Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A Fifth-Coordinate Phase Interferometer: Atom-Optical Readout of Extra-Coordinate Displacement with Computed Resolution

William Alexander Aldred

Published Nov 11, 2026• 1 citation
Publisher

Abstract

An interferometer whose arms are arranged to cancel ordinary displacement can retain sensitivity to displacement along a compact fifth coordinate, which appears as a residual phase that common-mode rejection does not remove. This paper specifies such an instrument on the platform of a Raman atom interferometer, with a stated extra-coordinate coupling of five per cent of the optical wavevector product. Quantum projection noise and technical phase noise together give a computed extra-coordinate resolution of 3.75e-09 metres per root hertz; the unambiguous range before phase wrapping is 7.80e-06 metres of extra-coordinate displacement; and integration to a resolution of 1e-11 metres requires 39.1 hours at the stated cycle rate. The design includes the vibration-isolation, wavefront, and rotation-compensation provisions needed to keep the ordinary-displacement channel below the residual channel. SIMULATED, NOT MEASURED: the performance figures are computed from stated assumptions and no apparatus has been operated.

DOI
10.5281/zenodo.24129537

Related papers

Design Blueprint: A Fifth-Coordinate Phase Interferometer: Atom-Optical Readout of Extra-Coordinate Displacement with Computed Resolution

William Alexander Aldred

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24129538): An interferometer whose arms are arranged to cancel ordinary displacement can retain sensitivity to displacement along a compact fifth coordinate, which appears as a residual phase that common-mode rejection does not remove. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

•Nov 11, 2026•0 citations

A modified Michelson interferometer type Raman laser system for atom interferometers

Ningfang Song, Xiangxiang Lu, Wei Li +5 more

We have developed a modified Michelson interferometer type Raman laser system to manipulate cold 87 Rb atoms to interfere. A frequency modulated continuous wave technique was introduced to determine the optical path difference, thus compensating it to zero to minimize the effects of common mode noise. The linewidth (full width at half maximum) of the beat signal at 6.834 GHz was measured to 1Hz limited by the resolution bandwidth of the spectral analyzer. The measured rms phase variance of the phase noise at 166 MHz was 0.015 rad2, mainly restricted by our poor performance radio frequency microwave source. With modest improvements, we plan to apply this laser system to form an atom interferometer for acceleration and rotation measurements.

arXiv:1407.4013•Jul 15, 2014•0 citations

Hybrid quantum sensing using an optomechanical resonator coupled atom interferometer

Ashwin Rajagopalan

Quantum sensing using atom interferometry possesses immense potential for application in gravimetry, inertial navigation and for gravitational wave detection, apart from carrying out tests of fundamental physics. Atom interferometry can be used to perform absolute inertial measurements with unprecedented long term stability, unlike classical sensors which are prone to drift and incur calibration errors. However, atom interferometers seldom achieve their fundamental sensitivity due to the coupling of ambient vibrations. It is the dominant noise source that not only impairs performance but also affects its operability. Ideal compensation of the effects due to vibration noise using a versatile accelerometer, while concurrently enabling miniaturized atom interferometer setups has not been pioneered. Such a compact hybrid quantum sensor will enable reliable operation with an enhanced performance in field applications, paving the way for robust atom interferometry beyond laboratory conditions. A novel optomechanical resonator has been designed, developed and successfully hybridized with an atom interferometer to suppress the effects of vibration noise, and the results are presented in this thesis. The optomechanical resonator’s inertial test mass is simultaneously used to create a continuous intracavity optical lattice to sense its displacement, and a pulsed optical lattice to manipulate the atoms. For the first time, a broadband accelerometer is seamlessly hybridized with an atom interferometer via mechanical resonator mediated coupling of the optical lattices to measure acceleration. This enables elimination of vibration induced measurement ambiguity in our atom interferometer with a well defined mechanical transfer function. Vibration noise correlation is demonstrated up to our prototype atom interferometer’s most sensitive operating mode of T = 6 ms using double Bragg diffraction, ultimately limited by its technical noise. The optomechanical resonator measures acceleration with a sensitivity down to 1.1×10−6 ms−2/ √Hz corresponding to a displacement sensitivity of 8.6 × 10−15 m/ √Hz. Substantial 1/f noise suppression due to the developed optical readout scheme enables a measurement bandwidth spanning from sub-hertz frequencies up to several kilohertz. Multiple versions of the optomechanical resonator with different characteristics were developed and hybridized with our atom interferometer. This paves the way for developing tailored optomechanical resonators for specific inertial sensing applications.

•Jan 1, 2026•0 citations

Phase stabilization of laser beams in a cold atom accelerometer

Nicole Byrne

A cold atom accelerometer measures the displacement of a proof mass of laser cooled atoms with respect to an instrument reference frame. The cold atom interferometer's reference frame is defined by a pair of specially prepared, counter-propagating laser beams, that measure inertially induced atom displacements with nm scale resolution. This corresponds to acceleration sensitivities comparable to state of the art electro-mechanical accelerometers. In dynamic environments, sensitivity is limited by the stability of the relative laser phase of the two interrogation laser beams, which is adversely affected by vibrations and temperature fluctuations of the interrogation beam optics. Without an independent measurement, the cold atom interferometer cannot distinguish platform acceleration from laser phase fluctuations, which thus are a potentially serious source of error. In this thesis, a Michelson optical interferometer and an optical feedback loop were used to stabilize the relative phase of the interrogation laser beams in a cold atom accelerometer. A digital controller stabilized the relative phase via an electro-optic phase modulator. This control loop's bandwidth encompasses 98.8% of the noise power as determined from the power spectral density of the open loop 795nm Michelson signal. Increasing the controller bandwidth would gain the system marginal improvement in noise reduction. At an atom interferometer dwell time of 1 msec, active laser phase stabilization improved the atom interferometer sensitivity; at an atom interferometer dwell time of 8msec, an improvement was no longer evident. Improvements to the laser phase stabilization system are proposed to increase atom interferometer stability at longer dwell times.

•Jan 1, 2014•0 citations

Optomechanical inertial reference for atom interferometry

A. Rajagopalan, K. Stolzenberg, D. Thomas +5 more

Atom interferometers are among the most sensitive inertial sensors, yet deployment outside the laboratory is limited by vibration noise, conventionally mitigated by external sensors or bulky isolation. Here we demonstrate a hybrid inertial sensor which fuses an optomechanical resonator and an atom interferometer by exploiting the resonator's test mass as the interferometer's reference mirror. This allows for better correlation than with two separate sensors, whose unknown transfer function is replaced by the static response of one mechanical element. The resonator achieves a displacement sensitivity of $8.6\cdot 10^{-15}$ m/$\sqrt{\mathrm{Hz}}$ with suppressed 1/f noise and yields a minimum acceleration sensitivity of $1.1\cdot10^{-6}$ m/s$^2$/$\sqrt{\mathrm{Hz}}$ over a bandwidth extending from sub-Hertz to 2.5 kHz. Under ambient laboratory conditions the integrated system removes vibration-induced phase ambiguity for accelerations up to $50\cdot 10^{-3}$ m/s$^2$ and reaches the interferometer's technical noise limit, which a commercial force-balance accelerometer does not. Because the resonance-tracking readout is largely independent of the mechanical design, the architecture transfers directly to other precision sensing platforms.

quant-pharXiv:2608.28418•Aug 31, 2026

Phase locking an atom interferometer

Andréa D Bertoldi, Ralf Kohlhaas, Etienne Cantin +3 more

In atom interferometry the phase evolution of a quantum superposition state is measured with respect to a reference signal. The measurement has a limited unambiguous interval, since not the phase but its projection is measured as a population unbalance on two energetic levels. Resolving phase wrapping brings to a longer interrogation interval and hence instrument sensitivity. We extended the unambiguous probe interval using coherence preserving measurements and phase corrections, and demonstrated the phase lock of the clock oscillator to an atomic superposition state. On this basis we implemented a protocol to improve atomic clocks limited by local oscillator noise, which is the case of optical atomic clocks, nowadays the best frequency standard in terms of both accuracy and precision. The technique could be adopted to enhance the sensitivity of atomic gravimeters.

European Frequency and Time Forum•Apr 1, 2016•0 citations
An interferometer whose arms are arranged to cancel ordinary displacement can retain sensitivity to displacement along a compact fifth coordinate, which appears as a residual phase that common-mode rejection does not remove. This paper specifies such an instrument on the platform of a Raman atom interferometer, with a stated extra-coordinate coupling of five per cent of the optical wavevector product. Quantum projection noise and technical phase noise together give a computed extra-coordinate resolution of 3.75e-09 metres per root hertz; the unambiguous range before phase wrapping is 7.80e-06 metres of extra-coordinate displacement; and integration to a resolution of 1e-11 metres requires 39.1 hours at the stated cycle rate. The design includes the vibration-isolation, wavefront, and rotation-compensation provisions needed to keep the ordinary-displacement channel below the residual channel. SIMULATED, NOT MEASURED: the performance figures are computed from stated assumptions and no apparatus has been operated.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24129538): An interferometer whose arms are arranged to cancel ordinary displacement can retain sensitivity to displacement along a compact fifth coordinate, which appears as a residual phase that common-mode rejection does not remove. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
We have developed a modified Michelson interferometer type Raman laser system to manipulate cold 87 Rb atoms to interfere. A frequency modulated continuous wave technique was introduced to determine the optical path difference, thus compensating it to zero to minimize the effects of common mode noise. The linewidth (full width at half maximum) of the beat signal at 6.834 GHz was measured to 1Hz limited by the resolution bandwidth of the spectral analyzer. The measured rms phase variance of the phase noise at 166 MHz was 0.015 rad2, mainly restricted by our poor performance radio frequency microwave source. With modest improvements, we plan to apply this laser system to form an atom interferometer for acceleration and rotation measurements.
Quantum sensing using atom interferometry possesses immense potential for application in gravimetry, inertial navigation and for gravitational wave detection, apart from carrying out tests of fundamental physics. Atom interferometry can be used to perform absolute inertial measurements with unprecedented long term stability, unlike classical sensors which are prone to drift and incur calibration errors. However, atom interferometers seldom achieve their fundamental sensitivity due to the coupling of ambient vibrations. It is the dominant noise source that not only impairs performance but also affects its operability. Ideal compensation of the effects due to vibration noise using a versatile accelerometer, while concurrently enabling miniaturized atom interferometer setups has not been pioneered. Such a compact hybrid quantum sensor will enable reliable operation with an enhanced performance in field applications, paving the way for robust atom interferometry beyond laboratory conditions. A novel optomechanical resonator has been designed, developed and successfully hybridized with an atom interferometer to suppress the effects of vibration noise, and the results are presented in this thesis. The optomechanical resonator’s inertial test mass is simultaneously used to create a continuous intracavity optical lattice to sense its displacement, and a pulsed optical lattice to manipulate the atoms. For the first time, a broadband accelerometer is seamlessly hybridized with an atom interferometer via mechanical resonator mediated coupling of the optical lattices to measure acceleration. This enables elimination of vibration induced measurement ambiguity in our atom interferometer with a well defined mechanical transfer function. Vibration noise correlation is demonstrated up to our prototype atom interferometer’s most sensitive operating mode of T = 6 ms using double Bragg diffraction, ultimately limited by its technical noise. The optomechanical resonator measures acceleration with a sensitivity down to 1.1×10−6 ms−2/ √Hz corresponding to a displacement sensitivity of 8.6 × 10−15 m/ √Hz. Substantial 1/f noise suppression due to the developed optical readout scheme enables a measurement bandwidth spanning from sub-hertz frequencies up to several kilohertz. Multiple versions of the optomechanical resonator with different characteristics were developed and hybridized with our atom interferometer. This paves the way for developing tailored optomechanical resonators for specific inertial sensing applications.
A cold atom accelerometer measures the displacement of a proof mass of laser cooled atoms with respect to an instrument reference frame. The cold atom interferometer's reference frame is defined by a pair of specially prepared, counter-propagating laser beams, that measure inertially induced atom displacements with nm scale resolution. This corresponds to acceleration sensitivities comparable to state of the art electro-mechanical accelerometers. In dynamic environments, sensitivity is limited by the stability of the relative laser phase of the two interrogation laser beams, which is adversely affected by vibrations and temperature fluctuations of the interrogation beam optics. Without an independent measurement, the cold atom interferometer cannot distinguish platform acceleration from laser phase fluctuations, which thus are a potentially serious source of error. In this thesis, a Michelson optical interferometer and an optical feedback loop were used to stabilize the relative phase of the interrogation laser beams in a cold atom accelerometer. A digital controller stabilized the relative phase via an electro-optic phase modulator. This control loop's bandwidth encompasses 98.8% of the noise power as determined from the power spectral density of the open loop 795nm Michelson signal. Increasing the controller bandwidth would gain the system marginal improvement in noise reduction. At an atom interferometer dwell time of 1 msec, active laser phase stabilization improved the atom interferometer sensitivity; at an atom interferometer dwell time of 8msec, an improvement was no longer evident. Improvements to the laser phase stabilization system are proposed to increase atom interferometer stability at longer dwell times.
Atom interferometers are among the most sensitive inertial sensors, yet deployment outside the laboratory is limited by vibration noise, conventionally mitigated by external sensors or bulky isolation. Here we demonstrate a hybrid inertial sensor which fuses an optomechanical resonator and an atom interferometer by exploiting the resonator's test mass as the interferometer's reference mirror. This allows for better correlation than with two separate sensors, whose unknown transfer function is replaced by the static response of one mechanical element. The resonator achieves a displacement sensitivity of 8.6⋅10−158.6\cdot 10^{-15}8.6⋅10−15 m/Hz\sqrt{\mathrm{Hz}}Hz​ with suppressed 1/f noise and yields a minimum acceleration sensitivity of 1.1⋅10−61.1\cdot10^{-6}1.1⋅10−6 m/s2^22/Hz\sqrt{\mathrm{Hz}}Hz​ over a bandwidth extending from sub-Hertz to 2.5 kHz. Under ambient laboratory conditions the integrated system removes vibration-induced phase ambiguity for accelerations up to 50⋅10−350\cdot 10^{-3}50⋅10−3 m/s2^22 and reaches the interferometer's technical noise limit, which a commercial force-balance accelerometer does not. Because the resonance-tracking readout is largely independent of the mechanical design, the architecture transfers directly to other precision sensing platforms.
In atom interferometry the phase evolution of a quantum superposition state is measured with respect to a reference signal. The measurement has a limited unambiguous interval, since not the phase but its projection is measured as a population unbalance on two energetic levels. Resolving phase wrapping brings to a longer interrogation interval and hence instrument sensitivity. We extended the unambiguous probe interval using coherence preserving measurements and phase corrections, and demonstrated the phase lock of the clock oscillator to an atomic superposition state. On this basis we implemented a protocol to improve atomic clocks limited by local oscillator noise, which is the case of optical atomic clocks, nowadays the best frequency standard in terms of both accuracy and precision. The technique could be adopted to enhance the sensitivity of atomic gravimeters.