Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quartz Mechanical Resonators for Circuit Quantum Acoustics

Emser, Alec L.

Published Apr 17, 2025• 0 citations
OpenAlex

Abstract

Hybrid systems that couple superconducting qubits to mechanical oscillators facilitate quantum control of individual phonons and have the potential to enable compact, highly coherent quantum memories and processors. To date, however, the utility of hybrid quantum acoustic devices has been limited by poor qubit and mechanical coherence times that are far shorter than those exhibited by their unhybridized counterparts. A primary challenge lies in the intrinsic nature of elastic waves in solids: the slow speed of sound results in a dense spectrum of acoustic modes, making it difficult to prevent spontaneous emission of the qubit into phononic degrees of freedom. In this thesis, I will present a systematic effort to suppress loss mechanisms in superconducting qubits and mechanical resonators in the context of circuit quantum acoustics. I begin by demonstrating the use of crystallographic orientation optimization to passively suppress diffraction losses in narrow-aperture quartz surface acoustic wave (SAW) resonators. We then study the coupling of SAW resonators to a quasi-continuum of bulk acoustic modes; this motivates us to abandon bulk piezoelectric media in favor of bandgap-protected thin-film devices. By fabricating suspended phononic crystal resonators from thin-film quartz, we demonstrate an order-of-magnitude improvement in the coherence of this class of devices. I conclude by presenting preliminary measurements of a new flip-chip architecture for circuit quantum acoustics -- the `acoustic trampoline' -- that is designed to maximize qubit-mechanical coupling while simultaneously suppressing spontaneous acoustic emission.

Related papers

Quartz phononic crystal resonators for hybrid acoustic quantum memories

Yang Hu, Angad Gupta, Jacob Repicky +2 more

Circuit quantum acoustodynamics systems have emerged as a promising platform for quantum information by coupling superconducting qubits to mechanical resonators, with their long-lived mechanical modes serving as quantum memories. We demonstrate suspended quartz phononic crystal resonators at 100 MHz with millisecond lifetimes at 8 K. With a contactless electrode geometry suppressing both two-level system losses and other electrode-induced energy dissipation, we evaluate the piezoelectric coupling rate between the mechanical modes and fluxonium qubits (resonant coupling) and transmon qubits (parametric coupling mediated by a Josephon-junction-based three-wave mixer). We further discuss multi-period defect geometries for enhancing these coupling rates.

arXiv:2509.07900•Sep 9, 2025•1 citation

Loss Mechanisms in High-coherence Multimode Mechanical Resonators Coupled to Superconducting Circuits

Raquel Garcia Belles, Alexander Anferov, Lukas F. Deeg +14 more

Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 $μ$s and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of $C_{T_2}=1.1\times10^5$. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.

quant-pharXiv:2602.22117•PRX Quantum•Feb 26, 2026•8 citations

Quantum acoustics with superconducting circuits

Gustav Andersson

The past 20 years has seen rapid developments in circuit quantum electrodynamics, where superconducting qubits and resonators are used to control and study quantum light-matter interaction at a fundamental level. The development of this field is strongly influenced by quantum information science and the prospect of realizing quantum computation, but also opens up opportunities for combinations of different physical systems and research areas. Superconducting circuits in the microwave domain offer a versatile platform for interfacing with other quantum systems thanks to strong nonlinearities and zero-point fluctuations, as well as flexibility in design and fabrication. Hybrid quantum systems based on circuit quantum electrodynamics could enable novel functionalities by exploiting the strengths of the individual components.This thesis covers experiments coupling superconducting circuits to surface acoustic waves (SAWs), mechanical waves propagating along the surface of a solid. Strong coupling can be engineered using the piezoelectric properties of GaAs substrates, and our experiments exploit this to investigate phenomena in quantum field-matter interaction. A key property of surface acoustic waves is the slow propagation speed, typically five orders of magnitude slower than light in vacuum, and the associated short wavelength. This enables the giant atom regime where the artificial atom in the form of a superconducting circuit is large compared to the wavelength of interacting SAW radiation, a condition which is difficult to realize in other systems. Experiments described in this thesis use these properties to demonstrate electromagnetically induced transparency for a mechanical mode, as well as non-Markovian interactions between an artificial giant atom and the SAW field. When the SAW field is confined to a resonant cavity, the short wavelength allows multimode spectra suitable for interacting with a frequency comb. We use a multimode SAW resonator to characterize the ensemble of microscopic two-level system defects with a two-tone spectroscopy approach. Finally, we introduce a hybrid superconducting-SAW resonator with applications in quantum information processing in mind. Experiments with this device demonstrate entanglement of SAW modes, and show promising results on the way to engineer cluster states for quantum computation in continuous variables.

•Jan 1, 2020•0 citations

Piezosähköiset värähtelijät kvanttialueella

Välimaa, Alpo

Acoustic modes—in the form of collective vibrations trapped between the parallel and polished surfaces of a crystalline cavity—provide an intriguing opportunity for probing the quantum-mechanical regime of macroscopical mechanical resonators. Moreover, the exceptional quality factors in a compact size from mm to μm motivate the integration of acoustic resonators into quantum circuits to explore the applications of a quantum hybrid system.While the acoustic modes of a crystal are commonly isolated from electrical dynamics, piezoelectricityis employed to transduce energy between the two domains. In the first part of this thesis, we investigate the means to improve the quality factor of a low frequency plano-convex monolithic quartz resonator. The resonator is 7mm indiameter and 250 μm in thickness, made only of only piezoelectric crystalline material. By the removal of clamping losses and incorporating a distant non-contact measurement setup,we demonstrate quality factors as high as 108 at cryogenic temperatures close to the quantumground state. Additionally, we model the electromechanical clamping losses of a particular grounding setup using temperature-dependent data and the acoustic transmission line based Mason’s model. In the latter part of this thesis, we couple a bulk acoustic high-overtone resonator (HBAR) with a transmon qubit. The electrical actuation of GHz-frequency sound in a HBAR is based on a μm-thin piezo film grown on a low-loss crystalline non-piezo bulk substrate. With an analogy to an acoustic musical instrument, the driven oscillations are amplified at the resonant frequencies of the acoustic cavity, with the addition that a small subset of such modes are selectively listened by the qubit. By the introduction of the acoustic overtones, high quality factors are accessible at the high frequencies of a transmon qubit,while the coupling between the two systems is distributed over the multitude of modes. I model this coupling in detail with respect to the system parameters for guiding the design of related quantum acoustic devices. I cover several different parameter regimes and explore the rich physics taking place in the multimodal hybrid system: Landau-Zener Stuckelberg interference, photon assisted sideband transitions and parametrically modulated coupling that involve the resonant periodical exchange of energy quanta known as vacuum Rabi oscillations, and drive-dependent multiphonon transitions. Despite the otherwise common difficulty to observe quantum mechanics in a harmonic oscillator, we observe purely quantum mechanical effects in the macroscopic resonator, such as a specific square root dependence of the transition energies on the quantum number.

•Jan 1, 2022•10 citations

Interfacing planar superconducting qubits with high overtone bulk acoustic phonons

Mikael Kervinen, Ilkka Rissanen, Mika A. Sillanpää

Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.

arXiv:1802.06642•Physical review. B./Physical review. B•May 29, 2018•46 citations

Thin film aluminum nitride surface acoustic wave resonators for quantum acoustodynamics

Wenbing Jiang, Junfeng Chen, Xiaoyu Liu +5 more

Quantum excitations of macroscopic surface acoustic waves (SAWs) have been tailored to control, communicate, and transduce stationary and flying quantum states. However, the limited lifetime of these hybrid quantum systems remains critical obstacles to extend their applications in quantum information processing. Here, we present potentials of thin film aluminum nitride to on-chip integrated phonons with superconducting qubits over previous bulk piezoelectric substrates. We have reported high-quality thin film GHz-SAW resonators with the highest internal quality factor Qi of 4.92×104 in the quantum regime. The internal losses of SAW resonators are systematically investigated by tuning the parameters of sample layout, power, and temperature. Our results manifest that SAWs on piezoelectric films are readily integrated with standard fabrication of Josephson junction quantum circuits and offer excellent acoustic platforms for high-coherence quantum acoustodynamics architectures.

arXiv:2304.00511•Applied Physics Letters•Jul 10, 2023•13 citations
Hybrid systems that couple superconducting qubits to mechanical oscillators facilitate quantum control of individual phonons and have the potential to enable compact, highly coherent quantum memories and processors. To date, however, the utility of hybrid quantum acoustic devices has been limited by poor qubit and mechanical coherence times that are far shorter than those exhibited by their unhybridized counterparts. A primary challenge lies in the intrinsic nature of elastic waves in solids: the slow speed of sound results in a dense spectrum of acoustic modes, making it difficult to prevent spontaneous emission of the qubit into phononic degrees of freedom. In this thesis, I will present a systematic effort to suppress loss mechanisms in superconducting qubits and mechanical resonators in the context of circuit quantum acoustics. I begin by demonstrating the use of crystallographic orientation optimization to passively suppress diffraction losses in narrow-aperture quartz surface acoustic wave (SAW) resonators. We then study the coupling of SAW resonators to a quasi-continuum of bulk acoustic modes; this motivates us to abandon bulk piezoelectric media in favor of bandgap-protected thin-film devices. By fabricating suspended phononic crystal resonators from thin-film quartz, we demonstrate an order-of-magnitude improvement in the coherence of this class of devices. I conclude by presenting preliminary measurements of a new flip-chip architecture for circuit quantum acoustics -- the `acoustic trampoline' -- that is designed to maximize qubit-mechanical coupling while simultaneously suppressing spontaneous acoustic emission.
Circuit quantum acoustodynamics systems have emerged as a promising platform for quantum information by coupling superconducting qubits to mechanical resonators, with their long-lived mechanical modes serving as quantum memories. We demonstrate suspended quartz phononic crystal resonators at 100 MHz with millisecond lifetimes at 8 K. With a contactless electrode geometry suppressing both two-level system losses and other electrode-induced energy dissipation, we evaluate the piezoelectric coupling rate between the mechanical modes and fluxonium qubits (resonant coupling) and transmon qubits (parametric coupling mediated by a Josephon-junction-based three-wave mixer). We further discuss multi-period defect geometries for enhancing these coupling rates.
Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 μμμs and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of CT2=1.1×105C_{T_2}=1.1\times10^5CT2​​=1.1×105. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.
The past 20 years has seen rapid developments in circuit quantum electrodynamics, where superconducting qubits and resonators are used to control and study quantum light-matter interaction at a fundamental level. The development of this field is strongly influenced by quantum information science and the prospect of realizing quantum computation, but also opens up opportunities for combinations of different physical systems and research areas. Superconducting circuits in the microwave domain offer a versatile platform for interfacing with other quantum systems thanks to strong nonlinearities and zero-point fluctuations, as well as flexibility in design and fabrication. Hybrid quantum systems based on circuit quantum electrodynamics could enable novel functionalities by exploiting the strengths of the individual components.This thesis covers experiments coupling superconducting circuits to surface acoustic waves (SAWs), mechanical waves propagating along the surface of a solid. Strong coupling can be engineered using the piezoelectric properties of GaAs substrates, and our experiments exploit this to investigate phenomena in quantum field-matter interaction. A key property of surface acoustic waves is the slow propagation speed, typically five orders of magnitude slower than light in vacuum, and the associated short wavelength. This enables the giant atom regime where the artificial atom in the form of a superconducting circuit is large compared to the wavelength of interacting SAW radiation, a condition which is difficult to realize in other systems. Experiments described in this thesis use these properties to demonstrate electromagnetically induced transparency for a mechanical mode, as well as non-Markovian interactions between an artificial giant atom and the SAW field. When the SAW field is confined to a resonant cavity, the short wavelength allows multimode spectra suitable for interacting with a frequency comb. We use a multimode SAW resonator to characterize the ensemble of microscopic two-level system defects with a two-tone spectroscopy approach. Finally, we introduce a hybrid superconducting-SAW resonator with applications in quantum information processing in mind. Experiments with this device demonstrate entanglement of SAW modes, and show promising results on the way to engineer cluster states for quantum computation in continuous variables.
Acoustic modes—in the form of collective vibrations trapped between the parallel and polished surfaces of a crystalline cavity—provide an intriguing opportunity for probing the quantum-mechanical regime of macroscopical mechanical resonators. Moreover, the exceptional quality factors in a compact size from mm to μm motivate the integration of acoustic resonators into quantum circuits to explore the applications of a quantum hybrid system.While the acoustic modes of a crystal are commonly isolated from electrical dynamics, piezoelectricityis employed to transduce energy between the two domains. In the first part of this thesis, we investigate the means to improve the quality factor of a low frequency plano-convex monolithic quartz resonator. The resonator is 7mm indiameter and 250 μm in thickness, made only of only piezoelectric crystalline material. By the removal of clamping losses and incorporating a distant non-contact measurement setup,we demonstrate quality factors as high as 108 at cryogenic temperatures close to the quantumground state. Additionally, we model the electromechanical clamping losses of a particular grounding setup using temperature-dependent data and the acoustic transmission line based Mason’s model. In the latter part of this thesis, we couple a bulk acoustic high-overtone resonator (HBAR) with a transmon qubit. The electrical actuation of GHz-frequency sound in a HBAR is based on a μm-thin piezo film grown on a low-loss crystalline non-piezo bulk substrate. With an analogy to an acoustic musical instrument, the driven oscillations are amplified at the resonant frequencies of the acoustic cavity, with the addition that a small subset of such modes are selectively listened by the qubit. By the introduction of the acoustic overtones, high quality factors are accessible at the high frequencies of a transmon qubit,while the coupling between the two systems is distributed over the multitude of modes. I model this coupling in detail with respect to the system parameters for guiding the design of related quantum acoustic devices. I cover several different parameter regimes and explore the rich physics taking place in the multimodal hybrid system: Landau-Zener Stuckelberg interference, photon assisted sideband transitions and parametrically modulated coupling that involve the resonant periodical exchange of energy quanta known as vacuum Rabi oscillations, and drive-dependent multiphonon transitions. Despite the otherwise common difficulty to observe quantum mechanics in a harmonic oscillator, we observe purely quantum mechanical effects in the macroscopic resonator, such as a specific square root dependence of the transition energies on the quantum number.
Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.
Quantum excitations of macroscopic surface acoustic waves (SAWs) have been tailored to control, communicate, and transduce stationary and flying quantum states. However, the limited lifetime of these hybrid quantum systems remains critical obstacles to extend their applications in quantum information processing. Here, we present potentials of thin film aluminum nitride to on-chip integrated phonons with superconducting qubits over previous bulk piezoelectric substrates. We have reported high-quality thin film GHz-SAW resonators with the highest internal quality factor Qi of 4.92×104 in the quantum regime. The internal losses of SAW resonators are systematically investigated by tuning the parameters of sample layout, power, and temperature. Our results manifest that SAWs on piezoelectric films are readily integrated with standard fabrication of Josephson junction quantum circuits and offer excellent acoustic platforms for high-coherence quantum acoustodynamics architectures.