Entanglement is the resource that most sharply distinguishes quantum information processing from its classical counterpart, and this thesis examines it from two complementary directions: how it can be detected and quantified, and how it, together with the broader machinery of quantum correlations, interference, and measurement, can be put to use. We first study two simple, measurable conditions that detect bipartite entanglement, and show that the extent to which either is violated yields a lower bound on the negativity of a state. The bound is established for two qubits, extended to systems of arbitrary finite dimension, and sharpened when partial knowledge of the Schmidt vectors is available. We then turn to discrete-outcome quantum sensor networks, in which one seeks only to determine which detectors, or which group or spatial pattern of detectors, has responded to a signal. Working in the weak-interaction regime, where the output states are nonorthogonal, we use minimum-error and unambiguous state discrimination to show that entangled initial states and collective measurements confer an advantage when detectors are grouped, and we develop a shift-operator formalism that gives closed-form success probabilities for the detection of shifted patterns in one- and two-dimensional arrays. Next we consider the problem of learning two unknown pure qubit states, together with their probabilities of occurrence, from a scrambled stream; we show that receiving the systems in identically prepared pairs supplies exactly the extra quantum information needed, since the resulting two-qubit state in the symmetric subspace has a unique decomposition into pure product states, which we recover by tomography. Finally, we show how interference and measurement can convert information encoded in the phases of quantum amplitudes into information encoded in their magnitudes, amplifying the amplitudes that carry useful information and suppressing those that do not, and we apply this technique to states produced by the quantum approximate optimization algorithm for the MaxCut and minimum-vertex-cover problems. Throughout, a single theme recurs: the correlations and superpositions permitted by quantum mechanics are at once something to be measured and something to be exploited.
Entanglement is the resource that most sharply distinguishes quantum information processing from its classical counterpart, and this thesis examines it from two complementary directions: how it can be detected and quantified, and how it, together with the broader machinery of quantum correlations, interference, and measurement, can be put to use. We first study two simple, measurable conditions that detect bipartite entanglement, and show that the extent to which either is violated yields a lower bound on the negativity of a state. The bound is established for two qubits, extended to systems of arbitrary finite dimension, and sharpened when partial knowledge of the Schmidt vectors is available. We then turn to discrete-outcome quantum sensor networks, in which one seeks only to determine which detectors, or which group or spatial pattern of detectors, has responded to a signal. Working in the weak-interaction regime, where the output states are nonorthogonal, we use minimum-error and unambiguous state discrimination to show that entangled initial states and collective measurements confer an advantage when detectors are grouped, and we develop a shift-operator formalism that gives closed-form success probabilities for the detection of shifted patterns in one- and two-dimensional arrays. Next we consider the problem of learning two unknown pure qubit states, together with their probabilities of occurrence, from a scrambled stream; we show that receiving the systems in identically prepared pairs supplies exactly the extra quantum information needed, since the resulting two-qubit state in the symmetric subspace has a unique decomposition into pure product states, which we recover by tomography. Finally, we show how interference and measurement can convert information encoded in the phases of quantum amplitudes into information encoded in their magnitudes, amplifying the amplitudes that carry useful information and suppressing those that do not, and we apply this technique to states produced by the quantum approximate optimization algorithm for the MaxCut and minimum-vertex-cover problems. Throughout, a single theme recurs: the correlations and superpositions permitted by quantum mechanics are at once something to be measured and something to be exploited.
The subject of this thesis, quantum estimation theory, is inspired by recent developments, both practical and theoretical, in the new field of quantum information and computation. The main task of quantum estimation theory, the subject of this thesis, is that given many identical copies of an unknown quantum system one wants to "guess" or estimate what the system is. This is done by performing an "optimal" measurement and analyzing the data obtained from it. A quantum state is represented by a density matrix. In some cases one does not need to know the whole density matrix, sometimes a partial characterization is enough. Chapter 2 of this thesis is about optimally estimating the spectrum, i.e. the eigenvalues, of a density matrix. This is useful, for example, for estimating the entanglement of a bipartite pure state. The results of chapter 2 tell us that one can optimally estimate bipartite entanglement with LOCC measurements on one of the two parties. Unitary operations transform density matrices to density matrices. They are the gates of quantum information processing. Suppose one has one such unitary operation but one does not know what it does. In order to characterize it one needs to know how it transforms any input state. In order to know how a particular state is transformed, one can prepare that state, feed it to the unitary many times, and measure the output. One state is, of course, not enough. It turns out that the unitary can be completely characterized with a finite set of states, this is known as quantum process tomography. Unfortunately, in many cases it is difficult to have available in the lab all the input states needed to perform quantum process tomography. It is here where entanglement comes to the rescue. One pair of maximally entangled qubits, where one of them is used as input for the unitary gate and the other is left untouched, is sufficient. All the information about the unknown gate is contained in the joint output state. This is the problem treated in chapter 3. Now the output state needs to be measured. Again, one could measure the two qubits separately (LOCC) or jointly (collective measurement). Is there anything to gain by performing joint measurements? The answer is yes, optimal collective measurements are at least 3 times more accurate than any LOCC measurement. Chapter 4 treats the problem of estimating commuting unitary gates. There it is shown that this extra information makes it unnecessary to use an entangled input state and to use collective measurements at the output. In chapters 3 and 4 it is assumed that only one copy of the unitary gate is available. If, however, more than one copy (say N ) are available at the same time one could use an N-fold entangled state as input. If no entanglement is used, classical statistics tells us that the error of the estimation is proportional to 1/√N. In the literature, it has been shown that by using an entangled state in the input one can achieve an error proportional to 1/N. However, this has been shown only for qubit gates. In chapter 5 important steps are taken in the direction of showing the same thing for a general unitary gate, but this remains an open problem.
The project concerned the study of quantum correlations (QC) in compound systems, i.e. statistical correlations more general than entanglement which are predicted by quantum mechanics but not described in any classical scenario. I aimed to understand the technical and operational properties of the measures of QC, their interplay with entanglement quantifiers and the experimental accessibility.\nIn the first part of my research path, after having acquired the conceptual and technical rudiments of the project, I provided solutions for some computational issues: I developed analytical and numerical algorithms for calculating bipartite QC in finite dimensional systems. Then, I tackled the problem of the experimental detection of QC. There is no Hermitian operator associated with entanglement measures, nor with QC ones. However, the information encoded in a density matrix is redundant to quantify them, thus the full knowledge of the state is not required to accomplish the task. I reported the first protocol to measure the QC of an unknown state by means of a limited number of measurements, without performing the tomography of the state. My proposal has been implemented experimentally in a NMR (Nuclear Magnetic Resonance) setting.\nIn the final stage of the project, I explored the foundational and operational merits of QC. I showed that the QC shared by two subsystems yield a genuinely quantum kind of uncertainty on single local observables. The result is a promising evidence of the potential exploitability of separable (unentangled) states for quantum metrology in noisy conditions.
Quantum states and measurements are two central physical objects in the theory of quantum mechanics. The preparation, control and measurement of quantum states lies at the heart of modern quantum information processing protocols ranging from secure communication to quantum computation and precision sensing. And yet, the reliable operation of these advanced protocols ultimately rests on a far more essential prerequisite - our ability to calibrate, certify and benchmark the quantum states we prepare and the quantum measurements we perform. Quantum information theory provides a natural framework for these tasks, meaningfully connecting the resources we expend for characterisation with the accuracy and precision we can expect in return. While decades of advances in quantum information have refined our understanding of quantum characterisation and sharpened our practical ability to calibrate with enhanced precision, important questions about the fundamental limits of quantum characterisation remain unanswered. Although incorporating entanglement at the measurement stage is known to enhance the estimation of unknown quantum states, the extent of this improvement remains poorly understood. This leaves open a fundamental question on the utility of complex entangling measurement strategies, impeding progress towards bridging the significant gap between practically achievable precision and the ultimate theoretical quantum limit. Complementary to quantum state estimation, which is relatively well-established in theory and practice, the characterisation of quantum measurements lacks a rigorous information-theoretic foundation, leading to a dearth of principled benchmarks and provably optimal strategies despite growing experimental interest. This thesis develops and applies information-theoretic tools to answer questions in quantum characterisation, with an eye to enabling practical improvements beyond current techniques in the field. First, we introduce a computable measure of entanglement enhancement for quantum state estimation and study its variation across general multi-parameter estimation problems for higher-dimensional quantum states. We show that the entanglement enhancement is maximised for full qudit state tomography but grows only linearly with system dimension even when allowing an asymptotically large number of entangling operations. Our proposed tight upper bound to entanglement enhancement therefore constitutes a strong limitation on the utility of such entangling measurements. Next, we formulate the dual problem of quantum detector estimation, developing a comprehensive framework for maximally precise calibration centred around a newly introduced quantity - the detector quantum Fisher information. This information-theoretic measure stipulates the ultimate precision attainable for measurement calibration and identifies the optimal input states that achieve this precision. Further, our framework enables the first provably optimal detector estimation experiment and reveals the scope for entanglement-based enhancements, thereby placing measurement characterisation on equal footing with state characterisation. Considered together, these results suggest two contrasting conclusions about quantum characterisation. On the one hand, they show that for quantum state estimation, increasingly powerful entangling measurements offer only diminishing returns at the ultimate precision limit. On the other hand, they highlight practical quantum advantages available for detector estimation by providing a framework that can improve calibration performance and guide future experimental design. More broadly, these results complete and advance the triad of state, process, and detector characterisation, positioning quantum information measures as not merely abstract bounds, but practical guides for deciding when complex quantum resources are genuinely worth deploying and where near-term quantum advantages are most likely to be realised.
This thesis investigates questions related with the quantification, creation and application of entanglement. We first show how the notion of entanglement is modified by the presence of superselection rules. Next, we develop protocols for the optimal generation of squeezing and entanglement from noisy operations. The second part of the thesis applies quantum information methods to quantum many-body problems. We start by investigating the relation of Hamiltonian and correlations for lattices of harmonic oscillators. Next, we turn towards the description of many-body systems in terms of Matrix Product States (MPS) and Projected Entangled Pair States (PEPS). We clarify the relation between entropy scaling laws and the approximability by MPS, and determine the computational complexity of creating and simulating PEPS. Finally, we define Gaussian MPS as a generalization of MPS to bosonic systems.
Abstract We study the one-shot reconstruction of a quantum state when a single copy of the source is measured, the outcome is stored in a classical record of fixed finite dimension, and a state is prepared at the destination from the record. This acquisition-limited problem is distinguished from a visible benchmark in which the source label is available to the encoder. For a finite ensemble we derive finite-record bounds on the visible distortion in terms of the cumulative prior mass covered by the record and the optimal discrimination probability, identify the regimes in which they are exact, and solve the two-state visible problem at every record dimension. For pure-state ensembles, exact acquisition-limited reconstruction is possible if and only if the states are perfectly distinguishable, so nonorthogonal targets retain a positive error at every record dimension. For two equiprobable nonorthogonal pure states we derive the optimal trace-distance distortion within the reflection-symmetric two-outcome class in closed variational form and find that unrestricted numerical optimization with up to six outcomes attains the same value; the resulting symmetric value lies strictly below the guess-and-prepare, unambiguous-discrimination, fidelity-optimal, and Haar-random strategies and is realized by one classical bit and one feed-forward rotation. Every classical-record reconstruction is shown to be entanglement breaking, with a quantitative bound on the loss of entanglement with an inaccessible reference, and the record dimension is related to the spectral rank of an energy-constrained memory. These results quantify the separation between a finite classical description and the information obtainable from a single quantum system. MSC Classification: 81P15 , 81P17 , 81P45 , 81P47
Although the concept of quantum entanglement has been known for about seventy years, it only recently quit the realms of meta-theoretical discussions when it was discovered how entanglement can be exploited to compute and communicate with an unprecedented power. The primary motivation of the work presented in this thesis has been to contribute to the big e#ort that has been done during the last decade to understand and quantify quantum entanglement. We have developed advanced techniques of linear and multilinear algebra to investigate and classify entangled pure and mixed quantum states, and discussed some novel applications in the field of quantum information theory. The results presented in this thesis are mainly of interest from a fundamental point a view: entanglement is the characteristic trait of quantum mechanics, the one that enforces its entire departure from classical lines of thought [186]. It is however a real privilege that fundamental research in quantum information theory bears the tools of tomorrow's electrical engineers: the ongoing miniaturization of electronic components will soon reach a scale where quantum mechanical e#ects play a major role.