Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0712.3295 · Optics Express

High efficiency NbN nanowire superconducting single photon detectors fabricated on MgO substrates from a low temperature process

Francesco Marsili, David Bitauld, Andrea Fiore, Alessandro Gaggero, F. Mattioli, Roberto Leoni, M. Benkahoul, Francis Lévy

Published Jan 1, 2008• 64 citations
arXivHTMLPDF

Abstract

We demonstrate high-performance nanowire superconducting single photon detectors (SSPDs) on bN thin films grown at a temperature compatible with monolithic integration. NbN films ranging from 150 nm to 3 nm in thickness were deposited by dc magnetron sputtering on MgO substrates at 400 degrees C SSPDs were fabricated on high quality NbN films of different thickness (7 to 3 nm) deposited under optimal conditions. Electrical and optical characterizations were performed on the SSPDs. The highest QE value measured at 4.2K is 20% at 1300 nm.

DOI
10.1364/oe.16.003191

Related papers

Nanowire superconducting single-photon detectors on GaAs for integrated quantum photonic applications

Alessandro Gaggero, S. Jahanmiri Nejad, Francesco Marsili +8 more

We demonstrate efficient nanowire superconducting single photon detectors (SSPDs) based on NbN thin films grown on GaAs. NbN films ranging from 3 to 5 nm in thickness have been deposited by dc magnetron sputtering on GaAs substrates at 350 °C. These films show superconducting properties comparable to similar films grown on sapphire and MgO. In order to demonstrate the potential for monolithic integration, SSPDs were fabricated and measured on GaAs/AlAs Bragg mirrors, showing a clear cavity enhancement, with a peak quantum efficiency of 18.3% at λ=1300 nm and T=4.2 K.

Applied Physics Letters•Oct 11, 2010•75 citations

NbN nanowire superconducting single photon detectors fabricated on MgO substrates

Francesco Marsili, David Bitauld, Alessandro Gaggero +6 more

High sensitivity ultrafast nanowire superconducting single photon detectors (SSPD) in the near infrared wavelength range have been fabricated with ultrathin (3.5nm) NbN films grown on R-plane sapphire substrates by dc reactive magnetron sputtering in Ar+N2mixture. These results show for the first time that high performance NbN SSPDs can be realized on different substrates and at lower deposition temperature than previously reported, and opens the way to integration with advanced solid state optical structures. SSPDs have been fabricated by a two mask process using electron beam lithography and reactive ion etching on 3.5nm thick NbN films deposited under optimal conditions on MgO.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2007•0 citations

NbN nanowire superconducting single photon detectors fabricated on MgO substrates

David Bitauld, Francesco Marsili, Andrea Fiore +5 more

We report on the fabrication and characterization of high performance nanowire superconducting single photon detectors (SSPD) on MgO substrates. The deposition of the superconducting material (NbN) has been performed by magnetron sputtering at 400°C. This deposition temperature is low enough to be compatible with the fabrication on traditional optical materials like GaAs. First, SSPD meanders covering a surface of 5 × 5 µm2 were characterized. We measured quantum efficiencies up to 20% at 1300 nm. Then, we used a straight 250 µm-long NbN nanowire to perform a spatially resolved measurement of the efficiency. Both efficiency dips and peaks were observed. The dips were correlated to lithographic defects, as confirmed by scanning electron microscopy. Conversely, no evidence of a lithographic origin of efficiency peaks was found.

Journal of Modern Optics•Jan 20, 2009•3 citations

Large sensitive-area NbN nanowire superconducting single-photon detectors fabricated on single-crystal MgO substrates

Shigehito Miki, Mikio Fujiwara, Masahide Sasaki +5 more

We report on the performance of large area NbN nanowire superconducting single-photon detectors (SSPDs). 20×20μm2 area SSPDs with 80 and 100nm linewidths and 50% fill factor were fabricated in 4-nm-thick NbN films grown on single-crystal MgO substrates. The high quality of the devices was verified by electrical and optical testing and compares favorably to measurements of 10×10μm2 area SSPDs. Measurements of kinetic inductance versus bias current indicate that the constriction density is low. The fiber-coupled detection efficiency of the devices was 0.4%–3.5% at 100Hz dark count rate.

Applied Physics Letters•Feb 11, 2008•119 citations

High quality superconducting NbN thin films on GaAs

Francesco Marsili, Alessandro Gaggero, Lianhe H. Li +4 more

A very promising way to increase the detection efficiency of nanowire superconducting single-photon detectors (SSPDs) consists in integrating them with advanced optical structures such as distributed Bragg reflectors (DBRs) and optical waveguides. This requires transferring the challenging SSPD technology from the usual substrates, i.e. sapphire and MgO, to an optical substrate like GaAs, on which DBRs and waveguides can be easily obtained. Therefore, we optimized the deposition process of few-nm thick superconducting NbN films on GaAs and AlAs/GaAs-based DBRs at low temperatures (substrate temperature T S = 400 °C), in order to prevent As evaporation. NbN films ranging from 150 to 3 nm in thickness were then deposited on single-crystal MgO, GaAs, MgO-buffered GaAs and DBRs by current-controlled DC magnetron sputtering (planar, circular, balanced configuration) of Nb in an Ar+N 2 plasma. 5.5 nm thick NbN films on GaAs exhibit T C = 10.7 K, Δ T C = 1.1 K and RRR = 0.7. The growth of such high quality thin NbN films on GaAs and DBRs has never been reported before.

Superconductor Science and Technology•Aug 5, 2009•33 citations

NbN Superconducting Single-Photon Detectors Prepared on Single-Crystal MgO Substrates

Shigehito Miki, Mikio Fujiwara, Masahide Sasaki +1 more

We report the fabrication of NbN superconducting single photon detectors (SSPDs) and the development of a receiver system operating in a standard transport helium dewar. The NbN- SSPDs consisted of a 3.5 to 6.7-nm-thick NbN ultrathin film meander line and a 150-nm-thick NbN thin-film coplanar waveguide line. The NbN ultrathin films were deposited on single-crystal MgO substrates by reactive dc-magnetron sputtering to grow the NbN ultrathin films epitaxially, and the films were formed so that they had 80 to 200-nm-wide meander lines, which covered a 20 times 20 or 50 times 50 mum2area. All devices demonstrated good superconductivity, e.g., a device with a 3.9-nm-thick and 80-nm-wide line had a Tcof 10.8 K, an Icof 19 muA, and a Jcof 5.9 times 106A/cm2, which meant there was no serious deterioration in superconductivity compared with unprocessed films. We describe a reliable connection between an optical fiber and the detector, a setup which was used for first tests with pulsed light.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•76 citations
We demonstrate high-performance nanowire superconducting single photon detectors (SSPDs) on bN thin films grown at a temperature compatible with monolithic integration. NbN films ranging from 150 nm to 3 nm in thickness were deposited by dc magnetron sputtering on MgO substrates at 400 degrees C SSPDs were fabricated on high quality NbN films of different thickness (7 to 3 nm) deposited under optimal conditions. Electrical and optical characterizations were performed on the SSPDs. The highest QE value measured at 4.2K is 20% at 1300 nm.
We demonstrate efficient nanowire superconducting single photon detectors (SSPDs) based on NbN thin films grown on GaAs. NbN films ranging from 3 to 5 nm in thickness have been deposited by dc magnetron sputtering on GaAs substrates at 350 °C. These films show superconducting properties comparable to similar films grown on sapphire and MgO. In order to demonstrate the potential for monolithic integration, SSPDs were fabricated and measured on GaAs/AlAs Bragg mirrors, showing a clear cavity enhancement, with a peak quantum efficiency of 18.3% at λ=1300 nm and T=4.2 K.
High sensitivity ultrafast nanowire superconducting single photon detectors (SSPD) in the near infrared wavelength range have been fabricated with ultrathin (3.5nm) NbN films grown on R-plane sapphire substrates by dc reactive magnetron sputtering in Ar+N2mixture. These results show for the first time that high performance NbN SSPDs can be realized on different substrates and at lower deposition temperature than previously reported, and opens the way to integration with advanced solid state optical structures. SSPDs have been fabricated by a two mask process using electron beam lithography and reactive ion etching on 3.5nm thick NbN films deposited under optimal conditions on MgO.
We report on the fabrication and characterization of high performance nanowire superconducting single photon detectors (SSPD) on MgO substrates. The deposition of the superconducting material (NbN) has been performed by magnetron sputtering at 400°C. This deposition temperature is low enough to be compatible with the fabrication on traditional optical materials like GaAs. First, SSPD meanders covering a surface of 5 × 5 µm2 were characterized. We measured quantum efficiencies up to 20% at 1300 nm. Then, we used a straight 250 µm-long NbN nanowire to perform a spatially resolved measurement of the efficiency. Both efficiency dips and peaks were observed. The dips were correlated to lithographic defects, as confirmed by scanning electron microscopy. Conversely, no evidence of a lithographic origin of efficiency peaks was found.
We report on the performance of large area NbN nanowire superconducting single-photon detectors (SSPDs). 20×20μm2 area SSPDs with 80 and 100nm linewidths and 50% fill factor were fabricated in 4-nm-thick NbN films grown on single-crystal MgO substrates. The high quality of the devices was verified by electrical and optical testing and compares favorably to measurements of 10×10μm2 area SSPDs. Measurements of kinetic inductance versus bias current indicate that the constriction density is low. The fiber-coupled detection efficiency of the devices was 0.4%–3.5% at 100Hz dark count rate.
A very promising way to increase the detection efficiency of nanowire superconducting single-photon detectors (SSPDs) consists in integrating them with advanced optical structures such as distributed Bragg reflectors (DBRs) and optical waveguides. This requires transferring the challenging SSPD technology from the usual substrates, i.e. sapphire and MgO, to an optical substrate like GaAs, on which DBRs and waveguides can be easily obtained. Therefore, we optimized the deposition process of few-nm thick superconducting NbN films on GaAs and AlAs/GaAs-based DBRs at low temperatures (substrate temperature T S = 400 °C), in order to prevent As evaporation. NbN films ranging from 150 to 3 nm in thickness were then deposited on single-crystal MgO, GaAs, MgO-buffered GaAs and DBRs by current-controlled DC magnetron sputtering (planar, circular, balanced configuration) of Nb in an Ar+N 2 plasma. 5.5 nm thick NbN films on GaAs exhibit T C = 10.7 K, Δ T C = 1.1 K and RRR = 0.7. The growth of such high quality thin NbN films on GaAs and DBRs has never been reported before.
We report the fabrication of NbN superconducting single photon detectors (SSPDs) and the development of a receiver system operating in a standard transport helium dewar. The NbN- SSPDs consisted of a 3.5 to 6.7-nm-thick NbN ultrathin film meander line and a 150-nm-thick NbN thin-film coplanar waveguide line. The NbN ultrathin films were deposited on single-crystal MgO substrates by reactive dc-magnetron sputtering to grow the NbN ultrathin films epitaxially, and the films were formed so that they had 80 to 200-nm-wide meander lines, which covered a 20 times 20 or 50 times 50 mum2area. All devices demonstrated good superconductivity, e.g., a device with a 3.9-nm-thick and 80-nm-wide line had a Tcof 10.8 K, an Icof 19 muA, and a Jcof 5.9 times 106A/cm2, which meant there was no serious deterioration in superconductivity compared with unprocessed films. We describe a reliable connection between an optical fiber and the detector, a setup which was used for first tests with pulsed light.