Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Fast and efficient transducers for microwave-optical quantum communication

G. A. Peairs

Published Jan 1, 2019• 0 citations
OpenAlex

Abstract

A quantum network consisting of computational nodes connected by high-fidelity communication channels could expand information-processing capabilities beyond those of classical networks. Superconducting qubits hold promise for scalable quantum computation at microwave frequencies, but must operate in an isolated cryogenic environment; meanwhile, quantum communication over long distances has been demonstrated with optical photons. A fast, quantum-coherent interface between the two would be a key element of a large-scale quantum network or distributed quantum computer.In this thesis, we describe the theoretical basis as well as the practical design and development of a device incorporating a silicon optomechanical nanobeam and an aluminum-nitride-based electromechanical transducer. We find that this class of device has the potential to approach ideal quantum microwave-optical transduction. Finally, we experimentally demonstrate classical, continuous-wave operation of such a device with internal conversion efficiencies above 1%. This device also has a larger bandwidth than previous efficient microwave-optical transducers, allowing us to operate in the time domain with 20 ns pulses.

Related papers

Hybrid integrated photonics for coherent microwave-optical transduction

Terence Blésin

Superconducting circuits are important technological tools that have found various applications, notably hypothetical future superconducting quantum computers. Scaling such systems further is, however, proving challenging because of thermal heat load and space constraints in cryostats. One way of improving the scalability of such systems would be to resort to optical fibers for controlling the circuits in cryostats, as well as mediating long-distance interaction between them while preserving quantum coherence. Such a strategy relies on building a coherent interface between GHz frequencies and optical frequencies. This interface, referred to as "microwave-optical transducer", would need to exhibit high photon conversion efficiencies and very low added noise, ideally less than a quantum, in a cryogenic environment. Since the prospects of weaving networks of optically connected superconducting quantum processors have now attracted the attention of the scientific community for more than a decade, very efficient transducers have already been proposed and realized. However, despite their impressive performances against selected metrics, often equivalent to optimizing the on-chip conversion efficiency alone, none of the approaches pursued so far really solved the qubit interconnection problems in ways that could be applied to large-scale systems in the near future. The aim of this thesis was to develop transduction approaches that would ultimately enable optical driving of superconducting circuits and quantum state transfer between microwave and optical frequencies, while at the same time ensuring good scalability, both in terms of wafer manufacturability and integration in cryogenic environments. Integrated photonic circuits based on silicon nitride appeared as a promising platform, as silicon nitride is a CMOS-certified material, has a transparency window compatible with optical fibers and lacks two photon absorption. Realizing the coupling between microwave and optical frequencies in a way similar to what is done in optomechanics is desirable, because the field of optomechanics has seen the establishement of techniques that enable control of the low frequency degree of freedom at the quantum mechanical level, including ground state cooling, control of the susceptibility by dynamical backaction, quantum state transfer and entanglement. The heterogeneous integration of nonlinear crystalline thin films, such as lithium niobate and lithium tantalate, onto silicon nitride photonic circuitry endows it with an electro-optic activity that emulates the optomechanical interaction, while offering an inherent access to the microwave degree of freedom. However, material nonlinearities, including photorefraction, charge screening, and hysteresis, introduce complications that motivate exploring alternative approaches. Here, alongside an electro-optic implementation, a transducer that leverages the interaction of bulk acoustic resonances excited by micro-electromechanical systems with whispering-gallery-like modes of microresonators is presented. Coherent transduction between microwave and optical fields is demonstrated, and optomechanical dynamical backaction is observed. The transducers fast bandwidth, compatibility with multiplexing and ability to down-convert microwaves suggest interesting prospects, particularly upon further improvements of the optomechanical coupling.

•Jan 1, 2026•0 citations

Toward Scalable Heterogeneous Quantum Networks: Microwave-Optical Transduction Across Platforms

Tarvir Anjum Aditto, Jaiyan Sadid Ifty, Khondokar Zahin

The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically $10^{-10}$ to $10^{-8})$, but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to $10^{-4}$. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.

quant-pharXiv:2605.26976•May 27, 2026•1 citation

Optomechanical Microwave-to-Optical Photon Transducer Chips: Empowering the Quantum Internet Revolution

Xinyao Xu, Yifei Zhang, Jindao Tang +9 more

The first quantum revolution has brought us the classical Internet and information technology. Today, as technology advances rapidly, the second quantum revolution quietly arrives, with a crucial moment for quantum technology to establish large-scale quantum networks. However, solid-state quantum bits (such as superconducting and semiconductor qubits) typically operate in the microwave frequency range, making it challenging to transmit signals over long distances. Therefore, there is an urgent need to develop quantum transducer chips capable of converting microwaves into optical photons in the communication band, since the thermal noise of optical photons at room temperature is negligible, rendering them an ideal information carrier for large-scale spatial communication. Such devices are important for connecting different physical platforms and efficiently transmitting quantum information. This paper focuses on the fast-developing field of optomechanical quantum transducers, which has flourished over the past decade, yielding numerous advanced achievements. We categorize transducers based on various mechanical resonators and discuss their principles of operation and their achievements. Based on existing research on optomechanical transducers, we compare the parameters of several mechanical resonators and analyze their advantages and limitations, as well as provide prospects for the future development of quantum transducers.

Micromachines•Mar 31, 2024•7 citations

Novel approaches to optomechanical transduction

Ondřej Černotík

Faithful conversion of quantum signals between microwave and optical frequencies is crucial for building quantum networks based on superconducting circuits and for detection of weak microwave signals.A promising route towards this task uses transducers based on mechanical oscillators, which interact with light via radiation pressure and with microwave fields by electrostatic forces.Existing theoretical proposals and experimental efforts focus on two avenues towards optomechanical transduction: time-independent schemes for conversion of propagating fields or state transfer via adiabatic passage.The former approach results in simple experimental setups but its applicability is limited by narrow conversion bandwidth.The latter strategy avoids this problem; nevertheless, this gain requires complex time-dependent control schemes and strong opto-and electromechanical coupling, which is out of reach for current systems.In an ideal optomechanical transducer, we would like to combine the advantages of both strategies, namely large bandwidth and simple, time-independent control.In this dissertation, I tackle this challenge and develop two schemes for quantum networking of superconducting circuits based on two different tactics.In the first case, the transducer is optimized for a specific task: generation of entanglement between two superconducting qubits.I show how two established experimental techniques-parity measurements on superconducting qubits and optomechanical force sensing-can be combined to create a conceptually simple device, in which entanglement between the qubits is generated by measurement and postselection.Second, I demonstrate that an array of optomechanical transducers is capable of converting arbitrary input signals within a large bandwidth.The conversion process is based on adiabatic passage but, unlike existing proposals, uses spatial (and not temporal) variation of the system parameters.This approach does not require strong coupling and significantly reduces added noise.Together, these two protocols pave the way to future quantum networks with superconducting systems.The scheme for entanglement generation can be implemented with current experimental technology and is well suited for proof of principle experiments.Large quantum networks with many nodes will, on the other hand, require transducers capable of reaching high communication rates.This goal can be achieved with the large bandwidth of optoelectromechanical arrays.

Bulletin of the American Physical Society•Jan 1, 2017•1 citation

Bulk Acoustic Quantum Transduction

Maxwell Drimmer

Quantum networks of superconducting circuit quantum processors are an exciting prospect but are unfeasible without an efficient quantum interface between optical light and superconducting qubits. This problem motivates the development of a quantum microwave-to-optical transducer, a device that can faithfully transfer the state of a superconducting circuit to a photonic flying qubit and vice versa. This thesis describes our progress towards building a microwave-to-optical transducer mediated by phonons in a high-overtone bulk acoustic resonator (HBAR). Novel aluminum nitride-on-quartz HBARs are designed, fabricated, and tested. The acoustic loss rates are found to be near the state-of-the-art. Transduction-compatible transmon qubits are designed and tested. These qubits are capable of operating inside an optical cavity as well as achieving electromechanical interactions in the strong-coupling regime. An initial experiment studied how superconducting qubits recover after exposure to infrared light and demonstrated that the transduction-compatible qubits should be able to operate in a transducer with a reasonable duty cycle. The concept of microwave-to-optical transduction using multiple acoustic modes is established, and new simulation methods are developed to rapidly optimize HBARs. These tools are used to create a transduction-compatible qubit-HBAR device operating in the multi-mode strong coupling regime. Separately, a transduction compatible optical cavity was built and used to perform optomechanical measurements of a transduction-compatible HBAR and confirm that this device can reach the high-cooperativity regime. Finally, a measurement for verifying that a transducer is operating as a source of single photons is discussed. This can be accomplished by measuring the optical second-order correlation function of transduced photons. A filter cavity cascade is constructed to perform this measurement without being overwhelmed by optical pump leakage. These results establish bulk acoustic transduction as a promising platform for low-noise quantum microwave-to-optical transduction.

•Jan 1, 2025•0 citations

A two-dimensional piezo-optomechanical transducer

Tian Xie, Nelson Ooi, Linus Woodard +7 more

Optical quantum networks provide a natural route for connecting distant superconducting quantum processors, enabling distributed quantum computation, sensing, and communication. Piezo-optomechanical transducers are among the leading candidates for scalable microwave-to-optical quantum interfaces. However, prior one-dimensional piezo-optomechanical transducers remain limited by optical-absorption-induced heating and the resulting thermal noise. Two-dimensional optomechanical crystals offer substantially improved thermalization from better thermal anchoring, but their structural complexity has so far hindered the realization of a fully integrated two-dimensional transducer. Here, we overcome this challenge with a new design strategy based on band structure engineering. We fabricate the devices and experimentally characterize the response, measuring an electromechanical damping rate of 4.6 kHz at room temperature and electromechanical coupling rate of 0.17 MHz by wire-bonding to a multi-mode microwave resonator at 10 mK. Bidirectional transduction is performed with a calibrated internal efficiency of 0.85\% in the continuous-wave operation, alongside pulsed photon-phonon pair generation near its quantum ground state. Our results represent a significant step toward high-efficiency and low-noise transducers for entangling remote superconducting qubits.

quant-pharXiv:2607.26161•Jul 30, 2026•2 citations
A quantum network consisting of computational nodes connected by high-fidelity communication channels could expand information-processing capabilities beyond those of classical networks. Superconducting qubits hold promise for scalable quantum computation at microwave frequencies, but must operate in an isolated cryogenic environment; meanwhile, quantum communication over long distances has been demonstrated with optical photons. A fast, quantum-coherent interface between the two would be a key element of a large-scale quantum network or distributed quantum computer.In this thesis, we describe the theoretical basis as well as the practical design and development of a device incorporating a silicon optomechanical nanobeam and an aluminum-nitride-based electromechanical transducer. We find that this class of device has the potential to approach ideal quantum microwave-optical transduction. Finally, we experimentally demonstrate classical, continuous-wave operation of such a device with internal conversion efficiencies above 1%. This device also has a larger bandwidth than previous efficient microwave-optical transducers, allowing us to operate in the time domain with 20 ns pulses.
Superconducting circuits are important technological tools that have found various applications, notably hypothetical future superconducting quantum computers. Scaling such systems further is, however, proving challenging because of thermal heat load and space constraints in cryostats. One way of improving the scalability of such systems would be to resort to optical fibers for controlling the circuits in cryostats, as well as mediating long-distance interaction between them while preserving quantum coherence. Such a strategy relies on building a coherent interface between GHz frequencies and optical frequencies. This interface, referred to as "microwave-optical transducer", would need to exhibit high photon conversion efficiencies and very low added noise, ideally less than a quantum, in a cryogenic environment. Since the prospects of weaving networks of optically connected superconducting quantum processors have now attracted the attention of the scientific community for more than a decade, very efficient transducers have already been proposed and realized. However, despite their impressive performances against selected metrics, often equivalent to optimizing the on-chip conversion efficiency alone, none of the approaches pursued so far really solved the qubit interconnection problems in ways that could be applied to large-scale systems in the near future. The aim of this thesis was to develop transduction approaches that would ultimately enable optical driving of superconducting circuits and quantum state transfer between microwave and optical frequencies, while at the same time ensuring good scalability, both in terms of wafer manufacturability and integration in cryogenic environments. Integrated photonic circuits based on silicon nitride appeared as a promising platform, as silicon nitride is a CMOS-certified material, has a transparency window compatible with optical fibers and lacks two photon absorption. Realizing the coupling between microwave and optical frequencies in a way similar to what is done in optomechanics is desirable, because the field of optomechanics has seen the establishement of techniques that enable control of the low frequency degree of freedom at the quantum mechanical level, including ground state cooling, control of the susceptibility by dynamical backaction, quantum state transfer and entanglement. The heterogeneous integration of nonlinear crystalline thin films, such as lithium niobate and lithium tantalate, onto silicon nitride photonic circuitry endows it with an electro-optic activity that emulates the optomechanical interaction, while offering an inherent access to the microwave degree of freedom. However, material nonlinearities, including photorefraction, charge screening, and hysteresis, introduce complications that motivate exploring alternative approaches. Here, alongside an electro-optic implementation, a transducer that leverages the interaction of bulk acoustic resonances excited by micro-electromechanical systems with whispering-gallery-like modes of microresonators is presented. Coherent transduction between microwave and optical fields is demonstrated, and optomechanical dynamical backaction is observed. The transducers fast bandwidth, compatibility with multiplexing and ability to down-convert microwaves suggest interesting prospects, particularly upon further improvements of the optomechanical coupling.
The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically 10−1010^{-10}10−10 to 10−8)10^{-8})10−8), but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to 10−410^{-4}10−4. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.
The first quantum revolution has brought us the classical Internet and information technology. Today, as technology advances rapidly, the second quantum revolution quietly arrives, with a crucial moment for quantum technology to establish large-scale quantum networks. However, solid-state quantum bits (such as superconducting and semiconductor qubits) typically operate in the microwave frequency range, making it challenging to transmit signals over long distances. Therefore, there is an urgent need to develop quantum transducer chips capable of converting microwaves into optical photons in the communication band, since the thermal noise of optical photons at room temperature is negligible, rendering them an ideal information carrier for large-scale spatial communication. Such devices are important for connecting different physical platforms and efficiently transmitting quantum information. This paper focuses on the fast-developing field of optomechanical quantum transducers, which has flourished over the past decade, yielding numerous advanced achievements. We categorize transducers based on various mechanical resonators and discuss their principles of operation and their achievements. Based on existing research on optomechanical transducers, we compare the parameters of several mechanical resonators and analyze their advantages and limitations, as well as provide prospects for the future development of quantum transducers.
Faithful conversion of quantum signals between microwave and optical frequencies is crucial for building quantum networks based on superconducting circuits and for detection of weak microwave signals.A promising route towards this task uses transducers based on mechanical oscillators, which interact with light via radiation pressure and with microwave fields by electrostatic forces.Existing theoretical proposals and experimental efforts focus on two avenues towards optomechanical transduction: time-independent schemes for conversion of propagating fields or state transfer via adiabatic passage.The former approach results in simple experimental setups but its applicability is limited by narrow conversion bandwidth.The latter strategy avoids this problem; nevertheless, this gain requires complex time-dependent control schemes and strong opto-and electromechanical coupling, which is out of reach for current systems.In an ideal optomechanical transducer, we would like to combine the advantages of both strategies, namely large bandwidth and simple, time-independent control.In this dissertation, I tackle this challenge and develop two schemes for quantum networking of superconducting circuits based on two different tactics.In the first case, the transducer is optimized for a specific task: generation of entanglement between two superconducting qubits.I show how two established experimental techniques-parity measurements on superconducting qubits and optomechanical force sensing-can be combined to create a conceptually simple device, in which entanglement between the qubits is generated by measurement and postselection.Second, I demonstrate that an array of optomechanical transducers is capable of converting arbitrary input signals within a large bandwidth.The conversion process is based on adiabatic passage but, unlike existing proposals, uses spatial (and not temporal) variation of the system parameters.This approach does not require strong coupling and significantly reduces added noise.Together, these two protocols pave the way to future quantum networks with superconducting systems.The scheme for entanglement generation can be implemented with current experimental technology and is well suited for proof of principle experiments.Large quantum networks with many nodes will, on the other hand, require transducers capable of reaching high communication rates.This goal can be achieved with the large bandwidth of optoelectromechanical arrays.
Quantum networks of superconducting circuit quantum processors are an exciting prospect but are unfeasible without an efficient quantum interface between optical light and superconducting qubits. This problem motivates the development of a quantum microwave-to-optical transducer, a device that can faithfully transfer the state of a superconducting circuit to a photonic flying qubit and vice versa. This thesis describes our progress towards building a microwave-to-optical transducer mediated by phonons in a high-overtone bulk acoustic resonator (HBAR). Novel aluminum nitride-on-quartz HBARs are designed, fabricated, and tested. The acoustic loss rates are found to be near the state-of-the-art. Transduction-compatible transmon qubits are designed and tested. These qubits are capable of operating inside an optical cavity as well as achieving electromechanical interactions in the strong-coupling regime. An initial experiment studied how superconducting qubits recover after exposure to infrared light and demonstrated that the transduction-compatible qubits should be able to operate in a transducer with a reasonable duty cycle. The concept of microwave-to-optical transduction using multiple acoustic modes is established, and new simulation methods are developed to rapidly optimize HBARs. These tools are used to create a transduction-compatible qubit-HBAR device operating in the multi-mode strong coupling regime. Separately, a transduction compatible optical cavity was built and used to perform optomechanical measurements of a transduction-compatible HBAR and confirm that this device can reach the high-cooperativity regime. Finally, a measurement for verifying that a transducer is operating as a source of single photons is discussed. This can be accomplished by measuring the optical second-order correlation function of transduced photons. A filter cavity cascade is constructed to perform this measurement without being overwhelmed by optical pump leakage. These results establish bulk acoustic transduction as a promising platform for low-noise quantum microwave-to-optical transduction.
Optical quantum networks provide a natural route for connecting distant superconducting quantum processors, enabling distributed quantum computation, sensing, and communication. Piezo-optomechanical transducers are among the leading candidates for scalable microwave-to-optical quantum interfaces. However, prior one-dimensional piezo-optomechanical transducers remain limited by optical-absorption-induced heating and the resulting thermal noise. Two-dimensional optomechanical crystals offer substantially improved thermalization from better thermal anchoring, but their structural complexity has so far hindered the realization of a fully integrated two-dimensional transducer. Here, we overcome this challenge with a new design strategy based on band structure engineering. We fabricate the devices and experimentally characterize the response, measuring an electromechanical damping rate of 4.6 kHz at room temperature and electromechanical coupling rate of 0.17 MHz by wire-bonding to a multi-mode microwave resonator at 10 mK. Bidirectional transduction is performed with a calibrated internal efficiency of 0.85\% in the continuous-wave operation, alongside pulsed photon-phonon pair generation near its quantum ground state. Our results represent a significant step toward high-efficiency and low-noise transducers for entangling remote superconducting qubits.