Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference

29.4 A Cryo-CMOS Quantum Computing Unit Interface Chipset in 28nm Bulk CMOS with Phase-Detection Based Readout and Phase-Shifter Based Pulse Generation

Yanshu Guo, Qichun Liu, Wenqiang Huang, Yaoyu Li, Tian Tian, Nan Wu, Siqi Zhang, Tiefu Li, Zhihua Wang, Ning Deng, Yuanjin Zheng, Hanjun Jiang

Published Feb 18, 2024• 32 citations
Publisher

Abstract

Cryogenic CMOS (Cryo-CMOS) ASICs have drawn increasing attention with great potential in scaling down the quantum computing (QC) platform. Recently, several cryoCMOS ASICs have been presented in the literature, including the qubit state readout ASICs [1–4] and state controller ASICs [5–8]. For readout ASICs, the quadrature down conversion architecture is widely adopted, with the power consumption ranging from 20mW [1] to 75mW [2]. Also, significant progress has been made in reducing the power consumption of qubit controllers. The controller in [5] consumes a power of <4 mW/qubit under active control, when controlling a superconducting quantum computing unit cell. Nevertheless, it remains a long-term goal to reduce the power consumption and promote the integration level of readout/controller ASICs, in consideration of the increasing requirement on qubit number and the limited cooling power provided by the dilution refrigerator.

DOI
10.1109/isscc49657.2024.10454392

Related papers

A Polar-Modulation-Based Cryogenic Qubit State Controller in 28nm Bulk CMOS

Yanshu Guo, Yaoyu Li, Wenqiang Huang +7 more

In today's mainstream superconducting quantum computing platforms in a dilution refrigerator, the qubits work at a cryogenic temperature (CT) of a few tens of mK, while the qubit controller hardware works on plates with temperature ranging from a few K to room temperature (RT). The highly-integrated cryo-CMOS qubit controller ASIC that can fully work at 3-4K has been proven to be the most feasible way to scale down the quantum computing system [1–5]. In [1], a pulse modulator is implemented with a limited qubit driving capability, which can only generate fixed length symmetric driving pulse. The controllers in [2], [3] generated the RF driving pulse with a frequency division multiplexing (FDM) mode, with the power dissipation of 192mW/qubit and 46.5mW/qubit, respectively. In [4], a local oscillator (LO) was included to improve the controller integration level, and the chip power consumption was 24.1mW/qubit. An arbitrary waveform generation (AWG) functionality digital design was presented in [5] with a power consumption of 23.1mW/qubit. Nevertheless, with continuously increasing number of qubits to integrate, it remains as one of the major tasks to further reduce the power consumption and size of controller.

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Feb 19, 2023•25 citations

Sub-mW/qubit 5.2-7.2GHz 65nm Cryo-CMOS RX for Scalable Quantum Computing Applications

Aravind Nagulu, Leonardo Ranzani, G. J. Riebell +3 more

Cryogenic CMOS control and readout circuits tightly interfaced with the qubits have emerged as a promising solution for future quantum computers with tens-of-thousands to millions of qubits [1] –[5]. A lownoise cryo-CMOS receiver at $3-4 \mathrm{~K}$ integrated tightly with the lowcryogenic quantum processor can relax or even potentially eliminated the need for the HEMT LNA, and keep the whole control loop at cryogenic temperature, hence avoiding any high-speed interconnects to room temperature (Fig. 1). Additionally, wide bandwidths in the receiver enables qubit-multiplexing, where qubits can be frequency multiplexed with a spacing of $10 \mathrm{MHz}-40 \mathrm{MHz}$, allowing anywhere from 10’s-100’s of qubits to be packed in to a single readout line with gigahertz-scale bandwidths. A second critical metric is power consumption, since the cooling power available in a typical dilution refrigerator is limited to a few watts at $3-4 \mathrm{~K}$. Therefore, the control and readout circuits should be designed with low power consumption, projected to be $\lt 1 \mathrm{~mW}$ per qubit (Fig. 1). While there has been initial progress in the design of cryo-CMOS readout systems, a leap forward is required in their overall power consumption to be viable for future quantum systems. In this work, we showcase the design and implementation of the first sub-mWper-qubit cryo-CMOS RX - a wideband, I/Q-downconversion, $4 \mathrm{~K}$ receiver for qubit readout that achieves $>1.9 \mathrm{GHz}$ of IF bandwidth with $>50 \mathrm{~dB}$ conversion gain and $0.7 \mathrm{~dB}$ NF while consuming only $17 \mathrm{~mW}$ of power consumption, thanks to various design techniques including near-threshold operation and low-1/f-noise passive mixers, representing $3-5 \times$ lower power consumption than prior works [2]–[3] while achieving similar noise, BW and gain performance. In addition, we demonstrate a real-time qubit read-out measurement by integrating our cryogenic-CMOS receiver with a transmon qubit.

Custom Integrated Circuits Conference•Apr 1, 2023•14 citations

13.1 A Fully Integrated Cryo-CMOS SoC for Qubit Control in Quantum Computers Capable of State Manipulation, Readout and High-Speed Gate Pulsing of Spin Qubits in Intel 22nm FFL FinFET Technology

Jong-Seok Park, Sushil Subramanian, Lester F. Lampert +14 more

Quantum computing promises exponential speed-up in solving certain complex problems that would be intractable by classical computers. However, thousands or millions of qubits might be required to solve useful problems. High-precision and low-noise electrical signals are required to manipulate and read the state of a qubit and to control qubit-to-qubit interactions. Current systems use room temperature electronics with many coax cables routed to the qubit chip inside a dilution refrigerator. This approach does not scale to large number of qubits, due to form factor, cost, power consumption and thermal load to the fridge. To address this challenge, a cryogenic qubit controller has been proposed [1]. The first integrated implementation of a cryogenic pulse modulator has been presented in [2], demonstrating the capability of manipulating (drive) the state of superconducting qubits. The work in [3] extends the capability of the controller with 3 main features: frequency-multiplexing to reduce the number of RF cables per qubit, an arbitrary I/Q pulse generation for improved control fidelity and a digitally-intensive architecture with integrated instruction set to enable integration in existing quantum control stacks. This work further advances the prior art by integrating the capability of reading the qubit state and generating the voltage pulses required for drive, readout, 2-qubit operations and qubit characterization. The SoC can drive up to 16 spin qubits by frequency multiplexing over a single RF line, read the state of up to 6 qubits simultaneously and control up to 22 gate potentials. The SoC also integrates a $\mu$-controller for increased flexibility in implementing the control instruction set. The proposed cryogenic controller can replace all the high-speed control electronics used in conventional solutions today, paving the way towards scalable quantum computers.

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Feb 13, 2021•99 citations

Overview of Cryo-CMOS Devices and Circuits for Quantum Computing Applications

R. R. Manikandan

A fault tolerant scalable quantum computer requires more than 1000 Qubits to perform real time state correction and to improve the Qubit coherence time. The dense wiring connections required between the quantum processor placed at a 100 mK temperature and the room temperature control and readout electronics serve as a limiting factor in this system. Qubit control and readout electronics operating at 4 K temperature, placed closer to a quantum processor inside the dilution refrigerator avoids the dense wiring connections to room temperature electronics, and hence, serve as a potential solution to realize a scalable quantum computer. However, with no CMOS process technology models available at cryogenic temperatures, the design of a fully integrated, ultra-low power Qubit control and readout electronics at a sub-1 mW power consumption proves to be extremely challenging. In recent years, there has been a huge rise in interest among the research communities to understand and solve the device and circuit level challenges at deep cryogenic temperatures. This paper presents an overview of the recently published active and passive device nonidealities, circuit design challenges and solutions, and the future research directions in the Qubit control and readout electronics operating at deep cryogenic temperatures.

IEEE International Symposium on Smart Electronic Systems (iSES)•Dec 18, 2023•2 citations

A Cryogenic Superconducting Quantum Computing Unit Interface Chipset With Phase-Detection-Based Readout and Phase-Shifter-Based Controller

Yanshu Guo, Yaoyu Li, Wenqiang Huang +9 more

This article presents a cryogenic quantum interface chipset at 3.5 K for superconducting transmon qubit operations. The chipset comprises a phase-detection readout and a phase-shifter-based polar-modulation controller with flexible scalability. With the proposed phase-detection readout scheme, a 9-bit time-to-digital converter (TDC)-based state detector is used to read out the qubit state by detecting the phase difference between the stimulus signal and the reflected signal. A low-IF N-path filter-based receiver and a multi-tone transmitter are co-designed to enable frequency-division multiplexing (FDM) dispersive readout of multiple qubits. A phase-shifter-based polar-modulation XY-driver is developed with support for fast phase quantum gate operation and derivative-removal-by-adiabatic-gate (DRAG) pulse generation. The Z-driver is realized using a static digital-to-analog converter (DAC) array and a 10-bit dynamic DAC for power efficiency. Fabricated in a 28-nm bulk CMOS process, the chipset occupies a die area of 4.6 mm2. The readout RX achieves a noise temperature of 40 K with a gain of 45–83 dB and a bandwidth of 1.2 GHz. The readout RX consumes 32% less power than state-of-the-art designs. The measured total readout power for simultaneous detection of two qubits is 12.2 mW, which is the lowest among readouts with a similar integration level. In addition, the controller achieves a spurious-free dynamic range (SFDR) of 49 dB for a 1-GS/s Z-driver and an SNR of 42 dB for a 1-GS/s XY-driver. The XY-driver consumes 4.3 mW per qubit under active control. Verified with practical transmon qubits, the readout fidelity exceeds 92.6%, approaching that of commercial instruments. A Rabi experiment at 5.61/6.36 MHz, a Ramsey experiment at 4.1 MHz, and a T1 experiment at$9.98~{\mu }$s are also successfully observed using the proposed chipset at 3.5 K.

IEEE Journal of Solid-State Circuits•May 27, 2026•2 citations

Cryogenic CMOS Integrated Circuits for Scalable Readout of Silicon Quantum Computers

Andrea Ruffino

Quantum computing promises to revolutionize our lives, achieving unprecedented computational powers and unlocking new possibilities in drug discovery, chemical simulations and cryptography. The fundamental unit of computation of a quantum computer is the quantum bit (qubit). It can be implemented in a number of technologies, such as superconducting qubits, spin qubits, photonic systems, trapped ions and NV-centers. Solid-state superconducting qubits and spin qubits seem to be the most promising ones, as shown by the recent demonstration of quantum supremacy with a superconducting qubit processor. Such quantum processors, to operate in the quantum regime, require very low temperatures around 10 mK, and they are hence kept inside dilution fridges. The electronics required to read out and control such processors is typically realized by discrete components or bulky scientific instruments at room temperature wired into the dilution fridge. Such approach is only feasible until few (< 100) qubits are handled, but it is not scalable for million-qubit processors required for fault-tolerant operation. In this thesis, readout and control electronics is proposed to be integrated and operated directly at cryogenic temperatures, in close proximity with the qubits and potentially even co-integrated. CMOS technology is advocated for its scalability, compactness and low prototyping cost, to create a comprehensive cryo-CMOS class of fully-integrated transceivers to read out and control solid-state qubits. In particular, the thesis focuses on cryo-CMOS radio-frequency integrated circuits for the readout of silicon quantum computers, looking to integrate the whole readout system, from the quantum layer to the room temperature user interface. Cryogenic CMOS devices are explored first, to lay the foundations of integrated circuit design. The realization of quantum dots in standard CMOS technology is explored as a platform to realize solid-state qubit arrays, demonstrating functionality at 50 mK and good reproducibility. Moreover, the operation of integrated transistors at 50 mK and 4.2 K is explored to understand their basic cryogenic functionality, through characterization and modeling. Then also integrated passives, such as capacitors, inductors and transformers, are studied and modeled at cryogenic temperatures. Then, a fully-integrated readout platform spanning across all the blocks needed for dispersive readout is proposed. A fully-integrated matrix of quantum dots with radio-frequency gate-based readout capabilities is demonstrated along with time- and frequency-multiplexing. This quantum-classical circuit shows all the features for a scalable approach and is the core of the platform following it. A cryogenic CMOS circulator based on a new all-pass filter architecture is demonstrated, to be used as integrated replacement for current bulky counterparts; it allows power reduction, insertion loss and bandwidth enhancement with respect to state-of-the-art integrated circulators. The rest of the front-end is also explored with dedicated test multiplexers, a low noise-amplifier and an oscillator, that are finally merged in a single fully-integrated low-noise receiver with frequency synthesizer operating at 3.5 K for scalable multiplexed readout of silicon qubits. The platform presented in this thesis, across temperature boundaries, carries all the features required for future scalable silicon quantum computing platforms and could therefore form their core.

•Jan 1, 2021•0 citations
Cryogenic CMOS (Cryo-CMOS) ASICs have drawn increasing attention with great potential in scaling down the quantum computing (QC) platform. Recently, several cryoCMOS ASICs have been presented in the literature, including the qubit state readout ASICs [1–4] and state controller ASICs [5–8]. For readout ASICs, the quadrature down conversion architecture is widely adopted, with the power consumption ranging from 20mW [1] to 75mW [2]. Also, significant progress has been made in reducing the power consumption of qubit controllers. The controller in [5] consumes a power of <4 mW/qubit under active control, when controlling a superconducting quantum computing unit cell. Nevertheless, it remains a long-term goal to reduce the power consumption and promote the integration level of readout/controller ASICs, in consideration of the increasing requirement on qubit number and the limited cooling power provided by the dilution refrigerator.
In today's mainstream superconducting quantum computing platforms in a dilution refrigerator, the qubits work at a cryogenic temperature (CT) of a few tens of mK, while the qubit controller hardware works on plates with temperature ranging from a few K to room temperature (RT). The highly-integrated cryo-CMOS qubit controller ASIC that can fully work at 3-4K has been proven to be the most feasible way to scale down the quantum computing system [1–5]. In [1], a pulse modulator is implemented with a limited qubit driving capability, which can only generate fixed length symmetric driving pulse. The controllers in [2], [3] generated the RF driving pulse with a frequency division multiplexing (FDM) mode, with the power dissipation of 192mW/qubit and 46.5mW/qubit, respectively. In [4], a local oscillator (LO) was included to improve the controller integration level, and the chip power consumption was 24.1mW/qubit. An arbitrary waveform generation (AWG) functionality digital design was presented in [5] with a power consumption of 23.1mW/qubit. Nevertheless, with continuously increasing number of qubits to integrate, it remains as one of the major tasks to further reduce the power consumption and size of controller.
Cryogenic CMOS control and readout circuits tightly interfaced with the qubits have emerged as a promising solution for future quantum computers with tens-of-thousands to millions of qubits [1] –[5]. A lownoise cryo-CMOS receiver at 3−4 K3-4 \mathrm{~K}3−4 K integrated tightly with the lowcryogenic quantum processor can relax or even potentially eliminated the need for the HEMT LNA, and keep the whole control loop at cryogenic temperature, hence avoiding any high-speed interconnects to room temperature (Fig. 1). Additionally, wide bandwidths in the receiver enables qubit-multiplexing, where qubits can be frequency multiplexed with a spacing of 10MHz−40MHz10 \mathrm{MHz}-40 \mathrm{MHz}10MHz−40MHz, allowing anywhere from 10’s-100’s of qubits to be packed in to a single readout line with gigahertz-scale bandwidths. A second critical metric is power consumption, since the cooling power available in a typical dilution refrigerator is limited to a few watts at 3−4 K3-4 \mathrm{~K}3−4 K. Therefore, the control and readout circuits should be designed with low power consumption, projected to be <1 mW\lt 1 \mathrm{~mW}<1 mW per qubit (Fig. 1). While there has been initial progress in the design of cryo-CMOS readout systems, a leap forward is required in their overall power consumption to be viable for future quantum systems. In this work, we showcase the design and implementation of the first sub-mWper-qubit cryo-CMOS RX - a wideband, I/Q-downconversion, 4 K4 \mathrm{~K}4 K receiver for qubit readout that achieves >1.9GHz>1.9 \mathrm{GHz}>1.9GHz of IF bandwidth with >50 dB>50 \mathrm{~dB}>50 dB conversion gain and 0.7 dB0.7 \mathrm{~dB}0.7 dB NF while consuming only 17 mW17 \mathrm{~mW}17 mW of power consumption, thanks to various design techniques including near-threshold operation and low-1/f-noise passive mixers, representing 3−5×3-5 \times3−5× lower power consumption than prior works [2]–[3] while achieving similar noise, BW and gain performance. In addition, we demonstrate a real-time qubit read-out measurement by integrating our cryogenic-CMOS receiver with a transmon qubit.
Quantum computing promises exponential speed-up in solving certain complex problems that would be intractable by classical computers. However, thousands or millions of qubits might be required to solve useful problems. High-precision and low-noise electrical signals are required to manipulate and read the state of a qubit and to control qubit-to-qubit interactions. Current systems use room temperature electronics with many coax cables routed to the qubit chip inside a dilution refrigerator. This approach does not scale to large number of qubits, due to form factor, cost, power consumption and thermal load to the fridge. To address this challenge, a cryogenic qubit controller has been proposed [1]. The first integrated implementation of a cryogenic pulse modulator has been presented in [2], demonstrating the capability of manipulating (drive) the state of superconducting qubits. The work in [3] extends the capability of the controller with 3 main features: frequency-multiplexing to reduce the number of RF cables per qubit, an arbitrary I/Q pulse generation for improved control fidelity and a digitally-intensive architecture with integrated instruction set to enable integration in existing quantum control stacks. This work further advances the prior art by integrating the capability of reading the qubit state and generating the voltage pulses required for drive, readout, 2-qubit operations and qubit characterization. The SoC can drive up to 16 spin qubits by frequency multiplexing over a single RF line, read the state of up to 6 qubits simultaneously and control up to 22 gate potentials. The SoC also integrates a μ\muμ-controller for increased flexibility in implementing the control instruction set. The proposed cryogenic controller can replace all the high-speed control electronics used in conventional solutions today, paving the way towards scalable quantum computers.
A fault tolerant scalable quantum computer requires more than 1000 Qubits to perform real time state correction and to improve the Qubit coherence time. The dense wiring connections required between the quantum processor placed at a 100 mK temperature and the room temperature control and readout electronics serve as a limiting factor in this system. Qubit control and readout electronics operating at 4 K temperature, placed closer to a quantum processor inside the dilution refrigerator avoids the dense wiring connections to room temperature electronics, and hence, serve as a potential solution to realize a scalable quantum computer. However, with no CMOS process technology models available at cryogenic temperatures, the design of a fully integrated, ultra-low power Qubit control and readout electronics at a sub-1 mW power consumption proves to be extremely challenging. In recent years, there has been a huge rise in interest among the research communities to understand and solve the device and circuit level challenges at deep cryogenic temperatures. This paper presents an overview of the recently published active and passive device nonidealities, circuit design challenges and solutions, and the future research directions in the Qubit control and readout electronics operating at deep cryogenic temperatures.
This article presents a cryogenic quantum interface chipset at 3.5 K for superconducting transmon qubit operations. The chipset comprises a phase-detection readout and a phase-shifter-based polar-modulation controller with flexible scalability. With the proposed phase-detection readout scheme, a 9-bit time-to-digital converter (TDC)-based state detector is used to read out the qubit state by detecting the phase difference between the stimulus signal and the reflected signal. A low-IF N-path filter-based receiver and a multi-tone transmitter are co-designed to enable frequency-division multiplexing (FDM) dispersive readout of multiple qubits. A phase-shifter-based polar-modulation XY-driver is developed with support for fast phase quantum gate operation and derivative-removal-by-adiabatic-gate (DRAG) pulse generation. The Z-driver is realized using a static digital-to-analog converter (DAC) array and a 10-bit dynamic DAC for power efficiency. Fabricated in a 28-nm bulk CMOS process, the chipset occupies a die area of 4.6 mm2. The readout RX achieves a noise temperature of 40 K with a gain of 45–83 dB and a bandwidth of 1.2 GHz. The readout RX consumes 32% less power than state-of-the-art designs. The measured total readout power for simultaneous detection of two qubits is 12.2 mW, which is the lowest among readouts with a similar integration level. In addition, the controller achieves a spurious-free dynamic range (SFDR) of 49 dB for a 1-GS/s Z-driver and an SNR of 42 dB for a 1-GS/s XY-driver. The XY-driver consumes 4.3 mW per qubit under active control. Verified with practical transmon qubits, the readout fidelity exceeds 92.6%, approaching that of commercial instruments. A Rabi experiment at 5.61/6.36 MHz, a Ramsey experiment at 4.1 MHz, and a T1 experiment at9.98 μ9.98~{\mu }9.98 μs are also successfully observed using the proposed chipset at 3.5 K.
Quantum computing promises to revolutionize our lives, achieving unprecedented computational powers and unlocking new possibilities in drug discovery, chemical simulations and cryptography. The fundamental unit of computation of a quantum computer is the quantum bit (qubit). It can be implemented in a number of technologies, such as superconducting qubits, spin qubits, photonic systems, trapped ions and NV-centers. Solid-state superconducting qubits and spin qubits seem to be the most promising ones, as shown by the recent demonstration of quantum supremacy with a superconducting qubit processor. Such quantum processors, to operate in the quantum regime, require very low temperatures around 10 mK, and they are hence kept inside dilution fridges. The electronics required to read out and control such processors is typically realized by discrete components or bulky scientific instruments at room temperature wired into the dilution fridge. Such approach is only feasible until few (< 100) qubits are handled, but it is not scalable for million-qubit processors required for fault-tolerant operation. In this thesis, readout and control electronics is proposed to be integrated and operated directly at cryogenic temperatures, in close proximity with the qubits and potentially even co-integrated. CMOS technology is advocated for its scalability, compactness and low prototyping cost, to create a comprehensive cryo-CMOS class of fully-integrated transceivers to read out and control solid-state qubits. In particular, the thesis focuses on cryo-CMOS radio-frequency integrated circuits for the readout of silicon quantum computers, looking to integrate the whole readout system, from the quantum layer to the room temperature user interface. Cryogenic CMOS devices are explored first, to lay the foundations of integrated circuit design. The realization of quantum dots in standard CMOS technology is explored as a platform to realize solid-state qubit arrays, demonstrating functionality at 50 mK and good reproducibility. Moreover, the operation of integrated transistors at 50 mK and 4.2 K is explored to understand their basic cryogenic functionality, through characterization and modeling. Then also integrated passives, such as capacitors, inductors and transformers, are studied and modeled at cryogenic temperatures. Then, a fully-integrated readout platform spanning across all the blocks needed for dispersive readout is proposed. A fully-integrated matrix of quantum dots with radio-frequency gate-based readout capabilities is demonstrated along with time- and frequency-multiplexing. This quantum-classical circuit shows all the features for a scalable approach and is the core of the platform following it. A cryogenic CMOS circulator based on a new all-pass filter architecture is demonstrated, to be used as integrated replacement for current bulky counterparts; it allows power reduction, insertion loss and bandwidth enhancement with respect to state-of-the-art integrated circulators. The rest of the front-end is also explored with dedicated test multiplexers, a low noise-amplifier and an oscillator, that are finally merged in a single fully-integrated low-noise receiver with frequency synthesizer operating at 3.5 K for scalable multiplexed readout of silicon qubits. The platform presented in this thesis, across temperature boundaries, carries all the features required for future scalable silicon quantum computing platforms and could therefore form their core.