Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Room-temperature quantum devices: innovations in active pre-cooling protocol, spin-phonon coupling devices, and stable molecular spins

Kuan-Cheng Chen

Published Nov 4, 2024• 0 citations
Publisher

Abstract

The feasibility of active pre-cooling (APC) by temporarily over-coupling microwave cavity modes to a low-noise amplifier acting as an active cold load was demonstrated, offering an effective method to reduce thermal photon occupancy without cryogenic cooling. The potential of the organic radical BDPA as a tunable qubit medium with remarkably long spin-lattice and spin coherence relaxation times was assessed, comparing favorably with state-of-the-art molecular qubit media. A high-quality surface acoustic wave device integrated with pentacene-deposited molecular thin films was developed to achieve heterogeneous optically-detected spin acoustic resonance (HODSAR), enabling efficient zero-field spin control at room temperature via spin-phonon coupling. Through the construction of specialized experimental setups, the effectiveness of these techniques was demonstrated, facilitating pre-cooling of cavity modes, enhancing coherence times in qubit media, and achieving precise spin manipulation. While APC offers advantages over methods like masers and anti-masers, challenges such as the need for fast, low-loss microwave switches remain. The BDPA radicals showed significant promise for spin ensemble, and the SAW-based HODSAR device provides a scalable platform for spin manipulation in quantum technologies.

DOI
10.25560/116927

Related papers

Quartz Mechanical Resonators for Circuit Quantum Acoustics

Emser, Alec L.

Hybrid systems that couple superconducting qubits to mechanical oscillators facilitate quantum control of individual phonons and have the potential to enable compact, highly coherent quantum memories and processors. To date, however, the utility of hybrid quantum acoustic devices has been limited by poor qubit and mechanical coherence times that are far shorter than those exhibited by their unhybridized counterparts. A primary challenge lies in the intrinsic nature of elastic waves in solids: the slow speed of sound results in a dense spectrum of acoustic modes, making it difficult to prevent spontaneous emission of the qubit into phononic degrees of freedom. In this thesis, I will present a systematic effort to suppress loss mechanisms in superconducting qubits and mechanical resonators in the context of circuit quantum acoustics. I begin by demonstrating the use of crystallographic orientation optimization to passively suppress diffraction losses in narrow-aperture quartz surface acoustic wave (SAW) resonators. We then study the coupling of SAW resonators to a quasi-continuum of bulk acoustic modes; this motivates us to abandon bulk piezoelectric media in favor of bandgap-protected thin-film devices. By fabricating suspended phononic crystal resonators from thin-film quartz, we demonstrate an order-of-magnitude improvement in the coherence of this class of devices. I conclude by presenting preliminary measurements of a new flip-chip architecture for circuit quantum acoustics -- the `acoustic trampoline' -- that is designed to maximize qubit-mechanical coupling while simultaneously suppressing spontaneous acoustic emission.

•Apr 17, 2025•0 citations

Towards Quantum Networks with Color Centers in Diamond

Tatsuki Hamamoto

Connecting cryogenic solid-state quantum processors with room-temperature optical links is a key step toward a scalable quantum computer. This thesis presents two technological advancements toward the realization of a spin-ensemble-based quantum transducer using impurity spins in diamond. First, a low-loss dielectric microwave resonator based on rutile (TiO2) was developed, achieving an internal quality factor of Qint ∼ 104 despite incorporating large optical apertures. Second, an optical Fabry–Pérot cavity was stabilized at millikelvin temperatures with sub-0.1 nm root-mean-square cavity length fluctuations, enabling stable cavity locking to the laser in a dilution refrigerator. These components were integrated into a hybrid resonator enabling spatial mode overlap within a diamond sample containing an ensemble of nitrogen-vacancy centers. Measurements at 10 mK revealed spin coherence times of T1 = 1930 s and T2 = 470 µs, and characterized the inhomogeneous broadening of the optical transition. We estimate the current microwave-to-optical conversion efficiency and discuss potential improvements through device and cavity optimization. This work establishes a platform for spin ensemble-based transducers operating at millikelvin temperatures.

•Dec 31, 2025•0 citations

Room-Temperature Solid-State Maser Amplifier

Tom Day, Maya Isarov, William J. Pappas +6 more

Masers once represented the state of the art in low-noise microwave amplification technology but eventually became obsolete due to their need for cryogenic cooling. Masers based on solid-state spin systems perform most effectively as amplifiers, since they provide a large density of spins and can, therefore, operate at relatively high powers. While solid-state maser oscillators have been demonstrated at room temperature, continuous-wave amplification in these systems has only ever been realized at cryogenic temperatures. Here, we report on a continuous-wave solid-state maser amplifier operating at room temperature. We achieve this feat using a practical setup that includes an ensemble of nitrogen-vacancy center spins in a diamond crystal, a strong permanent magnet, and a simple laser diode. We describe important amplifier characteristics including gain, bandwidth, compression power, and noise temperature and discuss the prospects of realizing a room-temperature near-quantum-noise-limited amplifier with this system. Finally, we show that in a different mode of operation the spins can be used to reduce the microwave noise in an external circuit to cryogenic levels, all without the requirement for physical cooling. Published by the American Physical Society 2024

arXiv:2405.07486•Physical Review X•Dec 18, 2024•12 citations

Perspective on room-temperature solid-state masers

Daan M. Arroo, Neil McN. Alford, Jonathan Breeze

The first solid-state masers to operate at room-temperature and ambient air-pressure were recently demonstrated using optically pumped spin-triplet states as the gain medium. In this Perspective, we briefly review the previous state-of-the-art in cryogenic solid-state masers and then discuss the development of the room-temperature solid-state maser: from the organic pentacene pulsed maser to the diamond nitrogen-vacancy continuous-wave maser. We characterize the operation of these masers as coherent microwave sources and ultra-low noise amplifiers before outlining how they can be adapted to act as model systems in which to explore room-temperature cavity quantum electrodynamics. After discussing challenges facing current embodiments of the room-temperature solid-state maser, we explore how they might be addressed or by-passed altogether through the development of alternative materials and masing mechanisms. Finally, we speculate on how the advent of masers that can operate in ambient conditions might lead to novel applications in metrology and quantum technologies.

Applied Physics Letters•Oct 4, 2021•27 citations

Optically Switched Phonon Superradiance of Surface Acoustic Wave in Diamond

Zhiwei Chen, Changyong Lei, Jie Ren

Surface acoustic wave (SAW) phonon coupling with nitrogen-vacancy (NV) center spins in diamond offers a promising platform for on-chip quantum phononic manipulations. Although an ensemble of NV centers coupled to a common SAW phonon mode enables superradiance and collective quantum control, achieving a tunable superradiant phase transition remains challenging. Here, we show that optically driving NV centers level transitions enhances the effective spin-phonon coupling, triggering a SAW phonon superradiant phase transition in the weak-coupling regime. We also demonstrate that above a critical threshold, the driving light rapidly switches on the phonon superradiance--a dynamic effect that persists in finite-number NV ensembles. Our results provide a controllable route to coherent phonon-NV spin manipulation in solid state quantum devices.

cond-mat.mes-hallCross-listedarXiv:2606.28935•Jun 30, 2026

Quantum superconducting circuits for addressing phonons and electronic spins

Audrey Bienfait

Circuit quantum electrodynamics is a currently very active field of research. Since the discoveries that an artificial spin, the so-called qubit, can be implemented using a superconducting non-linear circuit and can coherently interact with the electromagnetic field at the single-photon level, it has gathered strong interest for its potential for quantum computing but also for its ability to create, manipulate and detect microwave states with an exquisite precision. This manuscript describes three experiments harnessing and building on the tools and concepts developed for circuit quantum electrodynamics to couple microwave fields to other fundamental entities, namely phonons and electron spins. In a first experiment, we show the coherent coupling of superconducting to surface acoustic wave phonons. It demonstrates that acoustic waves can be used to carry quantum information and distribute entanglement. We then explore the coupling of superconducting circuits to electronic spins, and its potential for sensing and quantum information storage. The second experiment concentrates at building a high-sensitivity spectrometer able to detect spins in picoliter sized samples, targeting samples from chemical or biological origins. The third experiment is about implementing a quantum memory using a spin ensemble possessing second-long coherence. We namely explore the potential of circuit-enhanced radiation cooling to polarize the spin ensemble and enhance the efficiency of the quantum memory storage.

•Oct 11, 2024•0 citations
The feasibility of active pre-cooling (APC) by temporarily over-coupling microwave cavity modes to a low-noise amplifier acting as an active cold load was demonstrated, offering an effective method to reduce thermal photon occupancy without cryogenic cooling. The potential of the organic radical BDPA as a tunable qubit medium with remarkably long spin-lattice and spin coherence relaxation times was assessed, comparing favorably with state-of-the-art molecular qubit media. A high-quality surface acoustic wave device integrated with pentacene-deposited molecular thin films was developed to achieve heterogeneous optically-detected spin acoustic resonance (HODSAR), enabling efficient zero-field spin control at room temperature via spin-phonon coupling. Through the construction of specialized experimental setups, the effectiveness of these techniques was demonstrated, facilitating pre-cooling of cavity modes, enhancing coherence times in qubit media, and achieving precise spin manipulation. While APC offers advantages over methods like masers and anti-masers, challenges such as the need for fast, low-loss microwave switches remain. The BDPA radicals showed significant promise for spin ensemble, and the SAW-based HODSAR device provides a scalable platform for spin manipulation in quantum technologies.
Hybrid systems that couple superconducting qubits to mechanical oscillators facilitate quantum control of individual phonons and have the potential to enable compact, highly coherent quantum memories and processors. To date, however, the utility of hybrid quantum acoustic devices has been limited by poor qubit and mechanical coherence times that are far shorter than those exhibited by their unhybridized counterparts. A primary challenge lies in the intrinsic nature of elastic waves in solids: the slow speed of sound results in a dense spectrum of acoustic modes, making it difficult to prevent spontaneous emission of the qubit into phononic degrees of freedom. In this thesis, I will present a systematic effort to suppress loss mechanisms in superconducting qubits and mechanical resonators in the context of circuit quantum acoustics. I begin by demonstrating the use of crystallographic orientation optimization to passively suppress diffraction losses in narrow-aperture quartz surface acoustic wave (SAW) resonators. We then study the coupling of SAW resonators to a quasi-continuum of bulk acoustic modes; this motivates us to abandon bulk piezoelectric media in favor of bandgap-protected thin-film devices. By fabricating suspended phononic crystal resonators from thin-film quartz, we demonstrate an order-of-magnitude improvement in the coherence of this class of devices. I conclude by presenting preliminary measurements of a new flip-chip architecture for circuit quantum acoustics -- the `acoustic trampoline' -- that is designed to maximize qubit-mechanical coupling while simultaneously suppressing spontaneous acoustic emission.
Connecting cryogenic solid-state quantum processors with room-temperature optical links is a key step toward a scalable quantum computer. This thesis presents two technological advancements toward the realization of a spin-ensemble-based quantum transducer using impurity spins in diamond. First, a low-loss dielectric microwave resonator based on rutile (TiO2) was developed, achieving an internal quality factor of Qint ∼ 104 despite incorporating large optical apertures. Second, an optical Fabry–Pérot cavity was stabilized at millikelvin temperatures with sub-0.1 nm root-mean-square cavity length fluctuations, enabling stable cavity locking to the laser in a dilution refrigerator. These components were integrated into a hybrid resonator enabling spatial mode overlap within a diamond sample containing an ensemble of nitrogen-vacancy centers. Measurements at 10 mK revealed spin coherence times of T1 = 1930 s and T2 = 470 µs, and characterized the inhomogeneous broadening of the optical transition. We estimate the current microwave-to-optical conversion efficiency and discuss potential improvements through device and cavity optimization. This work establishes a platform for spin ensemble-based transducers operating at millikelvin temperatures.
Masers once represented the state of the art in low-noise microwave amplification technology but eventually became obsolete due to their need for cryogenic cooling. Masers based on solid-state spin systems perform most effectively as amplifiers, since they provide a large density of spins and can, therefore, operate at relatively high powers. While solid-state maser oscillators have been demonstrated at room temperature, continuous-wave amplification in these systems has only ever been realized at cryogenic temperatures. Here, we report on a continuous-wave solid-state maser amplifier operating at room temperature. We achieve this feat using a practical setup that includes an ensemble of nitrogen-vacancy center spins in a diamond crystal, a strong permanent magnet, and a simple laser diode. We describe important amplifier characteristics including gain, bandwidth, compression power, and noise temperature and discuss the prospects of realizing a room-temperature near-quantum-noise-limited amplifier with this system. Finally, we show that in a different mode of operation the spins can be used to reduce the microwave noise in an external circuit to cryogenic levels, all without the requirement for physical cooling. Published by the American Physical Society 2024
The first solid-state masers to operate at room-temperature and ambient air-pressure were recently demonstrated using optically pumped spin-triplet states as the gain medium. In this Perspective, we briefly review the previous state-of-the-art in cryogenic solid-state masers and then discuss the development of the room-temperature solid-state maser: from the organic pentacene pulsed maser to the diamond nitrogen-vacancy continuous-wave maser. We characterize the operation of these masers as coherent microwave sources and ultra-low noise amplifiers before outlining how they can be adapted to act as model systems in which to explore room-temperature cavity quantum electrodynamics. After discussing challenges facing current embodiments of the room-temperature solid-state maser, we explore how they might be addressed or by-passed altogether through the development of alternative materials and masing mechanisms. Finally, we speculate on how the advent of masers that can operate in ambient conditions might lead to novel applications in metrology and quantum technologies.
Surface acoustic wave (SAW) phonon coupling with nitrogen-vacancy (NV) center spins in diamond offers a promising platform for on-chip quantum phononic manipulations. Although an ensemble of NV centers coupled to a common SAW phonon mode enables superradiance and collective quantum control, achieving a tunable superradiant phase transition remains challenging. Here, we show that optically driving NV centers level transitions enhances the effective spin-phonon coupling, triggering a SAW phonon superradiant phase transition in the weak-coupling regime. We also demonstrate that above a critical threshold, the driving light rapidly switches on the phonon superradiance--a dynamic effect that persists in finite-number NV ensembles. Our results provide a controllable route to coherent phonon-NV spin manipulation in solid state quantum devices.
Circuit quantum electrodynamics is a currently very active field of research. Since the discoveries that an artificial spin, the so-called qubit, can be implemented using a superconducting non-linear circuit and can coherently interact with the electromagnetic field at the single-photon level, it has gathered strong interest for its potential for quantum computing but also for its ability to create, manipulate and detect microwave states with an exquisite precision. This manuscript describes three experiments harnessing and building on the tools and concepts developed for circuit quantum electrodynamics to couple microwave fields to other fundamental entities, namely phonons and electron spins. In a first experiment, we show the coherent coupling of superconducting to surface acoustic wave phonons. It demonstrates that acoustic waves can be used to carry quantum information and distribute entanglement. We then explore the coupling of superconducting circuits to electronic spins, and its potential for sensing and quantum information storage. The second experiment concentrates at building a high-sensitivity spectrometer able to detect spins in picoliter sized samples, targeting samples from chemical or biological origins. The third experiment is about implementing a quantum memory using a spin ensemble possessing second-long coherence. We namely explore the potential of circuit-enhanced radiation cooling to polarize the spin ensemble and enhance the efficiency of the quantum memory storage.