Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1103.5256 · Applied Physics Letters

Surface-electrode ion trap with integrated light source

Tony Hyun Kim, Peter F. Herskind, Isaac L. Chuang

Published May 23, 2011• 34 citations
arXivHTMLPDF

Abstract

An atomic ion is trapped at the tip of a single-mode optical fiber in a cryogenic (8 K) surface-electrode ion trap. The fiber serves as an integrated source of laser light, which drives the quadrupole qubit transition of S88r+. Through in situ translation of the nodal point of the trapping field, the Gaussian beam profile of the fiber output is imaged, and the fiber-ion displacement, in units of the mode waist at the ion, is optimized to within 0.13±0.10 of the mode center despite an initial offset of 3.30±0.10. Fiber-induced charging by 125 μW of 674 nm light is observed to be ∼10 V/m at an ion height of 670 μm, with charging and discharging time constants of 1.6±0.3 s and 4.7±0.6 s, respectively. This work is of importance to large-scale, ion-based quantum information processing, where optics integration in surface-electrode designs may be a crucial enabling technology.

DOI
10.1063/1.3593496

Related papers

An optical-fiber interface to a trapped-ion quantum computer

Tony Hyun Kim

The trapped-ion quantum computer is an atom-based implementation of a quantum computer that has successfully demonstrated numerous quantum algorithms and the potential for scalability.Fundamental to its operation is the short-range Coulombic interaction among its atomic ion registers, which has led to the development of local, single-chip devices.In this work, we demonstrate the integration of an optical fiber with a planar ion trap, and show the physical interaction between fiber light and the trapped-ion qubit.As the single-mode fiber is well-suited to the transport of single photons, the fiber interface (when augmented by an optical cavity) represents a means to link distantly located quantum computers through a common optical network.Hence, this work represents a step towards the paradigm of distributed quantum computing: self-contained, technically-simple processors may be optically linked together to perform large-scale quantum computation.This thesis is divided into two parts.In the first, we provide a thorough review of ion trap design and a detailed numerical analysis of trapped-ion motion.This theoretical discussion culminates with the development of an electronic technique that permits the arbitrary, in situ positioning of a trapped atom in the ion trap.The positioning ability is an enabling technology for optics integration as it allows for complete freedom in the alignment of the trapped atom with respect to the integrated element.In the second part, the construction of the experimental setup and the integrated "fibertrap" is described.In our experiment, a single 88 Sr + is trapped 670 µm above the end of an optical fiber in a cryogenic (8 K) surface-electrode ion trap.The fiber serves as an integrated source of laser light, which drives the quadrupole qubit transition of 88 Sr + .Using in situ translation of the ion, the Gaussian beam profile of the fiber output is imaged, and the fiberion displacement, in units of the mode waist at the ion, is optimized to within 0.13 ± 0.10 of the mode center despite an initial offset of 3.30 ± 0.10 arising from fabrication.We also quantify the perturbative effects of the fiber dielectric on ion trap operation.Light-induced charging by 125 µW of 674 nm fiber light is measured as an induced electric field of ∼ 10 V/m at the ion, with charging and discharging time constants of 1.6 ± 0.3 s and 4.7 ± 0.6 s.These measurements are of general importance to trapped-ion quantum computing, where the scalability of the platform depends crucially on the feasibility of on-chip optics integration.

•Jan 1, 2011•2 citations

Efficient Fiber Optic Detection of Trapped Ion Fluorescence

Aaron P. VanDevender, Yves Colombe, Jason Amini +2 more

Integration of fiber optics may play a critical role in the development of quantum information processors based on trapped ions and atoms by enabling scalable collection and delivery of light and coupling trapped ions to optical microcavities. We trap 24Mg+ ions in a surface-electrode Paul trap that includes an integrated optical fiber for detecting 280-nm fluorescence photons. The collection numerical aperture is 0.37, and total collection efficiency is 2.1%. The ion can be positioned between 80 and 100 μm from the tip of the fiber by use of an adjustable rf pseudopotential.

arXiv:1004.0668•Physical Review Letters•Jul 7, 2010•88 citations

Ion trap on borosilicate substrate with integrated femtosecond-laser-written waveguide

Jakob Wahl, Alexander Zesar, Philipp Hurdax +9 more

We present an ion-trap platform on borosilicate glass with an integrated femtosecond-laser-written waveguide for on-chip light delivery. The optical layer is physically separated from the electrode substrate and bonded atop the trap, remaining compatible with silicon-based integration. We engineer single-mode low-loss guidance at 729 nm with tunable mode-field diameter and achieve low-loss curved waveguides down to a radius of curvature of 6 mm. We also extend single-mode operation to a wavelength of 405 nm. The fabrication process is compatible with the industrial fabrication of a single-metal-layer surface-electrode trap, including active fiber alignment and bonding. We validate the platform in a cryogenic trapped-ion system with $^{40}$Ca$^+$, demonstrating trapping, shuttling the ion to a zone in front of the waveguide, and coherent operations driven by 729 nm light delivered through the integrated waveguide. We characterize the effect of the exposed dielectric on the ion and measure stray electric fields that show slow drift at a timescale of hours. The architecture is compatible with hybrid micro-optics (e.g. pick-and-place lenses) to realize single ion addressing and provides a robust, scalable route to integrated light delivery for trapped-ion devices.

quant-pharXiv:2608.13207•Aug 14, 2026•0 citations

Individual trapped-ion addressing with adjoint-optimized multimode photonic circuits

Melika Momenzadeh, Ke Sun, Qiming Wu +4 more

Trapped-ion quantum computing requires precise optical control for individual qubit manipulation. However, conventional free-space optics face challenges in alignment stability and scalability as the number of qubits increases. Integrated photonics offers a promising alternative, providing miniaturized optical systems on a chip. Here, we propose a design for a multimode photonic circuit integrated with a surface-electrode ion trap capable of targeted and reconfigurable light delivery. Three closely positioned ions can be addressed using a focusing grating coupler that emits multimode light through electrode openings to ions trapped 68 μm above the chip. Simulations show that the couplers achieve a diffraction-limited spot with a 4.3 μm beam waist along the trap axis and 2.2 μm perpendicular to the trap axis. Controlled interference of the TE 00 and TE 10 modes results in crosstalk of –20 dB to –30 dB at ion separations of 5–8 μm when addressing ions individually, and down to –60 dB when two of the three ions are addressed simultaneously. Additionally, the higher-order TE modes can offer a novel mechanism for driving spin-motion coupling transitions, potentially enabling alternative approaches to quantum gates and simulations. The proposed integrated platform offers a viable path for constructing large-scale trapped-ion systems, leveraging the benefits of nanophotonic design for precise and reliable ion manipulation.

arXiv:2505.08997•npj Nanophotonics•Jan 27, 2026•6 citations

Sensitive, 3D micromotion compensation in a surface-electrode ion trap

Amira M. Eltony

Following successful demonstrations of quantum algorithms and error correction with a handful of trapped ions in a macroscopic, machined Paul trap, there is a growing effort to move towards microfabricated traps with all the electrodes on a single chip.These traps, known as surface-electrode ion traps, are more amenable to being shrunk in size and replicated, or integrated with optical components and electronic devices.However, in the shift towards surface-electrode traps, and as traps are miniaturized in general, laser beams are brought closer to electrode surfaces, exacerbating laserinduced charging.Because of their charge, trapped ions are extremely sensitive to stray charges that accumulate on the trap surface.The DC potentials caused by stray charge displace the ion from the null of the RF trapping field, resulting in a fast, driven motion of the ion (known as micromotion) which hinders quantum operations by broadening transitions and causing decoherence.In a surface trap, micromotion detection is difficult as the laser beams used for measurement typically cannot crash into the trap, obscuring ion offsets out of the trap plane.Existing methods for micromotion detection permit ion positioning accurate to the ground state wavepacket size (of order 10 nm), but cannot identify ion offsets out of the trap plane with the same accuracy.Schemes for sensitive compensation often have restrictive requirements such as access to a narrow atomic transition.We introduce a new approach, which permits out-of-plane micromotion compensation to within 10s of nanometers with minimal overhead.Our technique synchronously detects ion excitation along the trap axes when it is driven by secular-frequency sidebands added to the RF electrodes; the excitation amplitude is proportional to the offset from the RF null.We make a detailed theoretical comparison with other techniques for micromotion compensation and demonstrate our technique experimentally.

•Jan 1, 2013•4 citations

Optical cavity integrated surface ion trap for enhanced light collection

Francisco Benito

Ion trap systems allow the faithful storage and manipulation of qubits encoded in the energy levels of the ions, and can be interfaced with photonic qubits that can be transmitted to connect remote quantum systems. Single photons transmitted from two remote sites, each entangled with one quantum memory, can be used to entangle distant quantum memories by interfering on a beam splitter. Efficient remote entanglement generation relies upon efficient light collection from single ions into a single mode fiber. This can be realized by integrating an ion trap with an optical cavity and employing the Purcell effect for enhancing the light collection. Remote entanglement can be used as a resource for a quantum repeater for provably secure long-distance communication or as a method for communicating within a distributed quantum information processor. I present the integration of a 1 mm optical cavity with a micro-fabricated surface ion trap. The plano-concave cavity is oriented normal to the chip surface where the planar mirror is attached underneath the trap chip. The cavity is locked using a 780 nm laser which is stabilized to Rubidium and shifted to match the 369 nm Doppler transition in Ytterbium. The linear ion trap allows ions to be shuttled in and out of the cavity mode. The Purcell enhancement of spontaneous emission into the cavity mode would then allow efficient collection of the emitted photons, enabling faster remote entanglement generation.

•Feb 1, 2016•1 citation
An atomic ion is trapped at the tip of a single-mode optical fiber in a cryogenic (8 K) surface-electrode ion trap. The fiber serves as an integrated source of laser light, which drives the quadrupole qubit transition of S88r+. Through in situ translation of the nodal point of the trapping field, the Gaussian beam profile of the fiber output is imaged, and the fiber-ion displacement, in units of the mode waist at the ion, is optimized to within 0.13±0.10 of the mode center despite an initial offset of 3.30±0.10. Fiber-induced charging by 125 μW of 674 nm light is observed to be ∼10 V/m at an ion height of 670 μm, with charging and discharging time constants of 1.6±0.3 s and 4.7±0.6 s, respectively. This work is of importance to large-scale, ion-based quantum information processing, where optics integration in surface-electrode designs may be a crucial enabling technology.
The trapped-ion quantum computer is an atom-based implementation of a quantum computer that has successfully demonstrated numerous quantum algorithms and the potential for scalability.Fundamental to its operation is the short-range Coulombic interaction among its atomic ion registers, which has led to the development of local, single-chip devices.In this work, we demonstrate the integration of an optical fiber with a planar ion trap, and show the physical interaction between fiber light and the trapped-ion qubit.As the single-mode fiber is well-suited to the transport of single photons, the fiber interface (when augmented by an optical cavity) represents a means to link distantly located quantum computers through a common optical network.Hence, this work represents a step towards the paradigm of distributed quantum computing: self-contained, technically-simple processors may be optically linked together to perform large-scale quantum computation.This thesis is divided into two parts.In the first, we provide a thorough review of ion trap design and a detailed numerical analysis of trapped-ion motion.This theoretical discussion culminates with the development of an electronic technique that permits the arbitrary, in situ positioning of a trapped atom in the ion trap.The positioning ability is an enabling technology for optics integration as it allows for complete freedom in the alignment of the trapped atom with respect to the integrated element.In the second part, the construction of the experimental setup and the integrated "fibertrap" is described.In our experiment, a single 88 Sr + is trapped 670 µm above the end of an optical fiber in a cryogenic (8 K) surface-electrode ion trap.The fiber serves as an integrated source of laser light, which drives the quadrupole qubit transition of 88 Sr + .Using in situ translation of the ion, the Gaussian beam profile of the fiber output is imaged, and the fiberion displacement, in units of the mode waist at the ion, is optimized to within 0.13 ± 0.10 of the mode center despite an initial offset of 3.30 ± 0.10 arising from fabrication.We also quantify the perturbative effects of the fiber dielectric on ion trap operation.Light-induced charging by 125 µW of 674 nm fiber light is measured as an induced electric field of ∼ 10 V/m at the ion, with charging and discharging time constants of 1.6 ± 0.3 s and 4.7 ± 0.6 s.These measurements are of general importance to trapped-ion quantum computing, where the scalability of the platform depends crucially on the feasibility of on-chip optics integration.
Integration of fiber optics may play a critical role in the development of quantum information processors based on trapped ions and atoms by enabling scalable collection and delivery of light and coupling trapped ions to optical microcavities. We trap 24Mg+ ions in a surface-electrode Paul trap that includes an integrated optical fiber for detecting 280-nm fluorescence photons. The collection numerical aperture is 0.37, and total collection efficiency is 2.1%. The ion can be positioned between 80 and 100 μm from the tip of the fiber by use of an adjustable rf pseudopotential.
We present an ion-trap platform on borosilicate glass with an integrated femtosecond-laser-written waveguide for on-chip light delivery. The optical layer is physically separated from the electrode substrate and bonded atop the trap, remaining compatible with silicon-based integration. We engineer single-mode low-loss guidance at 729 nm with tunable mode-field diameter and achieve low-loss curved waveguides down to a radius of curvature of 6 mm. We also extend single-mode operation to a wavelength of 405 nm. The fabrication process is compatible with the industrial fabrication of a single-metal-layer surface-electrode trap, including active fiber alignment and bonding. We validate the platform in a cryogenic trapped-ion system with 40^{40}40Ca+^++, demonstrating trapping, shuttling the ion to a zone in front of the waveguide, and coherent operations driven by 729 nm light delivered through the integrated waveguide. We characterize the effect of the exposed dielectric on the ion and measure stray electric fields that show slow drift at a timescale of hours. The architecture is compatible with hybrid micro-optics (e.g. pick-and-place lenses) to realize single ion addressing and provides a robust, scalable route to integrated light delivery for trapped-ion devices.
Trapped-ion quantum computing requires precise optical control for individual qubit manipulation. However, conventional free-space optics face challenges in alignment stability and scalability as the number of qubits increases. Integrated photonics offers a promising alternative, providing miniaturized optical systems on a chip. Here, we propose a design for a multimode photonic circuit integrated with a surface-electrode ion trap capable of targeted and reconfigurable light delivery. Three closely positioned ions can be addressed using a focusing grating coupler that emits multimode light through electrode openings to ions trapped 68 μm above the chip. Simulations show that the couplers achieve a diffraction-limited spot with a 4.3 μm beam waist along the trap axis and 2.2 μm perpendicular to the trap axis. Controlled interference of the TE 00 and TE 10 modes results in crosstalk of –20 dB to –30 dB at ion separations of 5–8 μm when addressing ions individually, and down to –60 dB when two of the three ions are addressed simultaneously. Additionally, the higher-order TE modes can offer a novel mechanism for driving spin-motion coupling transitions, potentially enabling alternative approaches to quantum gates and simulations. The proposed integrated platform offers a viable path for constructing large-scale trapped-ion systems, leveraging the benefits of nanophotonic design for precise and reliable ion manipulation.
Following successful demonstrations of quantum algorithms and error correction with a handful of trapped ions in a macroscopic, machined Paul trap, there is a growing effort to move towards microfabricated traps with all the electrodes on a single chip.These traps, known as surface-electrode ion traps, are more amenable to being shrunk in size and replicated, or integrated with optical components and electronic devices.However, in the shift towards surface-electrode traps, and as traps are miniaturized in general, laser beams are brought closer to electrode surfaces, exacerbating laserinduced charging.Because of their charge, trapped ions are extremely sensitive to stray charges that accumulate on the trap surface.The DC potentials caused by stray charge displace the ion from the null of the RF trapping field, resulting in a fast, driven motion of the ion (known as micromotion) which hinders quantum operations by broadening transitions and causing decoherence.In a surface trap, micromotion detection is difficult as the laser beams used for measurement typically cannot crash into the trap, obscuring ion offsets out of the trap plane.Existing methods for micromotion detection permit ion positioning accurate to the ground state wavepacket size (of order 10 nm), but cannot identify ion offsets out of the trap plane with the same accuracy.Schemes for sensitive compensation often have restrictive requirements such as access to a narrow atomic transition.We introduce a new approach, which permits out-of-plane micromotion compensation to within 10s of nanometers with minimal overhead.Our technique synchronously detects ion excitation along the trap axes when it is driven by secular-frequency sidebands added to the RF electrodes; the excitation amplitude is proportional to the offset from the RF null.We make a detailed theoretical comparison with other techniques for micromotion compensation and demonstrate our technique experimentally.
Ion trap systems allow the faithful storage and manipulation of qubits encoded in the energy levels of the ions, and can be interfaced with photonic qubits that can be transmitted to connect remote quantum systems. Single photons transmitted from two remote sites, each entangled with one quantum memory, can be used to entangle distant quantum memories by interfering on a beam splitter. Efficient remote entanglement generation relies upon efficient light collection from single ions into a single mode fiber. This can be realized by integrating an ion trap with an optical cavity and employing the Purcell effect for enhancing the light collection. Remote entanglement can be used as a resource for a quantum repeater for provably secure long-distance communication or as a method for communicating within a distributed quantum information processor. I present the integration of a 1 mm optical cavity with a micro-fabricated surface ion trap. The plano-concave cavity is oriented normal to the chip surface where the planar mirror is attached underneath the trap chip. The cavity is locked using a 780 nm laser which is stabilized to Rubidium and shifted to match the 369 nm Doppler transition in Ytterbium. The linear ion trap allows ions to be shuttled in and out of the cavity mode. The Purcell enhancement of spontaneous emission into the cavity mode would then allow efficient collection of the emitted photons, enabling faster remote entanglement generation.