtering on [100] GaAs substrates, optimise their quality, and demonstrate their use for efficient single photon detection in the near-infrared. The interrelation between the Nb:N content, growth temperature, and crystal quality is established for 4–22 nm thick films. Optimised films exhibit a superconducting critical temperature of 12.6 ± 0.2K for a film thickness of 22 ± 0.5 nm and 10.2 ± 0.2 K for 4 ± 0.5 nm thick films that are suitable for single photon detection. The optimum growth temperature is shown to be ∼475 °C reflecting a trade-off between enhanced surface diffusion, which improves the crystal quality, and arsenic evaporation from the GaAs substrate. Analysis of the elemental composition of the films provides strong evidence that the δ-phase of NbN is formed in optimised samples, controlled primarily via the nitrogen partial pressure during growth. By patterning optimum 4 nm and 22 nm thick films into a 100 nm wide, 369μm long nanowire meander using electron beam lithography and reactive ion etching, we fabricated single photon detectors on GaAs substrates. Time-resolved studies of the photo-response, absolute detection efficiency, and dark count rates of these detectors as a function of the bias current reveal maximum single photon detection efficiencies as high as 21 ± 2% at 4.3 ± 0.1 K with ∼50 k dark counts per second for bias currents of 98%IC at a wavelength of 950 nm. As expected, similar detectors fabricated from 22 nm thick films exhibit much lower efficiencies (0.004%) with very low dark count rates ≤3 cps. The maximum lateral extension of a photo-generated resistive region is estimated to be 30 ± 8 nm, clearly identifying the low detection efficiency and dark count rate of the thick film detectors as arising from hotspot cooling via the heat reservoir provided by the NbN film.

DOI
10.1063/1.4800838

Related papers

High quality superconducting NbN thin films on GaAs

Francesco Marsili, Alessandro Gaggero, Lianhe H. Li +4 more

A very promising way to increase the detection efficiency of nanowire superconducting single-photon detectors (SSPDs) consists in integrating them with advanced optical structures such as distributed Bragg reflectors (DBRs) and optical waveguides. This requires transferring the challenging SSPD technology from the usual substrates, i.e. sapphire and MgO, to an optical substrate like GaAs, on which DBRs and waveguides can be easily obtained. Therefore, we optimized the deposition process of few-nm thick superconducting NbN films on GaAs and AlAs/GaAs-based DBRs at low temperatures (substrate temperature T S = 400 °C), in order to prevent As evaporation. NbN films ranging from 150 to 3 nm in thickness were then deposited on single-crystal MgO, GaAs, MgO-buffered GaAs and DBRs by current-controlled DC magnetron sputtering (planar, circular, balanced configuration) of Nb in an Ar+N 2 plasma. 5.5 nm thick NbN films on GaAs exhibit T C = 10.7 K, Δ T C = 1.1 K and RRR = 0.7. The growth of such high quality thin NbN films on GaAs and DBRs has never been reported before.

Superconductor Science and Technology•Aug 5, 2009•33 citations

AlN-Buffered Superconducting NbN Nanowire Single-Photon Detector on GaAs

Ekkehart Schmidt, K. Ilin, M. Siegel

We investigated the suitability of AlN as a buffer layer for NbN superconducting nanowire single-photon detectors (SNSPDs) on GaAs. The NbN films with a thickness of 3.3-20 nm deposited onto GaAs substrates with an AlN buffer layer demonstrate a higher critical temperature, critical current density, and lower residual resistivity in comparison to films deposited onto bare substrates. Unfortunately, the thermal coupling of the NbN film to the substrate weakens. SNSPDs made of 4.9-nm-thick NbN films on buffered substrates (in comparison to detectors made from NbN films on bare GaAs) demonstrate three orders of magnitude lower dark count rates and about ten times higher detection efficiency at 900 nm being measured at 90% of the critical current. The system timing jitter of SNSPDs on buffered substrates is 72 ps, which is 36 ps lower than those on bare substrate. However, a weaker thermal coupling of NbN nanowire to the buffered substrate leads to a latching effect at bias currents > 0.97 IC.

arXiv:1609.09694•IEEE Transactions on Applied Superconductivity•Dec 19, 2016•24 citations

Fabrication of High-Speed Single Photon Detectors in NbN for Quantum Information Processing

J-C Villégier, Bertrand Delaet, P. Feautrier +3 more

Abstract. We describe the collective fabrication and characterization of superconducting single photon detectors (SSPD) made of a superconducting NbN meander, suitable for near-infrared applications. The NbN layer acting as the photon absorber is deposited epitaxially on a three inch diameter R-plane Sapphire heated substrate by DC-Magnetron sputtering from a Nb target in a reactive mixture of nitrogen and argon gas. Very thin NbN (~4 nm) films superconducting up to 12 K with a rather large critical current density are in-situ covered by a 1.4 nm thick room temperature sputtered AlN layer protecting NbN from oxidation. Two reliable patterning processes has been developed successfully, one based on electron beam lithography, the second based on selective NbN film anodization under an AFM tip. The filling factor obtained with 150 nm wide stripes in the meander pixel is about 0.5 with e-beam lithography and improved up to 0.8 with AFM patterning. In order to achieve an improved optical coupling of the SSPD by using wafers integrating ion implanted IR waveguides, growth studies of NbN layers have been focused on R-plane Sapphire and silicon substrates. We present optical and superconducting properties of NbN layers by FTIR, ellipsometry and STM.

Journal of Physics Conference Series•Jun 1, 2006•7 citations

High efficiency NbN nanowire superconducting single photon detectors fabricated on MgO substrates from a low temperature process

Francesco Marsili, David Bitauld, Andrea Fiore +5 more

We demonstrate high-performance nanowire superconducting single photon detectors (SSPDs) on bN thin films grown at a temperature compatible with monolithic integration. NbN films ranging from 150 nm to 3 nm in thickness were deposited by dc magnetron sputtering on MgO substrates at 400 degrees C SSPDs were fabricated on high quality NbN films of different thickness (7 to 3 nm) deposited under optimal conditions. Electrical and optical characterizations were performed on the SSPDs. The highest QE value measured at 4.2K is 20% at 1300 nm.

arXiv:0712.3295•Optics Express•Jan 1, 2008•64 citations

High quality ultrathin NbN layers on sapphire for superconducting single photon detectors

R. Espiau de Lamaëstre, P. Odier, Edith Bellet-Amalric +3 more

Ultra-thin epitaxial NbN layers are a key component of Superconducting Single Photon infrared Detectors. Efforts devoted to the layer growth aim at improving their critical temperature and critical current density, while keeping their thickness close to 5 nm and Tc above 10 K, which insure a large bandwidth, large SNR detection at 4K. Choice of substrate is critical: for both applications, MgO wafers and R-plane sapphire are usually considered as best substrates to grown onto. However, growing NbN on M-plane orientation of sapphire wafer, 3 inch in diameter, can help improving the film quality and fabrication yield. NbN thin films were grown by reactive DC magnetron sputtering at about 600°C and passivated by an AlN layer 1.5nm thick deposited in-situ at room temperature. Growth on M-plane is shown to be better than on other sapphire orientations, including R-plane: NbN layer critical temperature reaches 13.3 K, uniform on the wafer, for a film thickness of 4.4nm measured by X-ray reflectivity. Transport properties of NbN grown on those various substrates have been correlated to their crystallographic microstructure, examined by both symmetric and asymmetric X ray diffraction. Observation of diffraction peaks has given insight on the disorientation of the NbN film.

Journal of Physics Conference Series•Feb 1, 2008•16 citations

Nanowire superconducting single-photon detectors on GaAs for integrated quantum photonic applications

Alessandro Gaggero, S. Jahanmiri Nejad, Francesco Marsili +8 more

We demonstrate efficient nanowire superconducting single photon detectors (SSPDs) based on NbN thin films grown on GaAs. NbN films ranging from 3 to 5 nm in thickness have been deposited by dc magnetron sputtering on GaAs substrates at 350 °C. These films show superconducting properties comparable to similar films grown on sapphire and MgO. In order to demonstrate the potential for monolithic integration, SSPDs were fabricated and measured on GaAs/AlAs Bragg mirrors, showing a clear cavity enhancement, with a peak quantum efficiency of 18.3% at λ=1300 nm and T=4.2 K.

Applied Physics Letters•Oct 11, 2010•75 citations
We prepare NbN thin films by DC magnetron sputtering on [100] GaAs substrates, optimise their quality, and demonstrate their use for efficient single photon detection in the near-infrared. The interrelation between the Nb:N content, growth temperature, and crystal quality is established for 4–22 nm thick films. Optimised films exhibit a superconducting critical temperature of 12.6 ± 0.2K for a film thickness of 22 ± 0.5 nm and 10.2 ± 0.2 K for 4 ± 0.5 nm thick films that are suitable for single photon detection. The optimum growth temperature is shown to be ∼475 °C reflecting a trade-off between enhanced surface diffusion, which improves the crystal quality, and arsenic evaporation from the GaAs substrate. Analysis of the elemental composition of the films provides strong evidence that the δ-phase of NbN is formed in optimised samples, controlled primarily via the nitrogen partial pressure during growth. By patterning optimum 4 nm and 22 nm thick films into a 100 nm wide, 369μm long nanowire meander using electron beam lithography and reactive ion etching, we fabricated single photon detectors on GaAs substrates. Time-resolved studies of the photo-response, absolute detection efficiency, and dark count rates of these detectors as a function of the bias current reveal maximum single photon detection efficiencies as high as 21 ± 2% at 4.3 ± 0.1 K with ∼50 k dark counts per second for bias currents of 98%IC at a wavelength of 950 nm. As expected, similar detectors fabricated from 22 nm thick films exhibit much lower efficiencies (0.004%) with very low dark count rates ≤3 cps. The maximum lateral extension of a photo-generated resistive region is estimated to be 30 ± 8 nm, clearly identifying the low detection efficiency and dark count rate of the thick film detectors as arising from hotspot cooling via the heat reservoir provided by the NbN film.
A very promising way to increase the detection efficiency of nanowire superconducting single-photon detectors (SSPDs) consists in integrating them with advanced optical structures such as distributed Bragg reflectors (DBRs) and optical waveguides. This requires transferring the challenging SSPD technology from the usual substrates, i.e. sapphire and MgO, to an optical substrate like GaAs, on which DBRs and waveguides can be easily obtained. Therefore, we optimized the deposition process of few-nm thick superconducting NbN films on GaAs and AlAs/GaAs-based DBRs at low temperatures (substrate temperature T S = 400 °C), in order to prevent As evaporation. NbN films ranging from 150 to 3 nm in thickness were then deposited on single-crystal MgO, GaAs, MgO-buffered GaAs and DBRs by current-controlled DC magnetron sputtering (planar, circular, balanced configuration) of Nb in an Ar+N 2 plasma. 5.5 nm thick NbN films on GaAs exhibit T C = 10.7 K, Δ T C = 1.1 K and RRR = 0.7. The growth of such high quality thin NbN films on GaAs and DBRs has never been reported before.
We investigated the suitability of AlN as a buffer layer for NbN superconducting nanowire single-photon detectors (SNSPDs) on GaAs. The NbN films with a thickness of 3.3-20 nm deposited onto GaAs substrates with an AlN buffer layer demonstrate a higher critical temperature, critical current density, and lower residual resistivity in comparison to films deposited onto bare substrates. Unfortunately, the thermal coupling of the NbN film to the substrate weakens. SNSPDs made of 4.9-nm-thick NbN films on buffered substrates (in comparison to detectors made from NbN films on bare GaAs) demonstrate three orders of magnitude lower dark count rates and about ten times higher detection efficiency at 900 nm being measured at 90% of the critical current. The system timing jitter of SNSPDs on buffered substrates is 72 ps, which is 36 ps lower than those on bare substrate. However, a weaker thermal coupling of NbN nanowire to the buffered substrate leads to a latching effect at bias currents > 0.97 IC.
Abstract. We describe the collective fabrication and characterization of superconducting single photon detectors (SSPD) made of a superconducting NbN meander, suitable for near-infrared applications. The NbN layer acting as the photon absorber is deposited epitaxially on a three inch diameter R-plane Sapphire heated substrate by DC-Magnetron sputtering from a Nb target in a reactive mixture of nitrogen and argon gas. Very thin NbN (~4 nm) films superconducting up to 12 K with a rather large critical current density are in-situ covered by a 1.4 nm thick room temperature sputtered AlN layer protecting NbN from oxidation. Two reliable patterning processes has been developed successfully, one based on electron beam lithography, the second based on selective NbN film anodization under an AFM tip. The filling factor obtained with 150 nm wide stripes in the meander pixel is about 0.5 with e-beam lithography and improved up to 0.8 with AFM patterning. In order to achieve an improved optical coupling of the SSPD by using wafers integrating ion implanted IR waveguides, growth studies of NbN layers have been focused on R-plane Sapphire and silicon substrates. We present optical and superconducting properties of NbN layers by FTIR, ellipsometry and STM.
We demonstrate high-performance nanowire superconducting single photon detectors (SSPDs) on bN thin films grown at a temperature compatible with monolithic integration. NbN films ranging from 150 nm to 3 nm in thickness were deposited by dc magnetron sputtering on MgO substrates at 400 degrees C SSPDs were fabricated on high quality NbN films of different thickness (7 to 3 nm) deposited under optimal conditions. Electrical and optical characterizations were performed on the SSPDs. The highest QE value measured at 4.2K is 20% at 1300 nm.
Ultra-thin epitaxial NbN layers are a key component of Superconducting Single Photon infrared Detectors. Efforts devoted to the layer growth aim at improving their critical temperature and critical current density, while keeping their thickness close to 5 nm and Tc above 10 K, which insure a large bandwidth, large SNR detection at 4K. Choice of substrate is critical: for both applications, MgO wafers and R-plane sapphire are usually considered as best substrates to grown onto. However, growing NbN on M-plane orientation of sapphire wafer, 3 inch in diameter, can help improving the film quality and fabrication yield. NbN thin films were grown by reactive DC magnetron sputtering at about 600°C and passivated by an AlN layer 1.5nm thick deposited in-situ at room temperature. Growth on M-plane is shown to be better than on other sapphire orientations, including R-plane: NbN layer critical temperature reaches 13.3 K, uniform on the wafer, for a film thickness of 4.4nm measured by X-ray reflectivity. Transport properties of NbN grown on those various substrates have been correlated to their crystallographic microstructure, examined by both symmetric and asymmetric X ray diffraction. Observation of diffraction peaks has given insight on the disorientation of the NbN film.
We demonstrate efficient nanowire superconducting single photon detectors (SSPDs) based on NbN thin films grown on GaAs. NbN films ranging from 3 to 5 nm in thickness have been deposited by dc magnetron sputtering on GaAs substrates at 350 °C. These films show superconducting properties comparable to similar films grown on sapphire and MgO. In order to demonstrate the potential for monolithic integration, SSPDs were fabricated and measured on GaAs/AlAs Bragg mirrors, showing a clear cavity enhancement, with a peak quantum efficiency of 18.3% at λ=1300 nm and T=4.2 K.