Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:cond-mat/0210247

Qubits as Spectrometers of Quantum Noise

R. J. Schoelkopf, A. A. Clerk, S. M. Girvin, Konrad W. Lehnert, Michel Devoret

Published Oct 10, 2002• 53 citations
arXivHTMLPDF

Abstract

Electrical engineers and physicists are naturally very interested in noise in circuits, amplifiers and detectors. With the advent of quantum computation and other high frequency electronics operating at low temperatures, we have entered a regime where quantum noise and quantum-limited detectors are important. In this paper we describe the general concept of a two-level system as a quantum spectrum analyzer and apply it to a simple superconducting qubit, the Cooper-pair box. We derive and discuss the quantum noise associated with both a resistor and a classical tunnel junction, and study the effect these noise sources will have on a Cooper-pair box. Finally, we describe a theoretical technique for calculating quantum noise which involves studying the noisy system of interest coupled to a two-level system. We use this technique to calculate and give a heuristic explanation of the quantum charge noise of a normal metal single electron transistor.

DOI
10.48550/arxiv.cond-mat/0210247

Related papers

Noise and measurement backaction in superconducting circuits: qubits as spectrometers of quantum noise

Robert J. Schoelkopf, Aashish A. Clerk, S. M. Girvin +2 more

Electrical engineers and physicists are naturally very interested in noise in circuits, amplifiers and detectors. With the advent of quantum computation and other high frequency electronics operating at low temperatures, we have entered a regime where quantum noise and quantum-limited detectors are important. Here we describe the general concept of a two-level system as a quantum spectrum analyzer and apply it to a simple superconducting qubit, the Cooper-pair box. We then discuss the coupling of a Cooper-pair box to its electromagnetic environment, whose noise leads to a finite polarization and excited-state lifetime of the qubit. Finally, we describe a theoretical technique for treating a qubit coupled to a measurement system, which allows one to calculate the full quantum noise of the measurement device. We present results for such a calculation for the case of a normal SET.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 9, 2003•8 citations

Detection of Quantum Noise from an Electrically Driven Two-Level System

R. Deblock, Eugen Onac, Leonid Gurevich +1 more

The electrical noise of mesoscopic devices can be strongly influenced by the quantum motion of electrons. To probe this effect, we have measured the current fluctuations at high frequency (5 to 90 gigahertz) using a superconductor-insulator-superconductor tunnel junction as an on-chip spectrum analyzer. By coupling this frequency-resolved noise detector to a quantum device, we can measure the high-frequency, nonsymmetrized noise as demonstrated for a Josephson junction. The same scheme is used to detect the current fluctuations arising from coherent charge oscillations in a two-level system, a superconducting charge qubit. A narrow band peak is observed in the spectral noise density at the frequency of the coherent charge oscillations.

arXiv:cond-mat/0310180•Science•Jul 10, 2003•180 citations

Full-frequency voltage noise spectral density of a single-electron transistor

Andreas Käck, Goran P. Wendin, Göran Johansson

We calculate the full-frequency spectral density of voltage fluctuations in a single-electron transistor (SET), used as an electrometer biased above the Coulomb threshold so that the current through the SET is carried by sequential tunneling events. We consider both a normal-state SET and a superconducting SET. The whole spectrum, from low-frequency telegraph noise to quantum noise at frequencies comparable to the SET charging energy ${(E}_{C}/\ensuremath{\Elzxh})$ to high-frequency Nyquist noise, is described. We take the energy exchange between the SET and the measured system into account using a real-time diagrammatic Keldysh technique. The voltage fluctuations determine the backaction of the SET on the measured system, and we specifically discuss the case of superconducting charge qubit read-out and measuring the so-called Coulomb staircase of a single Cooper-pair box.

arXiv:cond-mat/0211055•Physical review. B, Condensed matter•Jan 6, 2003•24 citations

Superconducting Qubits and Environmental Noise

Elias J. Griffith

We examine the energy level structure of a Josephson charge qubit (Cooper pair box) coupled to its environment, utilising a backreaction technique originally proposed for characterising persistent current qubits. The system consists of a model charge qubit coupled to three electromagnetic modes: a low frequency bias field, a higher frequency microwave to excite the qubit into higher states, and a lossy reservoir representing the cavity containing the qubit and control fields. Specifically, the qubit is a small superconducting island connected to a bulk superconductor via a weak Josephson junction, allowing Cooper pairs to tunnel on and off the island coherently. The classical bias field experiences a backreaction from the qubit and the noise power increases when the qubit is operating near a transition.

AIP conference proceedings•Jan 1, 2004•1 citation

Quantum Coherence in the Single Cooper Pair Box

Kevin Bladh

This thesis presents measurements of quantum coherence in a single Cooper pair box, where quantum oscillations of charge between a reservoir and a small superconducting island have been observed. The single Cooper pair box (SCB) consists of a small metallic island which is connected to a reservoir via a tunnel junction. In the superconducting state, Cooper pairs are free to tunnel to and from the island, whose potential can be controlled by a gate voltage. A graded gap method was used to prevent quasiparticles from tunneling onto the island. For this purpose, a magnetic field suppressed the superconducting gap in the SCB leads more than in the island. This created an additional energy barrier for quasiparticles to tunnel to the island, making the gate voltage modulation periodic in Cooper pair charge. For a limited range of gate voltage, the SCB was found to behave as a model two-level quantum mechanical system. A non-adiabatic change in the induced island charge was used to bring two charge states into resonance. The resulting time evolution showed clear charge oscillations between the ground and excited state, with a frequency given by the energy level separation divided by Planck's constant. These oscillations had a longest coherence time of T2=9 ns at a point where the pure charge states are degenerate. The coherence time at this point was found to be limited by the relaxation rate, ?1. Away from this point, the coherence time was limited by the dephasing rate, ??. Away from the charge degeneracy, the dependence of T2 on gate charge suggested that low frequency fluctuators were the main source of dephasing. The charge of the Cooper pair box was measured by coupling the SCB capacitively to a radio frequency single electron transistor (RF-SET). The RF-SET was used as an electrometer by measuring the amount of reflection from a resonant microwave circuit in which a single electron transistor (SET) was embedded. A best charge sensitivity of 2.3·10-6 e/sqrt(Hz) and a 7 MHz bandwidth was reached in an improved setup. Another part of this thesis concerns an investigation of electrical filters for use in single electronics experiments. The characteristics of seven different types of cryogenic filters were evaluated.

•Jan 1, 2005•3 citations

Decoherence and Dephasing Rates of the Fluxonium Qubit Under the Influence of Charge Noise

Aakash Lakshmanan

Quantum computing provides significantly more efficient methods than classical computers for doing rigorous calculations such as encryption, search algorithms, and physical simulations. This is accomplished through the use of qubits which exist in a superposition of multiple states at once allowing for both complex and fast calculations. Environmental fluctuations interfere with these states and resulting in decoherence and dephasing and the break down of the algorithm. One type of qubit is the fluxonium: a superconducting artificial atom derived from the Cooper pair box. The purpose of this project was to analyze the effect of charge noise on the fluxonium qubit which, in the past, has never systematically been done before. Charge noise enters the qubit in the form of 1/f noise resulting in interference with the Cooper pairs, two loosely bound electrons, hopping between the superconducting island and reservoir. A program was developed to simulate the qubit's state over time by solving a stochastic differential Schrodinger equation numerically. The program simulated the noise by using its 1/f power spectrum. Looking into the both its wavefunction and density matrix, its dephasing and decoherence rates were determined for different inductive, capacitive, and Josephson energies. Results will be presented.

•Jan 1, 2016•0 citations
Electrical engineers and physicists are naturally very interested in noise in circuits, amplifiers and detectors. With the advent of quantum computation and other high frequency electronics operating at low temperatures, we have entered a regime where quantum noise and quantum-limited detectors are important. In this paper we describe the general concept of a two-level system as a quantum spectrum analyzer and apply it to a simple superconducting qubit, the Cooper-pair box. We derive and discuss the quantum noise associated with both a resistor and a classical tunnel junction, and study the effect these noise sources will have on a Cooper-pair box. Finally, we describe a theoretical technique for calculating quantum noise which involves studying the noisy system of interest coupled to a two-level system. We use this technique to calculate and give a heuristic explanation of the quantum charge noise of a normal metal single electron transistor.
Electrical engineers and physicists are naturally very interested in noise in circuits, amplifiers and detectors. With the advent of quantum computation and other high frequency electronics operating at low temperatures, we have entered a regime where quantum noise and quantum-limited detectors are important. Here we describe the general concept of a two-level system as a quantum spectrum analyzer and apply it to a simple superconducting qubit, the Cooper-pair box. We then discuss the coupling of a Cooper-pair box to its electromagnetic environment, whose noise leads to a finite polarization and excited-state lifetime of the qubit. Finally, we describe a theoretical technique for treating a qubit coupled to a measurement system, which allows one to calculate the full quantum noise of the measurement device. We present results for such a calculation for the case of a normal SET.
The electrical noise of mesoscopic devices can be strongly influenced by the quantum motion of electrons. To probe this effect, we have measured the current fluctuations at high frequency (5 to 90 gigahertz) using a superconductor-insulator-superconductor tunnel junction as an on-chip spectrum analyzer. By coupling this frequency-resolved noise detector to a quantum device, we can measure the high-frequency, nonsymmetrized noise as demonstrated for a Josephson junction. The same scheme is used to detect the current fluctuations arising from coherent charge oscillations in a two-level system, a superconducting charge qubit. A narrow band peak is observed in the spectral noise density at the frequency of the coherent charge oscillations.
We calculate the full-frequency spectral density of voltage fluctuations in a single-electron transistor (SET), used as an electrometer biased above the Coulomb threshold so that the current through the SET is carried by sequential tunneling events. We consider both a normal-state SET and a superconducting SET. The whole spectrum, from low-frequency telegraph noise to quantum noise at frequencies comparable to the SET charging energy ${(E}_{C}/\ensuremath{\Elzxh})$ to high-frequency Nyquist noise, is described. We take the energy exchange between the SET and the measured system into account using a real-time diagrammatic Keldysh technique. The voltage fluctuations determine the backaction of the SET on the measured system, and we specifically discuss the case of superconducting charge qubit read-out and measuring the so-called Coulomb staircase of a single Cooper-pair box.
We examine the energy level structure of a Josephson charge qubit (Cooper pair box) coupled to its environment, utilising a backreaction technique originally proposed for characterising persistent current qubits. The system consists of a model charge qubit coupled to three electromagnetic modes: a low frequency bias field, a higher frequency microwave to excite the qubit into higher states, and a lossy reservoir representing the cavity containing the qubit and control fields. Specifically, the qubit is a small superconducting island connected to a bulk superconductor via a weak Josephson junction, allowing Cooper pairs to tunnel on and off the island coherently. The classical bias field experiences a backreaction from the qubit and the noise power increases when the qubit is operating near a transition.
This thesis presents measurements of quantum coherence in a single Cooper pair box, where quantum oscillations of charge between a reservoir and a small superconducting island have been observed. The single Cooper pair box (SCB) consists of a small metallic island which is connected to a reservoir via a tunnel junction. In the superconducting state, Cooper pairs are free to tunnel to and from the island, whose potential can be controlled by a gate voltage. A graded gap method was used to prevent quasiparticles from tunneling onto the island. For this purpose, a magnetic field suppressed the superconducting gap in the SCB leads more than in the island. This created an additional energy barrier for quasiparticles to tunnel to the island, making the gate voltage modulation periodic in Cooper pair charge. For a limited range of gate voltage, the SCB was found to behave as a model two-level quantum mechanical system. A non-adiabatic change in the induced island charge was used to bring two charge states into resonance. The resulting time evolution showed clear charge oscillations between the ground and excited state, with a frequency given by the energy level separation divided by Planck's constant. These oscillations had a longest coherence time of T2=9 ns at a point where the pure charge states are degenerate. The coherence time at this point was found to be limited by the relaxation rate, ?1. Away from this point, the coherence time was limited by the dephasing rate, ??. Away from the charge degeneracy, the dependence of T2 on gate charge suggested that low frequency fluctuators were the main source of dephasing. The charge of the Cooper pair box was measured by coupling the SCB capacitively to a radio frequency single electron transistor (RF-SET). The RF-SET was used as an electrometer by measuring the amount of reflection from a resonant microwave circuit in which a single electron transistor (SET) was embedded. A best charge sensitivity of 2.3·10-6 e/sqrt(Hz) and a 7 MHz bandwidth was reached in an improved setup. Another part of this thesis concerns an investigation of electrical filters for use in single electronics experiments. The characteristics of seven different types of cryogenic filters were evaluated.
Quantum computing provides significantly more efficient methods than classical computers for doing rigorous calculations such as encryption, search algorithms, and physical simulations. This is accomplished through the use of qubits which exist in a superposition of multiple states at once allowing for both complex and fast calculations. Environmental fluctuations interfere with these states and resulting in decoherence and dephasing and the break down of the algorithm. One type of qubit is the fluxonium: a superconducting artificial atom derived from the Cooper pair box. The purpose of this project was to analyze the effect of charge noise on the fluxonium qubit which, in the past, has never systematically been done before. Charge noise enters the qubit in the form of 1/f noise resulting in interference with the Cooper pairs, two loosely bound electrons, hopping between the superconducting island and reservoir. A program was developed to simulate the qubit's state over time by solving a stochastic differential Schrodinger equation numerically. The program simulated the noise by using its 1/f power spectrum. Looking into the both its wavefunction and density matrix, its dephasing and decoherence rates were determined for different inductive, capacitive, and Josephson energies. Results will be presented.