Abstract Micromachined vapor cells have revolutionized chip-scale quantum sensors, including magnetometers and atomic clocks. In parallel, Rydberg-atom quantum sensing has emerged as a powerful platform for broadband, non-invasive and ultra-sensitive electrometry, enabling compact atom-based antenna elements for electromagnetic reception, often referred to as quantum antennas. Yet, to date, Rydberg sensing has largely been limited to glass-blown, cm-scale vapor cells. Here, we perform Rydberg spectroscopy and electrometry using a wafer-scale-fabricated Pyrex–Si–Pyrex cell with millimeter-scale dimensions. The Rydberg spectroscopic line is characterized with respect to critical parameters such as temperature, the frequency and amplitude of the applied radio frequency (RF) field, light intensity, and the spatial position of the interrogating beam. Our study reveals lineshapes directly influenced by a complex landscape of electrostatic fields with values up to approximately 0.6 V cm − 1 . By controlling key parameters, we were able to reduce the effect of these internal electric fields, and demonstrate the detection of RF fields assessed using the Autler–Townes splitting with a minimum detectable field of 20 μ V cm − 1 . Our results highlight the potential of micromachined vapor cells for subwavelength electromagnetic field measurements, with applications in communications, near-field RF imaging, and chip-scale quantum technologies.
Abstract Micromachined vapor cells have revolutionized chip-scale quantum sensors, including magnetometers and atomic clocks. In parallel, Rydberg-atom quantum sensing has emerged as a powerful platform for broadband, non-invasive and ultra-sensitive electrometry, enabling compact atom-based antenna elements for electromagnetic reception, often referred to as quantum antennas. Yet, to date, Rydberg sensing has largely been limited to glass-blown, cm-scale vapor cells. Here, we perform Rydberg spectroscopy and electrometry using a wafer-scale-fabricated Pyrex–Si–Pyrex cell with millimeter-scale dimensions. The Rydberg spectroscopic line is characterized with respect to critical parameters such as temperature, the frequency and amplitude of the applied radio frequency (RF) field, light intensity, and the spatial position of the interrogating beam. Our study reveals lineshapes directly influenced by a complex landscape of electrostatic fields with values up to approximately 0.6 V cm − 1 . By controlling key parameters, we were able to reduce the effect of these internal electric fields, and demonstrate the detection of RF fields assessed using the Autler–Townes splitting with a minimum detectable field of 20 μ V cm − 1 . Our results highlight the potential of micromachined vapor cells for subwavelength electromagnetic field measurements, with applications in communications, near-field RF imaging, and chip-scale quantum technologies.
Rydberg-atom electrometry, as an emerging cutting-edge technology, features high sensitivity, broad bandwidth, calibration-free operation, and beyond. However, until now the key atomic vapor cells used for confining electric field-sensitive Rydberg atoms nearly made with traditional glass-blown techniques, hindering the miniaturization, integration, and batch manufacturing. Here, we present the wafer-level MEMS atomic vapor cells with glass-silicon-glass sandwiched structure that are batch-manufactured for both frequency stability and electric field measurement. We use specially customized ultra-thick silicon wafers with a resistivity exceeding 10,000 Ω cm, three orders of magnitude higher than that of typical silicon, and a thickness of 6 mm, providing a 4-fold improvement in optical interrogation length. With the as-developed MEMS atomic vapor cell, we configured a high-sensitivity Rydberg-atom electrometry with the minimal detectable microwave field to be 2.8 mV/cm. This combination of miniaturization and sensitivity represents a significant advance in the state-of-the-art field of Rydberg-atom electrometry, paving the way for chip-scale Rydberg-atom electrometry and potentially opening up new applications in a wider variety of fields.
We present a numerical investigation of microfabricated all-glass vapor cell architectures compatible with wafer-level fabrication, in which guided-mode coupling is used to enhance radio-frequency (RF) electric fields for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant “open” cells and periodically structured “supported” cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. While previous efforts to improve sensor sensitivity have largely relied on external metamaterial lenses or bulky horn antennas, our findings demonstrate that pronounced RF field enhancement can arise intrinsically from the glass vapor-cell geometry itself. By establishing vapor-cell engineering as a predictive route for sensitivity enhancement, we show that these engineered grating resonances naturally occur at frequencies aligned with standard Rubidium and Cesium Rydberg transitions (e.g., n ≈ 40 for 65 to 70 GHz and n ≈ 30 for 100 to 115 GHz). This provides the quantum sensing community with a readily accessible approach to boost field sensitivities and engineer incident-angle selectivity directly into chip-scale electrometers.
Abstract Millimeter-scale atomic vapor cells can be accurately and economically batch-fabricated by anodically bonding silicon and glass wafers, enabling the manufacturing of miniature atomic clocks and quantum sensors. However, silicon’s high dielectric constant and conductive losses at millimeter wave frequencies limit its suitability for Rydberg-atom electrometry, which enables highly sensitive electric-field measurements by exploiting the extreme polarizability of Rydberg states in alkali atoms. To address this, we present an all-glass wafer-level microfabrication process that eliminates silicon, creating hermetically sealed vapor cells that are stable over long timelines with embedded cesium dispensers. Femtosecond laser machining precisely defines the cell geometry, and laser-activated alkali loading ensures reliable filling. We demonstrate long-term vacuum stability and robust Rydberg excitation through electromagnetically induced transparency measurements. We then use these cells to measure a 34 GHz millimeter wave field resonant with the 58D5/2→60P3/2 58 D 5 / 2 → 60 P 3 / 2 transition using Autler-Townes splitting and observe the expected linear dependence with field strength. This work demonstrates that the all-glass bonding approach offers a highly durable low-loss cell alternative for miniaturized millimeter wave and microwave quantum sensing, with the potential to flexibly incorporate a range of other dielectric and semiconductor materials and integrate with photonic and electronic technologies.
Rydberg atoms are neutral atoms excited to high principal quantum number states, which endows them with exaggerated properties such as large electric dipole moments, long lifetimes, and extreme sensitivity to external electromagnetic fields. These characteristics form the foundation of Rydberg atom-based sensors, an emerging class of quantum devices capable of optically detecting electric fields across frequencies from DC to the terahertz regime. Rydberg-based electrometry operates through both Autler–Townes (AT) splitting of resonant Rydberg transitions and Stark-shift measurements for high-frequency or far-detuned fields, enabling broadband field sensing from DC to the THz regime. Using ladder-type electromagnetically induced transparency (EIT) and AT splitting, these sensors enable non-invasive, SI-traceable measurements of field amplitude, frequency, phase, and polarization. Recent developments have demonstrated broadband electric field probes, voltage calibration standards, and compact RF receivers based on thermal vapor cells and integrated photonic architectures. Furthermore, innovations in multi-photon EIT, superheterodyne readout, and multi wave mixing have expanded the dynamic range and bandwidth of Rydberg-based electrometry. Despite challenges related to environmental perturbations, linewidth broadening, and laser stabilization, ongoing advances in atomic control, hybrid photonic integration, and EIT-based readout promise scalable, chip-compatible sensors. This review summarizes the physical principles, experimental progress, and emerging applications of Rydberg atom-based sensing, emphasizing their potential for next generation quantum metrology, wireless communication, and precision field mapping.
We describe experiments relevant to Rydberg atom-based sensing. In Rydberg atom-based sensing, atoms contained in a vapor cell are used as a probe of an incident radio frequency electric field. We present a novel approach based on a collinear three-photon read-out and detection scheme, which extends the sensing range of the self-calibrated Autler-Townes sensing mode to lower electric field strengths. We demonstrate proof of concept and present concrete results from first experiments. We show that we are able to measure electric field strengths below 1 mV/cm in the self-calibrated Autler-Townes regime for a radial dipole moment of 2206 ea0for a transition at 10.7 GHz. We measure an Autler-Townes splitting of 503(6) kHz, which is equivalent to a radio frequency electric field strength of micro-V/cm.
We present a comprehensive numerical investigation into the radio frequency (RF) field behavior within miniaturized all-glass and hybrid vapor cell geometries designed for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant "open" cells and periodically structured "supported" cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle- and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. Our findings open new possibilities for optimizing vapor cell architectures to enhance field sensitivity, directional and polarization selectivity, and integration potential in chip-scale quantum sensing platforms based on Rydberg atoms.