Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:quant-ph/0106007 · Journal of Modern Optics

Photon counting for quantum key distribution with Peltier cooled InGaAs/InP APDs

Damien Stucki, G. Ribordy, André Stefanov, Hugo Zbinden, John Rarity, Tom Wall

Published Nov 1, 2001• 156 citations
arXivHTMLPDF

Abstract

The performance of three types of InGaAs/InP avalanche photodiodes is investigated for photon counting at 1550 nm in the temperature range of thermoelectric cooling. The best one yields a dark count probability of 2.8 × 10−5 per gate (2.4 ns) at a detection efficiency of 10% and a temperature of -60°C. The afterpulse probability and the timing jitter are also studied. The results obtained are compared with those of other papers and applied to the simulation of a quantum key distribution system. An error rate of 10% would be obtained after 54 km.

DOI
10.1080/09500340108240900

Related papers

Single-photon detector for long-distance fiber-optic quantum key distribution

Naoto Namekata, Yuuki Makino, Shuichiro Inoue

We have investigated the performance of an InGaAs/InP avalanche photodiode for photon counting at 1550 nm in the temperature range of thermoelectric cooling. A quantum efficiency of 13.7% was obtained at -55 degrees C , while the dark-count probability per gate (?1 ns) was kept as small as 2.4x10(-5) . The developed single-photon detector would yield a 104.4-km fiber-optic quantum key distribution in the ideal condition.

Optics Letters•Jun 1, 2002•56 citations

Single Photon Detector at Telecom Wavelengths for Quantum Key Distribution

Yun Liu, Qing-Lin Wu, Zheng‐Fu Han +2 more

Using InGaAs/InP avalanche photodiodes as sensors and coaxial cables as reflection lines to reject spike signals, we have firstly employed the ``timing filtering'' gates to pick out avalanche signals and have realized the single photon detection at 1550 nm in the temperature range of thermoelectric cooling. A ratio of the dark count rate to the detection efficiency was obtained to be 9 × 10 −5 at 223 K. When the detector is applied to a practical quantum key distribution system, the transmission distance can reach 89.5 km and the repetition rate can reach 0.33 MHz.

Chinese Physics Letters•Jan 1, 2006•6 citations

Single photon counting at telecom wavelength and quantum key distribution

Alexei S. Trifonov, Darius Subacius, Audrius Berzanskis +1 more

A brief overview is given of single photon detector performance requirements for quantum cryptography applications. The analysis is made with respect to restrictions necessary to secure the quantum key distribution channel. InGaAs/InP avalanche photodiode performance is analysed for single photon counting at 1550 nm. Quantum efficiency, dark current and afterpulsing probability (for times up to 100μs after an initial avalanche) are studied in a wider temperature range than previously reported (0deg; C to –80deg;C). We show that photon counting is a bottle-neck in current quantum key distribution systems and provides the source for future performance improvement.

Journal of Modern Optics•Jan 1, 2004•51 citations

Single-photon detector at 1550 nm with gate-mode quenched InGaAs/InP avalanche photodiode

Guang Wu, Chunyuan Zhou, Xiuliang Chen +2 more

In our recent experiment, we have designed a novel single-photon detecting module for quantum key distribution using an InGaAs/InP avalanche photodiode with gate-mode quenched photo-detection. At a repetition rate of 100 kHz and the working temperature of -60°C, we obtained the detection efficiency η higher than 10% and 20% at the dark probability Pd about 1.3×10-5 and 1.6×10-5 per nanosecond, respectively. Also at 100 kHz, we got the best ratio of Pd/η as 1.7×10-3 per pulse (20 ns). And at a lower repetition such as 10 kHz, we obtained Pd/η as 8.9×10-4 per pulse.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 12, 2004•2 citations

High-rate quantum key distribution over 100 km using ultra-low-noise, 2-GHz sinusoidally gated InGaAs/InP avalanche photodiodes

Naoto Namekata, Hiroki Takesue, Toshimori Honjo +2 more

We have demonstrated quantum key distribution (QKD) over 100 km using single-photon detectors based on InGaAs/InP avalanche photodiodes (APDs). We implemented the differential phase shift QKD (DPS-QKD) protocol with electrically cooled and 2-GHz sinusoidally gated APDs. The single-photon detector has a dark count probability of 2.8 × 10(-8) (55 counts per second) with a detection efficiency of 6 %, which enabled us to achieve 24 kbit/s secure key rate over 100 km of optical fiber. The DPS-QKD system offers better performances in a practical way than those achieved using superconducting single-photon detectors. Moreover, the distance that secure keys against the general individual attacks can be distributed has been extended to 160 km.

Optics Express•May 16, 2011•82 citations

Single-photon detectors for practical quantum cryptography

Alberto Tosi, Franco Zappa, S. Cova

The implementation and commercialization of quantum cryptography technologies have to face some challenges related to the development of single-photon detectors operating at 1550 nm. The main requirements are: i) high detection efficiency; ii) low noise; iii) high count rate; iv) low timing jitter. Different technologies are currently available for single-photon detection at 1550 nm, but semiconductor devices (like Single-Photon Avalanche Diode, SPAD) offer a photon detection efficiency that is inherently higher than any photocathode employed in vacuum tube detectors. Additionally InGaAs/InP SPADs can detect single photons at 1550 nm with low noise when moderately cooled by means of thermo-electric coolers. Consequently, InGaAs/InP SPAD can be the enabling technology of practical quantum key distribution (QKD) systems, provided that the maximum count rate is increased above 1 Mcps. The main limit is the afterpulsing effect that usually sets too long (< 10 μs) a hold-off time after each avalanche ignition. We present the developments achieved in InGaAs/InP SPAD device design, fabrication technology and front-end electronics, aimed at decreasing the afterpulsing effect, while not impairing photon detection efficiency and timing jitter. The new InGaAs/InP SPADs provide count rates higher than 1 Mcps and temporal response with 60 ps Full-Width at Half Maximum and very short (30 ps time constant) tail. The front-end electronics includes a wide-band pulse generator able to gate the SPAD up to 133 MHz repetition rate. Eventually, a fast avalanche-quenching scheme minimizes quenching time to less than 1 ns, thus effectively reducing afterpulsing by decreasing the total charge flowing through the junction.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 19, 2012•15 citations
The performance of three types of InGaAs/InP avalanche photodiodes is investigated for photon counting at 1550 nm in the temperature range of thermoelectric cooling. The best one yields a dark count probability of 2.8 × 10−5 per gate (2.4 ns) at a detection efficiency of 10% and a temperature of -60°C. The afterpulse probability and the timing jitter are also studied. The results obtained are compared with those of other papers and applied to the simulation of a quantum key distribution system. An error rate of 10% would be obtained after 54 km.
Using InGaAs/InP avalanche photodiodes as sensors and coaxial cables as reflection lines to reject spike signals, we have firstly employed the ``timing filtering'' gates to pick out avalanche signals and have realized the single photon detection at 1550 nm in the temperature range of thermoelectric cooling. A ratio of the dark count rate to the detection efficiency was obtained to be 9 × 10 −5 at 223 K. When the detector is applied to a practical quantum key distribution system, the transmission distance can reach 89.5 km and the repetition rate can reach 0.33 MHz.
A brief overview is given of single photon detector performance requirements for quantum cryptography applications. The analysis is made with respect to restrictions necessary to secure the quantum key distribution channel. InGaAs/InP avalanche photodiode performance is analysed for single photon counting at 1550 nm. Quantum efficiency, dark current and afterpulsing probability (for times up to 100μs after an initial avalanche) are studied in a wider temperature range than previously reported (0deg; C to –80deg;C). We show that photon counting is a bottle-neck in current quantum key distribution systems and provides the source for future performance improvement.
In our recent experiment, we have designed a novel single-photon detecting module for quantum key distribution using an InGaAs/InP avalanche photodiode with gate-mode quenched photo-detection. At a repetition rate of 100 kHz and the working temperature of -60°C, we obtained the detection efficiency η higher than 10% and 20% at the dark probability Pd about 1.3×10-5 and 1.6×10-5 per nanosecond, respectively. Also at 100 kHz, we got the best ratio of Pd/η as 1.7×10-3 per pulse (20 ns). And at a lower repetition such as 10 kHz, we obtained Pd/η as 8.9×10-4 per pulse.
We have demonstrated quantum key distribution (QKD) over 100 km using single-photon detectors based on InGaAs/InP avalanche photodiodes (APDs). We implemented the differential phase shift QKD (DPS-QKD) protocol with electrically cooled and 2-GHz sinusoidally gated APDs. The single-photon detector has a dark count probability of 2.8 × 10(-8) (55 counts per second) with a detection efficiency of 6 %, which enabled us to achieve 24 kbit/s secure key rate over 100 km of optical fiber. The DPS-QKD system offers better performances in a practical way than those achieved using superconducting single-photon detectors. Moreover, the distance that secure keys against the general individual attacks can be distributed has been extended to 160 km.
The implementation and commercialization of quantum cryptography technologies have to face some challenges related to the development of single-photon detectors operating at 1550 nm. The main requirements are: i) high detection efficiency; ii) low noise; iii) high count rate; iv) low timing jitter. Different technologies are currently available for single-photon detection at 1550 nm, but semiconductor devices (like Single-Photon Avalanche Diode, SPAD) offer a photon detection efficiency that is inherently higher than any photocathode employed in vacuum tube detectors. Additionally InGaAs/InP SPADs can detect single photons at 1550 nm with low noise when moderately cooled by means of thermo-electric coolers. Consequently, InGaAs/InP SPAD can be the enabling technology of practical quantum key distribution (QKD) systems, provided that the maximum count rate is increased above 1 Mcps. The main limit is the afterpulsing effect that usually sets too long (< 10 μs) a hold-off time after each avalanche ignition. We present the developments achieved in InGaAs/InP SPAD device design, fabrication technology and front-end electronics, aimed at decreasing the afterpulsing effect, while not impairing photon detection efficiency and timing jitter. The new InGaAs/InP SPADs provide count rates higher than 1 Mcps and temporal response with 60 ps Full-Width at Half Maximum and very short (30 ps time constant) tail. The front-end electronics includes a wide-band pulse generator able to gate the SPAD up to 133 MHz repetition rate. Eventually, a fast avalanche-quenching scheme minimizes quenching time to less than 1 ns, thus effectively reducing afterpulsing by decreasing the total charge flowing through the junction.