Gaussian-modulated continuous-variable quantum key distribution (CV-QKD) is a leading candidate for metropolitan-scale quantum-secure communication, yet a critical gap remains between composable finite-size security proofs and real-time FPGA post-processing constraints. We present a cross-layer feasibility analysis that jointly evaluates composable security bounds and projected FPGA resource budgets on a Xilinx Ultrascale+ platform. Our formulation incorporates realistic block sizes (N = 105− 108), channel loss, excess noise, and detector imperfections. Results show that finite-size effects reduce the maximum secure distance by 68.0% (N = 105vs. 108), and excess noise is the most critical impairment (50× increase reduces range by 32.6 km). We identify N = 107as the optimal operating point, achieving 79.6 km secure distance within a 120 ms single-frame latency budget. To address the gap between theoretical projection and physical implementation, we further provide preliminary post-synthesis results for the multidimensional LDPC reconciliation decoder on a Xilinx XCVU9P, confirming timing closure at 250 MHz with 12.9% LUT and 2.9% BRAM utilization at the recommended operating point.
Real-time waveform generation supports dynamic quantum circuits without pre-storing complete waveforms for every execution path. However, long-lived distortions in flux-control lines degrade gate fidelity, requiring compensation to account for the actual pulse history. A frequency-domain inversion and time-domain fitting method is proposed for resource-efficient real-time flux distortion compensation. The method fits the reconstructed compensation impulse response with a compact hybrid infinite impulse response (IIR) and finite impulse response (FIR) filter. Look-ahead parallelization enables this filter to process synthesized waveforms at 1.2GSa/s on a field-programmable gate array (FPGA). Two-qubit cross-entropy benchmarking shows that real-time IIR filtering achieves a median controlled-Z Pauli fidelity close to the software-reference value of 99.57%. Numerical analysis and FPGA synthesis indicate approximately logarithmic growth in hardware resource use with compensation timescale. Extending compensation from microsecond to hundred-microsecond timescales increases look-up table (LUT) and digital signal processing (DSP) resource use by only about 14% and 4%, respectively, while maintaining a relative arithmetic error below
10−4. This work provides a scalable hardware foundation for high-fidelity flux control in dynamic superconducting quantum circuits.
We present a real-time FPGA decoder for a high-rate
[[512,174,8]] 3D product qLDPC code. We construct a circuit-level detector-error model for a compact syndrome-extraction schedule and propose a small parallel ensemble of row-wise serial min-sum decoders with cumulative memory. The decoder matches
BP+OSD-CS10 accuracy with one core and Relay-BP accuracy with three cores. The FPGA implementation meets the latency budget of neutral-atom and trapped-ion systems. An ASIC implementation would improve the latency, enabling real time decoding even for superconducting systems. At a physical error rate of
p=10−3, three FPGA devices decode 174 logical qubits with a logical error rate of
5×10−7 and effective distance 6. For
p=10−4, and assuming the number of BP iterations is capped to 30, the decoder's average latency is
5.1\textmu s and its worst-case latency is
97.9\textmu s.