Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Inter-Site Fluctuation Mechanics and Quasiparticle Generation-Recombination Noise in Kinetic Inductance Detectors (KID)

James Glenn-Anderson

Published Nov 7, 2026• 0 citations
Publisher

Abstract

Kinetic Inductance Detectors (KIDs) represent a cornerstone of modern millimeter-wave, sub-millimeter, and far-infrared astronomical instrumentation, offering unmatched multiplexing capabilities for large-format focal planes in cosmic microwave background (CMB) polarimetry and spectroscopic survey telescopes. Operating at deep cryogenic temperatures () via the modulation of superconducting surface impedance under photon-induced pair breaking [11], KIDs rely on the kinetic inductance effect to translate Cooper-pair density variations into resonant frequency and phase shifts. However, their ultimate sensitivity is frequently limited by excess low-frequency phase and amplitude noise that traditional quasiparticle generation-recombination (G-R) and Two-Level System (TLS) surface defect models fail to fully resolve. In this work, we extend our first-principles inter-site fluctuation mechanics —previously established for Transition-Edge Sensors (TES) and cryogenic field-effect transistors—to the dissipative electrodynamic transport regime of superconducting microresonators. We present a rigorous field-theoretic derivation of the inter-site fluctuation matrix governing amorphous dielectric-superconductor interfaces and grain boundaries in high-Q superconducting microstrip and coplanar waveguide (CPW) geometries. By decoupling classical thermal activation from quantum zero-point phase dispersion, we formulate a unified stochastic master equation that couples quantum inter-site tunneling, superconductive order-parameter phase dynamics, and non-equilibrium quasiparticle generation-recombination kinetics. We derive the exact non-stationary relaxation time distribution and the resulting resonant frequency noise spectral density, and integrate this framework into a modified Mattis-Bardeen surface impedance and phase readout formulation. Finally, we outline a high-performance MATLAB simulation architecture designed to validate the tripartite noise hierarchy across cryogenic operational regimes, providing instrument designers with an uncompromising theoretical foundation for next-generation focal-plane optimization.

DOI
10.5281/zenodo.24040049

Related papers

Inter-Site Fluctuation Mechanics and the Tripartite Noise Hierarchy in Transition-Edge Sensors (TES)

James Glenn-Anderson

Transition-Edge Sensors (TES) represent the state-of-the-art in ultra-sensitive cryogenic radiation detection for cosmic microwave background (CMB) polarimetry and sub-millimeter astronomy. Operating within deep cryogenic regimes on the razor-sharp edge of a superconducting transition, these devices exhibit excess low-frequency noise spectra that severely constrain instrumental sensitivity below 10 Hz. Conventional bolometric noise models—relying on classical thermal fluctuation noise (TFNN), phenomenological Hooge parameters, or standard Dutta-Horn thermal activation—fail to capture the anomalous spectral upturns and non-stationary behavior observed in disordered superconducting bilayers (e.g., Ti/Au or Mo/Au). In this work, we present a rigorous, first-principles derivation of inter-site fluctuation mechanics tailored exclusively to the dissipative DC transport regime of Transition-Edge Sensors. We dismantle the historical conflation of TES and kinetic inductance detector (KID) noise models, establishing instead a tripartite noise hierarchy governed by: (1) Quantum Fluctuations, which dictate zero-point phase dispersion and barrier tunneling across disordered microstructures when classical Arrhenius activation freezes out; (2) Superconductive Fluctuations, which drive order-parameter phase dynamics, Cooper-pair density modulation, and the mesoscopic "fluctuation of fluctuations" via the dynamical breathing of normal-superconducting domain boundaries; (3) Classical Thermal Fluctuations, recovered strictly as the high-temperature asymptotic limit. By formulating a coupled stochastic master equation and non-Hermitian dissipation kernels, we derive the exact non-stationary relaxation time distribution and inter-site resistance noise spectral density . We then incorporate this framework into a modified electrothermal feedback (ETF) and Noise Equivalent Power (NEP) formulation, providing an uncompromising theoretical foundation for next-generation astrophysical instrumentation.

•Nov 7, 2026•0 citations

Inter-Site 1/f Fluctuation Mechanics in Superconductor-Insulator-Superconductor (SIS) Mixers and Josephson Junction Detectors

James Glenn-Anderson

Superconductor-Insulator-Superconductor (SIS) mixers and Josephson junction detectors operate at millikelvin temperatures and represent the pinnacle of sensitive heterodyne detection for sub-millimeter wave and terahertz radio astronomy, as well as cosmic microwave background (CMB) instrumentation. While photon-assisted quasiparticle tunneling yields quantum-limited conversion gain, the ultimate sensitivity of SIS receivers and superconducting quantum detectors is fundamentally limited by low-frequency flicker noise and current fluctuations arising from trapped vortex motion, sub-gap leakage currents, and barrier interface defects. Conventional BCS-based tunneling models and empirical semiconductor noise formulas fail to capture the non-linear spectral upturns and phase jitter induced by quantum phase slips in disordered barrier junctions. Here, we present a first-principles derivation of inter-site fluctuation mechanics applied specifically to SIS tunnel junctions and Josephson device barriers. By framing quasiparticle trapping and Cooper pair tunneling across the insulating barrier as a stochastic transition network governed by zero-point random network matrix fluctuations, we eliminate phenomenological noise parameters. We derive the exact spectral density governing sub-gap current noise and phase diffusion, incorporate non-Hermitian Lindblad dissipation kernels to model vortex pinning relaxation, and establish closed-form expressions for the input-referred noise temperature in terahertz heterodyne receivers.

•Nov 5, 2026•0 citations

Kinetic inductance detectors for measuring the polarization of the cosmic microwave background

D. Flanigan

Kinetic inductance detectors (KIDs) are superconducting thin-film microresonators that are sensitive photon detectors. These detectors are a candidate for the next generation of experiments designed to measure the polarization of the cosmic microwave background (CMB). I discuss the basic theory needed to understand the response of a KID to light, focusing on the dynamics of the quasiparticle system. I derive an equation that describes the dynamics of the quasiparticle number, solve it in a simplified form not previously published, and show that it can describe the dynamic response of a detector. Magnetic flux vortices in a superconducting thin film can be a significant source of dissipation, and I demonstrate some techniques to prevent their formation. Based on the presented theory, I derive a corrected version of a widely-used equation for the quasiparticle recombination noise in a KID. I show that a KID consisting of a lumped-element resonator can be sensitive enough to be limited by photon noise, which is the fundamental limit for photometry, at a level of optical loading below levels in ground-based CMB experiments. Finally, I describe an ongoing project to develop multichroic KID pixels that are each sensitive to two linear polarization states in two spectral bands, intended for the next generation of CMB experiments. I show that a prototype 23-pixel array can detect millimeter-wave light, and present characterization measurements of the detectors.

•Jan 1, 2018•1 citation

Performance of a KID: On the influence of the resonator geometry on the noise and Q-factor of a kinetic inductance detector

Kee Scholten

Space-based astronomy is in need of a photon-noise limited detector with multiplexing opportunities. The kinetic inductance detector (KID) is capable of both properties. An incoming photon breaks Cooper pairs in the superconducting layer of the KID, which leads to a change in inductance, which can be detected with phase- and amplitude read-out. Photon noise, generation-recombination noise are inevitable noise sources, but two-level system noise can be minimized by adjusting the resonator and its geometry. To gain insight in the noise and loss sources this thesis investigates the difference between microstrip and co-planar waveguide resonators; and the difference between a silicon substrate and a silicon-on-insulator substrate. Numerical analysis shows that: noise in all types of resonators are dielectric bulk dominated; an Al superconducting layer shows has different losses in terms of Q-factor, compared to a NbTiN superconducting layer, but quantitatively the same internal Q-factor in the order of 105 is achieved; an Al superconducting layer in a microstrip has 5dBc/Hz and 2dBc/Hz higher noise in the metal-air and metal-edge interfaces, respectively, compared to a NbTiN superconducting layer; an Al on Si CPW and microstrip have the same Q-factor performance; an Al on Si CPW has a 2-8dBc/Hz more noise at all interfaces compared to an Al on Si microstrip; a buried oxide layer has no influence on the loss in terms of the Q-factor for 100nm Al on Si substrate CPWs; and that the noise of an Al on SOI CPW is bulk dominated, and the dielectric bulk contributes 10dBc/Hz more to the noise, compared to an Al on Si CPW. Experimental analysis shows that a gapwidth of wgap ? 10?m for Al on SOI CPWs shows no response, due to high two-level system noise. Low Q-factors in the order of 104 have been measured for Al on SOI CPWs, which is low compared to literature. A high set-up noise of -85dBc/Hz and divergent relationships with the internal power indicate that TLS-noise does not dominate the measurements, and set-up negatively influences the measurements. In conclusion, the resonator geometry is an important factor for the performance of a KID in terms of noise and Q-factors. A buried oxide layer has no consequence for the Q-factor, and negatively affects the noise of a CPW.

•Sep 24, 2015•0 citations

Ultra High Kinetic Inductance Detectors

Stefan Verheul

Microwave Kinetic Inductance Detectors (MKIDs) are extremely sensitive radiation detectors based on superconducting resonators that can be combined in large arrays on a single readout line within a limited frequency bandwidth. This makes MKIDs ideal detectors for the ultimate far-infrared observatory: a future space-based actively cooled telescope with its performance solely limited by the low universe background radiation. However, to reach these detector requirements, state-of-the-art MKIDs still need a order of magnitude improvement in device sensitivity. In this work, the MKID sensitivity is improved by reducing the aluminium volume that absorbs pair-breaking radiation into quasiparticle excitations, while making sure all radiation is still absorbed. Furthermore, a key requirement is sufficient reduction of excess noise as to keep the device intrinsically limited by thermally driven random fluctuations in the number of quasiparticles in absence of radiation, or Generation-Recombination (G-R) noise. To this end, a model is developed that describes the noise contributions as function of device geometry, readout power, material properties and radiation power. Subsequently, a realistic MKID design is presented and tested that reduces excess noise and maximises the sensitivity, expressed as Noise Equivalent Power (NEP). At high temperatures, good overall agreement is found between the measured noise spectra and the model. At low temperature T = 120 mK, the measurement results give an optical NEP similar to current state-of-the-art MKIDs. The NEP is not as low as expected due to short quasiparticle lifetimes, an unexpected decrease in the G-R noise level and a very high excess noise attributed to Two-Level Systems (TLS) noise that starts to dominate the already low G-R noise spectrum at low temperatures. Possibly, the quick quasiparticle lifetime saturation and noise level drop are caused by a strong readout power effect, as the readout power is known to create excess quasiparticles and to cause a strongly non-thermal electron energy distribution in the aluminium strip of the MKID. However, the exact microscopic details of these effects are unknown and not studied in this project. Based on the current chip design, a straightforward way to improve device performance and study the readout power effect in more detail is a reduction of the high TLS noise levels, which is possibly fabrication related. This would allow an unobstructed view of the G-R noise spectrum at low temperatures, thereby allowing both a study of the readout power effect on the quasiparticle system, and ultimately achieving the improvement in NEP needed reach the detector requirements for the ultimate space-based far-infrared observatory.

•Jan 1, 2019•0 citations

Dual-resonator kinetic inductance detector for distinction between signal and 1/f frequency noise

N. Foroozani, Bahman Sarabi, S. H. Moseley +4 more

Astronomical kinetic inductance detectors (KIDs), similar to quantum information devices, experience performance-limiting noise from materials. In particular, $1/f$ (frequency) noise arises from two-level system defects (TLSs) in the circuit dielectrics and material interfaces and can be a dominant noise mechanism. Here, we present a dual-resonator KID (DuRKID), which is designed for improved noise-equivalent power relative to standard $1/f$-noise-limited KIDs. In this study we present the DuRKID schematic, a fabricated example, our first measurement results, a theoretical model including $1/f$ noise, and a system-noise model containing additional noise sources. The circuit consists of two superconducting resonators sharing an electrical capacitance bridge of four capacitors, each of which hosts TLSs. The device is intended to operate using hybridization of the modes, which causes TLSs to either couple to one mode or the other, depending upon which capacitor they reside in. In contrast, the signal will affect a resonator inductance and, due to mode hybridization, this causes correlated frequency changes in both modes. Therefore, one can better distinguish the photon signal from the TLS frequency noise. To achieve hybridization, a $\mathrm{Ti}\mathrm{N}$ inductor is current biased to allow tuning of one bare-resonator mode into degeneracy with the other. Measurements show that the resonator modes hybridize as expected. The inter-resonator coupling and unintentional coupling of the two resonators to transmission lines are also characterized in measurements. A quantum information-science model allows device-parameter extraction from experimental data and a $1/f$ noise analysis with uncorrelated noise. A system-noise analysis of the DuRKID, with comparisons to standard KIDs, is performed with generation-recombination noise and amplifier noise. The study reveals that the DuRKID can exhibit a large performance advantage over TLS-limited KID detectors.

arXiv:2202.11310•Physical Review Applied•Jan 8, 2024•1 citation
Kinetic Inductance Detectors (KIDs) represent a cornerstone of modern millimeter-wave, sub-millimeter, and far-infrared astronomical instrumentation, offering unmatched multiplexing capabilities for large-format focal planes in cosmic microwave background (CMB) polarimetry and spectroscopic survey telescopes. Operating at deep cryogenic temperatures () via the modulation of superconducting surface impedance under photon-induced pair breaking [11], KIDs rely on the kinetic inductance effect to translate Cooper-pair density variations into resonant frequency and phase shifts. However, their ultimate sensitivity is frequently limited by excess low-frequency phase and amplitude noise that traditional quasiparticle generation-recombination (G-R) and Two-Level System (TLS) surface defect models fail to fully resolve. In this work, we extend our first-principles inter-site fluctuation mechanics —previously established for Transition-Edge Sensors (TES) and cryogenic field-effect transistors—to the dissipative electrodynamic transport regime of superconducting microresonators. We present a rigorous field-theoretic derivation of the inter-site fluctuation matrix governing amorphous dielectric-superconductor interfaces and grain boundaries in high-Q superconducting microstrip and coplanar waveguide (CPW) geometries. By decoupling classical thermal activation from quantum zero-point phase dispersion, we formulate a unified stochastic master equation that couples quantum inter-site tunneling, superconductive order-parameter phase dynamics, and non-equilibrium quasiparticle generation-recombination kinetics. We derive the exact non-stationary relaxation time distribution and the resulting resonant frequency noise spectral density, and integrate this framework into a modified Mattis-Bardeen surface impedance and phase readout formulation. Finally, we outline a high-performance MATLAB simulation architecture designed to validate the tripartite noise hierarchy across cryogenic operational regimes, providing instrument designers with an uncompromising theoretical foundation for next-generation focal-plane optimization.
Transition-Edge Sensors (TES) represent the state-of-the-art in ultra-sensitive cryogenic radiation detection for cosmic microwave background (CMB) polarimetry and sub-millimeter astronomy. Operating within deep cryogenic regimes on the razor-sharp edge of a superconducting transition, these devices exhibit excess low-frequency noise spectra that severely constrain instrumental sensitivity below 10 Hz. Conventional bolometric noise models—relying on classical thermal fluctuation noise (TFNN), phenomenological Hooge parameters, or standard Dutta-Horn thermal activation—fail to capture the anomalous spectral upturns and non-stationary behavior observed in disordered superconducting bilayers (e.g., Ti/Au or Mo/Au). In this work, we present a rigorous, first-principles derivation of inter-site fluctuation mechanics tailored exclusively to the dissipative DC transport regime of Transition-Edge Sensors. We dismantle the historical conflation of TES and kinetic inductance detector (KID) noise models, establishing instead a tripartite noise hierarchy governed by: (1) Quantum Fluctuations, which dictate zero-point phase dispersion and barrier tunneling across disordered microstructures when classical Arrhenius activation freezes out; (2) Superconductive Fluctuations, which drive order-parameter phase dynamics, Cooper-pair density modulation, and the mesoscopic "fluctuation of fluctuations" via the dynamical breathing of normal-superconducting domain boundaries; (3) Classical Thermal Fluctuations, recovered strictly as the high-temperature asymptotic limit. By formulating a coupled stochastic master equation and non-Hermitian dissipation kernels, we derive the exact non-stationary relaxation time distribution and inter-site resistance noise spectral density . We then incorporate this framework into a modified electrothermal feedback (ETF) and Noise Equivalent Power (NEP) formulation, providing an uncompromising theoretical foundation for next-generation astrophysical instrumentation.
Superconductor-Insulator-Superconductor (SIS) mixers and Josephson junction detectors operate at millikelvin temperatures and represent the pinnacle of sensitive heterodyne detection for sub-millimeter wave and terahertz radio astronomy, as well as cosmic microwave background (CMB) instrumentation. While photon-assisted quasiparticle tunneling yields quantum-limited conversion gain, the ultimate sensitivity of SIS receivers and superconducting quantum detectors is fundamentally limited by low-frequency flicker noise and current fluctuations arising from trapped vortex motion, sub-gap leakage currents, and barrier interface defects. Conventional BCS-based tunneling models and empirical semiconductor noise formulas fail to capture the non-linear spectral upturns and phase jitter induced by quantum phase slips in disordered barrier junctions. Here, we present a first-principles derivation of inter-site fluctuation mechanics applied specifically to SIS tunnel junctions and Josephson device barriers. By framing quasiparticle trapping and Cooper pair tunneling across the insulating barrier as a stochastic transition network governed by zero-point random network matrix fluctuations, we eliminate phenomenological noise parameters. We derive the exact spectral density governing sub-gap current noise and phase diffusion, incorporate non-Hermitian Lindblad dissipation kernels to model vortex pinning relaxation, and establish closed-form expressions for the input-referred noise temperature in terahertz heterodyne receivers.
Kinetic inductance detectors (KIDs) are superconducting thin-film microresonators that are sensitive photon detectors. These detectors are a candidate for the next generation of experiments designed to measure the polarization of the cosmic microwave background (CMB). I discuss the basic theory needed to understand the response of a KID to light, focusing on the dynamics of the quasiparticle system. I derive an equation that describes the dynamics of the quasiparticle number, solve it in a simplified form not previously published, and show that it can describe the dynamic response of a detector. Magnetic flux vortices in a superconducting thin film can be a significant source of dissipation, and I demonstrate some techniques to prevent their formation. Based on the presented theory, I derive a corrected version of a widely-used equation for the quasiparticle recombination noise in a KID. I show that a KID consisting of a lumped-element resonator can be sensitive enough to be limited by photon noise, which is the fundamental limit for photometry, at a level of optical loading below levels in ground-based CMB experiments. Finally, I describe an ongoing project to develop multichroic KID pixels that are each sensitive to two linear polarization states in two spectral bands, intended for the next generation of CMB experiments. I show that a prototype 23-pixel array can detect millimeter-wave light, and present characterization measurements of the detectors.
Space-based astronomy is in need of a photon-noise limited detector with multiplexing opportunities. The kinetic inductance detector (KID) is capable of both properties. An incoming photon breaks Cooper pairs in the superconducting layer of the KID, which leads to a change in inductance, which can be detected with phase- and amplitude read-out. Photon noise, generation-recombination noise are inevitable noise sources, but two-level system noise can be minimized by adjusting the resonator and its geometry. To gain insight in the noise and loss sources this thesis investigates the difference between microstrip and co-planar waveguide resonators; and the difference between a silicon substrate and a silicon-on-insulator substrate. Numerical analysis shows that: noise in all types of resonators are dielectric bulk dominated; an Al superconducting layer shows has different losses in terms of Q-factor, compared to a NbTiN superconducting layer, but quantitatively the same internal Q-factor in the order of 105 is achieved; an Al superconducting layer in a microstrip has 5dBc/Hz and 2dBc/Hz higher noise in the metal-air and metal-edge interfaces, respectively, compared to a NbTiN superconducting layer; an Al on Si CPW and microstrip have the same Q-factor performance; an Al on Si CPW has a 2-8dBc/Hz more noise at all interfaces compared to an Al on Si microstrip; a buried oxide layer has no influence on the loss in terms of the Q-factor for 100nm Al on Si substrate CPWs; and that the noise of an Al on SOI CPW is bulk dominated, and the dielectric bulk contributes 10dBc/Hz more to the noise, compared to an Al on Si CPW. Experimental analysis shows that a gapwidth of wgap ? 10?m for Al on SOI CPWs shows no response, due to high two-level system noise. Low Q-factors in the order of 104 have been measured for Al on SOI CPWs, which is low compared to literature. A high set-up noise of -85dBc/Hz and divergent relationships with the internal power indicate that TLS-noise does not dominate the measurements, and set-up negatively influences the measurements. In conclusion, the resonator geometry is an important factor for the performance of a KID in terms of noise and Q-factors. A buried oxide layer has no consequence for the Q-factor, and negatively affects the noise of a CPW.
Microwave Kinetic Inductance Detectors (MKIDs) are extremely sensitive radiation detectors based on superconducting resonators that can be combined in large arrays on a single readout line within a limited frequency bandwidth. This makes MKIDs ideal detectors for the ultimate far-infrared observatory: a future space-based actively cooled telescope with its performance solely limited by the low universe background radiation. However, to reach these detector requirements, state-of-the-art MKIDs still need a order of magnitude improvement in device sensitivity. In this work, the MKID sensitivity is improved by reducing the aluminium volume that absorbs pair-breaking radiation into quasiparticle excitations, while making sure all radiation is still absorbed. Furthermore, a key requirement is sufficient reduction of excess noise as to keep the device intrinsically limited by thermally driven random fluctuations in the number of quasiparticles in absence of radiation, or Generation-Recombination (G-R) noise. To this end, a model is developed that describes the noise contributions as function of device geometry, readout power, material properties and radiation power. Subsequently, a realistic MKID design is presented and tested that reduces excess noise and maximises the sensitivity, expressed as Noise Equivalent Power (NEP). At high temperatures, good overall agreement is found between the measured noise spectra and the model. At low temperature T = 120 mK, the measurement results give an optical NEP similar to current state-of-the-art MKIDs. The NEP is not as low as expected due to short quasiparticle lifetimes, an unexpected decrease in the G-R noise level and a very high excess noise attributed to Two-Level Systems (TLS) noise that starts to dominate the already low G-R noise spectrum at low temperatures. Possibly, the quick quasiparticle lifetime saturation and noise level drop are caused by a strong readout power effect, as the readout power is known to create excess quasiparticles and to cause a strongly non-thermal electron energy distribution in the aluminium strip of the MKID. However, the exact microscopic details of these effects are unknown and not studied in this project. Based on the current chip design, a straightforward way to improve device performance and study the readout power effect in more detail is a reduction of the high TLS noise levels, which is possibly fabrication related. This would allow an unobstructed view of the G-R noise spectrum at low temperatures, thereby allowing both a study of the readout power effect on the quasiparticle system, and ultimately achieving the improvement in NEP needed reach the detector requirements for the ultimate space-based far-infrared observatory.
Astronomical kinetic inductance detectors (KIDs), similar to quantum information devices, experience performance-limiting noise from materials. In particular, 1/f1/f1/f (frequency) noise arises from two-level system defects (TLSs) in the circuit dielectrics and material interfaces and can be a dominant noise mechanism. Here, we present a dual-resonator KID (DuRKID), which is designed for improved noise-equivalent power relative to standard 1/f1/f1/f-noise-limited KIDs. In this study we present the DuRKID schematic, a fabricated example, our first measurement results, a theoretical model including 1/f1/f1/f noise, and a system-noise model containing additional noise sources. The circuit consists of two superconducting resonators sharing an electrical capacitance bridge of four capacitors, each of which hosts TLSs. The device is intended to operate using hybridization of the modes, which causes TLSs to either couple to one mode or the other, depending upon which capacitor they reside in. In contrast, the signal will affect a resonator inductance and, due to mode hybridization, this causes correlated frequency changes in both modes. Therefore, one can better distinguish the photon signal from the TLS frequency noise. To achieve hybridization, a TiN\mathrm{Ti}\mathrm{N}TiN inductor is current biased to allow tuning of one bare-resonator mode into degeneracy with the other. Measurements show that the resonator modes hybridize as expected. The inter-resonator coupling and unintentional coupling of the two resonators to transmission lines are also characterized in measurements. A quantum information-science model allows device-parameter extraction from experimental data and a 1/f1/f1/f noise analysis with uncorrelated noise. A system-noise analysis of the DuRKID, with comparisons to standard KIDs, is performed with generation-recombination noise and amplifier noise. The study reveals that the DuRKID can exhibit a large performance advantage over TLS-limited KID detectors.