Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Joint Conference on Neural Networks (IJCNN)

Comparing Simulated versus Hardware Training Data for Learning-Based Quantum Error Mitigation

Seyed Mohamad Ali Tousi, Guilherme N. DeSouza

Published Jun 1, 2026• 0 citations
Publisher

Abstract

Learning-based Quantum Error Mitigation (QEM) has emerged as a promising approach for reducing noise-induced bias on near-term Noisy Intermediate-Scale Quantum (NISQ) hardware. While simulated noise models enable scalable training of learning-based mitigators, real hardware data more accurately reflect device-specific error mechanisms, but are expensive and sparse. Understanding how these two data regimes interact is therefore critical for the practical deployment of learning-based QEM. In this paper, we present a systematic and empirical analysis on the nature of the data (simulated versus hardware noise) for learning-based QEM. Using a recently developed attention-based graph transformer for small- and large-scale quantum error mitigation, we compare various training regimes, starting from exclusively simulated noise and progressively integrating more measurements from real quantum hardware. Our study spans two distinct circuit families: 1) randomly generated circuits with relatively homogeneous structure; and 2) targeted quantum circuits derived from a specific problem, in this case the one-dimensional Burgers’ equation. Across five-fold cross validation, we analyze how hardware data affects generalization performance as measured by mean absolute error (MAE). Our results demonstrate that the impact of hardware data strongly depends on circuit structure and diversity. For random circuits, simulated data already guarantees lower absolute error, while hardware data yields consistent, but moderate improvements. In contrast, for targeted circuits, like the structured Burgers’ circuits, simulated noise can be less representative of the actual (testing) quantum error, and incorporating hardware data produces substantially larger relative reductions in MAE – despite the intrinsically higher MAE. These findings indicate the value of the nature of the training data in learning-based QEM, which is governed not only by the data’s ability to approximate reality – as expected – but also by how difficult it may be to capture circuit-induced error mechanisms in quantum simulations. In general, this work highlights the urgency of quantum circuit coverage in designing scalable and cost-effective learning-based QEM pipelines for devices in this new NISQ-era.

DOI
10.1109/ijcnn69854.2026.11728507

Related papers

Scalable Quantum Error Mitigation with Neighbor-Informed Learning

Zhenyu Chen, Bin Cheng, Minbo Gao +4 more

Noise in quantum hardware is the primary obstacle to realizing the transformative potential of quantum computing. Quantum error mitigation (QEM) offers a promising pathway to enhance computational accuracy on near-term devices, yet existing methods face a difficult trade-off between performance, resource overhead, and theoretical guarantees. In this work, we introduce neighbor-informed learning (NIL), a versatile and scalable QEM framework that unifies and strengthens existing methods such as zero-noise extrapolation (ZNE) and probabilistic error cancellation (PEC), while offering improved flexibility, accuracy, efficiency, and robustness. NIL learns to predict the ideal output of a target quantum circuit from the noisy outputs of its structurally related ``neighbor'' circuits. A key innovation is our 2-design training method, which generates training data for our machine learning model. In contrast to conventional learning-based QEM protocols that create training circuits by replacing non-Clifford gates with uniformly random Clifford gates, our approach achieves higher accuracy and efficiency, as demonstrated by both theoretical analysis and numerical simulation. Furthermore, we prove that the required size of the training set scales only \emph{logarithmically} with the total number of neighbor circuits, enabling NIL to be applied to problems involving large-scale quantum circuits. Our work establishes a theoretically grounded and practically efficient framework for QEM, paving a viable path toward achieving quantum advantage on noisy hardware.

quant-pharXiv:2512.12578•Dec 16, 2025•1 citation

Machine Learning-based Quantum Error Mitigation for Variational Algorithms

Nikita Korolev, Kirill Lakhmanskiy, Daniil Rabinovich

Machine Learning-based quantum error mitigation (ML-QEM) has emerged as a promising approach for improving the performance of noisy quantum algorithms. However, existing ML-QEM methods often have restricted applicability to variational circuits and rely on inaccessible noiseless training data. In this work, we propose a practical ML-QEM protocol tailored to variational quantum algorithms, which generates training data by simulating (near-)Clifford circuits. This data is used for model selection and training, producing a mitigation model that can correct variational circuits with arbitrary parameters and transfer across different target Hamiltonians of similar structure. We benchmark the proposed method on the Variational Quantum Eigensolver (VQE) task for the Sherrington-Kirkpatrick Hamiltonian of up to $n=12$ qubits under various noise models, analyzing its effect on trainability and comparing its performance against standard Zero-Noise Extrapolation (ZNE). The results demonstrate consistent several-fold error suppression across all tested settings and superior performance over ZNE in the high-noise regime, providing evidence for the applicability of the proposed protocol to present-day NISQ processors.

quant-pharXiv:2606.02697•Jun 3, 2026•2 citations

Deep Learning Approaches to Quantum Error Mitigation

Leonardo Placidi, Ifan Williams, Enrico Rinaldi +4 more

We present a systematic investigation of deep learning methods applied to quantum error mitigation of noisy output probability distributions from measured quantum circuits. We compare different architectures, from fully connected neural networks to transformers, and we test different design/training modalities, identifying sequence-to-sequence, attention-based models as the most effective on our datasets. These models consistently produce mitigated distributions that are closer to the ideal outputs when tested on both simulated and real device data obtained from IBM superconducting quantum processing units (QPU) up to five qubits. Across several different circuit depths, our approach outperforms other baseline error mitigation techniques. We perform a series of ablation studies to examine: how different input features (circuit, device properties, noisy output statistics) affect performance; cross-dataset generalization across circuit families; and transfer learning to a different IBM QPU. We observe that generalization performance across similar devices with the same architecture works effectively, without needing to fully retrain models.

quant-pharXiv:2601.14226•Jan 21, 2026•1 citation

Clifford Perturbation Approximation for Quantum Error Mitigation

Zhang, Ruiqi, Yuguo Shao, Fuchuan Wei +3 more

Quantum error mitigation (QEM) is critical for harnessing the potential of near-term quantum devices. Particularly, QEM protocols can be designed based on machine learning, where the mapping between noisy computational outputs and ideal ones can be learned on a training set consisting of Clifford circuits or near-Clifford circuits that contain only a limited number of non-Clifford gates. This learned mapping is then applied to noisy target circuits to estimate the ideal computational output. In this work, we propose a learning-based error mitigation framework called Clifford Perturbation Data Regression (CPDR), which constructs training sets by Clifford circuits with small perturbations. Specifically, these circuits are parameterized quantum circuits, where the rotation angles of the gates are restricted to a narrow range, ensuring that the gates remain close to Clifford gates. This design enables the efficient simulation of the training circuits using the Sparse Pauli Dynamics method. As a result, CPDR is able to utilize training sets with a better diversity to train the model, compared with previous learning-based QEM models that construct training sets with only Clifford or near-Clifford circuits. Numerical simulations on small-scale Ising model circuits demonstrate that the performance of CPDR dramatically outperforms that of existing methods such as Zero-Noise Extrapolation and learning-based Probabilistic Error Cancellation. Furthermore, using the experimental data from IBM's 127-qubit Eagle processor, our findings suggest that CPDR demonstrates improved accuracy compared to the original mitigation results reported in [Nature 618, 500 (2023)].

arXiv:2412.09518•Dec 12, 2024•8 citations

Scalable Quantum Error Mitigation with Physically Informed Graph Neural Networks

Huaxin Wang, Xinge Wu, Jiajun Liu +4 more

Quantum error mitigation (QEM) provides a practical route for estimating reliable observables on noisy intermediate-scale quantum (NISQ) devices. Traditional QEM strategies, including zero-noise extrapolation (ZNE) and Clifford data regression (CDR), rely on noise scaling or global regression, and their performance is constrained by the exponential growth of the system degrees of freedom. We construct a graph-enhanced mitigation (GEM) framework, which incorporates physical information into the model representation. In this work, quantum circuits are encoded as attributed graphs. Hardware-level physical information is mapped to node and edge features: local noise parameters such as calibration parameters $T_1$, $T_2$, and readout errors are encoded at nodes, while coupling-related information such as two-qubit gate errors is encoded as edge features. Graph neural networks are used to model how errors propagate along the physical coupling structure and build up into non-local correlations. This allows the model to capture local interactions and part of the resulting non-local correlations across qubits. A dual-branch affine correction is applied to maintain consistency with physical constraints. Experiments on 10-qubit and 16-qubit random circuits executed on superconducting quantum processors show that GEM provides a level of accuracy comparable to CDR at small scales, while yielding lower mean absolute error and improved stability in zero-shot transfer to larger systems. Results of the traditional QEM strategy indicate that global regression methods remain effective in low-dimensional settings but become less reliable as system degrees of freedom grow. In contrast, GEM makes use of local physical structures to show better scalability and generalization, while preserving the overall error propagation patterns. This work provides a practical scalable approach to QEM for NISQ devices.

quant-pharXiv:2604.16815•Quantum Machine Intelligence•Apr 21, 2026•1 citation

Few-Shot Cross-Device Transfer for Quantum Noise Modeling on Real Hardware

Sahil Al Farib, Sheikh Redwanul Islam, Azizur Rahman Anik

In the noisy intermediate-scale quantum (NISQ) regime, quantum devices contain hardware-specific noise sources which restrict device-invariant error mitigation strategies. We explore transfer learning approaches to apply noise models learned on one quantum device to a different device with the help of a small amount of data. We create a real-hardware dataset from two IBM quantum devices, ibm_fez (source) and ibm_marrakesh (target), comprising 170 noisy and ideal circuit output distributions, with device calibration features added. We train a residual neural network on the source device to map noisy to ideal outcomes. The zero-shot transfer test shows a KL divergence of 1.6706 (up from 0.3014), establishing device specificity. With K = 20 fine-tuning samples, KL drops to 1.1924 (28.6% improvement over zero-shot), recovering 34.9% of the gap between zero-shot and in-domain KL. Ablation studies reveal that the major cause of mismatches across devices is CX gate error, followed by readout error. The results show quantum noise can be learned and fine-tuned with minimal samples, and provide a plausible approach to cross-device quantum error mitigation.

quant-pharXiv:2604.24397•Apr 28, 2026•0 citations
Learning-based Quantum Error Mitigation (QEM) has emerged as a promising approach for reducing noise-induced bias on near-term Noisy Intermediate-Scale Quantum (NISQ) hardware. While simulated noise models enable scalable training of learning-based mitigators, real hardware data more accurately reflect device-specific error mechanisms, but are expensive and sparse. Understanding how these two data regimes interact is therefore critical for the practical deployment of learning-based QEM. In this paper, we present a systematic and empirical analysis on the nature of the data (simulated versus hardware noise) for learning-based QEM. Using a recently developed attention-based graph transformer for small- and large-scale quantum error mitigation, we compare various training regimes, starting from exclusively simulated noise and progressively integrating more measurements from real quantum hardware. Our study spans two distinct circuit families: 1) randomly generated circuits with relatively homogeneous structure; and 2) targeted quantum circuits derived from a specific problem, in this case the one-dimensional Burgers’ equation. Across five-fold cross validation, we analyze how hardware data affects generalization performance as measured by mean absolute error (MAE). Our results demonstrate that the impact of hardware data strongly depends on circuit structure and diversity. For random circuits, simulated data already guarantees lower absolute error, while hardware data yields consistent, but moderate improvements. In contrast, for targeted circuits, like the structured Burgers’ circuits, simulated noise can be less representative of the actual (testing) quantum error, and incorporating hardware data produces substantially larger relative reductions in MAE – despite the intrinsically higher MAE. These findings indicate the value of the nature of the training data in learning-based QEM, which is governed not only by the data’s ability to approximate reality – as expected – but also by how difficult it may be to capture circuit-induced error mechanisms in quantum simulations. In general, this work highlights the urgency of quantum circuit coverage in designing scalable and cost-effective learning-based QEM pipelines for devices in this new NISQ-era.
Noise in quantum hardware is the primary obstacle to realizing the transformative potential of quantum computing. Quantum error mitigation (QEM) offers a promising pathway to enhance computational accuracy on near-term devices, yet existing methods face a difficult trade-off between performance, resource overhead, and theoretical guarantees. In this work, we introduce neighbor-informed learning (NIL), a versatile and scalable QEM framework that unifies and strengthens existing methods such as zero-noise extrapolation (ZNE) and probabilistic error cancellation (PEC), while offering improved flexibility, accuracy, efficiency, and robustness. NIL learns to predict the ideal output of a target quantum circuit from the noisy outputs of its structurally related ``neighbor'' circuits. A key innovation is our 2-design training method, which generates training data for our machine learning model. In contrast to conventional learning-based QEM protocols that create training circuits by replacing non-Clifford gates with uniformly random Clifford gates, our approach achieves higher accuracy and efficiency, as demonstrated by both theoretical analysis and numerical simulation. Furthermore, we prove that the required size of the training set scales only \emph{logarithmically} with the total number of neighbor circuits, enabling NIL to be applied to problems involving large-scale quantum circuits. Our work establishes a theoretically grounded and practically efficient framework for QEM, paving a viable path toward achieving quantum advantage on noisy hardware.
Machine Learning-based quantum error mitigation (ML-QEM) has emerged as a promising approach for improving the performance of noisy quantum algorithms. However, existing ML-QEM methods often have restricted applicability to variational circuits and rely on inaccessible noiseless training data. In this work, we propose a practical ML-QEM protocol tailored to variational quantum algorithms, which generates training data by simulating (near-)Clifford circuits. This data is used for model selection and training, producing a mitigation model that can correct variational circuits with arbitrary parameters and transfer across different target Hamiltonians of similar structure. We benchmark the proposed method on the Variational Quantum Eigensolver (VQE) task for the Sherrington-Kirkpatrick Hamiltonian of up to n=12n=12n=12 qubits under various noise models, analyzing its effect on trainability and comparing its performance against standard Zero-Noise Extrapolation (ZNE). The results demonstrate consistent several-fold error suppression across all tested settings and superior performance over ZNE in the high-noise regime, providing evidence for the applicability of the proposed protocol to present-day NISQ processors.
We present a systematic investigation of deep learning methods applied to quantum error mitigation of noisy output probability distributions from measured quantum circuits. We compare different architectures, from fully connected neural networks to transformers, and we test different design/training modalities, identifying sequence-to-sequence, attention-based models as the most effective on our datasets. These models consistently produce mitigated distributions that are closer to the ideal outputs when tested on both simulated and real device data obtained from IBM superconducting quantum processing units (QPU) up to five qubits. Across several different circuit depths, our approach outperforms other baseline error mitigation techniques. We perform a series of ablation studies to examine: how different input features (circuit, device properties, noisy output statistics) affect performance; cross-dataset generalization across circuit families; and transfer learning to a different IBM QPU. We observe that generalization performance across similar devices with the same architecture works effectively, without needing to fully retrain models.
Quantum error mitigation (QEM) is critical for harnessing the potential of near-term quantum devices. Particularly, QEM protocols can be designed based on machine learning, where the mapping between noisy computational outputs and ideal ones can be learned on a training set consisting of Clifford circuits or near-Clifford circuits that contain only a limited number of non-Clifford gates. This learned mapping is then applied to noisy target circuits to estimate the ideal computational output. In this work, we propose a learning-based error mitigation framework called Clifford Perturbation Data Regression (CPDR), which constructs training sets by Clifford circuits with small perturbations. Specifically, these circuits are parameterized quantum circuits, where the rotation angles of the gates are restricted to a narrow range, ensuring that the gates remain close to Clifford gates. This design enables the efficient simulation of the training circuits using the Sparse Pauli Dynamics method. As a result, CPDR is able to utilize training sets with a better diversity to train the model, compared with previous learning-based QEM models that construct training sets with only Clifford or near-Clifford circuits. Numerical simulations on small-scale Ising model circuits demonstrate that the performance of CPDR dramatically outperforms that of existing methods such as Zero-Noise Extrapolation and learning-based Probabilistic Error Cancellation. Furthermore, using the experimental data from IBM's 127-qubit Eagle processor, our findings suggest that CPDR demonstrates improved accuracy compared to the original mitigation results reported in [Nature 618, 500 (2023)].
Quantum error mitigation (QEM) provides a practical route for estimating reliable observables on noisy intermediate-scale quantum (NISQ) devices. Traditional QEM strategies, including zero-noise extrapolation (ZNE) and Clifford data regression (CDR), rely on noise scaling or global regression, and their performance is constrained by the exponential growth of the system degrees of freedom. We construct a graph-enhanced mitigation (GEM) framework, which incorporates physical information into the model representation. In this work, quantum circuits are encoded as attributed graphs. Hardware-level physical information is mapped to node and edge features: local noise parameters such as calibration parameters T1T_1T1​, T2T_2T2​, and readout errors are encoded at nodes, while coupling-related information such as two-qubit gate errors is encoded as edge features. Graph neural networks are used to model how errors propagate along the physical coupling structure and build up into non-local correlations. This allows the model to capture local interactions and part of the resulting non-local correlations across qubits. A dual-branch affine correction is applied to maintain consistency with physical constraints. Experiments on 10-qubit and 16-qubit random circuits executed on superconducting quantum processors show that GEM provides a level of accuracy comparable to CDR at small scales, while yielding lower mean absolute error and improved stability in zero-shot transfer to larger systems. Results of the traditional QEM strategy indicate that global regression methods remain effective in low-dimensional settings but become less reliable as system degrees of freedom grow. In contrast, GEM makes use of local physical structures to show better scalability and generalization, while preserving the overall error propagation patterns. This work provides a practical scalable approach to QEM for NISQ devices.
In the noisy intermediate-scale quantum (NISQ) regime, quantum devices contain hardware-specific noise sources which restrict device-invariant error mitigation strategies. We explore transfer learning approaches to apply noise models learned on one quantum device to a different device with the help of a small amount of data. We create a real-hardware dataset from two IBM quantum devices, ibm_fez (source) and ibm_marrakesh (target), comprising 170 noisy and ideal circuit output distributions, with device calibration features added. We train a residual neural network on the source device to map noisy to ideal outcomes. The zero-shot transfer test shows a KL divergence of 1.6706 (up from 0.3014), establishing device specificity. With K = 20 fine-tuning samples, KL drops to 1.1924 (28.6% improvement over zero-shot), recovering 34.9% of the gap between zero-shot and in-domain KL. Ablation studies reveal that the major cause of mismatches across devices is CX gate error, followed by readout error. The results show quantum noise can be learned and fine-tuned with minimal samples, and provide a plausible approach to cross-device quantum error mitigation.