Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A Cavity-Magnon Transducer Linking Microwave and Optical Carriers

William Alexander Aldred

Published Nov 11, 2026• 1 citation
Publisher

Abstract

Quantum networks face a carrier mismatch: processing happens at microwave frequencies in superconducting circuits, while transmission happens at optical frequencies in fibre. A transducer that converts between the two coherently is the missing component. This paper designs one around the magnon mode of a ferrimagnetic sphere coupled to both a microwave cavity and an optical cavity, and computes its conversion performance. The microwave cooperativity is 250 and the optical cooperativity 180, giving a computed internal conversion efficiency whose external value is 77.5 percent. Efficiencies of this class make the transducer usable for heralded state transfer, where low efficiency costs rate rather than fidelity. The device is a design study; nothing has been fabricated or measured.

DOI
10.5281/zenodo.24138350

Related papers

Design Blueprint: A Cavity-Magnon Transducer Linking Microwave and Optical Carriers

William Alexander Aldred

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24138351): Quantum networks face a carrier mismatch: processing happens at microwave frequencies in superconducting circuits, while transmission happens at optical frequencies in fibre. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

•Nov 11, 2026•0 citations

Toward Scalable Heterogeneous Quantum Networks: Microwave-Optical Transduction Across Platforms

Tarvir Anjum Aditto, Jaiyan Sadid Ifty, Khondokar Zahin

The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically $10^{-10}$ to $10^{-8})$, but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to $10^{-4}$. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.

quant-pharXiv:2605.26976•May 27, 2026•1 citation

Fast and efficient transducers for microwave-optical quantum communication

G. A. Peairs

A quantum network consisting of computational nodes connected by high-fidelity communication channels could expand information-processing capabilities beyond those of classical networks. Superconducting qubits hold promise for scalable quantum computation at microwave frequencies, but must operate in an isolated cryogenic environment; meanwhile, quantum communication over long distances has been demonstrated with optical photons. A fast, quantum-coherent interface between the two would be a key element of a large-scale quantum network or distributed quantum computer.In this thesis, we describe the theoretical basis as well as the practical design and development of a device incorporating a silicon optomechanical nanobeam and an aluminum-nitride-based electromechanical transducer. We find that this class of device has the potential to approach ideal quantum microwave-optical transduction. Finally, we experimentally demonstrate classical, continuous-wave operation of such a device with internal conversion efficiencies above 1%. This device also has a larger bandwidth than previous efficient microwave-optical transducers, allowing us to operate in the time domain with 20 ns pulses.

•Jan 1, 2019•0 citations

Microwave-to-optical transduction using magnon-exciton coupling in a layered antiferromagnet

Pratap Chandra Adak, Iris McDaniel, Suvodeep Paul +12 more

Coherent interfaces between microwave-frequency quantum systems and low-loss optical links are essential for quantum networks. However, existing microwave-optical transducers often trade conversion efficiency against added noise, bandwidth, and device integrability. Here, we demonstrate coherent microwave-to-optical transduction based on magnon-exciton coupling in the layered antiferromagnet CrSBr. Driving the antiferromagnetic resonance with microwave signals imprints coherent modulation on a reflected optical probe, generating optical sidebands that are resonantly enhanced near excitonic transitions. While prior magnon-based approaches to microwave-to-optical transduction have typically relied on intrinsically weak off-resonant magneto-optical effects (e.g., Faraday rotation), our scheme exploits strong light-matter interactions at exciton resonances. Even in a bulk crystal without cavity enhancement, we observe coherent conversion over an intrinsically broadband window of ~ 300 MHz. We further show that multiple exciton-polariton resonances inherit the magnon-coupled response, suggesting a route to broaden the usable optical detuning range and to mitigate optical dissipation. Our results establish magnon-coupled excitons in layered magnets as a scalable platform for broadband microwave-optical interfaces, with pathways to higher cooperativity via reduced magnetic volume and cavity integration.

cond-mat.mtrl-sciCross-listedarXiv:2604.03441•Apr 7, 2026

Integrated and tunable microwave-to-optical transduction via magno-optomechanics

J. Q Liu, Zhi-Gang Hu, Yu-Xiang Zhang +1 more

Microwave-to-optical transducers facilitate the distributed quantum network by combining the high-speed information-processing abilities of superconducting circuits with the long-distance, low-loss transmitting capabilities of optical photons. Besides core metrics such as high efficiency, low noise, and wide bandwidth, practical and scalable transducers also demand a compact footprint and frequency tunability. In this work, we propose an integrated and tunable transducer that combines a coplanar waveguide microwave resonator with a magno-optomechanical microcavity via flip-chip bonding. Benefiting from the broad frequency tunability of the magnon mode, the working frequency range can be tuned over several gigahertz. Through optimization of the geometry and pump powers, our design achieves a theoretical microwave-to-optical photon conversion efficiency exceeding 50% using experimentally achievable parameters, alongside a bandwidth greater than 10 kHz. An added noise near the quantum limit $(\ensuremath{\sim}1)$ is achievable at 10 mK using lower pump powers at the cost of conversion efficiency or a pulsed-pump protocol. By merging compact integration with wide frequency tunability, this platform offers a promising pathway toward scalable quantum networks.

Physical Review A•Aug 18, 2025•6 citations

Microwave‐to‐Optics Conversion Using Magnetostatic Modes and a Tunable Optical Cavity

Wei‐Jiang Wu, Yi‐Pu Wang, Jie Li +2 more

Abstract Quantum computing, quantum communication, and quantum networks rely on hybrid quantum systems operating in different frequency ranges. For instance, the superconducting qubits work in the gigahertz range, while the optical photons used in communication are in the range of hundreds of terahertz. Due to the large frequency mismatch, achieving the direct coupling and information exchange between different information carriers is generally difficult. Accordingly, a quantum interface is demanded, which serves as a bridge to establish information linkage between different quantum systems operating at distinct frequencies. Recently, the magnon mode in ferromagnetic spin systems has received significant attention. While the inherent weak optomagnonic coupling strength restricts the microwave‐to‐optical photon conversion efficiency using magnons, the versatility of the magnon modes, together with their readily achievable strong coupling with other quantum systems, endow them with many distinct advantages. Here, the magnon‐based microwave‐light interface is realized by adopting an optical cavity with adjustable free spectrum range and different kinds of magnetostatic modes in two microwave cavity configurations. By optimizing the parameters, a conversion efficiency of with bandwidth of 24 MHz is achieved. The impact of various parameters on the microwave‐to‐optics conversion is analyzed. The study provides useful guidance and insights to further enhancing the microwave‐to‐optics conversion efficiency using magnons.

arXiv:2403.00345•Laser & Photonics Review•Sep 3, 2024•21 citations
Quantum networks face a carrier mismatch: processing happens at microwave frequencies in superconducting circuits, while transmission happens at optical frequencies in fibre. A transducer that converts between the two coherently is the missing component. This paper designs one around the magnon mode of a ferrimagnetic sphere coupled to both a microwave cavity and an optical cavity, and computes its conversion performance. The microwave cooperativity is 250 and the optical cooperativity 180, giving a computed internal conversion efficiency whose external value is 77.5 percent. Efficiencies of this class make the transducer usable for heralded state transfer, where low efficiency costs rate rather than fidelity. The device is a design study; nothing has been fabricated or measured.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24138351): Quantum networks face a carrier mismatch: processing happens at microwave frequencies in superconducting circuits, while transmission happens at optical frequencies in fibre. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically 10−1010^{-10}10−10 to 10−8)10^{-8})10−8), but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to 10−410^{-4}10−4. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.
A quantum network consisting of computational nodes connected by high-fidelity communication channels could expand information-processing capabilities beyond those of classical networks. Superconducting qubits hold promise for scalable quantum computation at microwave frequencies, but must operate in an isolated cryogenic environment; meanwhile, quantum communication over long distances has been demonstrated with optical photons. A fast, quantum-coherent interface between the two would be a key element of a large-scale quantum network or distributed quantum computer.In this thesis, we describe the theoretical basis as well as the practical design and development of a device incorporating a silicon optomechanical nanobeam and an aluminum-nitride-based electromechanical transducer. We find that this class of device has the potential to approach ideal quantum microwave-optical transduction. Finally, we experimentally demonstrate classical, continuous-wave operation of such a device with internal conversion efficiencies above 1%. This device also has a larger bandwidth than previous efficient microwave-optical transducers, allowing us to operate in the time domain with 20 ns pulses.
Coherent interfaces between microwave-frequency quantum systems and low-loss optical links are essential for quantum networks. However, existing microwave-optical transducers often trade conversion efficiency against added noise, bandwidth, and device integrability. Here, we demonstrate coherent microwave-to-optical transduction based on magnon-exciton coupling in the layered antiferromagnet CrSBr. Driving the antiferromagnetic resonance with microwave signals imprints coherent modulation on a reflected optical probe, generating optical sidebands that are resonantly enhanced near excitonic transitions. While prior magnon-based approaches to microwave-to-optical transduction have typically relied on intrinsically weak off-resonant magneto-optical effects (e.g., Faraday rotation), our scheme exploits strong light-matter interactions at exciton resonances. Even in a bulk crystal without cavity enhancement, we observe coherent conversion over an intrinsically broadband window of ~ 300 MHz. We further show that multiple exciton-polariton resonances inherit the magnon-coupled response, suggesting a route to broaden the usable optical detuning range and to mitigate optical dissipation. Our results establish magnon-coupled excitons in layered magnets as a scalable platform for broadband microwave-optical interfaces, with pathways to higher cooperativity via reduced magnetic volume and cavity integration.
Microwave-to-optical transducers facilitate the distributed quantum network by combining the high-speed information-processing abilities of superconducting circuits with the long-distance, low-loss transmitting capabilities of optical photons. Besides core metrics such as high efficiency, low noise, and wide bandwidth, practical and scalable transducers also demand a compact footprint and frequency tunability. In this work, we propose an integrated and tunable transducer that combines a coplanar waveguide microwave resonator with a magno-optomechanical microcavity via flip-chip bonding. Benefiting from the broad frequency tunability of the magnon mode, the working frequency range can be tuned over several gigahertz. Through optimization of the geometry and pump powers, our design achieves a theoretical microwave-to-optical photon conversion efficiency exceeding 50% using experimentally achievable parameters, alongside a bandwidth greater than 10 kHz. An added noise near the quantum limit $(\ensuremath{\sim}1)$ is achievable at 10 mK using lower pump powers at the cost of conversion efficiency or a pulsed-pump protocol. By merging compact integration with wide frequency tunability, this platform offers a promising pathway toward scalable quantum networks.
Abstract Quantum computing, quantum communication, and quantum networks rely on hybrid quantum systems operating in different frequency ranges. For instance, the superconducting qubits work in the gigahertz range, while the optical photons used in communication are in the range of hundreds of terahertz. Due to the large frequency mismatch, achieving the direct coupling and information exchange between different information carriers is generally difficult. Accordingly, a quantum interface is demanded, which serves as a bridge to establish information linkage between different quantum systems operating at distinct frequencies. Recently, the magnon mode in ferromagnetic spin systems has received significant attention. While the inherent weak optomagnonic coupling strength restricts the microwave‐to‐optical photon conversion efficiency using magnons, the versatility of the magnon modes, together with their readily achievable strong coupling with other quantum systems, endow them with many distinct advantages. Here, the magnon‐based microwave‐light interface is realized by adopting an optical cavity with adjustable free spectrum range and different kinds of magnetostatic modes in two microwave cavity configurations. By optimizing the parameters, a conversion efficiency of with bandwidth of 24 MHz is achieved. The impact of various parameters on the microwave‐to‐optics conversion is analyzed. The study provides useful guidance and insights to further enhancing the microwave‐to‐optics conversion efficiency using magnons.