Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC)

Rydberg Atomic Receiver for Quantum-Enhanced Underwater Wireless Optical Communications

Lahiru Shyamal, Tharindu Udupitiya, Saman Atapattu, Kandeepan Sithamparanathan

Published Sep 1, 2026• 0 citations
Publisher

Abstract

This paper introduces the first Rydberg atomic quantum receiver (RAQR) for underwater wireless optical communications (UWOC). Unlike conventional RF-oriented Rydberg receivers, the proposed architecture exploits direct optical excitation of an atomic transition, enabling a compact threelevel configuration in which the received optical signal and an internally generated local oscillator jointly form the coupling field. The proposed receiver eliminates the dedicated coupling laser required by conventional four-level architectures while providing intrinsic spectral selectivity and strong rejection of ambient optical interference. A comprehensive analytical framework incorporating underwater attenuation, turbulence-induced fading, pointing errors, and angle-of-arrival interruptions is developed. Closed-form expressions for the outage probability, ergodic capacity, and bit error rate are derived, together with a quantum-advantage condition relative to a classical silicon photomultiplier (SiPM) receiver. Numerical results using experimentally demonstrated cesium parameters and representative oceanic channels demonstrate significant SNR and capacity gains over conventional direct-detection UWOC receivers, particularly under severe attenuation.

DOI
10.1109/pimrc69400.2026.11711758

Related papers

Hybrid Six-Level Rydberg Atomic Quantum Receiver for Multi-Band Wireless Communications

Lahiru Shyamal, Harini Hapuarachchi, Saman Atapattu +1 more

Rydberg atomic quantum receivers (RAQRs) have recently emerged as a promising technology for radio-frequency (RF) reception by directly transducing incident RF fields into optical signals. Existing receiver architectures, however, exploit only subsets of the dipole-allowed transitions within a given atomic manifold, limiting the number of simultaneously accessible RF channels. In this paper, a hybrid six-level Rydberg atomic quantum receiver (H-RAQR) is proposed by integrating parallel and cascaded RF coupling pathways within a single vapor-cell receiver. A communication-oriented analytical framework is developed by deriving a closed-form steady-state atom--field interaction model and establishing an equivalent baseband signal representation. The achievable ergodic sum rate is analyzed, and a resource-efficiency metric is introduced to quantify throughput per unit optical receiver resource. The analytical model is validated against full Lindblad master-equation simulations over its identified operating region. Numerical results show that the proposed H-RAQR supports four simultaneous RF channels within a single atomic system, achieves higher ergodic sum rate than conventional parallel Rydberg state (PRS) and cascade Rydberg state (CRS) receivers, and provides about 29% higher resource efficiency than a combined PRS-CRS deployment with equivalent four-band coverage. The proposed framework provides a scalable foundation for multi-band atomic wireless receivers.

quant-pharXiv:2604.12106•Apr 15, 2026•1 citation

BER-Aware Joint Parameter Optimization of Rydberg Atomic Quantum Receivers

Akash Kumar Mandal, Ming Shen

Rydberg-atom quantum receivers (RAQRs) offer highly sensitive RF reception, but their communication performance depends jointly on atomic response, optical transduction, receiver noise, bandwidth, and wireless-channel conditions. This paper develops a BER-aware communication-theoretic framework for superheterodyne RAQR-assisted wireless communication, linking four-level Rydberg-atom dynamics and coherent optical detection to multipath propagation and digital communication performance. Closed-form instantaneous and average SNR and BER expressions are derived for square Gray-coded $M$-QAM over correlated Rayleigh fading. The RAQR operating point is then jointly optimized over atomic, optical, RF, and geometric parameters using analytical block-wise updates within a fixed-point procedure subject to physical and bandwidth constraints. Numerical results demonstrate substantial gains in low-power reception, bandwidth utilization, robustness to detuning, fading and delay spread, outage, and communication coverage compared with conventional, advanced, and fixed-point RAQR receivers. The results demonstrate that BER-aware joint optimization translates the intrinsic sensitivity of Rydberg-atom sensing into tangible communication-level gains.

arXiv:2609.22236•Sep 3, 2026•1 citation

Rydberg Atomic Quantum Receivers for Wireless Communications: Two-Color Versus Three-Color Excitation

Jian Mei Xiao, Tierui Gong, Ji Wang +2 more

An efficient three-color (3C) laser excitation-based Rydberg atomic quantum receiver (RAQR) architecture is investigated for wireless communications, utilizing a five-level (5L) electronic transition mechanism. Specifically, the conventional two-color (2C) RAQR with the four-level (4L) excitation faces three fundamental obstacles: 1) high cost and engineering challenges due to the reliance on unstable short-wavelength lasers; 2) a fundamental sensitivity limit in thermal atoms caused by residual Doppler broadening; and 3) the inability to detect low-frequency bands due to the energy-level constraint of two-photon resonance. To address these challenges, this paper analyzes a 3C5L-RAQR architecture with all-red/infrared lasers, which not only solves the engineering cost issues but also enables effective Doppler cancellation and low-frequency detection by exploiting the three-photon resonance. Bridging atomic physics and communication theory, an end-to-end equivalent baseband signal model is derived. Furthermore, the performance of different RAQR architectures is evaluated in terms of sensitivity, achievable rate and spectrum access range. Moreover, we provide an exact numerical solution for practical RAQRs by employing the Liouvillian superoperator formalism. Numerical results demonstrate that the exhibited 3C5L-RAQR achieves superior sensitivity compared to the conventional 2C4L-RAQR and a classical antenna-based radio frequency receiver for weak-signal detection. Finally, the inherent sensitivity-rate trade-off is revealed, showing that the 3C5L-RAQR is more suitable for deployment in power-limited communication scenarios demanding broad spectrum access.

arXiv:2603.24062•IEEE Journal on Selected Areas in Communications•Jan 1, 2026•4 citations

Rydberg Atomic Quantum Receivers for Classical Wireless Communications and Sensing: Their Models and Performance

Tierui Gong, Jiaming Sun, Chau Yuen +6 more

The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.

arXiv:2412.05554•IEEE Transactions on Communications•Jan 1, 2026•26 citations

Harnessing Rydberg Atomic Receivers: From Quantum Physics to Wireless Communications

Yuanbin Chen, Xufeng Guo, Chau Yuen +5 more

The intrinsic integration of Rydberg atomic receivers into wireless communication systems is proposed, by harnessing the principles of quantum physics in wireless communications. More particularly, we conceive a pair of Rydberg atomic receivers, one incorporates a local oscillator (LO), referred to as an LO-dressed receiver, while the other operates without an LO and is termed an LO-free receiver. The appropriate wireless model is developed for each configuration, elaborating on the receiver's responses to the radio frequency (RF) signal, on the potential noise sources, and on the signal-to-noise ratio (SNR) performance. The developed wireless model conforms to the classical RF framework, facilitating compatibility with established signal processing methodologies. Next, we investigate the associated distortion effects that might occur, specifically identifying the conditions under which distortion arises and demonstrating the boundaries of linear dynamic ranges. This provides critical insights into its practical implementations in wireless systems. Finally, extensive simulation results are provided for characterizing the performance of wireless systems, harnessing this pair of Rydberg atomic receivers. Our results demonstrate that LO-dressed systems achieve a significant SNR gain of approximately 40~50 dB over conventional RF receivers in the standard quantum limit regime. This SNR head-room translates into reduced symbol error rates, enabling efficient and reliable transmission with higher-order constellations.

arXiv:2501.11842•IEEE Transactions on Wireless Communications•Jan 1, 2026•39 citations

Signal-Dependent Shot Noise Modeling of Rydberg Atomic Quantum Receivers: A Design Perspective

Qihao Peng, Qu Luo, Tierui Gong +8 more

In this paper, we develop a communication-oriented complex baseband equivalent model for superheterodyne Rydberg atomic quantum receivers (RAQRs). The model explicitly captures photodetection-induced signal-dependent shot noise and its coupling with the optical operating point. By leveraging an atomic superheterodyne architecture and a strong local oscillator, we construct a complex baseband representation for both the received signal and the signal-dependent shot noise under both direct incoherent optical detection and balanced coherent optical detection. The derived model reveals that the optical operating point jointly determines the normalized effective receive gain and the equivalent noise background, thereby establishing a traceable gain-noise tradeoff governed by system design. More importantly, the proposed model shows that neglecting signal-dependent shot noise may lead to inaccurate operating-point design. Finally, by extending to the multiple-input-multiple-output (MIMO) case, we derive a lower bound on the achievable rate while considering the signal-dependent shot noise. Our analysis \textcolor{black}{reveals} that the non-zero asymptotic rate of RAQ-MIMO and its superiority over conventional RF-MIMO hinge on the normalized noise floor of the RAQ receive chain falling below that of RF MIMO. Simulation results validate our analysis and yield practical, closed-form design guidelines for RAQR front ends, revealing parameter regimes in which RAQ-MIMO outperforms conventional MIMO systems.

arXiv:2605.10350•May 11, 2026•1 citation
This paper introduces the first Rydberg atomic quantum receiver (RAQR) for underwater wireless optical communications (UWOC). Unlike conventional RF-oriented Rydberg receivers, the proposed architecture exploits direct optical excitation of an atomic transition, enabling a compact threelevel configuration in which the received optical signal and an internally generated local oscillator jointly form the coupling field. The proposed receiver eliminates the dedicated coupling laser required by conventional four-level architectures while providing intrinsic spectral selectivity and strong rejection of ambient optical interference. A comprehensive analytical framework incorporating underwater attenuation, turbulence-induced fading, pointing errors, and angle-of-arrival interruptions is developed. Closed-form expressions for the outage probability, ergodic capacity, and bit error rate are derived, together with a quantum-advantage condition relative to a classical silicon photomultiplier (SiPM) receiver. Numerical results using experimentally demonstrated cesium parameters and representative oceanic channels demonstrate significant SNR and capacity gains over conventional direct-detection UWOC receivers, particularly under severe attenuation.
Rydberg atomic quantum receivers (RAQRs) have recently emerged as a promising technology for radio-frequency (RF) reception by directly transducing incident RF fields into optical signals. Existing receiver architectures, however, exploit only subsets of the dipole-allowed transitions within a given atomic manifold, limiting the number of simultaneously accessible RF channels. In this paper, a hybrid six-level Rydberg atomic quantum receiver (H-RAQR) is proposed by integrating parallel and cascaded RF coupling pathways within a single vapor-cell receiver. A communication-oriented analytical framework is developed by deriving a closed-form steady-state atom--field interaction model and establishing an equivalent baseband signal representation. The achievable ergodic sum rate is analyzed, and a resource-efficiency metric is introduced to quantify throughput per unit optical receiver resource. The analytical model is validated against full Lindblad master-equation simulations over its identified operating region. Numerical results show that the proposed H-RAQR supports four simultaneous RF channels within a single atomic system, achieves higher ergodic sum rate than conventional parallel Rydberg state (PRS) and cascade Rydberg state (CRS) receivers, and provides about 29% higher resource efficiency than a combined PRS-CRS deployment with equivalent four-band coverage. The proposed framework provides a scalable foundation for multi-band atomic wireless receivers.
Rydberg-atom quantum receivers (RAQRs) offer highly sensitive RF reception, but their communication performance depends jointly on atomic response, optical transduction, receiver noise, bandwidth, and wireless-channel conditions. This paper develops a BER-aware communication-theoretic framework for superheterodyne RAQR-assisted wireless communication, linking four-level Rydberg-atom dynamics and coherent optical detection to multipath propagation and digital communication performance. Closed-form instantaneous and average SNR and BER expressions are derived for square Gray-coded MMM-QAM over correlated Rayleigh fading. The RAQR operating point is then jointly optimized over atomic, optical, RF, and geometric parameters using analytical block-wise updates within a fixed-point procedure subject to physical and bandwidth constraints. Numerical results demonstrate substantial gains in low-power reception, bandwidth utilization, robustness to detuning, fading and delay spread, outage, and communication coverage compared with conventional, advanced, and fixed-point RAQR receivers. The results demonstrate that BER-aware joint optimization translates the intrinsic sensitivity of Rydberg-atom sensing into tangible communication-level gains.
An efficient three-color (3C) laser excitation-based Rydberg atomic quantum receiver (RAQR) architecture is investigated for wireless communications, utilizing a five-level (5L) electronic transition mechanism. Specifically, the conventional two-color (2C) RAQR with the four-level (4L) excitation faces three fundamental obstacles: 1) high cost and engineering challenges due to the reliance on unstable short-wavelength lasers; 2) a fundamental sensitivity limit in thermal atoms caused by residual Doppler broadening; and 3) the inability to detect low-frequency bands due to the energy-level constraint of two-photon resonance. To address these challenges, this paper analyzes a 3C5L-RAQR architecture with all-red/infrared lasers, which not only solves the engineering cost issues but also enables effective Doppler cancellation and low-frequency detection by exploiting the three-photon resonance. Bridging atomic physics and communication theory, an end-to-end equivalent baseband signal model is derived. Furthermore, the performance of different RAQR architectures is evaluated in terms of sensitivity, achievable rate and spectrum access range. Moreover, we provide an exact numerical solution for practical RAQRs by employing the Liouvillian superoperator formalism. Numerical results demonstrate that the exhibited 3C5L-RAQR achieves superior sensitivity compared to the conventional 2C4L-RAQR and a classical antenna-based radio frequency receiver for weak-signal detection. Finally, the inherent sensitivity-rate trade-off is revealed, showing that the 3C5L-RAQR is more suitable for deployment in power-limited communication scenarios demanding broad spectrum access.
The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.
The intrinsic integration of Rydberg atomic receivers into wireless communication systems is proposed, by harnessing the principles of quantum physics in wireless communications. More particularly, we conceive a pair of Rydberg atomic receivers, one incorporates a local oscillator (LO), referred to as an LO-dressed receiver, while the other operates without an LO and is termed an LO-free receiver. The appropriate wireless model is developed for each configuration, elaborating on the receiver's responses to the radio frequency (RF) signal, on the potential noise sources, and on the signal-to-noise ratio (SNR) performance. The developed wireless model conforms to the classical RF framework, facilitating compatibility with established signal processing methodologies. Next, we investigate the associated distortion effects that might occur, specifically identifying the conditions under which distortion arises and demonstrating the boundaries of linear dynamic ranges. This provides critical insights into its practical implementations in wireless systems. Finally, extensive simulation results are provided for characterizing the performance of wireless systems, harnessing this pair of Rydberg atomic receivers. Our results demonstrate that LO-dressed systems achieve a significant SNR gain of approximately 40~50 dB over conventional RF receivers in the standard quantum limit regime. This SNR head-room translates into reduced symbol error rates, enabling efficient and reliable transmission with higher-order constellations.
In this paper, we develop a communication-oriented complex baseband equivalent model for superheterodyne Rydberg atomic quantum receivers (RAQRs). The model explicitly captures photodetection-induced signal-dependent shot noise and its coupling with the optical operating point. By leveraging an atomic superheterodyne architecture and a strong local oscillator, we construct a complex baseband representation for both the received signal and the signal-dependent shot noise under both direct incoherent optical detection and balanced coherent optical detection. The derived model reveals that the optical operating point jointly determines the normalized effective receive gain and the equivalent noise background, thereby establishing a traceable gain-noise tradeoff governed by system design. More importantly, the proposed model shows that neglecting signal-dependent shot noise may lead to inaccurate operating-point design. Finally, by extending to the multiple-input-multiple-output (MIMO) case, we derive a lower bound on the achievable rate while considering the signal-dependent shot noise. Our analysis \textcolor{black}{reveals} that the non-zero asymptotic rate of RAQ-MIMO and its superiority over conventional RF-MIMO hinge on the normalized noise floor of the RAQ receive chain falling below that of RF MIMO. Simulation results validate our analysis and yield practical, closed-form design guidelines for RAQR front ends, revealing parameter regimes in which RAQ-MIMO outperforms conventional MIMO systems.