Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Electronics Symposium (IES)

Implementation of V2V Communication Security on LoRa-Based Physical Layer Key Generation

Ezekiel Furqon Patongai, Mike Yuliana, Amang Sudarsono

Published Aug 5, 2025• 0 citations
Publisher

Abstract

With the rise of connected vehicular networks, Vehicle-to-Vehicle (V2V) communication has become a fundamental enabler for intelligent transportation systems. However, the open nature of wireless channels introduces risks such as eavesdropping and key compromise. To address these issues, we propose a secure V2V communication scheme based on Physical Layer Key Generation (PLKG) using LoRa technology. The proposed system utilizes Received Signal Strength Indicator (RSSI) measurements between two moving vehicles as the entropy source. To improve the channel correlation, a Savitzky-Golay filter is applied as a preprocessing step. Adaptive multibit quantization is then used to convert the RSSI into binary sequences, followed by the Cascade algorithm for error reconciliation. To enhance randomness, privacy amplification is applied using universal hashing and SHA-1. Finally, the generated key is used for AES-128 encryption. The system is implemented on Raspberry Pi 4B using AcSiP EK-S76SXB and RAK2245 LoRa modules. Experimental validation was conducted in three movement scenarios firstly both vehicle move from opposite-direction at$\mathbf{1 0 ~ k m} / \mathbf{h}$for$\mathbf{3 0 0}$meters, secondly both vehicle move at the same-direction at$\mathbf{1 0 ~ k m} / \mathbf{h}$for$\mathbf{8 0 0}$meters, and lastly same as the second scenario but with different speed at$20 ~\text{km} / \mathrm{h}$. Results shown that the system achieves a reliable key generation rate (KGR) of up to 176075.73 bit/s while maintaining low computation time, demonstrating its feasibility for secure real-time V2V communication.

DOI
10.1109/ies67184.2025.11160708

Related papers

Enhancing Key Generation Rate in LoRa-Based V2I Secret Key Generation Using Segment-Based Privacy Amplification

Muhammad Nizamudin Mahfud, Mike Yuliana, Weny Mistarika Rahmawati +2 more

Physical layer secret key generation (SKG) provides a promising solution for securing vehicle-toinfrastructure (V2I) communications by exploiting the inherent reciprocity of wireless channels. However, received signal strength indicator (RSSI) fluctuations, quantization mismatches, and constrained key generation rates present significant challenges in highly dynamic LoRa-based environments. This paper proposes an SKG framework that integrates Kalman filter, Guard Band Multibit Quantization (GBMQ), Cascade reconciliation, and SHA-1 based privacy amplification. Experimental evaluations were conducted across multiple urban V2I operational scenarios. The results demonstrate that the Kalman filter effectively enhances RSSI correlation, while the GBMQ scheme substantially minimizes the key disagreement rate (KDR) compared to the conventional Adaptive Multibit Quantization method. Furthermore, the remaining bit mismatches are completely eliminated via Cascade reconciliation, achieving a 0% KDR in all evaluated environments. Finally, the privacy amplification stage successfully generates secure cryptographic keys that exhibit robust randomness properties, confirming the efficacy of the proposed framework for resilient physical layer security in V2I networks.

International Electronics Symposium (IES)•Aug 1, 2026•0 citations

Implementation of Secret Key Generation Scheme in LoRa-Based Smart Agriculture

Nayla Ainun Nisa, Mike Yuliana, Norma Ningsih

The increasing adoption of Internet of Things technology in agricultural environments requires secure and efficient wireless communication systems. This paper analyzes the performance of Secret Key Generation (SKG) based on Received Signal Strength Indicator (RSSI) using two Antares LR ESP-201 nodes communicating through LoRa in an outdoor agricultural environment in the presence of a passive eavesdropper. The proposed method combines preprocessing using Savitzky–Golay Filter, 2-ary quantization, reconciliation using Reed–Solomon Code, and privacy amplification using Universal Hash and SHA-1. Experiments were conducted under three movement scenarios with different node movement directions to evaluate key generation performance. Results show that the preprocessing stage significantly improves RSSI correlation, achieving a correlation coefficient of up to 0.991. The proposed system achieves a Key Generation Rate (KGR) of up to 4.20 bit/s and successfully reduces the Key Disagreement Rate (KDR) to 0% after reconciliation. In addition, the universal hash function increases entropy, resulting in a 128-bit cryptographic key. The generated 128-bit secret key is subsequently used as the symmetric encryption key for AES-128 to secure data transmission between IoT nodes. These results demonstrate that the proposed method can generate reliable and secure secret keys for LoRa-based Internet of Things applications in smart agriculture.

International Electronics Symposium (IES)•Aug 1, 2026•0 citations

Performance Analysis of Physical Layer Key Generation (PLKG) Scheme in Static Environment-based LoRa

Mike Yuliana, Aodry Ardhana, Amang Sudarsono +1 more

Since the emergence of Internet of Things (IoT) technology on the surface a few years ago, this IoT technology has been advancing. It has attracted the attention of cybercriminals. One of the cybercrime targets is the security of key management systems and their distribution schemes. This paper offers a solution to this issue by using a physical layer key generation (PLKG) scheme which utilizes the received signal strength indicator (RSSI) from a Long Range (LoRa) device as a key extraction source. The proposed scheme utilizes several methods. Polynomial fitting is used for the initial fitting process, 2-Ary quantization for conversion of RSSI to multibit, BCH to correct the difference in bits obtained between the two authorized users, privacy amplification for increased randomness, and AES-128 for encryption of sent messages. The expected outcome of this paper is that the scheme developed can generate keys with high approximate entropy and fulfills randomness requirements so that there is no need to distribute keys between authorized users. Testing the success of the scheme will be carried out in indoor and outdoor environments with static user positions. The test results show that the keys generated in all scenarios meet the randomness requirements with approximate entropy values above 0.01.

International Electronics Symposium (IES)•Aug 6, 2024•1 citation

LoRa-LiSK: A Lightweight Shared Secret Key Generation Scheme for LoRa Networks

Aisha Kanwal Junejo, Fatma Benkhelifa, Boon Wong +1 more

Physical-layer security (PLS) schemes use the randomness of the channel parameters, namely, channel state information (CSI) and received signal strength indicator (RSSI) to generate the secret keys. There has been limited work in PLS schemes in long-range (LoRa) wide-area networks (LoRaWANs) which hinder their widespread application. Limitations observed in existing studies include the requirement of high correlation between channel parameter measurements for secret key generation in the proposed schemes and the evaluation of the schemes has only been done in either fully indoor or outdoor environments. The real-world wireless sensor networks (WSNs) and LoRa use cases might not meet both requirements thus making the current PLS schemes inappropriate for these systems. By considering the limitations found in existing PLS schemes, this article proposes LoRA-LiSK, a practical and efficient shared secret key generation scheme for LoRa networks. Our proposed LoRa-LiSK scheme consists of several preprocessing techniques (timestamp matching, two sample Kolmogorov–Smirnov tests, and a Savitzky–Golay filter), multilevel quantization, information reconciliation using Bose–Chaudhuri–Hocquenghem (BCH) codes, and finally, privacy amplification using secure hash algorithm SHA-2. The LoRa-LiSK scheme is extensively evaluated on real WSN/IoT devices in practical application scenarios: 1) indoor to outdoor and 2) LoRa static and mobile outdoor links. It outperforms existing schemes by generating keys with channel parameter measurements of low correlation values (0.2–0.6), while still essentially achieving high key generation rates, and low key disagreement rates (10%–20%). The scheme updates a key in approximately 1 h using an application profile with high transmission rate compared to 3 h reported by existing works while still respecting the duty cycle regulation. It also incurs less communication overhead compared to the existing works.

IEEE Internet of Things Journal•Aug 6, 2021•57 citations

Distributed Physical Layer Key Generation for Secure LPWAN Communication

Biao Han, Sirui Peng, Xiaoyan Wang +1 more

Low-Power Wide Area Networks (LPWAN) has emerged as the dominant open specification in recent years due to its ability to offer affordable connectivity to the low-power devices distributed over large geographical areas. However, security issues have not been fully addressed in LPWAN specifications, especially, key distribution and key management. Physical layer key generation, which exploits wireless channel reciprocity and randomness to generate secure keys, has attracted considerable attention in recent years. In this paper, we exploit the physical layer key generation problem in LPWAN communication and present a distributed and lightweight key generation scheme for Long Range (LoRa) based network. It explores the shared randomness extracted from measured RSSI (Received Signal Strength Indicator) as consensus information to generate secure keys. To negotiate the RSSI signal as a bidirectional consistent key sequence, we propose a novel level-crossing quantization algorithm with an improved Cascade key agreement protocol to improve the key generation rate, as well as to avoid information leakage during transmission. We implement the proposed physical layer key generation scheme in a LoRa network prototype. Then we conduct extensive experiments in stationary and mobile indoor environments to evaluate the efficiency of the proposed key generation scheme. Experimental results show that its achievable key rate can reach 29.5% in stationary scenario and 35.5% in mobile scenario. Its key generation rate can exceed 1 bit/s with a lightweight implementation on the LoRa network prototype. For the 128-bit key sequence, it passes the the NIST suite of statistical tests.

IEEE International Conference on Parallel and Distributed Systems (ICPADS)•Dec 1, 2019•9 citations

Channel State Information-Based Cryptographic Key Generation for Intelligent Transportation Systems

Soheyb Ribouh, Kelvin Huy-Trung Phan, Arnav Vaibhav Malawade +3 more

Due to the sensitivity of the information exchanged in Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I) communication, generating secret keys is critical to secure these communications. As nature is open access, distributed keys are more vulnerable to attacks in the vehicular environment. Physical layer key generation methods using wireless channel characteristics show promise in preventing such attacks, generating keys independently, and removing the need for distribution. In this paper, we present a novel key generation approach in a real vehicular environment based on Channel State Information (CSI), including a new algorithm for key bit extraction. We implemented our algorithm using USRP B210 Software-Defined Radios (SDR) and the industry-standard V2X communication protocol: IEEE 802.11p. The proposed key generation protocol uses the CSI values of each sub-carrier as a source of randomness, from which bits are extracted using a new QAM demodulator quantizer (QAM-Dem-Quan). We compared our technique to state-of-the-art Received Signal Strength (RSS)-based approaches, and show that our method achieves better performance. Moreover, we reached a min-entropy of approximately 70% for the generated keys and a key generation rate of less than$150~\mu \text{s}$/key for key lengths ranging from 16 to 128 bits.

IEEE Transactions on Intelligent Transportation Systems•Jul 8, 2020•54 citations
With the rise of connected vehicular networks, Vehicle-to-Vehicle (V2V) communication has become a fundamental enabler for intelligent transportation systems. However, the open nature of wireless channels introduces risks such as eavesdropping and key compromise. To address these issues, we propose a secure V2V communication scheme based on Physical Layer Key Generation (PLKG) using LoRa technology. The proposed system utilizes Received Signal Strength Indicator (RSSI) measurements between two moving vehicles as the entropy source. To improve the channel correlation, a Savitzky-Golay filter is applied as a preprocessing step. Adaptive multibit quantization is then used to convert the RSSI into binary sequences, followed by the Cascade algorithm for error reconciliation. To enhance randomness, privacy amplification is applied using universal hashing and SHA-1. Finally, the generated key is used for AES-128 encryption. The system is implemented on Raspberry Pi 4B using AcSiP EK-S76SXB and RAK2245 LoRa modules. Experimental validation was conducted in three movement scenarios firstly both vehicle move from opposite-direction at10 km/h\mathbf{1 0 ~ k m} / \mathbf{h}10 km/hfor300\mathbf{3 0 0}300meters, secondly both vehicle move at the same-direction at10 km/h\mathbf{1 0 ~ k m} / \mathbf{h}10 km/hfor800\mathbf{8 0 0}800meters, and lastly same as the second scenario but with different speed at20 km/h20 ~\text{km} / \mathrm{h}20 km/h. Results shown that the system achieves a reliable key generation rate (KGR) of up to 176075.73 bit/s while maintaining low computation time, demonstrating its feasibility for secure real-time V2V communication.
Physical layer secret key generation (SKG) provides a promising solution for securing vehicle-toinfrastructure (V2I) communications by exploiting the inherent reciprocity of wireless channels. However, received signal strength indicator (RSSI) fluctuations, quantization mismatches, and constrained key generation rates present significant challenges in highly dynamic LoRa-based environments. This paper proposes an SKG framework that integrates Kalman filter, Guard Band Multibit Quantization (GBMQ), Cascade reconciliation, and SHA-1 based privacy amplification. Experimental evaluations were conducted across multiple urban V2I operational scenarios. The results demonstrate that the Kalman filter effectively enhances RSSI correlation, while the GBMQ scheme substantially minimizes the key disagreement rate (KDR) compared to the conventional Adaptive Multibit Quantization method. Furthermore, the remaining bit mismatches are completely eliminated via Cascade reconciliation, achieving a 0% KDR in all evaluated environments. Finally, the privacy amplification stage successfully generates secure cryptographic keys that exhibit robust randomness properties, confirming the efficacy of the proposed framework for resilient physical layer security in V2I networks.
The increasing adoption of Internet of Things technology in agricultural environments requires secure and efficient wireless communication systems. This paper analyzes the performance of Secret Key Generation (SKG) based on Received Signal Strength Indicator (RSSI) using two Antares LR ESP-201 nodes communicating through LoRa in an outdoor agricultural environment in the presence of a passive eavesdropper. The proposed method combines preprocessing using Savitzky–Golay Filter, 2-ary quantization, reconciliation using Reed–Solomon Code, and privacy amplification using Universal Hash and SHA-1. Experiments were conducted under three movement scenarios with different node movement directions to evaluate key generation performance. Results show that the preprocessing stage significantly improves RSSI correlation, achieving a correlation coefficient of up to 0.991. The proposed system achieves a Key Generation Rate (KGR) of up to 4.20 bit/s and successfully reduces the Key Disagreement Rate (KDR) to 0% after reconciliation. In addition, the universal hash function increases entropy, resulting in a 128-bit cryptographic key. The generated 128-bit secret key is subsequently used as the symmetric encryption key for AES-128 to secure data transmission between IoT nodes. These results demonstrate that the proposed method can generate reliable and secure secret keys for LoRa-based Internet of Things applications in smart agriculture.
Since the emergence of Internet of Things (IoT) technology on the surface a few years ago, this IoT technology has been advancing. It has attracted the attention of cybercriminals. One of the cybercrime targets is the security of key management systems and their distribution schemes. This paper offers a solution to this issue by using a physical layer key generation (PLKG) scheme which utilizes the received signal strength indicator (RSSI) from a Long Range (LoRa) device as a key extraction source. The proposed scheme utilizes several methods. Polynomial fitting is used for the initial fitting process, 2-Ary quantization for conversion of RSSI to multibit, BCH to correct the difference in bits obtained between the two authorized users, privacy amplification for increased randomness, and AES-128 for encryption of sent messages. The expected outcome of this paper is that the scheme developed can generate keys with high approximate entropy and fulfills randomness requirements so that there is no need to distribute keys between authorized users. Testing the success of the scheme will be carried out in indoor and outdoor environments with static user positions. The test results show that the keys generated in all scenarios meet the randomness requirements with approximate entropy values above 0.01.
Physical-layer security (PLS) schemes use the randomness of the channel parameters, namely, channel state information (CSI) and received signal strength indicator (RSSI) to generate the secret keys. There has been limited work in PLS schemes in long-range (LoRa) wide-area networks (LoRaWANs) which hinder their widespread application. Limitations observed in existing studies include the requirement of high correlation between channel parameter measurements for secret key generation in the proposed schemes and the evaluation of the schemes has only been done in either fully indoor or outdoor environments. The real-world wireless sensor networks (WSNs) and LoRa use cases might not meet both requirements thus making the current PLS schemes inappropriate for these systems. By considering the limitations found in existing PLS schemes, this article proposes LoRA-LiSK, a practical and efficient shared secret key generation scheme for LoRa networks. Our proposed LoRa-LiSK scheme consists of several preprocessing techniques (timestamp matching, two sample Kolmogorov–Smirnov tests, and a Savitzky–Golay filter), multilevel quantization, information reconciliation using Bose–Chaudhuri–Hocquenghem (BCH) codes, and finally, privacy amplification using secure hash algorithm SHA-2. The LoRa-LiSK scheme is extensively evaluated on real WSN/IoT devices in practical application scenarios: 1) indoor to outdoor and 2) LoRa static and mobile outdoor links. It outperforms existing schemes by generating keys with channel parameter measurements of low correlation values (0.2–0.6), while still essentially achieving high key generation rates, and low key disagreement rates (10%–20%). The scheme updates a key in approximately 1 h using an application profile with high transmission rate compared to 3 h reported by existing works while still respecting the duty cycle regulation. It also incurs less communication overhead compared to the existing works.
Low-Power Wide Area Networks (LPWAN) has emerged as the dominant open specification in recent years due to its ability to offer affordable connectivity to the low-power devices distributed over large geographical areas. However, security issues have not been fully addressed in LPWAN specifications, especially, key distribution and key management. Physical layer key generation, which exploits wireless channel reciprocity and randomness to generate secure keys, has attracted considerable attention in recent years. In this paper, we exploit the physical layer key generation problem in LPWAN communication and present a distributed and lightweight key generation scheme for Long Range (LoRa) based network. It explores the shared randomness extracted from measured RSSI (Received Signal Strength Indicator) as consensus information to generate secure keys. To negotiate the RSSI signal as a bidirectional consistent key sequence, we propose a novel level-crossing quantization algorithm with an improved Cascade key agreement protocol to improve the key generation rate, as well as to avoid information leakage during transmission. We implement the proposed physical layer key generation scheme in a LoRa network prototype. Then we conduct extensive experiments in stationary and mobile indoor environments to evaluate the efficiency of the proposed key generation scheme. Experimental results show that its achievable key rate can reach 29.5% in stationary scenario and 35.5% in mobile scenario. Its key generation rate can exceed 1 bit/s with a lightweight implementation on the LoRa network prototype. For the 128-bit key sequence, it passes the the NIST suite of statistical tests.
Due to the sensitivity of the information exchanged in Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I) communication, generating secret keys is critical to secure these communications. As nature is open access, distributed keys are more vulnerable to attacks in the vehicular environment. Physical layer key generation methods using wireless channel characteristics show promise in preventing such attacks, generating keys independently, and removing the need for distribution. In this paper, we present a novel key generation approach in a real vehicular environment based on Channel State Information (CSI), including a new algorithm for key bit extraction. We implemented our algorithm using USRP B210 Software-Defined Radios (SDR) and the industry-standard V2X communication protocol: IEEE 802.11p. The proposed key generation protocol uses the CSI values of each sub-carrier as a source of randomness, from which bits are extracted using a new QAM demodulator quantizer (QAM-Dem-Quan). We compared our technique to state-of-the-art Received Signal Strength (RSS)-based approaches, and show that our method achieves better performance. Moreover, we reached a min-entropy of approximately 70% for the generated keys and a key generation rate of less than150 μs150~\mu \text{s}150 μs/key for key lengths ranging from 16 to 128 bits.