Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Circuits and Systems I Regular Papers

A 65-nm Cryo-CMOS-Based 4–7-GHz Wideband Noise-Canceling Receiver for Superconducting Multi-Qubits Readout

Juhui Jeong, Hyeonsik Ahn, Junhyeop Kim, Assyifa Nur Annisa Rizkia Putri, Dae-Yun Kim, Jae-Won Nam, Junghwan Han, Jusung Kim

Published Jan 1, 2026• 0 citations
Publisher

Abstract

This paper presents a 4–7GHz cryogenic readout integrated circuit (ROIC) implemented in a 65-nm CMOS process for superconducting multi-qubit readout. The proposed ROIC front-end employs a transformer (TF)-based dual-path noise-canceling low-noise amplifier and a TF-based current-bleeding active mixer to enhance gain while suppressing thermal and flicker noise. To realize a wide dynamic range and a large intermediate frequency (IF) bandwidth, a dB-linear broadband (435MHz) variable-gain amplifier with an active-RC feedback topology is employed for multi-qubit sensing. The fabricated ROIC operates at a cryogenic temperature (13K), achieving a maximum gain of 70.4dB and a minimum noise figure of 0.41dB (29K noise temperature) over 435MHz IF bandwidth. The input 1-dB compression point and the input third-order intercept point reach–59.8dBm and–50.4dBm at the maximum gain setting, and–29.8dBm and–20.7dBm at the minimum gain setting, respectively. The ROIC achieves a spurious-free dynamic range of 30.8dB and 50.6dB at maximum and minimum gain settings, respectively, demonstrating competitive performance among reported cryogenic ROICs. The prototype consumes 16.3mW from a 1.2-V supply at 13K with an active area of 1.45 mm2.

DOI
10.1109/tcsi.2026.3732161

Related papers

A 4-to-7GHz, 52.3dB SFDR, and 48K Noise Temperature Cryo-CMOS based Noise-Canceling Receiver for Superconducting Multi-Qubits Read-Out

Hyeonsik Ahn, Juhui Jeong, Putri Assyifa Nur Annisa Rizk +4 more

Quantum computers (QCs) can perform certain computational problems exponentially faster than classical computers due to the superposition and entanglement properties of quantum bits (qubits). Among the various qubit technologies, superconducting qubits offer the fastest computational speed and are easy to fabricate, making them a strong candidate for large-scale QC systems with the potential to reduce both cost and complexity [1]. To execute practical quantum algorithms with real-time quantum error correction, thousands of qubits must be simultaneously controlled and read out much faster than the coherence time of the qubits ($\ll \sim 120 \mu \mathrm{~s}$). Current approaches require thousands of cables connecting the qubits to bulky room temperature (RT) equipment, which severely limits the scalability of control and readout electronics for QC systems with more than $10^{3}$ qubits. To address this issue, the electronic interfaces must be placed in close proximity to the qubits, or ideally co-integrated and operated at similar cryogenic temperatures (CTs) with the qubits [1, 2]. This work proposes a 4 -to7 GHz single-chip fully integrated readout integrated circuit (ROIC) with 48 K noise temperature measured at $26 \mathrm{~K}, 253 \mathrm{MHz} \mathrm{IF}$ bandwidth (BW), and 52.3 dB spurious-free dynamic range (SFDR) for compatibility with superconducting multi-qubits read-out.

IEEE Asian Solid-State Circuits Conference (A-SSCC)•Nov 2, 2025•1 citation

A 5.5-7.9 GHz Double Quadrature Cryo-CMOS Receiver Featuring a Wideband Noise Matching LNA for Quantum Applications

Zixun Gao, Chenglong Liang, Suyuan Gan +5 more

This work introduces a broadband cryogenic receiver for scalable multiplexed readout of qubits. The receiver utilizes a double quadrature architecture with amplitude and phase error suppression. The hybrid poly-phase filter (PPF) is applied in the architecture to further reduce the input amplitude and phase errors at the radio frequency (RF) end, enhancing the circuit's overall error vector magnitude (EVM). To address the issue of wide bandwidth (BW) for qubit expansion, a low noise amplifier (LNA) with broadband input and noise matching and an improved four-input intermediate frequency amplifier (IF-AMP) with a resistance feedback structure are proposed, achieving a broadband gain response with high flatness. The chip has been designed in standard 55 nm CMOS technology. The LNA achieves a measured power gain of 27.4 dB at 5 GHz with a -3 dB BW of 5.2 GHz at 6 K. Across the entire band of interest, the measured noise figure (NF) deviates by just 0.15 dB from the minimum noise figure (NFmin) and less than 2 dB at 300K, while the measured cryogenic NF falls within the range of 0.79-1 dB. The LNA consumes only 5.5 mW from a 1.2 V supply. Simulation results of the designed receiver indicate that it delivers an average gain of 49.5 dB with a -3 dB BW of 2.4 GHz and an image rejection ratio (IRR) exceeding 40 dB at 300 K.

IEEE International Symposium on Circuits and Systems proceedings•May 25, 2025•2 citations

A 4.2-to-7.4-GHz Double Quadrature Cryo-CMOS Receiver Achieving 45.4 dB IRR for Quantum Applications

Zixun Gao, Chenglong Liang, Bingjun Tang +5 more

A 4.2-to-7.4-GHz wideband cryogenic receiver is presented and implemented using a double quadrature (DQ) architecture in a 55-nm CMOS process. The proposed receiver incorporates a magnetically coupled resonator (MCR)-based low- noise amplifier (LNA) with a multi-coil input matching network, enabling ultra-low differential amplitude and phase error while achieving wideband noise matching. A hybrid poly-phase filter (PPF) is proposed as a quadrature generator to further minimize low quadrature error in the radio frequency (RF) front end. To support wide bandwidth (BW) for qubit expansion with high flatness, a gain compensation technique is implemented through the synergy of the MCR-based LNA with dual-peak tuning, a sub-1-dB ultra-flat gain mixer and an improved four-input intermediate frequency amplifier (IF-AMP) with resistance feedback structure. Measured at 6 K, the receiver achieves a maximum gain of 52 dB with a -7 dB BW of 3.2 GHz. The simulation result shows that the image rejection ratio (IRR) is above 45.4 dB at 300 K. Further measurement results will be given.

IEEE MTT-S International Wireless Symposium (IWS)•May 19, 2025•0 citations

A Cryo-Tolerant >40-dB IRR, 4.7–7.9-GHz Double Quadrature Cryo-CMOS Receiver With a Broadband LNA for Scalable Quantum Applications

Zixun Gao, Chenglong Liang, Ruixin Liang +7 more

This article presents a cryogenic CMOS receiver operating across 4.7–7.9 GHz for frequency-division multiplexing (FDM) quantum state readout. The designed receiver employs a double quadrature (DQ) architecture and a hybrid poly-phase filter (PPF) is proposed to achieve an impressive image rejection ratio (IRR) to meet the 99.99% higher fidelity requirements in quantum error correction (QEC). In addition, gain tuning at different stages of the low noise amplifier (LNA) facilitates a broadband gain and flatness, while the subsequent receiver chains of a broadband mixer and an improved four-input intermediate frequency amplifier (IF-AMP) provide further gain compensation. Fabricated with a standard 55-nm CMOS technology, the LNA achieves a measured power gain of 27.4 dB, with a −3-dB bandwidth (BW) of 5.2 GHz at 6 K. The measured cryogenic noise figure (NF) ranges from 0.79 to 1 dB consuming merely 5.5 mW from a 1.2-V supply. Overall receiver measurements demonstrate a peak gain of 48.2 dB, a −5-dB flatness of 3.2 GHz, and an IRR that exceeds 40 dB at 6 K. These results demonstrate the receiver’s capacity for high-fidelity qubits’ state readout.

IEEE Transactions on Very Large Scale Integration (VLSI) Systems•Aug 26, 2025•2 citations

An Ultrawideband Cryogenic LNA in 40-nm CMOS for Multiple Spin/Superconducting Qubit Readout

Mahesh Kumar Chaubey, Yin‐Cheng Chang, Po‐Chang Wu +2 more

This letter presents an ultrawideband cryogenic low-noise amplifier (LNA) with current reuse and stacked inverter-based input-referred noise (IRN) cancellation in 40-nm CMOS. The first stage utilizes an IRN reduction high-$Q$gate inductor with current reuse, a stacked inverter-based shunt-resistive feedback input stage, and a cryogenically aware back-gate biasing technique to regulate the threshold voltage under cryogenic operation. The second stage is the common-source (CS) main amplifier, followed by a cascode current-reuse auxiliary amplifier to suppress the channel thermal noise of the main amplifier. The third stage is the current-reuse CS inverter-based postamplifier buffer stage. At 4 K, the LNA achieves a measured peak gain (${S} _{21}$) of 37 dB, with a large 3-dB bandwidth (BW) from 0.15 to 8 GHz and aNFminof 0.4 dB at 3.2 GHz under${P} _{\mathrm {DC}}$of 13.2 mW. To our knowledge, the proposed LNA achieves the BW bandwidth and the figure of merit (FoM) among the highest compared to published CMOS LNAs operating at 4 K. The proposed LNA is suitable for both spin and superconducting qubit readout.

IEEE Microwave and Wireless Technology Letters•Nov 24, 2025•2 citations

A 7.3–9.5-GHz Cryogenic LNA Based on Passive Noise Cancellation for Qubit State Readout

Yaoyu Li, Yanshu Guo, Tian Tian +4 more

A cryogenic low-voltage, broadband low-noise amplifier(LNA) has been designed for qubit state readout systems. The proposed LNA utilizes passive components for noise cancellation. A tri-coupled transformer is utilized to simultaneously achieve broadband input impedance matching and noise matching. Additionally, it incorporates capacitive feedback and an in-phase transformer to effectively cancel noise. Implemented in 28-nm bulk CMOS technology and verified at 10 K, the LNA achieves a maximum gain of 26.7 dB, a −3-dB bandwidth of 2.2 GHz, a lowest noise temperature (NT) of 25 K, a power consumption of 4.05 mW at 0.6-V supply voltage, and a figure of merit (FoM) of 0.12 dB/mW/ph, which is comparable with the recent works.

IEEE Microwave and Wireless Technology Letters•May 26, 2025•2 citations
This paper presents a 4–7GHz cryogenic readout integrated circuit (ROIC) implemented in a 65-nm CMOS process for superconducting multi-qubit readout. The proposed ROIC front-end employs a transformer (TF)-based dual-path noise-canceling low-noise amplifier and a TF-based current-bleeding active mixer to enhance gain while suppressing thermal and flicker noise. To realize a wide dynamic range and a large intermediate frequency (IF) bandwidth, a dB-linear broadband (435MHz) variable-gain amplifier with an active-RC feedback topology is employed for multi-qubit sensing. The fabricated ROIC operates at a cryogenic temperature (13K), achieving a maximum gain of 70.4dB and a minimum noise figure of 0.41dB (29K noise temperature) over 435MHz IF bandwidth. The input 1-dB compression point and the input third-order intercept point reach–59.8dBm and–50.4dBm at the maximum gain setting, and–29.8dBm and–20.7dBm at the minimum gain setting, respectively. The ROIC achieves a spurious-free dynamic range of 30.8dB and 50.6dB at maximum and minimum gain settings, respectively, demonstrating competitive performance among reported cryogenic ROICs. The prototype consumes 16.3mW from a 1.2-V supply at 13K with an active area of 1.45 mm2.
Quantum computers (QCs) can perform certain computational problems exponentially faster than classical computers due to the superposition and entanglement properties of quantum bits (qubits). Among the various qubit technologies, superconducting qubits offer the fastest computational speed and are easy to fabricate, making them a strong candidate for large-scale QC systems with the potential to reduce both cost and complexity [1]. To execute practical quantum algorithms with real-time quantum error correction, thousands of qubits must be simultaneously controlled and read out much faster than the coherence time of the qubits (≪∼120μ s\ll \sim 120 \mu \mathrm{~s}≪∼120μ s). Current approaches require thousands of cables connecting the qubits to bulky room temperature (RT) equipment, which severely limits the scalability of control and readout electronics for QC systems with more than 10310^{3}103 qubits. To address this issue, the electronic interfaces must be placed in close proximity to the qubits, or ideally co-integrated and operated at similar cryogenic temperatures (CTs) with the qubits [1, 2]. This work proposes a 4 -to7 GHz single-chip fully integrated readout integrated circuit (ROIC) with 48 K noise temperature measured at 26 K,253MHzIF26 \mathrm{~K}, 253 \mathrm{MHz} \mathrm{IF}26 K,253MHzIF bandwidth (BW), and 52.3 dB spurious-free dynamic range (SFDR) for compatibility with superconducting multi-qubits read-out.
This work introduces a broadband cryogenic receiver for scalable multiplexed readout of qubits. The receiver utilizes a double quadrature architecture with amplitude and phase error suppression. The hybrid poly-phase filter (PPF) is applied in the architecture to further reduce the input amplitude and phase errors at the radio frequency (RF) end, enhancing the circuit's overall error vector magnitude (EVM). To address the issue of wide bandwidth (BW) for qubit expansion, a low noise amplifier (LNA) with broadband input and noise matching and an improved four-input intermediate frequency amplifier (IF-AMP) with a resistance feedback structure are proposed, achieving a broadband gain response with high flatness. The chip has been designed in standard 55 nm CMOS technology. The LNA achieves a measured power gain of 27.4 dB at 5 GHz with a -3 dB BW of 5.2 GHz at 6 K. Across the entire band of interest, the measured noise figure (NF) deviates by just 0.15 dB from the minimum noise figure (NFmin) and less than 2 dB at 300K, while the measured cryogenic NF falls within the range of 0.79-1 dB. The LNA consumes only 5.5 mW from a 1.2 V supply. Simulation results of the designed receiver indicate that it delivers an average gain of 49.5 dB with a -3 dB BW of 2.4 GHz and an image rejection ratio (IRR) exceeding 40 dB at 300 K.
A 4.2-to-7.4-GHz wideband cryogenic receiver is presented and implemented using a double quadrature (DQ) architecture in a 55-nm CMOS process. The proposed receiver incorporates a magnetically coupled resonator (MCR)-based low- noise amplifier (LNA) with a multi-coil input matching network, enabling ultra-low differential amplitude and phase error while achieving wideband noise matching. A hybrid poly-phase filter (PPF) is proposed as a quadrature generator to further minimize low quadrature error in the radio frequency (RF) front end. To support wide bandwidth (BW) for qubit expansion with high flatness, a gain compensation technique is implemented through the synergy of the MCR-based LNA with dual-peak tuning, a sub-1-dB ultra-flat gain mixer and an improved four-input intermediate frequency amplifier (IF-AMP) with resistance feedback structure. Measured at 6 K, the receiver achieves a maximum gain of 52 dB with a -7 dB BW of 3.2 GHz. The simulation result shows that the image rejection ratio (IRR) is above 45.4 dB at 300 K. Further measurement results will be given.
This article presents a cryogenic CMOS receiver operating across 4.7–7.9 GHz for frequency-division multiplexing (FDM) quantum state readout. The designed receiver employs a double quadrature (DQ) architecture and a hybrid poly-phase filter (PPF) is proposed to achieve an impressive image rejection ratio (IRR) to meet the 99.99% higher fidelity requirements in quantum error correction (QEC). In addition, gain tuning at different stages of the low noise amplifier (LNA) facilitates a broadband gain and flatness, while the subsequent receiver chains of a broadband mixer and an improved four-input intermediate frequency amplifier (IF-AMP) provide further gain compensation. Fabricated with a standard 55-nm CMOS technology, the LNA achieves a measured power gain of 27.4 dB, with a −3-dB bandwidth (BW) of 5.2 GHz at 6 K. The measured cryogenic noise figure (NF) ranges from 0.79 to 1 dB consuming merely 5.5 mW from a 1.2-V supply. Overall receiver measurements demonstrate a peak gain of 48.2 dB, a −5-dB flatness of 3.2 GHz, and an IRR that exceeds 40 dB at 6 K. These results demonstrate the receiver’s capacity for high-fidelity qubits’ state readout.
This letter presents an ultrawideband cryogenic low-noise amplifier (LNA) with current reuse and stacked inverter-based input-referred noise (IRN) cancellation in 40-nm CMOS. The first stage utilizes an IRN reduction high-QQQgate inductor with current reuse, a stacked inverter-based shunt-resistive feedback input stage, and a cryogenically aware back-gate biasing technique to regulate the threshold voltage under cryogenic operation. The second stage is the common-source (CS) main amplifier, followed by a cascode current-reuse auxiliary amplifier to suppress the channel thermal noise of the main amplifier. The third stage is the current-reuse CS inverter-based postamplifier buffer stage. At 4 K, the LNA achieves a measured peak gain (S21{S} _{21}S21​) of 37 dB, with a large 3-dB bandwidth (BW) from 0.15 to 8 GHz and aNFminof 0.4 dB at 3.2 GHz underPDC{P} _{\mathrm {DC}}PDC​of 13.2 mW. To our knowledge, the proposed LNA achieves the BW bandwidth and the figure of merit (FoM) among the highest compared to published CMOS LNAs operating at 4 K. The proposed LNA is suitable for both spin and superconducting qubit readout.
A cryogenic low-voltage, broadband low-noise amplifier(LNA) has been designed for qubit state readout systems. The proposed LNA utilizes passive components for noise cancellation. A tri-coupled transformer is utilized to simultaneously achieve broadband input impedance matching and noise matching. Additionally, it incorporates capacitive feedback and an in-phase transformer to effectively cancel noise. Implemented in 28-nm bulk CMOS technology and verified at 10 K, the LNA achieves a maximum gain of 26.7 dB, a −3-dB bandwidth of 2.2 GHz, a lowest noise temperature (NT) of 25 K, a power consumption of 4.05 mW at 0.6-V supply voltage, and a figure of merit (FoM) of 0.12 dB/mW/ph, which is comparable with the recent works.