In this chapter, the authors describe advanced photodetection techniques that represent nonconventional treatment of the optical signal or new approaches based on special properties of the electromagnetic optical field. They start with optical preamplification, the most mature technique, and then describe injection detection, an extension of coherent detection, to continue with non-demolitive detection and detection of squeezed states that exploit second quantization principles. Optical preamplification of weak signals before their photodetection has become a realistic option since the advent of optical amplifiers, which are largely employed for the repeaterless regeneration of long-haul transmission systems using optical fibers. The authors consider two important applications: measurement of ultrafast pulses and use of single-photon detectors in Laser Identification, Detection and Ranging (LIDAR) and in quantum communications. An example of an automotive LIDAR embedded in the headlight of a car is illustrated.
In this chapter, the authors describe advanced photodetection techniques that represent nonconventional treatment of the optical signal or new approaches based on special properties of the electromagnetic optical field. They start with optical preamplification, the most mature technique, and then describe injection detection, an extension of coherent detection, to continue with non-demolitive detection and detection of squeezed states that exploit second quantization principles. Optical preamplification of weak signals before their photodetection has become a realistic option since the advent of optical amplifiers, which are largely employed for the repeaterless regeneration of long-haul transmission systems using optical fibers. The authors consider two important applications: measurement of ultrafast pulses and use of single-photon detectors in Laser Identification, Detection and Ranging (LIDAR) and in quantum communications. An example of an automotive LIDAR embedded in the headlight of a car is illustrated.
We examine application of optical amplification to coherent lidar for the case of a weak return signal (a number of quanta of the return optical field close to unity). We consider the option that has been explored to date, namely, incorporation of an optical amplifier operated in a linear manner located after reception of the signal and immediately prior to heterodyning and photodetection. We also consider alternative strategies where the coherent interaction, the nonlinear processes, and the amplification are not necessarily constrained to occur in the manner investigated to date. We include the complications that occur because of mechanisms that occur at the level of a few, or one, quantum excitation. Two factors combine in the work to date that limit the value of the approach. These are: (1) the weak signal tends to require operation of the amplifier in the linear regime where the important advantages of nonlinear optical processing are not accessed, (2) the linear optical amplifier has a -3dB noise figure (SN(out)/SN(in)) that necessarily degrades the signal. Some improvement is gained because the gain provided by the optical amplifier can be used to overcome losses in the heterodyned process and photodetection. The result, however, is that introduction of an optical amplifier in a well optimized coherent lidar system results in, at best, a modest improvement in signal to noise. Some improvement may also be realized on incorporating more optical components in a coherent lidar system for purely practical reasons. For example, more compact, lighter weight, components, more robust alignment, or more rapid processing may be gained. We further find that there remain a number of potentially valuable, but unexplored options offered both by the rapidly expanding base of optical technology and the recent investigation of novel nonlinear coherent interference phenomena occurring at the single quantum excitation level. Key findings are: (1) insertion of linear optical amplifiers in well optimized conventional lidar systems offers modest improvements, at best, (2) the practical advantages of optical amplifiers, especially fiber amplifiers, such as ease of alignment, compactness, efficiency, lightweight, etc., warrant further investigation for coherent lidar, (3) the possibility of more fully optical lidar systems should be explored, (4) advantages gained by use of coherent interference of optical fields at the level of one, or a few, signal quanta should be explored, (5) amplification without inversion, population trapping, and use of electromagnetic induced transparency warrant investigation in connection with coherent lidar, (6) these new findings are probably more applicable to earth related NASA work, although applications to deep space should not be excluded, and (7) our own work in the Ultrafast Laboratory at UAH along some of the above lines of investigation, may be useful.
This introduction presents an overview of key concepts discussed in the subsequent chapters of this book. The book focuses on a classical model of light. It presents the properties of optical components and devices. The book provides a detailed description of lasers and amplifiers. It also presents a detailed discussion of photodetection for single photons and beams. The book explores the technical details required for reliable experimentation with quantum noise, including techniques such as cavity locking and feedback controller. It introduces the concept of squeezing is central to most attempts to improve optical devices beyond the quantum noise limit. The book describes the various squeezing experiments and discusses their results. It describes the applications of squeezed light with a detailed description of the largest application, the detection of gravitational waves. The book also discusses quantum non-demolition experiments.
The photodetection of weak light signals preliminary amplified in optical light amplifiers is analysed quantum-mechanically. A linear amplifier and a four-wave-mixing amplifier are considered. The parameters of the signal-to-noise ratio are calculated and analysed for light sources with various quantum-statistical properties. The signal-to-noise ratio for the detector photocurrent is studied as a function of the quantum-statistical properties of the signal and idler waves involved in amplification by using the four-wave-mixing scheme. The four-wave-mixing scheme with the idler wave in the coherent or Fock (squeezed, sub-Poisson) state has a higher signal-to-noise ratio compared to the linear preamplification regime.
Light Detection and Ranging (LiDAR) has emerged as a pivotal sensor across diverse domains such as autonomous driving, mapping, and remote sensing, owing to its exceptional orientation capabilities and high resolution. The detection mechanism of LiDAR is fundamentally categorized into non-coherent detection and coherent detection. Non-coherent detection employs the direct detection method, which involves measuring changes in the intensity of the reflected light signal to achieve detection. Pulse LiDAR, which determines the target range through pulsed time-of-flight measurements, falls within this classification. On the other hand, coherent detection employs heterodyne detection techniques and achieves detection by measuring the frequency or phase difference between the echo signal and the local oscillator signal. This approach is utilized in frequency modulation continuous wave (FMCW) LiDAR and Doppler speed LiDAR. LiDAR systems employing coherent detection methods can attain heightened sensitivity while operating at lower transmission power levels. However, due to the limitations posed by quantum noise, conventional LiDAR systems have encountered challenges in terms of detection sensitivity and resolution, prompting the need for advancement. In recent times, spurred by the emergence of quantum metrology, a quantum version of LiDAR has been conceptualized, promising superior precision and resolution. Leveraging the enhanced signal-to-noise ratio made possible by quantum advancements, quantum LiDAR demonstrates the potential to extend detection ranges, elevate detection accuracy, bolster anti-jamming capabilities, and enhance anti-stealth performance beyond that of classical LiDAR, all while operating at equivalent transmission signal power levels. As an emerging technology, quantum LiDAR is currently in its exploratory phase, and several challenges must be confronted prior to its practical implementation. These challenges encompass a restricted array of methods for the effective generation of quantum light sources, the vulnerability of quantum states to environmental factors, resulting in their deterioration, the constrained techniques for modulating quantum light sources, and the critical necessity to augment detector sensitivity. Furthermore, present quantum LiDAR efforts primarily concentrate on imaging and ranging capabilities, with limited research dedicated to simultaneous velocity measurement and ranging. Hence, forthcoming investigations into quantum LiDAR will center around optimizing quantum light source efficiency, exploring high-dimensional modulation techniques, and advancing high-sensitivity detectors. These efforts aim to enhance system stability and enable miniaturization, ultimately leading to superior target detection performance. This review centers on the evaluation of ranging and velocity measurement performance within quantum LiDAR systems. Following a concise introduction to two renowned categories of classical LiDAR—namely, pulse LiDAR and FMCW LiDAR, the paper delves into the progress made in quantum pulsed LiDAR and quantum interferometric LiDAR. In particular, this review highlights the advancements in quantum FMCW LiDAR, a system proposed for achieving simultaneous range and velocity measurements with quantum enhancement. By conducting a thorough assessment of the current accomplishments in quantum LiDAR research, the study seeks to attain a more profound comprehension of prevailing research focal points and obstacles, thus offering invaluable insights to steer its prospective advancement.
Quantum mechanics cements the intimate relationship between the nature of light and its detection. Historically, quantum theories of photodetection have generally fallen into two categories: the first tries to determine what quantum field observable is measured when photoelectrons are detected, laying the theoretical groundwork for photodetection being possible. The second type are phenomenological theories, which take great care to model the details of specific photodetectors. In this dissertation, we fill in the gap between these two models in the modern literature on photodetection by constructing a fully quantum-mechanical and sufficiently realistic model that includes all stages of the photodetection process. We accomplish this within the framework of quantum information theory using the language of positive operator valued measures (POVMs). \n\nA POVM provides the most general description of a quantum measurement. In the context of single-photon detection, the photodetector POVM provides a complete characterization of the single-photon detector (SPD) from which all figures of merit can be calculated. Each element of the POVM is comprised of a weighted sum over single-photon state projectors. To construct SPD POVMs, we identify the states projected onto by a measurement and the associated weights. We first accomplish this for a simple time-dependent system, laying out how to efficiently project onto arbitrary single-photon states. Then, we describe the three stages of a realistic SPD: transmission, amplification, and measurement.\n\nIn the transmission stage of photodetection a photon enters a network of discrete energy levels, its energy propagating through that network and finally exiting into another output continuum of modes, a process entirely described by a single complex function. In the amplification stage of photodetection, a single excitation is amplified into a macroscopic signal via a nonlinear amplification mechanism. In the final stage, an inefficient ``classical'' measurement is made on the macroscopic signal. By combining these three stages we form a chain of inference from the final ``click'' to the input photon and construct a POVM projecting onto the input Hilbert space. Lastly, we discuss limits and tradeoffs that arise at each stage and implications for photodetection applications.\n\nThis dissertation contains previously published and unpublished material.
Measurements on states of light underpins the entire fields of classical and quantum optics. Without measurement we are unable to gain any information about the light we are studying or about the processes it has undergone. The property of the density matrix of light prior to measurement that we want to measure also relies heavily on the measurement technique we employ. We can use a single-photon detector to measure the particle nature of light--the photon--the discrete quanta of the electromagnetic field. We can conversely measure the wave nature of the light field by making phase-sensitive measurements. In this thesis, we shall explore some advanced implementations and applications of these measurement schemes. First, we shall focus on a specific type of single-photon detector: the Superconducting-Nanowire Single-Photon Detector. We will first consider the integration of these detectors on optical waveguides, and discuss their optical characterisation. Then we will consider a practical application of these detectors by investigating a method to perform broadband spectroscopy with a single detector. We shall then progress to phase-sensitive measurements, and consider the intermediate regime between measuring the wave-like and particle-like nature of light. First we will perform a fundamental investigation of the transition between both measurement regimes. We will see how varying the phase reference itself allows us to tune between both regimes. Following this we will discuss an application of this intermediate regime, by considering an experimental setup to perform state tomography with a weak phase reference. The final consideration of this thesis will be a theoretical benchmarking scheme for a practical application of quantum optics. The manipulation of certain quantum states of light followed by a photon-number measurement can have practical applications in a variety of fields, and therefore validating the results is of extreme importance. On this final topic, we will discuss an experimentally friendly technique to benchmark the output of such measurements by considering smaller subsystems, and the practical requirements of this technique.