Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optical amplifiers for coherent lidar

R. L. Fork

Published Feb 1, 1996• 0 citations
OpenAlex

Abstract

We examine application of optical amplification to coherent lidar for the case of a weak return signal (a number of quanta of the return optical field close to unity). We consider the option that has been explored to date, namely, incorporation of an optical amplifier operated in a linear manner located after reception of the signal and immediately prior to heterodyning and photodetection. We also consider alternative strategies where the coherent interaction, the nonlinear processes, and the amplification are not necessarily constrained to occur in the manner investigated to date. We include the complications that occur because of mechanisms that occur at the level of a few, or one, quantum excitation. Two factors combine in the work to date that limit the value of the approach. These are: (1) the weak signal tends to require operation of the amplifier in the linear regime where the important advantages of nonlinear optical processing are not accessed, (2) the linear optical amplifier has a -3dB noise figure (SN(out)/SN(in)) that necessarily degrades the signal. Some improvement is gained because the gain provided by the optical amplifier can be used to overcome losses in the heterodyned process and photodetection. The result, however, is that introduction of an optical amplifier in a well optimized coherent lidar system results in, at best, a modest improvement in signal to noise. Some improvement may also be realized on incorporating more optical components in a coherent lidar system for purely practical reasons. For example, more compact, lighter weight, components, more robust alignment, or more rapid processing may be gained. We further find that there remain a number of potentially valuable, but unexplored options offered both by the rapidly expanding base of optical technology and the recent investigation of novel nonlinear coherent interference phenomena occurring at the single quantum excitation level. Key findings are: (1) insertion of linear optical amplifiers in well optimized conventional lidar systems offers modest improvements, at best, (2) the practical advantages of optical amplifiers, especially fiber amplifiers, such as ease of alignment, compactness, efficiency, lightweight, etc., warrant further investigation for coherent lidar, (3) the possibility of more fully optical lidar systems should be explored, (4) advantages gained by use of coherent interference of optical fields at the level of one, or a few, signal quanta should be explored, (5) amplification without inversion, population trapping, and use of electromagnetic induced transparency warrant investigation in connection with coherent lidar, (6) these new findings are probably more applicable to earth related NASA work, although applications to deep space should not be excluded, and (7) our own work in the Ultrafast Laboratory at UAH along some of the above lines of investigation, may be useful.

Related papers

Laser Amplifiers

Bahaa E. A. Saleh, Malvin Carl Teich

A coherent optical amplifier is a device that increases the amplitude of an optical field while maintaining its phase. If the optical field at the input to such an amplifier is monochromatic, the output will also be monochromatic, with the same frequency. The output amplitude is increased relative to the input while the phase is unchanged or shifted by a fixed amount. In contrast, an amplifier that increases the intensity of an optical wave without preserving the phase is called an incoherent optical amplifier. This chapter is concerned with coherent optical amplifiers. Such amplifiers are important for various applications; examples include the amplification of weak optical pulses such as those that have traveled through a long length of optical fiber, and the production of highly intense optical pulses such as those required for laser-fusion applications. Furthermore, it is important to understand the principles underlying the operation of optical amplifiers as a prelude to the discussion of optical oscillators. Light transmitted through matter in thermal equilibrium is attenuated rather than amplified. This is because absorption by the large population of atoms in the lower energy level is more prevalent than stimulated emission by the smaller population of atoms in the upper level. An essential ingredient for achieving laser amplification is the presence of a greater number of atoms in the upper energy level than in the lower level, which is clearly a nonequilibrium situation. Achieving such a population inversion requires a source of power to excite (pump) the atoms into the higher energy level. Although the presentation throughout this chapter is couched in terms of “atoms” and “atomic levels,” these appelations are to be more broadly understood as “active medium” and “laser energy levels,” respectively. The properties of an ideal (optical or electronic) coherent amplifier are displayed schematically. Real coherent amplifiers deliver a gain and phase shift that are frequency dependent, typically in the manner illustrated here. The gain and phase shift constitute the amplifier's transfer function. For a sufficiently high input amplitude, furthermore, real amplifiers may exhibit saturation, a form of nonlinear behavior in which the output amplitude fails to increase in proportion to the input amplitude. Saturation introduces harmonic components into the output, provided that the amplifier bandwidth is sufficiently broad to pass them. Real amplifiers also introduce noise, so that a randomly fluctuating component is always present at the output, regardless of the input. An amplifier may therefore be characterized by the following features: ▪ gain; ▪ bandwidth; ▪ phase shift; ▪ power source; ▪ nonlinearity and gain saturation, and ▪ noise We proceed to discuss these characteristics in turn in this chapter. The theory of laser amplification is developed, leading to expressions for the amplifier gain, spectral bandwidth, and phase shift. The mechanisms by which an amplifier power source can achieve a population inversion are examined. Gain saturation and noise in the amplification process, are discussed respectively. This chapter relies on material presented in Chap. 12.

Wiley eBooks•Aug 14, 1991•2 citations

Photodetection Techniques

Silvano Donati

In this chapter, the authors describe advanced photodetection techniques that represent nonconventional treatment of the optical signal or new approaches based on special properties of the electromagnetic optical field. They start with optical preamplification, the most mature technique, and then describe injection detection, an extension of coherent detection, to continue with non-demolitive detection and detection of squeezed states that exploit second quantization principles. Optical preamplification of weak signals before their photodetection has become a realistic option since the advent of optical amplifiers, which are largely employed for the repeaterless regeneration of long-haul transmission systems using optical fibers. The authors consider two important applications: measurement of ultrafast pulses and use of single-photon detectors in Laser Identification, Detection and Ranging (LIDAR) and in quantum communications. An example of an automotive LIDAR embedded in the headlight of a car is illustrated.

Wiley eBooks•Dec 15, 2020•1 citation

A high-gain and high-fidelity coherent state comparison amplifier

Ross J. Donaldson, Luca Mazzarella, Robert John Collins +2 more

Abstract Optical signals are subject to a distance-dependent loss as they propagate through transmission media. High-intensity, classical, optical signals can routinely be amplified to overcome the degradation caused by this loss. However, quantum optical states cannot be deterministically amplified and any attempt to do so will introduce intrinsic noise that spoils the desired quantum properties. Non-deterministic optical amplification, based on post-selection of the output depending on certain conditioning detection outcomes, is an emerging enabling technology in quantum measurement and quantum communications. Here we present an investigation into the properties of a simple, modular optical state comparison amplifier operating on weak coherent states. This amplifier requires no complex quantum resources and is based on linear optical components allowing for a high amplification rate at high gain and fidelity. We examine the amplifier’s performance in different configurations and develop an accurate analytical model that accounts for typical experimental scenarios.

Communications Physics•Sep 6, 2018•16 citations

Quantum lidar scenario with simple detection

John Jeffers

Quantum Lidar is a future technology that can mean different things to different people. To some it means detection and identification of classical-type lidar signals reflected from an illuminated target at or near the single photon level. This is facilitated by advances in semiconductor detector technology that allow highly efficient photocounting. To others it is more stringent, requiring exploitation of covertness associated with being essentially undetectable by the target in a thermal background, whilst allowing the lidar operator to filter her own signal from this noise. Again there is nothing specifically quantum about this. Any source that mimics of the energy rate per bandwidth seen by the illuminated object in the direction of the source can appear covert. In order to exploit quantum optics one can use inherent correlations, whether entangled or otherwise between light beams. Simple correlated optical beams can do this in two ways, perhaps by storing one beam as a reference and later performing correlated detection with the return signal in a phase sensitive manner. This is the “gold standard” for quantum lidar, but will be difficult outside of laboratory situations. In microscopy such phase control might be possible, or perhaps in the radio or microwave region for a quantum radar. Less challenging is a scenario in which an immediate local measurement of one beam conditions the beam sent to the target, allowing the return signal to be sifted from noise more easily. Here we will consider such a simple system, providing a range equation for a basic quantum lidar if it is to be operated covertly or openly. Open operation allows increased quantum signal brightness but also provides a quantum advantage, unspoofability – the lidar operator can in principle recognise their own return signal. We will also provide an analysis of quantum lidar detection based on quantum hypothesis testing and use this to perform Monte Carlo simulation of both target detections and false positive avoidance in a noisy background. The theory will be applied to experimental data.

Emerging Imaging and Sensing Technologies for Security and Defence; and Advanced Manufacturing Technologies for Micro- and Nanosystems in Security and Defence•Sep 18, 2020•1 citation

Opportunities and Challenges in Quantum-Enhanced Optical Target Detection

Han Liu, Amr S. Helmy

The goal of optical target detection is to identify the presence or absence of a target object by using light or photons as the transmitter. This technique offers significant advantages, such as high resolution and precise directionality, and plays a key role in applications like LiDAR. One of the critical performance metrics in optical target detection is noise resilience─specifically, the system’s ability to distinguish reflected signals from crosstalk or jamming sources with similar optical properties. Traditionally, this challenge has been addressed through classical information processing or standard optical filtering methods. However, a new approach to improving noise resilience has recently captured the attention of numerous researchers: harnessing the unique properties of quantum light sources. These sources offer performance enhancements that are challenging or even impossible to achieve with conventional coherent optical sources. In this perspective, we examine the performance and limitations of this emerging method, including challenges related to receiver complexity and power scaling. We also explore potential strategies to overcome these limitations, highlighting the practical advantages these approaches could offer.

ACS Photonics•Mar 6, 2025•4 citations

Fiber-based phase-sensitive optical amplifiers and their applications

Peter A. Andrekson, Magnus Karlsson

Optical parametric amplifiers rely on second-order susceptibility (three-wave mixing) or third-order susceptibility (four-wave mixing) in a nonlinear process where the energy of incoming photons is not changed (elastic scattering). In the latter case, two pump photons are converted to a signal and to an idler photon. Under certain conditions, related to the phase evolution of the waves involved, this conversion can be very efficient, resulting in large amplification of an input signal. As the nonlinear process can be very fast, all-optical applications aside from pure amplification are also possible. If the amplifier is implemented in an optical input-phase-sensitive manner, it is possible to amplify a signal wave without excess noise, i.e., with a noise figure of 0 dB. In this paper, we will provide the fundamental concepts and theory of such amplifiers, with a focus on their implementation in highly nonlinear optical fibers relying on four-wave mixing. We will discuss the distinctions between phase-insensitive and phase-sensitive operation and include several experimental results to illustrate their capability. Different applications of parametric amplifiers are also discussed, including their use in optical communication links.

Advances in Optics and Photonics•Feb 20, 2020•102 citations
We examine application of optical amplification to coherent lidar for the case of a weak return signal (a number of quanta of the return optical field close to unity). We consider the option that has been explored to date, namely, incorporation of an optical amplifier operated in a linear manner located after reception of the signal and immediately prior to heterodyning and photodetection. We also consider alternative strategies where the coherent interaction, the nonlinear processes, and the amplification are not necessarily constrained to occur in the manner investigated to date. We include the complications that occur because of mechanisms that occur at the level of a few, or one, quantum excitation. Two factors combine in the work to date that limit the value of the approach. These are: (1) the weak signal tends to require operation of the amplifier in the linear regime where the important advantages of nonlinear optical processing are not accessed, (2) the linear optical amplifier has a -3dB noise figure (SN(out)/SN(in)) that necessarily degrades the signal. Some improvement is gained because the gain provided by the optical amplifier can be used to overcome losses in the heterodyned process and photodetection. The result, however, is that introduction of an optical amplifier in a well optimized coherent lidar system results in, at best, a modest improvement in signal to noise. Some improvement may also be realized on incorporating more optical components in a coherent lidar system for purely practical reasons. For example, more compact, lighter weight, components, more robust alignment, or more rapid processing may be gained. We further find that there remain a number of potentially valuable, but unexplored options offered both by the rapidly expanding base of optical technology and the recent investigation of novel nonlinear coherent interference phenomena occurring at the single quantum excitation level. Key findings are: (1) insertion of linear optical amplifiers in well optimized conventional lidar systems offers modest improvements, at best, (2) the practical advantages of optical amplifiers, especially fiber amplifiers, such as ease of alignment, compactness, efficiency, lightweight, etc., warrant further investigation for coherent lidar, (3) the possibility of more fully optical lidar systems should be explored, (4) advantages gained by use of coherent interference of optical fields at the level of one, or a few, signal quanta should be explored, (5) amplification without inversion, population trapping, and use of electromagnetic induced transparency warrant investigation in connection with coherent lidar, (6) these new findings are probably more applicable to earth related NASA work, although applications to deep space should not be excluded, and (7) our own work in the Ultrafast Laboratory at UAH along some of the above lines of investigation, may be useful.
A coherent optical amplifier is a device that increases the amplitude of an optical field while maintaining its phase. If the optical field at the input to such an amplifier is monochromatic, the output will also be monochromatic, with the same frequency. The output amplitude is increased relative to the input while the phase is unchanged or shifted by a fixed amount. In contrast, an amplifier that increases the intensity of an optical wave without preserving the phase is called an incoherent optical amplifier. This chapter is concerned with coherent optical amplifiers. Such amplifiers are important for various applications; examples include the amplification of weak optical pulses such as those that have traveled through a long length of optical fiber, and the production of highly intense optical pulses such as those required for laser-fusion applications. Furthermore, it is important to understand the principles underlying the operation of optical amplifiers as a prelude to the discussion of optical oscillators. Light transmitted through matter in thermal equilibrium is attenuated rather than amplified. This is because absorption by the large population of atoms in the lower energy level is more prevalent than stimulated emission by the smaller population of atoms in the upper level. An essential ingredient for achieving laser amplification is the presence of a greater number of atoms in the upper energy level than in the lower level, which is clearly a nonequilibrium situation. Achieving such a population inversion requires a source of power to excite (pump) the atoms into the higher energy level. Although the presentation throughout this chapter is couched in terms of “atoms” and “atomic levels,” these appelations are to be more broadly understood as “active medium” and “laser energy levels,” respectively. The properties of an ideal (optical or electronic) coherent amplifier are displayed schematically. Real coherent amplifiers deliver a gain and phase shift that are frequency dependent, typically in the manner illustrated here. The gain and phase shift constitute the amplifier's transfer function. For a sufficiently high input amplitude, furthermore, real amplifiers may exhibit saturation, a form of nonlinear behavior in which the output amplitude fails to increase in proportion to the input amplitude. Saturation introduces harmonic components into the output, provided that the amplifier bandwidth is sufficiently broad to pass them. Real amplifiers also introduce noise, so that a randomly fluctuating component is always present at the output, regardless of the input. An amplifier may therefore be characterized by the following features: ▪ gain; ▪ bandwidth; ▪ phase shift; ▪ power source; ▪ nonlinearity and gain saturation, and ▪ noise We proceed to discuss these characteristics in turn in this chapter. The theory of laser amplification is developed, leading to expressions for the amplifier gain, spectral bandwidth, and phase shift. The mechanisms by which an amplifier power source can achieve a population inversion are examined. Gain saturation and noise in the amplification process, are discussed respectively. This chapter relies on material presented in Chap. 12.
In this chapter, the authors describe advanced photodetection techniques that represent nonconventional treatment of the optical signal or new approaches based on special properties of the electromagnetic optical field. They start with optical preamplification, the most mature technique, and then describe injection detection, an extension of coherent detection, to continue with non-demolitive detection and detection of squeezed states that exploit second quantization principles. Optical preamplification of weak signals before their photodetection has become a realistic option since the advent of optical amplifiers, which are largely employed for the repeaterless regeneration of long-haul transmission systems using optical fibers. The authors consider two important applications: measurement of ultrafast pulses and use of single-photon detectors in Laser Identification, Detection and Ranging (LIDAR) and in quantum communications. An example of an automotive LIDAR embedded in the headlight of a car is illustrated.
Abstract Optical signals are subject to a distance-dependent loss as they propagate through transmission media. High-intensity, classical, optical signals can routinely be amplified to overcome the degradation caused by this loss. However, quantum optical states cannot be deterministically amplified and any attempt to do so will introduce intrinsic noise that spoils the desired quantum properties. Non-deterministic optical amplification, based on post-selection of the output depending on certain conditioning detection outcomes, is an emerging enabling technology in quantum measurement and quantum communications. Here we present an investigation into the properties of a simple, modular optical state comparison amplifier operating on weak coherent states. This amplifier requires no complex quantum resources and is based on linear optical components allowing for a high amplification rate at high gain and fidelity. We examine the amplifier’s performance in different configurations and develop an accurate analytical model that accounts for typical experimental scenarios.
Quantum Lidar is a future technology that can mean different things to different people. To some it means detection and identification of classical-type lidar signals reflected from an illuminated target at or near the single photon level. This is facilitated by advances in semiconductor detector technology that allow highly efficient photocounting. To others it is more stringent, requiring exploitation of covertness associated with being essentially undetectable by the target in a thermal background, whilst allowing the lidar operator to filter her own signal from this noise. Again there is nothing specifically quantum about this. Any source that mimics of the energy rate per bandwidth seen by the illuminated object in the direction of the source can appear covert. In order to exploit quantum optics one can use inherent correlations, whether entangled or otherwise between light beams. Simple correlated optical beams can do this in two ways, perhaps by storing one beam as a reference and later performing correlated detection with the return signal in a phase sensitive manner. This is the “gold standard” for quantum lidar, but will be difficult outside of laboratory situations. In microscopy such phase control might be possible, or perhaps in the radio or microwave region for a quantum radar. Less challenging is a scenario in which an immediate local measurement of one beam conditions the beam sent to the target, allowing the return signal to be sifted from noise more easily. Here we will consider such a simple system, providing a range equation for a basic quantum lidar if it is to be operated covertly or openly. Open operation allows increased quantum signal brightness but also provides a quantum advantage, unspoofability – the lidar operator can in principle recognise their own return signal. We will also provide an analysis of quantum lidar detection based on quantum hypothesis testing and use this to perform Monte Carlo simulation of both target detections and false positive avoidance in a noisy background. The theory will be applied to experimental data.
The goal of optical target detection is to identify the presence or absence of a target object by using light or photons as the transmitter. This technique offers significant advantages, such as high resolution and precise directionality, and plays a key role in applications like LiDAR. One of the critical performance metrics in optical target detection is noise resilience─specifically, the system’s ability to distinguish reflected signals from crosstalk or jamming sources with similar optical properties. Traditionally, this challenge has been addressed through classical information processing or standard optical filtering methods. However, a new approach to improving noise resilience has recently captured the attention of numerous researchers: harnessing the unique properties of quantum light sources. These sources offer performance enhancements that are challenging or even impossible to achieve with conventional coherent optical sources. In this perspective, we examine the performance and limitations of this emerging method, including challenges related to receiver complexity and power scaling. We also explore potential strategies to overcome these limitations, highlighting the practical advantages these approaches could offer.
Optical parametric amplifiers rely on second-order susceptibility (three-wave mixing) or third-order susceptibility (four-wave mixing) in a nonlinear process where the energy of incoming photons is not changed (elastic scattering). In the latter case, two pump photons are converted to a signal and to an idler photon. Under certain conditions, related to the phase evolution of the waves involved, this conversion can be very efficient, resulting in large amplification of an input signal. As the nonlinear process can be very fast, all-optical applications aside from pure amplification are also possible. If the amplifier is implemented in an optical input-phase-sensitive manner, it is possible to amplify a signal wave without excess noise, i.e., with a noise figure of 0 dB. In this paper, we will provide the fundamental concepts and theory of such amplifiers, with a focus on their implementation in highly nonlinear optical fibers relying on four-wave mixing. We will discuss the distinctions between phase-insensitive and phase-sensitive operation and include several experimental results to illustrate their capability. Different applications of parametric amplifiers are also discussed, including their use in optical communication links.