Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

An optical-fiber interface to a trapped-ion quantum computer

Tony Hyun Kim

Published Jan 1, 2011• 2 citations
OpenAlex

Abstract

The trapped-ion quantum computer is an atom-based implementation of a quantum computer that has successfully demonstrated numerous quantum algorithms and the potential for scalability.Fundamental to its operation is the short-range Coulombic interaction among its atomic ion registers, which has led to the development of local, single-chip devices.In this work, we demonstrate the integration of an optical fiber with a planar ion trap, and show the physical interaction between fiber light and the trapped-ion qubit.As the single-mode fiber is well-suited to the transport of single photons, the fiber interface (when augmented by an optical cavity) represents a means to link distantly located quantum computers through a common optical network.Hence, this work represents a step towards the paradigm of distributed quantum computing: self-contained, technically-simple processors may be optically linked together to perform large-scale quantum computation.This thesis is divided into two parts.In the first, we provide a thorough review of ion trap design and a detailed numerical analysis of trapped-ion motion.This theoretical discussion culminates with the development of an electronic technique that permits the arbitrary, in situ positioning of a trapped atom in the ion trap.The positioning ability is an enabling technology for optics integration as it allows for complete freedom in the alignment of the trapped atom with respect to the integrated element.In the second part, the construction of the experimental setup and the integrated "fibertrap" is described.In our experiment, a single 88 Sr + is trapped 670 µm above the end of an optical fiber in a cryogenic (8 K) surface-electrode ion trap.The fiber serves as an integrated source of laser light, which drives the quadrupole qubit transition of 88 Sr + .Using in situ translation of the ion, the Gaussian beam profile of the fiber output is imaged, and the fiberion displacement, in units of the mode waist at the ion, is optimized to within 0.13 ± 0.10 of the mode center despite an initial offset of 3.30 ± 0.10 arising from fabrication.We also quantify the perturbative effects of the fiber dielectric on ion trap operation.Light-induced charging by 125 µW of 674 nm fiber light is measured as an induced electric field of ∼ 10 V/m at the ion, with charging and discharging time constants of 1.6 ± 0.3 s and 4.7 ± 0.6 s.These measurements are of general importance to trapped-ion quantum computing, where the scalability of the platform depends crucially on the feasibility of on-chip optics integration.

Related papers

Surface-electrode ion trap with integrated light source

Tony Hyun Kim, Peter F. Herskind, Isaac L. Chuang

An atomic ion is trapped at the tip of a single-mode optical fiber in a cryogenic (8 K) surface-electrode ion trap. The fiber serves as an integrated source of laser light, which drives the quadrupole qubit transition of S88r+. Through in situ translation of the nodal point of the trapping field, the Gaussian beam profile of the fiber output is imaged, and the fiber-ion displacement, in units of the mode waist at the ion, is optimized to within 0.13±0.10 of the mode center despite an initial offset of 3.30±0.10. Fiber-induced charging by 125 μW of 674 nm light is observed to be ∼10 V/m at an ion height of 670 μm, with charging and discharging time constants of 1.6±0.3 s and 4.7±0.6 s, respectively. This work is of importance to large-scale, ion-based quantum information processing, where optics integration in surface-electrode designs may be a crucial enabling technology.

arXiv:1103.5256•Applied Physics Letters•May 23, 2011•34 citations

Integrated chips and optical cavities for trapped ion quantum information processing

David R. Leibrandt

Quantum information processing is a new and exciting field which uses quantum mechanical systems to perform information processing. At the heart of the excitement are quantum computation - which promises efficient algorithms for simulating physical systems, factoring, and searching unsorted databases - and quantum communication - which provides a provably secure communications protocol. Trapped ions show much promise for achieving large-scale quantum information processing. Experiments thus far have demonstrated small algorithms and entanglement of two remote ions. Current work focuses on scaling to large numbers of ions for quantum computation and interconversion between trapped ions and photons for quantum communication. This thesis addresses some of the challenges facing scaling and interconversion for trapped ion quantum information processing. The first part of the thesis describes the development of scalable, multiplexed ion trap chips for quantum computation. The ion trap chips are based on a new ion trap geometry, called the surface-electrode trap, in which all of the electrodes reside in a single plane. Three generations of surface-electrode traps are designed, fabricated, and tested - culminating with the demonstration of an ion trap chip microfabricated using standard silicon VLSI materials and processes for scalability to small trap size and large arrays of interconnected ion traps. The second part of the thesis presents an experiment that demonstrates cavity cooling, a method of laser cooling the motional state of trapped ions without decohering the internal qubit state.

•Jan 1, 2009•3 citations

Microfabricated Surface Trap and Cavity Integration for Trapped Ion Quantum Computing

Van Rynbach, Jacques André

Atomic ions trapped in microfabricated surface traps can be utilized as a physical platform with which to build a quantum computer. They possess many of the desirable characteristics of such a device, including high fidelity state preparation and readout, universal logic gates, and long coherence times, and can be readily entangled with each other through photonic interconnects. The use of optical cavities integrated with trapped ion qubits as a photonic interface presents the possibility for order of magnitude improvements in performance in several key areas for their use in quantum computation. The first part of this thesis describes the design and fabrication of a novel surface trap for integration with an optical cavity. The trap is custom made on a highly reflective mirror surface and includes the capability of moving the ion trap location along all three trap axes with nanometer scale precision. The second part of this thesis demonstrates the suitability of small microcavities formed from laser ablated, fused silica substrates with radii of curvature in the 300-500 micron range for use with the mirror trap as part of an integrated ion trap cavity system. Quantum computing applications for such a system include dramatic improvements in the photon entanglement rate of up to 10 kHz, the qubit measurement time down to 1 microsecond, and the qubit measurement error rate down to the 1e-5 range. The final part of this thesis describes a performance simulator for exploring the physical resource requirements and performance demands to scale a quantum computer to sizes capable of implementing quantum algorithms beyond the limits of classical computation.

•Jan 1, 2016•0 citations

Efficient Fiber Optic Detection of Trapped Ion Fluorescence

Aaron P. VanDevender, Yves Colombe, Jason Amini +2 more

Integration of fiber optics may play a critical role in the development of quantum information processors based on trapped ions and atoms by enabling scalable collection and delivery of light and coupling trapped ions to optical microcavities. We trap 24Mg+ ions in a surface-electrode Paul trap that includes an integrated optical fiber for detecting 280-nm fluorescence photons. The collection numerical aperture is 0.37, and total collection efficiency is 2.1%. The ion can be positioned between 80 and 100 μm from the tip of the fiber by use of an adjustable rf pseudopotential.

arXiv:1004.0668•Physical Review Letters•Jul 7, 2010•88 citations

A fibre-based single-photon source

Andrew Riley-Watson

The controlled emission and absorption of single photons is an important enabling technology in the fields of quantum communication, cryptography and computing. We have realised a novel single photon source, based on a miniature ‘endcap’ ion trap with integrated optical fibres. To minimise distortion of the trapping field the fibres are tightly integrated and recessed within the two hollow cylindrical rf electrodes of the trap. This allows us to bring the fibres to within approximately 300 µm of the trapped ion. With the fibres in place we are able to collect the ion’s fluorescence using no further optics. In this thesis the ion trap is fully characterised, and the quantum nature of the light demonstrated in the results of a variant on the Hanbury Brown-Twiss photon-correlation experiment. The scheme will ultimately be extended to implement a coherent ion-photon interface through strong coupling cavity-QED. Towards this end, an ultra-high-finesse cavity has been designed and fabricated by laser-machining and coating surfaces with a range of radii of curvature on the end facets of the fibres. To improve the stability and precision manipulation of the cavity in-vacuum, an entirely new trap has been designed and built. Finally, the current status of the fibre cavity and the outlook for the experiment are presented.

•Jun 16, 2013•0 citations

Optical cavity integrated surface ion trap for enhanced light collection

Francisco Benito

Ion trap systems allow the faithful storage and manipulation of qubits encoded in the energy levels of the ions, and can be interfaced with photonic qubits that can be transmitted to connect remote quantum systems. Single photons transmitted from two remote sites, each entangled with one quantum memory, can be used to entangle distant quantum memories by interfering on a beam splitter. Efficient remote entanglement generation relies upon efficient light collection from single ions into a single mode fiber. This can be realized by integrating an ion trap with an optical cavity and employing the Purcell effect for enhancing the light collection. Remote entanglement can be used as a resource for a quantum repeater for provably secure long-distance communication or as a method for communicating within a distributed quantum information processor. I present the integration of a 1 mm optical cavity with a micro-fabricated surface ion trap. The plano-concave cavity is oriented normal to the chip surface where the planar mirror is attached underneath the trap chip. The cavity is locked using a 780 nm laser which is stabilized to Rubidium and shifted to match the 369 nm Doppler transition in Ytterbium. The linear ion trap allows ions to be shuttled in and out of the cavity mode. The Purcell enhancement of spontaneous emission into the cavity mode would then allow efficient collection of the emitted photons, enabling faster remote entanglement generation.

•Feb 1, 2016•1 citation
The trapped-ion quantum computer is an atom-based implementation of a quantum computer that has successfully demonstrated numerous quantum algorithms and the potential for scalability.Fundamental to its operation is the short-range Coulombic interaction among its atomic ion registers, which has led to the development of local, single-chip devices.In this work, we demonstrate the integration of an optical fiber with a planar ion trap, and show the physical interaction between fiber light and the trapped-ion qubit.As the single-mode fiber is well-suited to the transport of single photons, the fiber interface (when augmented by an optical cavity) represents a means to link distantly located quantum computers through a common optical network.Hence, this work represents a step towards the paradigm of distributed quantum computing: self-contained, technically-simple processors may be optically linked together to perform large-scale quantum computation.This thesis is divided into two parts.In the first, we provide a thorough review of ion trap design and a detailed numerical analysis of trapped-ion motion.This theoretical discussion culminates with the development of an electronic technique that permits the arbitrary, in situ positioning of a trapped atom in the ion trap.The positioning ability is an enabling technology for optics integration as it allows for complete freedom in the alignment of the trapped atom with respect to the integrated element.In the second part, the construction of the experimental setup and the integrated "fibertrap" is described.In our experiment, a single 88 Sr + is trapped 670 µm above the end of an optical fiber in a cryogenic (8 K) surface-electrode ion trap.The fiber serves as an integrated source of laser light, which drives the quadrupole qubit transition of 88 Sr + .Using in situ translation of the ion, the Gaussian beam profile of the fiber output is imaged, and the fiberion displacement, in units of the mode waist at the ion, is optimized to within 0.13 ± 0.10 of the mode center despite an initial offset of 3.30 ± 0.10 arising from fabrication.We also quantify the perturbative effects of the fiber dielectric on ion trap operation.Light-induced charging by 125 µW of 674 nm fiber light is measured as an induced electric field of ∼ 10 V/m at the ion, with charging and discharging time constants of 1.6 ± 0.3 s and 4.7 ± 0.6 s.These measurements are of general importance to trapped-ion quantum computing, where the scalability of the platform depends crucially on the feasibility of on-chip optics integration.
An atomic ion is trapped at the tip of a single-mode optical fiber in a cryogenic (8 K) surface-electrode ion trap. The fiber serves as an integrated source of laser light, which drives the quadrupole qubit transition of S88r+. Through in situ translation of the nodal point of the trapping field, the Gaussian beam profile of the fiber output is imaged, and the fiber-ion displacement, in units of the mode waist at the ion, is optimized to within 0.13±0.10 of the mode center despite an initial offset of 3.30±0.10. Fiber-induced charging by 125 μW of 674 nm light is observed to be ∼10 V/m at an ion height of 670 μm, with charging and discharging time constants of 1.6±0.3 s and 4.7±0.6 s, respectively. This work is of importance to large-scale, ion-based quantum information processing, where optics integration in surface-electrode designs may be a crucial enabling technology.
Quantum information processing is a new and exciting field which uses quantum mechanical systems to perform information processing. At the heart of the excitement are quantum computation - which promises efficient algorithms for simulating physical systems, factoring, and searching unsorted databases - and quantum communication - which provides a provably secure communications protocol. Trapped ions show much promise for achieving large-scale quantum information processing. Experiments thus far have demonstrated small algorithms and entanglement of two remote ions. Current work focuses on scaling to large numbers of ions for quantum computation and interconversion between trapped ions and photons for quantum communication. This thesis addresses some of the challenges facing scaling and interconversion for trapped ion quantum information processing. The first part of the thesis describes the development of scalable, multiplexed ion trap chips for quantum computation. The ion trap chips are based on a new ion trap geometry, called the surface-electrode trap, in which all of the electrodes reside in a single plane. Three generations of surface-electrode traps are designed, fabricated, and tested - culminating with the demonstration of an ion trap chip microfabricated using standard silicon VLSI materials and processes for scalability to small trap size and large arrays of interconnected ion traps. The second part of the thesis presents an experiment that demonstrates cavity cooling, a method of laser cooling the motional state of trapped ions without decohering the internal qubit state.
Atomic ions trapped in microfabricated surface traps can be utilized as a physical platform with which to build a quantum computer. They possess many of the desirable characteristics of such a device, including high fidelity state preparation and readout, universal logic gates, and long coherence times, and can be readily entangled with each other through photonic interconnects. The use of optical cavities integrated with trapped ion qubits as a photonic interface presents the possibility for order of magnitude improvements in performance in several key areas for their use in quantum computation. The first part of this thesis describes the design and fabrication of a novel surface trap for integration with an optical cavity. The trap is custom made on a highly reflective mirror surface and includes the capability of moving the ion trap location along all three trap axes with nanometer scale precision. The second part of this thesis demonstrates the suitability of small microcavities formed from laser ablated, fused silica substrates with radii of curvature in the 300-500 micron range for use with the mirror trap as part of an integrated ion trap cavity system. Quantum computing applications for such a system include dramatic improvements in the photon entanglement rate of up to 10 kHz, the qubit measurement time down to 1 microsecond, and the qubit measurement error rate down to the 1e-5 range. The final part of this thesis describes a performance simulator for exploring the physical resource requirements and performance demands to scale a quantum computer to sizes capable of implementing quantum algorithms beyond the limits of classical computation.
Integration of fiber optics may play a critical role in the development of quantum information processors based on trapped ions and atoms by enabling scalable collection and delivery of light and coupling trapped ions to optical microcavities. We trap 24Mg+ ions in a surface-electrode Paul trap that includes an integrated optical fiber for detecting 280-nm fluorescence photons. The collection numerical aperture is 0.37, and total collection efficiency is 2.1%. The ion can be positioned between 80 and 100 μm from the tip of the fiber by use of an adjustable rf pseudopotential.
The controlled emission and absorption of single photons is an important enabling technology in the fields of quantum communication, cryptography and computing. We have realised a novel single photon source, based on a miniature ‘endcap’ ion trap with integrated optical fibres. To minimise distortion of the trapping field the fibres are tightly integrated and recessed within the two hollow cylindrical rf electrodes of the trap. This allows us to bring the fibres to within approximately 300 µm of the trapped ion. With the fibres in place we are able to collect the ion’s fluorescence using no further optics. In this thesis the ion trap is fully characterised, and the quantum nature of the light demonstrated in the results of a variant on the Hanbury Brown-Twiss photon-correlation experiment. The scheme will ultimately be extended to implement a coherent ion-photon interface through strong coupling cavity-QED. Towards this end, an ultra-high-finesse cavity has been designed and fabricated by laser-machining and coating surfaces with a range of radii of curvature on the end facets of the fibres. To improve the stability and precision manipulation of the cavity in-vacuum, an entirely new trap has been designed and built. Finally, the current status of the fibre cavity and the outlook for the experiment are presented.
Ion trap systems allow the faithful storage and manipulation of qubits encoded in the energy levels of the ions, and can be interfaced with photonic qubits that can be transmitted to connect remote quantum systems. Single photons transmitted from two remote sites, each entangled with one quantum memory, can be used to entangle distant quantum memories by interfering on a beam splitter. Efficient remote entanglement generation relies upon efficient light collection from single ions into a single mode fiber. This can be realized by integrating an ion trap with an optical cavity and employing the Purcell effect for enhancing the light collection. Remote entanglement can be used as a resource for a quantum repeater for provably secure long-distance communication or as a method for communicating within a distributed quantum information processor. I present the integration of a 1 mm optical cavity with a micro-fabricated surface ion trap. The plano-concave cavity is oriented normal to the chip surface where the planar mirror is attached underneath the trap chip. The cavity is locked using a 780 nm laser which is stabilized to Rubidium and shifted to match the 369 nm Doppler transition in Ytterbium. The linear ion trap allows ions to be shuttled in and out of the cavity mode. The Purcell enhancement of spontaneous emission into the cavity mode would then allow efficient collection of the emitted photons, enabling faster remote entanglement generation.