Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Journal of Solid-State Circuits

A 16-Channel Cryo-CMOS Flux Control Pulse Generator ASIC

Kevin Tien, David J. Frank, John F. Bulzacchelli, Pat Rosno, Daniel Moertl, Subhajit Ray, John Timmerwilke, Ari Noori, Devin Underwood, Ken Inoue, Pier Andrea Francese, Mark Yeck, Daniel Ramirez, Timothy J. Schmerbeck, Bryce Snell, Jeremy T. Ekman, Ryan Black, Tom Haselhorst, Emma Erickson, Kevin Demsky, Christian W. Baks, Jonathan Kaus, Andrea Ruffino, Andy Davies, Sudipto Chakraborty, Scott Lekuch, B. Gaucher, Bodhisatwa Sadhu, Scott M. Willenborg, Daniel J. Friedman

Published Oct 30, 2026• 0 citations
Publisher

Abstract

This article reports a 16-channel cryo-CMOS flux-control pulse generator ASIC demonstrated in conjunction with a superconducting-qubit-based quantum processor unit to advance the state of the art in cryo-CMOS-controlled two-qubit gate error rate. An architecture consistent with future scaled system requirements is presented and discussed. A qubit-limited error rate of 0.084% is achieved, demonstrating that the ASIC has sufficiently low noise, while dissipating <7 mW of power per flux control channel. Low noise with low power is realized using multiple methods. Three 10-bit sub-DACs, all referenced to an on-chip highly stable current reference and operating at different rates (up to 1 Gs/s), are combined to realize a pulse generator with 14-bit level resolution. Pre-compensation functionality is implemented in the on-chip digital processor to compensate for off-chip distortion. A custom SerDes designed for <1-mW power dissipation enables off-chip 2-Gb/s (to the chip) and 250-Mb/s (from the chip) communications.

DOI
10.1109/jssc.2026.3736028

Related papers

22.2 A 16-Channel Low-Power Cryo-CMOS Flux Control Pulse Generator ASIC in 14nm FinFET Technology

Kevin Tien, David J. Frank, John F. Bulzacchelli +27 more

This work presents a 16-channel flux pulse generator ASIC for qubit control in 14nm FinFET technology consuming$<7 \text{mW}$per channel. Multiple 10b sub-DACs operating at different rates (up to$1 \text{GS} / \mathrm{s}$) are used to realize a pulse generator with 14b level resolution and IIR precompensation. A custom SERDES designed for$<1 \text{mW}$power dissipation enables offchip$2 \text{Gb} / \mathrm{s}$(up) and$250 \text{Mb} / \mathrm{s}$(down) communications. Multi-qubit control is demonstrated, and measured error-per-2-qubit-gate is as low as 0.0017.

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Feb 15, 2026•4 citations

Transistors to transmons: large-scale cryogenic CMOS control of superconducting qubits

Devin Underwood

Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.

•Jul 3, 2026•0 citations

29.4 A Cryo-CMOS Quantum Computing Unit Interface Chipset in 28nm Bulk CMOS with Phase-Detection Based Readout and Phase-Shifter Based Pulse Generation

Yanshu Guo, Qichun Liu, Wenqiang Huang +9 more

Cryogenic CMOS (Cryo-CMOS) ASICs have drawn increasing attention with great potential in scaling down the quantum computing (QC) platform. Recently, several cryoCMOS ASICs have been presented in the literature, including the qubit state readout ASICs [1–4] and state controller ASICs [5–8]. For readout ASICs, the quadrature down conversion architecture is widely adopted, with the power consumption ranging from 20mW [1] to 75mW [2]. Also, significant progress has been made in reducing the power consumption of qubit controllers. The controller in [5] consumes a power of <4 mW/qubit under active control, when controlling a superconducting quantum computing unit cell. Nevertheless, it remains a long-term goal to reduce the power consumption and promote the integration level of readout/controller ASICs, in consideration of the increasing requirement on qubit number and the limited cooling power provided by the dilution refrigerator.

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Feb 18, 2024•32 citations

Design and Characterization of a <4-mW/Qubit 28-nm Cryo-CMOS Integrated Circuit for Full Control of a Superconducting Quantum Processor Unit Cell

Juhwan Yoo, Zijun Chen, Frank Arute +10 more

A universal fault-tolerant quantum computer will require large-scale control systems that can realize all the waveforms required to implement a gateset that is universal for quantum computing. Optimization of such a system, which must be precise and extensible, is an open research challenge. Here, we present a cryogenic quantum control integrated circuit (IC) that is able to control all the necessary degrees of freedom of a two-qubit subcircuit of a superconducting quantum processor. Specifically, the IC contains a pair of 4–8-GHz RF pulse generators for$XY$control, three baseband current generators for qubit and coupler frequency control, and a digital controller that includes a sequencer for gate sequence playback. After motivating the architecture, we describe the circuit-level implementation details and present experimental results. Using standard benchmarking techniques, we show that the cryogenic CMOS (cryo-CMOS) IC is able to execute the components of a gateset that is universal for quantum computing while achieving single-qubit$XY$and$Z$average gate error rates of 0.17%–0.36% and 0.14%–0.17%, respectively, as well as two-qubit average cross-entropy benchmarking (XEB) cycle error rates of 1.2%. These error rates, which were achieved while dissipating just 4 mW/qubit, are comparable to the measured error rates obtained using baseline room-temperature electronics.

IEEE Journal of Solid-State Circuits•Sep 15, 2023•31 citations

A 40-nm Cryo-CMOS Quantum Controller IC for Superconducting Qubit

Kiseo Kang, Donggyu Minn, Seongun Bae +5 more

This article presents a cryo-CMOS quantum controller IC for superconducting qubits. The proposed globally synchronized clock system internally generates different local oscillator (LO) frequencies using multiple phase-locked loops (PLLs) driven by a common reference clock. It provides flexibility in spectral management as well as scalability for expansion to a large-scale quantum controller. The test chip includes two PLLs, four pulse modulator channels, and two receiver channels. Implemented chip in 40-nm CMOS shows full functionalities at 3.5 K. The designed pulse modulator circuits are verified with the specifications for expected fidelity of 99.99%.

IEEE Journal of Solid-State Circuits•Aug 25, 2022•51 citations

A 28nm 6.5-8.1GHz 1.16mW/qubit Cryo-CMOS System-an-Chip for Superconducting Qubit Readout

Steven Van Winckel, Alican Çağlar, B. Gys +5 more

This paper presents a 28 nm cryo-CMOS system-on-chip (SoC) for the dispersive readout of superconducting qubits operating between 6.5-8.1 GHz at 4 K. The SoC includes a quadrature VCO and a full zero-IF transmitter and receiver chain, including 200 MS/s7-bit DACs, ADCs, and digital. It can generate pulses up to 640 ns duration, and it attains a very low-power readout operation (9.8 mW) compared to its counterparts with 0.5-0.6 dB noise figure, 65–89 dB gain, and -71 dBm maximum TX output power at 4 K. Furthermore, with its duty-cycled mode, the SoC reduces the average power dissipation for the readout application.

European Solid-State Circuits Conference (ESSCIRC)•Sep 19, 2022•16 citations
This article reports a 16-channel cryo-CMOS flux-control pulse generator ASIC demonstrated in conjunction with a superconducting-qubit-based quantum processor unit to advance the state of the art in cryo-CMOS-controlled two-qubit gate error rate. An architecture consistent with future scaled system requirements is presented and discussed. A qubit-limited error rate of 0.084% is achieved, demonstrating that the ASIC has sufficiently low noise, while dissipating <7 mW of power per flux control channel. Low noise with low power is realized using multiple methods. Three 10-bit sub-DACs, all referenced to an on-chip highly stable current reference and operating at different rates (up to 1 Gs/s), are combined to realize a pulse generator with 14-bit level resolution. Pre-compensation functionality is implemented in the on-chip digital processor to compensate for off-chip distortion. A custom SerDes designed for <1-mW power dissipation enables off-chip 2-Gb/s (to the chip) and 250-Mb/s (from the chip) communications.
This work presents a 16-channel flux pulse generator ASIC for qubit control in 14nm FinFET technology consuming<7mW<7 \text{mW}<7mWper channel. Multiple 10b sub-DACs operating at different rates (up to1GS/s1 \text{GS} / \mathrm{s}1GS/s) are used to realize a pulse generator with 14b level resolution and IIR precompensation. A custom SERDES designed for<1mW<1 \text{mW}<1mWpower dissipation enables offchip2Gb/s2 \text{Gb} / \mathrm{s}2Gb/s(up) and250Mb/s250 \text{Mb} / \mathrm{s}250Mb/s(down) communications. Multi-qubit control is demonstrated, and measured error-per-2-qubit-gate is as low as 0.0017.
Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.
Cryogenic CMOS (Cryo-CMOS) ASICs have drawn increasing attention with great potential in scaling down the quantum computing (QC) platform. Recently, several cryoCMOS ASICs have been presented in the literature, including the qubit state readout ASICs [1–4] and state controller ASICs [5–8]. For readout ASICs, the quadrature down conversion architecture is widely adopted, with the power consumption ranging from 20mW [1] to 75mW [2]. Also, significant progress has been made in reducing the power consumption of qubit controllers. The controller in [5] consumes a power of <4 mW/qubit under active control, when controlling a superconducting quantum computing unit cell. Nevertheless, it remains a long-term goal to reduce the power consumption and promote the integration level of readout/controller ASICs, in consideration of the increasing requirement on qubit number and the limited cooling power provided by the dilution refrigerator.
A universal fault-tolerant quantum computer will require large-scale control systems that can realize all the waveforms required to implement a gateset that is universal for quantum computing. Optimization of such a system, which must be precise and extensible, is an open research challenge. Here, we present a cryogenic quantum control integrated circuit (IC) that is able to control all the necessary degrees of freedom of a two-qubit subcircuit of a superconducting quantum processor. Specifically, the IC contains a pair of 4–8-GHz RF pulse generators forXYXYXYcontrol, three baseband current generators for qubit and coupler frequency control, and a digital controller that includes a sequencer for gate sequence playback. After motivating the architecture, we describe the circuit-level implementation details and present experimental results. Using standard benchmarking techniques, we show that the cryogenic CMOS (cryo-CMOS) IC is able to execute the components of a gateset that is universal for quantum computing while achieving single-qubitXYXYXYandZZZaverage gate error rates of 0.17%–0.36% and 0.14%–0.17%, respectively, as well as two-qubit average cross-entropy benchmarking (XEB) cycle error rates of 1.2%. These error rates, which were achieved while dissipating just 4 mW/qubit, are comparable to the measured error rates obtained using baseline room-temperature electronics.
This article presents a cryo-CMOS quantum controller IC for superconducting qubits. The proposed globally synchronized clock system internally generates different local oscillator (LO) frequencies using multiple phase-locked loops (PLLs) driven by a common reference clock. It provides flexibility in spectral management as well as scalability for expansion to a large-scale quantum controller. The test chip includes two PLLs, four pulse modulator channels, and two receiver channels. Implemented chip in 40-nm CMOS shows full functionalities at 3.5 K. The designed pulse modulator circuits are verified with the specifications for expected fidelity of 99.99%.
This paper presents a 28 nm cryo-CMOS system-on-chip (SoC) for the dispersive readout of superconducting qubits operating between 6.5-8.1 GHz at 4 K. The SoC includes a quadrature VCO and a full zero-IF transmitter and receiver chain, including 200 MS/s7-bit DACs, ADCs, and digital. It can generate pulses up to 640 ns duration, and it attains a very low-power readout operation (9.8 mW) compared to its counterparts with 0.5-0.6 dB noise figure, 65–89 dB gain, and -71 dBm maximum TX output power at 4 K. Furthermore, with its duty-cycled mode, the SoC reduces the average power dissipation for the readout application.