Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Nature Communications

Photon-pairing-enhanced distributed spectroscopy sensing over 400 km optical fiber

Jinping Lin, Lai Zhou, Minxue Zhuang, Wenda Shi, Zhenke Shi, Lin Chang, Zhiliang L. Yuan

Published Oct 31, 2026• 0 citations
Publisher

Abstract

Single-photon detection enables sensitive measurements at ultra-low photon fluxes, supporting long-range sensing and imaging tasks. Photon-counting schemes reconstruct spectra by coherently accumulating interferograms, but phase fluctuations between interfering beams pose challenges for distributed spectroscopy. Here, we introduce a photon-pairing scheme that exploits second-order correlations rather than relying on first-order interference, thereby removing the need for phase alignment of interferograms while enabling long integration times. Our approach enhances the signal-to-noise ratio (SNR) of reconstructed spectra, with SNR increasing linearly with photon count rate, in contrast to the square-root dependence of photon-counting techniques. We accurately reconstruct intensity spectra at an average receiving power of only 5.5 × 10−15 W per comb line over a 400 km fiber link in a distributed configuration, achieving an SNR of over 23.5 dB and demonstrating strong resilience to fiber-induced fluctuations. Our photon-pairing scheme holds strong potential for long-haul dual-comb spectroscopy and opens new avenues for frequency metrology, remote sensing, and quantum networking. Photon-pairing spectroscopy overcomes phase fluctuations to enable sensitive spectral measurements over 400 km of fibre. The study achieves spectral reconstruction at an ultra-low power of 5.5 × 10-15 W per comb line, advancing long-range sensing.

DOI
10.1038/s41467-026-78826-w

Related papers

Entangled Dual-Comb Spectroscopy

Abdulkarim Hariri, Shuai Liu, Haowei Shi +3 more

Optical frequency combs have emerged as a cornerstone for a wide range of areas, including spectroscopy, ranging, optical clocks, time and frequency transfer, waveform synthesis, and communications. However, quantum-mechanical fluctuations of the optical carrier impose fundamental performance limits on the precision of classical optical frequency combs, particularly in their use for interferometry and spectroscopy. Entanglement, as a quintessential quantum resource, allows for surpassing the fundamental limits of classical systems. Here, we introduce entanglement into the realm of optical frequency combs, formulating entangled dual-comb spectroscopy (EDCS) that surmounts the fundamental limits of classical DCS. EDCS capitalizes on tailored entangled structures across the frequency comb, enabling simultaneous detection of all comb lines below the standard quantum limit of classical DCS. Applying EDCS in gas detection, we achieve a 2.6-dB enhancement in signal-to-noise ratio and a 1.7-fold reduction in integration time over classical DCS, rendering EDCS particularly suited for dynamic chemical and biological sensing, where fast, precise measurements subject to power constraints are required. EDCS opens a new avenue for exploiting quantum frequency combs, underscoring their prospects in a plethora of applications in precision metrology, spectroscopy, and timekeeping.

arXiv:2412.19800•Physical Review X•Aug 28, 2025•14 citations

Quantum correlation-enhanced dual-comb spectroscopy

Zhuoren Wan, Yuan Chen, Xiuxiu Zhang +2 more

Dual-comb spectroscopy (DCS) is a powerful technique for spectroscopic sensing, offering exceptional spectral bandwidth, resolution, precision, and speed. However, its performance is fundamentally limited by quantum noise inherent to coherent-state optical combs. Here, we overcome this barrier by introducing quantum correlation-enhanced DCS using correlated twin combs generated via seeded four-wave mixing. One comb acts as a local oscillator to decode molecular signals, while the twin suppresses shot noise through intensity-difference squeezing, achieving a 2 dB signal-to-noise ratio improvement beyond the shot-noise limit-equivalent to a 2.6× measurement speed enhancement. Notably, when coupled with up-conversion spectroscopy, our technique records comb-line-resolved, high-resolution (7.5 pm) spectra in the critical 3 μm region for molecular fingerprinting. These results bridge quantum optics and frequency comb spectroscopy, offering great potential for trace gas detection, precision metrology, and chemical analysis. Future developments in detector efficiency and nanophotonic integration could further enhance its scalability and impact.

Light Science & Applications•Aug 1, 2025•40 citations

Enhancing Quantum Optical Sensing and Metrology using Correlation and Entanglement of Quantum and Classical Light

Liu Han

Quantum states of light play a pivotal role in pushing the boundaries of sensitivity and accuracy in optical sensing and metrology, surpassing the limitations of classical laser sources. This thesis explores the innovative approach of harnessing the unique correlation and entanglement properties of quantum light for two vital applications in the field: optical target detection and fiber optical sensing and metrology. In the first half of this thesis, we explore the possibilities of using time-frequency correlation and entanglement of quantum (and quantum-inspired) light sources to enhance the noise resilience of optical target detection. We present three optical target detection protocols based on different yet similar operational principles, and they correspondingly offer different quantum (or quantum-inspired) enhancements. First, it is shown that by characterizing the temporal correlation between entangled photons through temporal domain photon counting, the impact of uncorrelated background noise can be drastically reduced. Second, we show that in addition to temporal correlation, frequency correlation can also be simultaneously analyzed through the joint measurement of time-frequency entanglement. Theoretical analysis shows that, by doing so, twice as much noise resilience can be achieved as compared to using temporal correlation alone. Third, we show that the coherent optical receiver used in the previous protocol can also be used in classical LiDARs. Such a quantum-inspired LiDAR is capable of a larger detection range (with high-power classical sources) while retaining similar noise resilience enhancement (over 100 dB rejection of inband noise with a 100 ms integration time). In the second half of the thesis, we present a novel all-fiber-based squeezed light source based on travelling-wave optical parametric amplification. Its operational principle is inspired by the time-frequency entanglement properties of quantum photon pairs and the bichromatic local oscillator technique. We experimentally demonstrate over 5.05 dB shot noise reduction (detection limited) using balanced homodyne detection. We anticipate that its robust, all-fiber form factor can benefit practical fiber optical sensing and metrology applications, such as fiber optical gyroscopes and distributed fiber sensing.

•Nov 1, 2024•0 citations

Remote fiber sensing by quantum spectroscopy using frequency entangled photons via a real-world fiber network

Masahiro Ishizeki, Tomoya Okita, Akifumi Asahara +2 more

Quantum optics has attracted significant interest owing to its potential for novel applications in fields such as computing, communication, and sensing. With advancements in single photon generation and detection in the telecom band, quantum remote applications utilizing the nonlocality of entangled photon pairs are becoming increasingly viable. In this study, we demonstrate quantum remote spectroscopy by transmitting frequency entangled photons through a real-world fiber network. In the experiment, entangled photon pairs in the telecom band (photon 1 and photon 2) were generated via spontaneous parametric down-conversion in a type-II PPMgSLT crystal using a mode-locked Ti:Sapphire laser (76MHz repetition rate, 792nm center wavelength). The photon pairs were separated with a fiber polarization beam splitter. Photon 1 was transmitted through a 2.6-km real-world fiber network and programmable spectral filter, serving as the sample under investigation. Both photons were detected using superconducting single photon detectors (SSPDs). Quantum frequency correlation, termed joint spectral intensity (JSI), was obtained as a two-dimensional histogram utilizing coincidence counting and time-stretch methods. The spectrum of photon 2, which did not transmit fiber network and spectral filter, was obtained by projecting the JSI. Although photon 1 interact with the fiber network and programmable filter, the spectrum of photon 2 exhibited strong agreement with the reference spectrum defined by programmable filter. Finally, one photon of the pair was transmitted over a 2.6km real-world fiber network with a fiber sensor. Using quantum frequency correlation, the spectral information of the fiber sensor was deduced remotely from the spectrum of the counter part of the photon, which did not directly interact with the sensor. This demonstrated the feasibility of remote spectroscopic sensing using frequency entanglement via a real-world fiber network. The findings pave the way for practical quantum remote spectroscopy, obviating the need for sophisticated spectroscopic equipment at the remote site.

Quantum Sensing and Nano Electronics and Photonics•Jan 23, 2025•1 citation

Distributed dual-comb spectroscopy

Haowei Shi, Kartikeya Arora, Zheshen Zhang +1 more

We propose distributed dual-comb spectroscopy, a quantum-enhanced sensing architecture that simultaneously exploits spatial- and spectral-domain entanglement to improve the extraction of global spectroscopic information across broadband frequency ranges. Our scheme consists of a network of Mach-Zehnder interferometers interrogating spatially separated samples, each driven by a classical frequency comb at the bright port. A single two-mode squeezed frequency comb is distributed through a passive beam-splitter array into $K$ entangled combs, establishing multipartite correlations across sensors while preserving intrinsic spectral entanglement. The protocol is compatible with both heterodyne detection and division detection, and enables parallel estimation of weighted-average absorption features over multiple frequency components. Compared with spatially separable quantum strategies requiring $K$ independently engineered nonclassical comb sources, our approach achieves enhanced signal-to-noise performance using only a single quantum resource distributed across the network. These results establish a scalable route toward broadband distributed quantum spectroscopy with simultaneous spatial and spectral advantage.

quant-pharXiv:2610.30462•Oct 23, 2026•0 citations

Enabling phase stabilization of quantum networks via displacement-enhanced photon counting

M. V. Jabir, Daehyun Ahn, N. Fajar R. Annafianto +3 more

Optical phase stabilization, tracking, and locking in long fiber links are pivotal for the functionality of many communication protocols and distributed sensors. However, conventional phase stabilization methods use strong optical probe signals that may contaminate and destroy fragile quantum signals propagating in the same fiber link. Here, we experimentally demonstrate phase locking of fiber spools up to 100 km and over 120 km deployed optical communication link using faint coherent states with an average of just photons per second detected at the receiving detector as a probe signal. The power spectral density of phase noise, integrated from 1 Hz to 50 kHz, yields an excess rms phase noise of 110 mrad (corresponding to timing jitter below 0.09 fs) for a 100 km fiber spool and 140 mrad (corresponding to rms timing jitter below 0.12 fs) for deployed fiber. The displacement-enhanced measurement protocol that we employ for phase stabilization yields Fisher information that is greater than that of homodyne and heterodyne measurement protocols for fiber links longer than 100 m and, therefore, exceeds the canonical shot noise limit of accuracy. By implementing this stabilization strategy with a 50% duty cycle, we enable time-division multiplexed faint light and quantum payloads to coexist within the same communication channel.

Optica•Mar 21, 2025•8 citations
Single-photon detection enables sensitive measurements at ultra-low photon fluxes, supporting long-range sensing and imaging tasks. Photon-counting schemes reconstruct spectra by coherently accumulating interferograms, but phase fluctuations between interfering beams pose challenges for distributed spectroscopy. Here, we introduce a photon-pairing scheme that exploits second-order correlations rather than relying on first-order interference, thereby removing the need for phase alignment of interferograms while enabling long integration times. Our approach enhances the signal-to-noise ratio (SNR) of reconstructed spectra, with SNR increasing linearly with photon count rate, in contrast to the square-root dependence of photon-counting techniques. We accurately reconstruct intensity spectra at an average receiving power of only 5.5 × 10−15 W per comb line over a 400 km fiber link in a distributed configuration, achieving an SNR of over 23.5 dB and demonstrating strong resilience to fiber-induced fluctuations. Our photon-pairing scheme holds strong potential for long-haul dual-comb spectroscopy and opens new avenues for frequency metrology, remote sensing, and quantum networking. Photon-pairing spectroscopy overcomes phase fluctuations to enable sensitive spectral measurements over 400 km of fibre. The study achieves spectral reconstruction at an ultra-low power of 5.5 × 10-15 W per comb line, advancing long-range sensing.
Optical frequency combs have emerged as a cornerstone for a wide range of areas, including spectroscopy, ranging, optical clocks, time and frequency transfer, waveform synthesis, and communications. However, quantum-mechanical fluctuations of the optical carrier impose fundamental performance limits on the precision of classical optical frequency combs, particularly in their use for interferometry and spectroscopy. Entanglement, as a quintessential quantum resource, allows for surpassing the fundamental limits of classical systems. Here, we introduce entanglement into the realm of optical frequency combs, formulating entangled dual-comb spectroscopy (EDCS) that surmounts the fundamental limits of classical DCS. EDCS capitalizes on tailored entangled structures across the frequency comb, enabling simultaneous detection of all comb lines below the standard quantum limit of classical DCS. Applying EDCS in gas detection, we achieve a 2.6-dB enhancement in signal-to-noise ratio and a 1.7-fold reduction in integration time over classical DCS, rendering EDCS particularly suited for dynamic chemical and biological sensing, where fast, precise measurements subject to power constraints are required. EDCS opens a new avenue for exploiting quantum frequency combs, underscoring their prospects in a plethora of applications in precision metrology, spectroscopy, and timekeeping.
Dual-comb spectroscopy (DCS) is a powerful technique for spectroscopic sensing, offering exceptional spectral bandwidth, resolution, precision, and speed. However, its performance is fundamentally limited by quantum noise inherent to coherent-state optical combs. Here, we overcome this barrier by introducing quantum correlation-enhanced DCS using correlated twin combs generated via seeded four-wave mixing. One comb acts as a local oscillator to decode molecular signals, while the twin suppresses shot noise through intensity-difference squeezing, achieving a 2 dB signal-to-noise ratio improvement beyond the shot-noise limit-equivalent to a 2.6× measurement speed enhancement. Notably, when coupled with up-conversion spectroscopy, our technique records comb-line-resolved, high-resolution (7.5 pm) spectra in the critical 3 μm region for molecular fingerprinting. These results bridge quantum optics and frequency comb spectroscopy, offering great potential for trace gas detection, precision metrology, and chemical analysis. Future developments in detector efficiency and nanophotonic integration could further enhance its scalability and impact.
Quantum states of light play a pivotal role in pushing the boundaries of sensitivity and accuracy in optical sensing and metrology, surpassing the limitations of classical laser sources. This thesis explores the innovative approach of harnessing the unique correlation and entanglement properties of quantum light for two vital applications in the field: optical target detection and fiber optical sensing and metrology. In the first half of this thesis, we explore the possibilities of using time-frequency correlation and entanglement of quantum (and quantum-inspired) light sources to enhance the noise resilience of optical target detection. We present three optical target detection protocols based on different yet similar operational principles, and they correspondingly offer different quantum (or quantum-inspired) enhancements. First, it is shown that by characterizing the temporal correlation between entangled photons through temporal domain photon counting, the impact of uncorrelated background noise can be drastically reduced. Second, we show that in addition to temporal correlation, frequency correlation can also be simultaneously analyzed through the joint measurement of time-frequency entanglement. Theoretical analysis shows that, by doing so, twice as much noise resilience can be achieved as compared to using temporal correlation alone. Third, we show that the coherent optical receiver used in the previous protocol can also be used in classical LiDARs. Such a quantum-inspired LiDAR is capable of a larger detection range (with high-power classical sources) while retaining similar noise resilience enhancement (over 100 dB rejection of inband noise with a 100 ms integration time). In the second half of the thesis, we present a novel all-fiber-based squeezed light source based on travelling-wave optical parametric amplification. Its operational principle is inspired by the time-frequency entanglement properties of quantum photon pairs and the bichromatic local oscillator technique. We experimentally demonstrate over 5.05 dB shot noise reduction (detection limited) using balanced homodyne detection. We anticipate that its robust, all-fiber form factor can benefit practical fiber optical sensing and metrology applications, such as fiber optical gyroscopes and distributed fiber sensing.
Quantum optics has attracted significant interest owing to its potential for novel applications in fields such as computing, communication, and sensing. With advancements in single photon generation and detection in the telecom band, quantum remote applications utilizing the nonlocality of entangled photon pairs are becoming increasingly viable. In this study, we demonstrate quantum remote spectroscopy by transmitting frequency entangled photons through a real-world fiber network. In the experiment, entangled photon pairs in the telecom band (photon 1 and photon 2) were generated via spontaneous parametric down-conversion in a type-II PPMgSLT crystal using a mode-locked Ti:Sapphire laser (76MHz repetition rate, 792nm center wavelength). The photon pairs were separated with a fiber polarization beam splitter. Photon 1 was transmitted through a 2.6-km real-world fiber network and programmable spectral filter, serving as the sample under investigation. Both photons were detected using superconducting single photon detectors (SSPDs). Quantum frequency correlation, termed joint spectral intensity (JSI), was obtained as a two-dimensional histogram utilizing coincidence counting and time-stretch methods. The spectrum of photon 2, which did not transmit fiber network and spectral filter, was obtained by projecting the JSI. Although photon 1 interact with the fiber network and programmable filter, the spectrum of photon 2 exhibited strong agreement with the reference spectrum defined by programmable filter. Finally, one photon of the pair was transmitted over a 2.6km real-world fiber network with a fiber sensor. Using quantum frequency correlation, the spectral information of the fiber sensor was deduced remotely from the spectrum of the counter part of the photon, which did not directly interact with the sensor. This demonstrated the feasibility of remote spectroscopic sensing using frequency entanglement via a real-world fiber network. The findings pave the way for practical quantum remote spectroscopy, obviating the need for sophisticated spectroscopic equipment at the remote site.
We propose distributed dual-comb spectroscopy, a quantum-enhanced sensing architecture that simultaneously exploits spatial- and spectral-domain entanglement to improve the extraction of global spectroscopic information across broadband frequency ranges. Our scheme consists of a network of Mach-Zehnder interferometers interrogating spatially separated samples, each driven by a classical frequency comb at the bright port. A single two-mode squeezed frequency comb is distributed through a passive beam-splitter array into KKK entangled combs, establishing multipartite correlations across sensors while preserving intrinsic spectral entanglement. The protocol is compatible with both heterodyne detection and division detection, and enables parallel estimation of weighted-average absorption features over multiple frequency components. Compared with spatially separable quantum strategies requiring KKK independently engineered nonclassical comb sources, our approach achieves enhanced signal-to-noise performance using only a single quantum resource distributed across the network. These results establish a scalable route toward broadband distributed quantum spectroscopy with simultaneous spatial and spectral advantage.
Optical phase stabilization, tracking, and locking in long fiber links are pivotal for the functionality of many communication protocols and distributed sensors. However, conventional phase stabilization methods use strong optical probe signals that may contaminate and destroy fragile quantum signals propagating in the same fiber link. Here, we experimentally demonstrate phase locking of fiber spools up to 100 km and over 120 km deployed optical communication link using faint coherent states with an average of just photons per second detected at the receiving detector as a probe signal. The power spectral density of phase noise, integrated from 1 Hz to 50 kHz, yields an excess rms phase noise of 110 mrad (corresponding to timing jitter below 0.09 fs) for a 100 km fiber spool and 140 mrad (corresponding to rms timing jitter below 0.12 fs) for deployed fiber. The displacement-enhanced measurement protocol that we employ for phase stabilization yields Fisher information that is greater than that of homodyne and heterodyne measurement protocols for fiber links longer than 100 m and, therefore, exceeds the canonical shot noise limit of accuracy. By implementing this stabilization strategy with a 50% duty cycle, we enable time-division multiplexed faint light and quantum payloads to coexist within the same communication channel.